Free Goods redetermination

Hi,
In our free goods scenario, free goods condition records are maintained based on a custom field in additional data tab of customer master. This field is pulled into the item level additional data in sales order.
Based on the condition record and the field value for a particular customer, the free goods are determined correctly after entering the main material in the order. But the problem is when we change this field value manually in the sales order, the system does not redetermine the new free goods as per the condition record maintained for this new field value. Redetermination happens only when the main item quantity is changed.
We want to trigger a free goods redetermination whenever we change the custom field value in the sales order item level additional data tab.
How to achieve this? Are you aware of any user exit that can be used for "free goods redetermination" in sales order?
Thanks in advance

Thanks for your quick reply Sagar
I will explain the scenario little more elaborately. Free gods condition record is maintained like this :
Sales Org : S1
Division : D1
Custom field : Z1
Material :M1
Free goods = Material M2
Second condition record is maintained as below :
Sales Org : S1
Division : D1
Custom field : Z2
Material :M1
Free goods = Material M3
Now if we create a sales order and if the first condition record is found, the free goods is determined as M2.
Now if we change the custom field from Z1 to Z2 in the order, then the system should redetermine the free goods and pick up the second condition record - i.e., material M3 should be determined as free goods in the order.
Since the key field value of the access has changed, the system should again check and pick up the relevant condition record. This is similiar to changing a key field value in normal pricing accesses where the system automatically "carries out new pricing" and redetermines the relevant condition record. But it is not happening in the free goods scenario since the system "does not carry out new free goods determination" in case of a key field value change.
Hence I want to know if there is any user exit where we can force free goods redetermination (like " MV45AFZB - FORM userexit_new_pricing_vbkd CHANGING new_pricing " for pricing)
Thanks in advance

Similar Messages

How to restrict manual changing of free goods in sales order

Hi ,
Goodmorning ,
We have some requirement : In sales order free goods quantity determination by system should not be allowed to change manually , where can we do this ?
Looking for your inputs
Thanks and regards
Venkat

As per SAP Standard, when the main Item quantity is changed, the Free Goods are redetermined. In this case any manual changes to Free Goods Quantities are lost.
But your requirement is for restricting the Chages of the Quantity of Free Goods Correct?
I believe there is no SAP standard solution for this. You will have to apply a User Exit, which will check the Item category of each LIne item & if it is free goods (TANN) then changes are not permitted.
Hope this helps.
Thanks,
Jignesh Mehta

Free Goods - Not showing in sales order as subsequent item

Dear Gurus,
I have created a Free Goods procedure determination and maintained it at Customer/ Material level in VBN01.
The procedure is inclusive as follow:
For every 100 units purchased, the customer gets 10 units free
However at sales order level there is no indication at all that the Free Goods are being triggered.
When I check the pricing procedure, the condition record NA00 that I have used doesn't show-up.
There is no subsequent item in the sales order under the main item showing the Free-Goods discount.
Could you please help me go through the customizing process to correct the error?
Many thanks for your help
Chris

Hi,
FYI
Free goods can be configured in SAP by following two methods.
(1) Manually
(2) Automatically
Manually: By specifying higher level item category for a line item we can determine free goods as a free of charge
items during sales order processing.
Automatically: System proposes free of goods automatically in the sales order. In automatic free goods
configuration system follows two methods.
(1) Exclusive
(2) Inclusive
Exclusive: System configures free goods in exclusive option like free goods quantity is going to be excluded in
order quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 10 + 1.
Inclusive: System configures free goods in inclusive option like free goods quantity is going to be included in order
quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 9 + 1.
NOTE: In exclusive method other items also can be given as a free of charge items for order item.
Configuration steps: INCLUSIVE
SAP follows condition technique to configure free goods automatically.
Maintain pricing procedure
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Maintain pricing procedures
Choose free goods procedure NA0001 and select it
Click on copy icon on application tool bar and rename it Ex: SRI001
Condition type is NA00 and Access sequence also NA00
Save it and Exit
Activate free goods determination
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Activate free goods determination
Go to new entries
Specify our sales area, document pricing procedure, customer pricing procedure and specify our free goods
procedure Ex: SRI001
Save and Exit
Control free goods pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Control pricing for free goods item category
Choose item category TAN from position button
Specify the pricing as X = Pricing standard
Choose item category TANN from position button
Specify pricing as B = Pricing for free goods (100% discount)
Save and Exit
Maintain condition type for 100% discount
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain condition type for 100% discount
Check whether condition type R100 is available or not (R100 = is 100% discount)
Exit
Maintain pricing procedure for pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain pricing procedure for pricing
Choose our pricing procedure form position button and select it
Click on control data icon under dialog structure
Include condition type R100 between the steps of discounts.
Specify requirement = 55 and Routine No: 28 (100% discount) in Alt. CBV.
Save and Exit
Requirement 55: The Routine No. 55 is assigned to condition type R100. If the user wants to look both revenues
and sales deductions for the free items since the product that we are going to give as a free of charge item can be
sold separately in the same sales order. Then the item category of free goods TANN has the pricing value as B.
Then the system calculates value of the free goods as 100% discount as we discussed above the same material [that
is going to be given as a free of charge item]. Some times the same item is going to be given as a normal item.
Then system calculates price for normal item and system should not calculate price for same item [free of charge
item]. So as to perform this calculation we have to assign Requirement/Routine 55 is to assign condition type
R100.
Alt CBV = 28: [100% Discount] Condition type R100 should be taken as a ZERO value. The formula 28
calculates condition type R100 value as a ZERO.
Set Transfer of cost to Main item: [Copy control]: Transaction code: VTFL
Copy control is a concept by which the system copies the data from source document to target document.
Path:
IMG
Sales and Distribution
Basic functions
Pricing
Free goods
Control free goods pricing
Set transfer of cost to main item [copy control]
Choose Billing type F2 Delivery document type LF from position button
Select it and click on itemicon under dialog structure
Choose item category Ex: TAN
Click on details icon
Click on display or change icon
Choose item category as TAN again
Select it and click on details icon
Check cumulative cost
Save and Exit
Cumulative cost controls whether the cost value (VPRS) is to be copied from relevant sub items into main items.
Sub items cost are not relevant for billing.
Maintain copying control: Transaction code: VTAA
Path:
IMG
Sales and Distribution
Basic functions
Free goods
Control free goods pricing
Maintain copying control
We maintain copy control at item level category for free goods. In this field we can control whether the
free goods should also be transferred when we copy from one document to another document.
Choose source document type as QT and target document type as OR from position button
Select it and click on item control button under dialog structure
Choose AGN item category from position button
Click on display or change button
Again click on AGN
Click on details icon
Check Re u2013 explode structure/Free goods
Save and Exit
This indicator controls whether the free goods are copied from source document to target document or redetermined
again.
Maintain condition records for Free goods [INCLUSIVE]: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions
Free goods
VBN1 u2013 Create
Specify condition type NA00
Click on key combination
Specify all the data
Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the Material No., Minimum order quantity (Ex: 10), Specify [from] the free goods quantity (Ex:
10), Unit of measure u201CEAu201D (Each), Free goods (are free goods) as u201C1u201D.
Calculation procedure: We can specify the Routines for calculation procedure as 1 or 2 or 3
1 = Pro u2013 Rata (Proportionate): Ex: If the customer places order for 100 cases of material u201CXu201D, then customer
receives 20 cases of same material as free. That means, the business can say that buy 100 and get 20. If the
customer orders for 162 cases, then system automatically grants 32 cases as a free of cost (162x20/100 = 32 Cases).
2 = Unit of reference: When customer orders for 100 cases of material u201CXu201D, then the customer receives an
additional 20 cases as a free of goods. That means business can say that buy 100 get 20 free by granting 200 free
for every full of 100 cases. The customer places order for 162, then system automatically grants only 20 cases
(100x20/100=20).
3 = Whole unit: When a customer places order for 100 cases of material u201CXu201D, then the customer receives additional
20 cases of material u201CXu201D as a free of goods item. The business can say that buy 100 and get 20 free of charge items.
If the customer orders for increment of 100 that means 200 (100 + 100) items, then he gets 40. If he placed the
order for 101 u2013 199 items he gets only ZERO.
Save and Exit
Condition record for EXCLUSIVE: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions free goods
Specify the discount type u201CNA00u201D
Click on key combination
Click on Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the sales organization, distribution channel
Specify customer number and validity periods, material, minimum quantity, order quantity, unit of
measure, calculation procedure, free goods (3)
Specify additional material free goods (if other goods is going to be given as a free of charge item.
Save and Exit
Go to VA01 and raise the sales order for INCLUSIVE and EXCLUSIVE.
See the Free Goods effect.
Condition type NRAB = Free goods: Requirement = 59, Alt CBV = 29: [only for INCLUSIVE purpose]
Requirement 59: We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases
of product u201CXu201D, then he receives 10 cases of the product free. If the user would not like the additional line item in
the sales order for free goods rather than the discount of the 10 cases is represent in the same line item as other 90
cases. If the free goods discount should not apply on credit for returns that do not make reference in the previous
document.
Alt CBV 29: The condition type NRAB is to be assigned with 29 formula to support inclusive free goods
agreement where the user would have to apply the discount to the order item rather than having a sub item
generated for the free quantity.
Ex: The customer orders for 100 cases of product u201CXu201D, 10 cases are free instead of having a free sub item generated
b the system to represent the free 10 cases, the user would like to have a discount applied to the 100 cases line item
equal to the value of the 10 cases.
NOTE: Free goods can only be configured on document category type u201CCu201D (OR). That means we cannot configure
free goods on Inquiry and Quotation.
Header Conditions
SAP has delivered two kinds of condition types: (1) Header conditions
(2) Item conditions
Header conditions: The value of the header condition applies to the whole items in the sales document.
Header conditions do not have any access sequence.
So that, value of the header conditions should be maintained manually.
Ex: HA00, HB00
Configuration settings:
Include condition types HA00, HB00 in V/08 in between the discount condition types.
Go to VA01 and raise the sales order
Select line item and go to Go to button
Header Conditions
Include condition type HA00 HB00 with values [HA00 is percentage discount and HB00 is absolute
discount]
If HA00 = 1%, then system applies 1% on base value on all items in the sales order.
If HB00 = 100/- Rupees, then system applies 100/- Rupees proportionately to all items in the sales order. If sales
order has two items, then system applies 50/- Rupees to each item.
Click on activate button
Go to item condition screen
Check how system applied header conditions for line items
NOTE: Make sure that sales order contains more than one item.
Condition Scales
We can maintain scales for each and every condition type. So that we can determine pricing conditions values
depending upon the range of the order quantity.
Ex: If you maintain condition record for PR00 for material one as a 100/- Rs. For 1 material, then we can maintain
scales for this material like below:
From Quantity Price
1 u2013 10 1000
11 u2013 20 999
21 u2013 30 998
31 u2013 40 997
Configuration settings:
Go to VK11
Maintain condition record for PR00
Select line item and click on scales icon on the application tool bar
Maintain scales and scale rates accordingly
Save and Exit
Go to VA01 and raise the sales order
Enter the order quantity according to the scale and see the scale effect
Regards,
Siva

Free goods price discount when free goods are not required by customer

Hi
In a promotional activity for purchase of 10 items 2 free goods (which are different) have been determined, which is exclusive.
The customer wishes not to take the free goods and asks for a discount equivalent to the value of free goods, please advise on steps to be undertaken in this scenario.

Why dont u use "Pricing For Inclusive Free Goods Without Item Generation"
To do this, you can use the standard condition type NRAB. It is set up as follows:
It does not determine the discount from the condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
Hope this helps & Rewrad if does
Rgds

BAPI_SalesOrder_CreateFromDat2 fails for items with free goods

Hi all, I have a very weird problem when I am trying to create a sales order using SAP .net connector with the BAPI function BAPI_SalesOrder_CreateFromDat2(). The problem happens through the following scenario:
1 - Item X has a free good rule on it that states "If user buys 5 Cartoons of Item X he will take 1 pack of Item Y free of charge" while Item Z has no rules like this
2 - using BAPI and .net connector, an order is needed to be created with following details:
a - Item X with quantity 6 Cartoons.
b- Item Z with quantity 3 Cartoons
3 - If BAPI_SalesOrder_CreateFromDat2() assigns these details to Order_Items_In with the same order (a then b), SAP will return an error for Item z that states "No item category available (Table T184 ZKE NORM KEN)."; while if the function tries to create the order with details in reverse order (b then a ), the order will be created successfully.
I have done the following steps:
1 - Tried the same order in SAP GUI but it succeeded. (So no problem in Item Category Determination)
2 - Tries the same order with the suspicious order in the BAPI function Test inside SAP GUI (using tcode BAPI or SE37) but the function had not return any errors also.
3 - Tried to send Item Category in code when calling the bapi function (Forced the code to KEN), but the same message appeared as SAP insist on redetermining the Item Category and return this meaningless message.
thanks

Hi Mohamed Abd Elbaset,
I am facing the same issue while creating the Sales order through "BAPI_SALESORDER_CREATEFROMDAT2" All is going well in normal cases but when I process the contract with FREE GOODS line items for which free goods condition record is maintained it fails
to create the Sales order. Is there any special treatment for this Free goods case..
Regards,

Free Goods (Tax not charged to customer)

Hi to all Gurus
I m using inclusive free good and for this i am using R100 and NRAB the problem i m facing is this in case of compnay in which we are working tax on free is beared by the company not the customer.Now when i include the Taxes amount to R100 Discount value the Tax total figure is passed on to Net Value field for that item and it also effect the total net value by the tax amount because the tax is coming with - in net value(NETWR) and + in tax field (MWSBP). But the GL enteries are working fine this problem is only effecting the Net Value Field which is used for Standard Reports
I have also tried all the condition routines i.e 2 ,4 ,55 ,28,59,29
Kindly all of u through any solution to my problem

Why dont u use "Pricing For Inclusive Free Goods Without Item Generation"
To do this, you can use the standard condition type NRAB. It is set up as follows:
It does not determine the discount from the condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
Hope this helps & Rewrad if does
Rgds

How to realize the scenario of Inclusive Free Goods without Item Generation

I include the condition type NRAB in my pricing procedure, but it shows me that this condition ignored(requirement 059 not fulfilled).
why?

Hi,
Prerequisites
In the free goods master record in the Free goods category field, select free goods category 3 (inclusive free goods without item generation).
Follow the foll. procedure:
In free goods master data maintenance, this new free goods type is dealt with in the same way as the inclusive free goods procedure described above.
In order processing, you can not create order sub-items.
For pricing in the main item, you need to create a discount. The standard system provides pricing procedure RVAA01 and condition type NRAB.
Condition type NRAV is set up as follows:
It does not determine a discount from a condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
regards,
Siddharth.

Free goods is issued, but R100 discount is not triggered in proforma invoic

hi all,
free goods is determined in sales order with 100%discount for the free item, but in the proforma invoice (F5) the free item is coming with price. in copy controls between sales order and proforma invoice(F5) the pricing type is G "copy pricing elements unchanged and redetermine taxes. the item category is pricing with 100% discount.
thanks in advance

Hi
Free goods in sales order is picked mainly from condition type R100 thro your sales order Pricing Procedure( both inclusive or exclusive)
If you go to the details of R100 in V/06 there wont be access sequence
This R100 mainly works on requirement 55 in the pricinig procedure and alternate base value formula 28
that means this works on special ABAP routines
May be these routines might have a link to proforma billing type thro doc category proforma in VOFA details for F8 which makes this R100 as ineffective and hence prices are reflected there
Again these values are not going get carried to any GL accounts as this is a proforma only
Regards
Raja

Free goods with material determination

Hi All,
I have i query that for line item A material i need to give free good as X material. But there is the material determination to that particular material X with the material Y.
In this case how the system will redetermine? As of my knowledge as per the SAP standard free goods doesn't entertain any other like BOM, and variant config.
Please let me know the answer please!
Regards
RPS

You can use transaction VBN1 for assigning free goods.
Select discount type as ZFRG.
Select appropriate key combination.
You can restrict the free goods validity using Valid on - Valid To option.
Reward points if answer is useful.
Regards,
Pallavi.

R100 free goods determination

hi
The system automatically created a free goods sub- item for the order with purchase
order number ##LO605-ZA##14. The system runs pricing for this sub-item even
though it is free of charge.
Later i will give discount r100.but i need to know the settings like requirment 55???
Need to know what are the settings to do that in IMG??
Should i do something in determine item category for free good item like
ZA## / NORM / FREE / blank. but am not able to give blank in item category field??
Will reward points

Hi Gafoor,
The requirement 55 for R100 checks that the item category TANN in its pricing has the value ' B '. And only when this is true the condition is accessed.
<b>Inclusive Free Goods without Item Generation</b>
The standard system provides pricing procedure RVAA01 and condition type NRAB.
Condition type NRAB is set up as follows:
It does not determine a discount from a condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
Please reward if it helps.
Thanks & Regards
Sadhu Kishore

Free goods , contract, creating order

Hello SAP Prof,
1. what is the diff b/w Free goods and Bonus buy?
2. What is Rental Contract and service contract?
3. How can we create our own order ,
( we can copy std order.) But plz tell me how to create order with copy controls in detail.

Hi Rajesh
Free goods are considered to be merchandise, moveable belongings or personal property. Free goods are those which economists are not interested in because in free goods doe not offer the opportunity for creating a cost for usage. The best example of free goods is air because there is no scarity of air. Economists are interested only in goods, which can be manipulated to create cost for useage. Free goods are plentiful, you have as much as you want without a chance for future cost to society.
A bonus buy refers to any product manufactured or otherwise made available for purchase at a lower cost for a certain period of time. A bonus buy can relate to food, cars, stocks, bonds, insurance, bank loans or almost any product you can think of.
Examples of Bonus buys are: Buy one and get one free, 20% original price, 15% Reduced Mortgage today.
SERVICE CONTRACT:
A service contract is an arrangement between a service provider and service recipient and is characterized by a separate lease and service contract term. The lease usually ranges from 22 to 27 years while the service contract ranges from 13 to 18 years in length. The combination of the lease and service contract terms is typically 80% of the useful life of the asset. While the equity return is based on the overall term, depreciation occurs over 125% of the lease term only which differs from a pickle structure where depreciation occurs over the entire deal term. The participants in this type of transaction are the service provider or lessor, service recipient or lessee, operator, and customer. Typically, a service contract is used with assets such as gas, water, and power distribution networks and generation facilities. However, they can also be applied to real estate and securitization transactions.
A service contract is considered a property lease under section 7701(e) of the IRS Code if certain requirements hold. These requirements are divided into general and special criteria groups. Section 7701(e) outlines six criteria in the general case which indicate when a service contract should actually be classified as a lease:
If the service recipient is in physical possession of the property
If the service recipient controls the property
If the service recipient has a significant economic interest in the property
If the service provider has no economic risk in the contract
If the service provider does not provide services to a third party
If the contract price does not substantially exceed the rental value of the property
To obtain classification as a service contract, the first two rules essentially require a management contract so that the service provider maintains control of the property. The service recipient is allowed to retain an interest in the land underlying the asset via a ground lease without being considered in physical possession of the property. However, they will not be able to mandate how the property is maintained, operated, or improved. There are five rules to consider which determine significant economic interest in a property:
If the property is utilized by a service recipient for most of its useful life
If the service recipient bears the risk of a decline in value of the property
If the service recipient shares the reward for an increase in value of the property
If the service recipient receives a portion of savings in operating costs
If the service recipient bears the risk of damage or loss of the property
To be considered a service contract, the fourth general rule requires the service provider to bear the risk of reduced receipts or increased expenses as the result of non-performance under the contract. An exception to this rule is a provision which allows for an output contract to remain in force during short shut-downs of a facility. To resemble a service contract, the fifth rule states that services must be provided to someone other than the service recipient. For example, a purchaser of power should allow sales to customers and not use all of it for themselves. The last rule states that the total contract price should substantially exceed the value of the property to be classified as a service contract. Thus, if the contract price is derived mostly from recovery of costs of the property or there is a separation between use and service charges of the property, then the contract will resemble a lease.
An important item to note is that not all six requirements need to be satisfied to be considered a service contract. Section 7701(e) does not weight any of the criteria but simply allows for a contract either resembling a lease or a service contract. This would imply that a simple majority of criteria is necessary for classification.
Section 7701(e)(3) provides special rules for determining whether a contract is a service contract. These special rules apply only to the following types of facilities: qualified solid waste disposal, cogeneration, alternative energy, and water treatment works. The following four special rules replace the general rules for the above facility types and indicate when a service contract should actually be classified as a lease:
If the service recipient operates the facility
If the service recipient risks a significant financial loss when there is non-performance under the contract
If the service recipient risks a significant financial gain when operating costs are less that the standards of performance under the contract
If the service recipient has a purchase option or is required to buy all or part of the facility at a fixed price other than the fair market value
There are three main differences between the special and general rules. The first one is that with the special rules, lower operating costs cannot be passed on to the service recipient. Secondly, the risk of temporary shut down of the facility can be shared by the service recipient. Lastly, all costs and benefits due to changes in the law can be passed on to the service recipient.
Service contracts have less tax downside and less financial risk as well as more even returns over time. Also, the contract must be carefully structured to qualify as a service contract. While it is easier to qualify under the special rules, there are many fewer available facilities. The main tax benefit for classification as a service contract is the allowance for depreciation over 125% of the lease term rather than 125% of the combined lease and service contract terms.
RENTAL CONTRACT
A rental agreement is a contract, usually written, between the owner of a property and a renter who desires to have temporary possession of the property. As a minimum, the agreement identifies the parties, the property, the term of the rental, and the amount of rent for the term. The owner of the property may be referred to as the lessor and the renter as the lessee.
COPY CONTROL
Copy Controls
The Copy controls enable a Document in SD to be created by referring to an existing document
Document referred: Source document
Document created: target document
Copy controls enable data to be copied from source to Target document
Copy controls to be maintained for Header, Item, Schedule line
QT---OR
Header                         Header
Item                         Item
Schedule line               schedule line
Copy controls have 3 controls
a)     Copying requirements
b)     Data transfer routines (a program)
c)     Switching requirements
Copying requirements: only if the requirement is met copying takes place
IMGSDsalesMaintain copy controls for Sales documents
Copying control sales document to sales document
Header
Position
Target: OR
Source: QT
Select OR+QT and then select details button
We can see Copy controls
Copying requirement: Same Customer
Only if the requirements met then only Copying possible
Data transfer routines
a)     General header data
b)     Business data
c)     Partners
Switching requirement: Copy item number
Only those items cleared for copying will be copied into target document with item numbers unchanged
Item level Copy Controls
First select combination OR+QT
Click item
Select Item category of source document and select Details button=AGN
Copy controls for item level
Requirement: item rejection reason
Only those items which are not rejected in source document will be copied into target doc
Switching requirements: Copy schedule lines
Activate document flow at item level
This automatically updates item status in the reference document and new document
+Ve/ -ve qty
Quotation 200302        AGN
10          M1          100 Pcs
Copied into order 25 pieces TAN
Completed qty= 25
2nd copy
Copied 50 nos
Completed item = 25+50=75
This means there is + ve effect on Completion qty
-ve effect exists in the case of item level copyng from credit note in the case contracts
Pricing type: Pricing type controls how the pricing to be determined in target documents
Example:
a)     Copy all pricing elements unchanged and redetermine scales
This can be overruled by update Control in the Pricing
Schedule line
Select OR+ QT
Select schedule line
Select schedule line category     BN
Select Details
Copying requirements:
Schedule line qty>0 then only copy
Note1: when we create a new document by copying standard document, copy controls also get copied
Note2. Copy controls can be seen at all different times of documents like sales, delivery and billing in customization
Reward if useful to u
null

Inclusive Free Goods without Item Generation

Can anbody explain 'Inclusive Free Goods without Item Generation' with an example.
Thanks in advance
Sunit

hi,
Prerequisites
In the free goods master record in the Free goods category field, select free goods category 3 (inclusive free goods without item generation).
Features
In free goods master data maintenance, this new free goods type is dealt with in the same way as the inclusive free goods procedure described above.
In order processing, you can not create order sub-items.
For pricing in the main item, you need to create a discount. The standard system provides pricing procedure RVAA01 and condition type NRAB.
Condition type NRAB is set up as follows:
It does not determine a discount from a condition record. It uses condition basis formula 029 in the pricing procedure to determine a discount from the free goods factor.
The condition receives the new pricing requirement 059 in the pricing procedure. This requirement checks whether free goods have already been determined.
The condition type receives condition category f. This condition category ensures that the condition is redetermined every time the quantity is changed, since this can also mean a change to the free goods quantity.
regards
sadhu kishore

Fields in Creation of free goods VBN1

hi everybody,
Can somebody expalin in detail the fields in creation of free goods(T-vbn1) like free goods quantity,additional quantity,documnet quantity and calculation rule....
<b>Please dont copy paste anything form SAP help....I read that one......</b>
I would appreciate if u explain with your sentence..
Will reward point if it helps.
Ghassan

Hi Gafoor,
Material
Material, for which free goods is to be
granted
Minimum quantity
Minimum quantity for which free
goods can be granted
From
Quantity of sales material
FGQ--- Quantity unit of free goods material
Free goods -- Quantity of free goods with reference to the quantity and quantity unit of the sales material.
AQU - Quantity unit of the free goods additional quantity
Rule - Calculation rule
Prorata
whole units
unit related
D -- Delivery controlling - it tells how you can manage the delivery of free goods with respect to the main item ordered.
Additional material - Additional material (only available for entry in exclusive free goods)
Hope it helps. Please reward if helpful.
Thanks & Regards
Sadhu Kishore

COGS update on other GL Account at the time of Free goods or Sample goods

Hello,
In sales process, Usually the at the time of Delivery, material document is created as
DR COGS
CR INVENTORY
But in the case of free goods or bonus goods or samples: the account should not determines COGS instead it should determine another GL Account called as Free good -COGS expense A/c.
How can we solve the issue.
Regards,
SK

Hi Yasar,
You need to create a new routine for calculate type.
Do as below:
1. Go to VOFM>Formulas>calc.rule Rebate InKd to create a new routine for calculate type. for example 601.
2. add the following code in this routine 601 and then save.
USING L_FRM STRUCTURE KONDN_FRM.
DATA: VORKOMMA LIKE KONDN-KNRMM,
NACHKOMMA LIKE KONDN-KNRMM.
L_FRM-NRMENGE = 0.
L_FRM-NRRUND = 0.
L_FRM-NRMENGE = ( L_FRM-MGLME / L_FRM-KNRNM * L_FRM-KNRZM ).
business rounding
VORKOMMA = FLOOR( L_FRM-NRMENGE ).
L_FRM-NRRUND = L_FRM-NRMENGE - VORKOMMA.
L_FRM-NRMENGE = VORKOMMA.
3. Select routine 601 in field "Calc.Rule" when you create free goods condition record.
Hope it helps.

Configuring requirement : ordered item to absorb cost of free goods

Hello Friends,
I need to configure this in SAP SD.
The main item should accumulate the cost of the free goods.
I have set the cumulative indicator and deactivated pring for this item.
Do i still need to configure the stock value for the free goods as cost free item? Or is this step only applicable for
another scenario, like,
If I were to activate Pricing such that free goods is displayed as subitem and VPRS configured as cost and discount set to 100%
1. Set Item category to TANN using FREE usage AND
2. use condition type RL00 with requirement 55.
3. use pricing type B.
regards
Ravi

Read this SAP help at http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm and the topic Free Goods in Sales and Distribution Processing for details.
Also go through each step of the configuration of the path at SPRO->Sales and distribution->basic functions->free goods.
Regards,

Free Goods redetermination

Similar Messages

Maybe you are looking for