Freezes after changing an i5 cpu for i7

Hello,
I've changed my Intel Core i5 680 cpu @ 3,60 GHz which worked pretty well by an Intel Core i7 880 @ 3,06 GHz expecting more performance.
Since I've changed the cpu I'm experiencing some applications freezes for some seconds until they respond again, but I have no error in the terminal output. This affects to other applications too. For example if I'm watching a video while I'm surfing the internet with firefox 27 and it freezes, the video stop playing, and I can't launch any other application, applications menu does not drop... almost all applications freezes for some seconds until it all respond again. When these freezes happens I see the cpu monitor raises up to 50% more or less as a plateau during the freeze.
I've already reinstalled the kernel with 'pacman -S linux' but haven't solved the problem.
The last time I've had to reboot pushing the power button manually because I began to get "bus error" in every application I tried to start from terminal.
I want to know if it is a cpu malfunction because I've just purchased it used.
Is it a cpu malfunction or is it that I have to reinstall Archlinux?

I've come back to the i7 again. I've experienced the same random frozens but now I've been able to do a dmesg after the first one. This is the last part of the dmesg output:
[ 0.541792] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.541802] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.541833] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.541834] vesafb: scrolling: redraw
[ 0.541836] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.541986] vesafb: framebuffer at 0xe5000000, mapped to 0xffffc90005b00000, using 3072k, total 3072k
[ 0.641501] Console: switching to colour frame buffer device 128x48
[ 0.740969] fb0: VESA VGA frame buffer device
[ 0.740977] intel_idle: MWAIT substates: 0x1120
[ 0.740987] intel_idle: v0.4 model 0x1E
[ 0.740988] intel_idle: lapic_timer_reliable_states 0x2
[ 0.741149] GHES: HEST is not enabled!
[ 0.741190] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.761747] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.762021] Linux agpgart interface v0.103
[ 0.762076] rtc_cmos 00:02: RTC can wake from S4
[ 0.762186] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.762211] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.762285] drop_monitor: Initializing network drop monitor service
[ 0.762330] TCP: cubic registered
[ 0.762398] NET: Registered protocol family 10
[ 0.762522] NET: Registered protocol family 17
[ 0.762528] Key type dns_resolver registered
[ 0.762762] registered taskstats version 1
[ 0.763673] Magic number: 2:688:102
[ 0.763769] rtc_cmos 00:02: setting system clock to 2014-02-22 00:07:38 UTC (1393027658)
[ 0.763787] PM: Hibernation image not present or could not be loaded.
[ 0.764686] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 0.764687] Write protecting the kernel read-only data: 8192k
[ 0.766485] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
[ 0.767645] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
[ 0.775079] systemd-udevd[82]: starting version 208
[ 0.776016] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.778838] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.778866] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.797207] ACPI: bus type USB registered
[ 0.797230] usbcore: registered new interface driver usbfs
[ 0.797237] usbcore: registered new interface driver hub
[ 0.797290] usbcore: registered new device driver usb
[ 0.798123] SCSI subsystem initialized
[ 0.798529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.799364] libata version 3.00 loaded.
[ 0.799537] ehci-pci: EHCI PCI platform driver
[ 0.799663] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.799669] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.799681] ehci-pci 0000:00:1a.0: debug port 2
[ 0.803618] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.803637] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3ffe000
[ 0.804588] ahci 0000:09:00.0: version 3.0
[ 0.804655] ahci 0000:09:00.0: irq 50 for MSI/MSI-X
[ 0.804718] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.804721] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.804732] ahci 0000:09:00.0: port 0 can do FBS, forcing FBSCP
[ 0.804775] ahci 0000:09:00.0: port 1 can do FBS, forcing FBSCP
[ 0.805146] scsi0 : ahci
[ 0.805280] scsi1 : ahci
[ 0.805335] ata1: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff900 irq 50
[ 0.805337] ata2: SATA max UDMA/133 abar m2048@0xf7eff800 port 0xf7eff980 irq 50
[ 0.813358] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.813568] hub 1-0:1.0: USB hub found
[ 0.813573] hub 1-0:1.0: 2 ports detected
[ 0.813677] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 0.813682] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 2
[ 0.813851] xhci_hcd 0000:08:00.0: irq 51 for MSI/MSI-X
[ 0.813856] xhci_hcd 0000:08:00.0: irq 52 for MSI/MSI-X
[ 0.813861] xhci_hcd 0000:08:00.0: irq 53 for MSI/MSI-X
[ 0.813865] xhci_hcd 0000:08:00.0: irq 54 for MSI/MSI-X
[ 0.813870] xhci_hcd 0000:08:00.0: irq 55 for MSI/MSI-X
[ 0.813874] xhci_hcd 0000:08:00.0: irq 56 for MSI/MSI-X
[ 0.813879] xhci_hcd 0000:08:00.0: irq 57 for MSI/MSI-X
[ 0.813883] xhci_hcd 0000:08:00.0: irq 58 for MSI/MSI-X
[ 0.814222] hub 2-0:1.0: USB hub found
[ 0.814230] hub 2-0:1.0: 2 ports detected
[ 0.814335] xhci_hcd 0000:08:00.0: xHCI Host Controller
[ 0.814338] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
[ 0.814362] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.814377] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.814395] ehci-pci 0000:00:1d.0: debug port 2
[ 0.818336] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.818353] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3ffd000
[ 0.818494] hub 3-0:1.0: USB hub found
[ 0.818506] hub 3-0:1.0: 2 ports detected
[ 0.826687] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.826825] hub 4-0:1.0: USB hub found
[ 0.826831] hub 4-0:1.0: 2 ports detected
[ 0.826917] ata_piix 0000:00:1f.2: version 2.13
[ 0.827013] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.828206] scsi2 : ata_piix
[ 0.828283] scsi3 : ata_piix
[ 0.828323] ata3: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 21
[ 0.828328] ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 21
[ 0.828398] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.829287] scsi4 : ata_piix
[ 0.829401] scsi5 : ata_piix
[ 0.829442] ata5: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[ 0.829446] ata6: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[ 0.870370] firewire_ohci 0000:0c:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.120293] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.123613] ata2: SATA link down (SStatus 0 SControl 370)
[ 1.157846] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.168602] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.244278] hub 1-1:1.0: USB hub found
[ 1.244361] hub 1-1:1.0: 6 ports detected
[ 1.290308] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
[ 1.292100] ata1.00: ATA-8: ST32000641AS, CC13, max UDMA/133
[ 1.292106] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.294085] ata1.00: configured for UDMA/133
[ 1.294487] scsi 0:0:0:0: Direct-Access ATA ST32000641AS CC13 PQ: 0 ANSI: 5
[ 1.295533] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.295920] sd 0:0:0:0: [sda] Write Protect is off
[ 1.295927] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.296134] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.350262] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.370503] firewire_core 0000:0c:03.0: created device fw0: GUID 001e8c0000cf230a, S400
[ 1.382765] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 1.384890] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.477644] hub 4-1:1.0: USB hub found
[ 1.477706] hub 4-1:1.0: 8 ports detected
[ 1.478163] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 1.478175] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.489302] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.489314] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.490789] scsi6 : pata_marvell
[ 1.490864] scsi7 : pata_marvell
[ 1.490898] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 18
[ 1.490900] ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 18
[ 1.530283] tsc: Refined TSC clocksource calibration: 3076.211 MHz
[ 1.743898] usb 4-1.5: new low-speed USB device number 3 using ehci-pci
[ 1.839559] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.842220] usbcore: registered new interface driver usbhid
[ 1.842221] usbhid: USB HID core driver
[ 1.842681] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input2
[ 1.842873] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 1.904037] usb 4-1.6: new low-speed USB device number 4 using ehci-pci
[ 1.995810] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input3
[ 1.995929] hid-generic 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 2.001658] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/input/input4
[ 2.002017] hid-generic 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[ 2.224921] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.531128] Switched to clocksource tsc
[ 2.619260] random: nonblocking pool is initialized
[ 2.812798] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 2.823170] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.837440] systemd[1]: Set hostname to <ArchLinux>.
[ 3.575780] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.575819] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.575829] systemd[1]: Starting Remote File Systems.
[ 3.576854] systemd[1]: Reached target Remote File Systems.
[ 3.576863] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
[ 3.578178] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.579468] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.579475] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.580605] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.580612] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.581827] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.581834] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.582895] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.582906] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.582933] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.582954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.584746] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.584755] systemd[1]: Starting Journal Socket.
[ 3.585688] systemd[1]: Listening on Journal Socket.
[ 3.585702] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.587447] systemd[1]: Starting Apply Kernel Variables...
[ 3.590085] systemd[1]: Started Load Kernel Modules.
[ 3.590103] systemd[1]: Mounting Configuration File System...
[ 3.591247] systemd[1]: Mounting Huge Pages File System...
[ 3.592327] systemd[1]: Starting Setup Virtual Console...
[ 3.608365] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.611001] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.611054] systemd[1]: Starting Journal Service...
[ 3.612925] systemd[1]: Started Journal Service.
[ 3.932314] systemd-journald[155]: Vacuuming done, freed 0 bytes
[ 4.064664] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[ 4.688884] systemd-udevd[189]: starting version 208
[ 5.199113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.199117] ACPI: Power Button [PWRB]
[ 5.199151] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.199153] ACPI: Power Button [PWRF]
[ 5.218714] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 5.218718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.218721] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS1 1 (20131115/utaddress-251)
[ 5.218723] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 2 (20131115/utaddress-251)
[ 5.218725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.218726] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS1 1 (20131115/utaddress-251)
[ 5.218727] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20131115/utaddress-251)
[ 5.218729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.218741] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.250594] wmi: Mapper loaded
[ 5.252023] ATK0110 ATK0110:00: EC enabled
[ 5.330570] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 5.376652] platform microcode: Direct firmware load failed with error -2
[ 5.376654] platform microcode: Falling back to user helper
[ 5.384674] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 5.387099] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 5.387109] platform microcode: Direct firmware load failed with error -2
[ 5.387110] platform microcode: Falling back to user helper
[ 5.388452] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388460] platform microcode: Direct firmware load failed with error -2
[ 5.388462] platform microcode: Falling back to user helper
[ 5.388853] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388863] platform microcode: Direct firmware load failed with error -2
[ 5.388865] platform microcode: Falling back to user helper
[ 5.389097] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389106] platform microcode: Direct firmware load failed with error -2
[ 5.389107] platform microcode: Falling back to user helper
[ 5.389433] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389443] platform microcode: Direct firmware load failed with error -2
[ 5.389445] platform microcode: Falling back to user helper
[ 5.389824] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389833] platform microcode: Direct firmware load failed with error -2
[ 5.389835] platform microcode: Falling back to user helper
[ 5.390239] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4
[ 5.390244] EDAC MC: Ver: 3.0.0
[ 5.390247] platform microcode: Direct firmware load failed with error -2
[ 5.390248] platform microcode: Falling back to user helper
[ 5.390727] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.393902] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 5.393942] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 5.393947] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 5.426858] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 5.443613] iTCO_vendor_support: vendor-support=0
[ 5.447340] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 5.447359] iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
[ 5.447435] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.469753] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.498371] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 5.537719] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 5.537856] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 5.537960] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 5.538051] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.538118] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.538220] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.538259] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.538300] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.538552] hda_intel: Disabling MSI
[ 5.538559] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.773056] mousedev: PS/2 mouse device common for all mice
[ 6.215598] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input20
[ 6.215877] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
[ 6.216144] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
[ 6.216410] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input17
[ 6.217997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.218340] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[ 6.221830] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.293514] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.293521] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.293694] r8169 0000:02:00.0: irq 61 for MSI/MSI-X
[ 6.293809] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc900087fe000, 48:5b:39:10:75:8c, XID 083000c0 IRQ 61
[ 6.293810] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.342136] systemd-udevd[193]: renamed network interface eth0 to enp2s0
[ 6.373838] [drm] Initialized drm 1.1.0 20060810
[ 6.671871] nvidia: module license 'NVIDIA' taints kernel.
[ 6.671874] Disabling lock debugging due to kernel taint
[ 6.678484] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.678686] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 6.678693] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
[ 7.374846] fuse init (API version 7.22)
[ 7.391646] Adding 10484732k swap on /dev/sda3. Priority:-1 extents:1 across:10484732k FS
[ 7.899600] systemd-journald[155]: Received request to flush runtime journal from PID 1
[ 9.904737] r8169 0000:02:00.0 enp2s0: link down
[ 9.904751] r8169 0000:02:00.0 enp2s0: link down
[ 9.904759] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.796534] r8169 0000:02:00.0 enp2s0: link up
[ 11.796546] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 14.442672] nvidia 0000:01:00.0: irq 62 for MSI/MSI-X
[ 15.067397] NVRM: Your system is not currently configured to drive a VGA console
[ 15.067400] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 15.067402] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 15.067403] NVRM: drivers including, but not limited to, vesafb, may result in
[ 15.067404] NVRM: corruption and stability problems, and is not supported.
[ 26.171382] type=1006 audit(1393024083.894:2): pid=386 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 26.265105] type=1006 audit(1393024083.991:3): pid=525 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 35.539660] hda-codec: out of range cmd 3:5:707:ffffffff
[ 351.605213] nvidia 0000:01:00.0: irq 62 for MSI/MSI-X
[ 357.785261] type=1006 audit(1393024415.388:4): pid=386 uid=0 old auid=1000 new auid=1000 old ses=1 new ses=3 res=1
[ 365.084560] hda-codec: out of range cmd 0:5:707:ffffffbf
[ 424.713298] ata1.00: exception Emask 0x0 SAct 0x7ff0003f SErr 0x0 action 0x6 frozen
[ 424.713307] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713315] ata1.00: cmd 60/b8:00:40:de:65/00:00:24:00:00/40 tag 0 ncq 94208 in
res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 424.713320] ata1.00: status: { DRDY }
[ 424.713323] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713331] ata1.00: cmd 60/08:08:f8:eb:bd/00:00:3b:00:00/40 tag 1 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713335] ata1.00: status: { DRDY }
[ 424.713338] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713346] ata1.00: cmd 60/08:10:88:eb:bd/00:00:3b:00:00/40 tag 2 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713350] ata1.00: status: { DRDY }
[ 424.713353] ata1.00: failed command: WRITE FPDMA QUEUED
[ 424.713360] ata1.00: cmd 61/08:18:90:bf:34/00:00:49:00:00/40 tag 3 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713364] ata1.00: status: { DRDY }
[ 424.713367] ata1.00: failed command: WRITE FPDMA QUEUED
[ 424.713374] ata1.00: cmd 61/08:20:10:9a:73/00:00:25:00:00/40 tag 4 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713378] ata1.00: status: { DRDY }
[ 424.713382] ata1.00: failed command: WRITE FPDMA QUEUED
[ 424.713389] ata1.00: cmd 61/60:28:a0:8a:42/01:00:3a:00:00/40 tag 5 ncq 180224 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713393] ata1.00: status: { DRDY }
[ 424.713396] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713404] ata1.00: cmd 60/08:a0:a0:eb:bd/00:00:3b:00:00/40 tag 20 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713408] ata1.00: status: { DRDY }
[ 424.713411] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713418] ata1.00: cmd 60/08:a8:a8:eb:bd/00:00:3b:00:00/40 tag 21 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713422] ata1.00: status: { DRDY }
[ 424.713425] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713435] ata1.00: cmd 60/08:b0:b0:eb:bd/00:00:3b:00:00/40 tag 22 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713436] ata1.00: status: { DRDY }
[ 424.713437] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713439] ata1.00: cmd 60/08:b8:b8:eb:bd/00:00:3b:00:00/40 tag 23 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713441] ata1.00: status: { DRDY }
[ 424.713442] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713444] ata1.00: cmd 60/08:c0:c0:eb:bd/00:00:3b:00:00/40 tag 24 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713445] ata1.00: status: { DRDY }
[ 424.713446] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713449] ata1.00: cmd 60/08:c8:c8:eb:bd/00:00:3b:00:00/40 tag 25 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713450] ata1.00: status: { DRDY }
[ 424.713451] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713453] ata1.00: cmd 60/08:d0:d0:eb:bd/00:00:3b:00:00/40 tag 26 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713454] ata1.00: status: { DRDY }
[ 424.713455] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713458] ata1.00: cmd 60/08:d8:d8:eb:bd/00:00:3b:00:00/40 tag 27 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713459] ata1.00: status: { DRDY }
[ 424.713460] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713462] ata1.00: cmd 60/08:e0:e0:eb:bd/00:00:3b:00:00/40 tag 28 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713463] ata1.00: status: { DRDY }
[ 424.713464] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713467] ata1.00: cmd 60/08:e8:e8:eb:bd/00:00:3b:00:00/40 tag 29 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713468] ata1.00: status: { DRDY }
[ 424.713469] ata1.00: failed command: READ FPDMA QUEUED
[ 424.713471] ata1.00: cmd 60/08:f0:f0:eb:bd/00:00:3b:00:00/40 tag 30 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 424.713473] ata1.00: status: { DRDY }
[ 424.713475] ata1: hard resetting link
[ 425.200157] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
[ 425.203897] ata1.00: configured for UDMA/133
[ 425.203906] ata1.00: device reported invalid CHS sector 0
[ 425.203910] ata1.00: device reported invalid CHS sector 0
[ 425.203913] ata1.00: device reported invalid CHS sector 0
[ 425.203916] ata1.00: device reported invalid CHS sector 0
[ 425.203919] ata1.00: device reported invalid CHS sector 0
[ 425.203923] ata1.00: device reported invalid CHS sector 0
[ 425.203926] ata1.00: device reported invalid CHS sector 0
[ 425.203929] ata1.00: device reported invalid CHS sector 0
[ 425.203932] ata1.00: device reported invalid CHS sector 0
[ 425.203934] ata1.00: device reported invalid CHS sector 0
[ 425.203937] ata1.00: device reported invalid CHS sector 0
[ 425.203940] ata1.00: device reported invalid CHS sector 0
[ 425.203943] ata1.00: device reported invalid CHS sector 0
[ 425.203945] ata1.00: device reported invalid CHS sector 0
[ 425.203948] ata1.00: device reported invalid CHS sector 0
[ 425.203951] ata1.00: device reported invalid CHS sector 0
[ 425.203953] ata1.00: device reported invalid CHS sector 0
[ 425.203977] sd 0:0:0:0: [sda]
[ 425.203980] Result: hostbyte=0x00 driverbyte=0x08
[ 425.203983] sd 0:0:0:0: [sda]
[ 425.203986] Sense Key : 0xb [current] [descriptor]
[ 425.203990] Descriptor sense data with sense descriptors (in hex):
[ 425.203993] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204004] 00 00 00 00
[ 425.204010] sd 0:0:0:0: [sda]
[ 425.204012] ASC=0x0 ASCQ=0x0
[ 425.204015] sd 0:0:0:0: [sda] CDB:
[ 425.204017] cdb[0]=0x28: 28 00 3b bd eb f8 00 00 08 00
[ 425.204028] end_request: I/O error, dev sda, sector 1002302456
[ 425.204044] sd 0:0:0:0: [sda]
[ 425.204045] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204046] sd 0:0:0:0: [sda]
[ 425.204046] Sense Key : 0xb [current] [descriptor]
[ 425.204048] Descriptor sense data with sense descriptors (in hex):
[ 425.204048] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204052] 00 00 00 00
[ 425.204054] sd 0:0:0:0: [sda]
[ 425.204054] ASC=0x0 ASCQ=0x0
[ 425.204055] sd 0:0:0:0: [sda] CDB:
[ 425.204056] cdb[0]=0x28: 28 00 3b bd eb a0 00 00 08 00
[ 425.204059] end_request: I/O error, dev sda, sector 1002302368
[ 425.204062] sd 0:0:0:0: [sda]
[ 425.204063] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204064] sd 0:0:0:0: [sda]
[ 425.204064] Sense Key : 0xb [current] [descriptor]
[ 425.204066] Descriptor sense data with sense descriptors (in hex):
[ 425.204066] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204070] 00 00 00 00
[ 425.204072] sd 0:0:0:0: [sda]
[ 425.204072] ASC=0x0 ASCQ=0x0
[ 425.204073] sd 0:0:0:0: [sda] CDB:
[ 425.204074] cdb[0]=0x28: 28 00 3b bd eb a8 00 00 08 00
[ 425.204077] end_request: I/O error, dev sda, sector 1002302376
[ 425.204079] sd 0:0:0:0: [sda]
[ 425.204080] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204081] sd 0:0:0:0: [sda]
[ 425.204082] Sense Key : 0xb [current] [descriptor]
[ 425.204083] Descriptor sense data with sense descriptors (in hex):
[ 425.204083] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204087] 00 00 00 00
[ 425.204089] sd 0:0:0:0: [sda]
[ 425.204089] ASC=0x0 ASCQ=0x0
[ 425.204090] sd 0:0:0:0: [sda] CDB:
[ 425.204091] cdb[0]=0x28: 28 00 3b bd eb b0 00 00 08 00
[ 425.204094] end_request: I/O error, dev sda, sector 1002302384
[ 425.204096] sd 0:0:0:0: [sda]
[ 425.204097] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204098] sd 0:0:0:0: [sda]
[ 425.204099] Sense Key : 0xb [current] [descriptor]
[ 425.204100] Descriptor sense data with sense descriptors (in hex):
[ 425.204100] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204104] 00 00 00 00
[ 425.204106] sd 0:0:0:0: [sda]
[ 425.204106] ASC=0x0 ASCQ=0x0
[ 425.204107] sd 0:0:0:0: [sda] CDB:
[ 425.204108] cdb[0]=0x28: 28 00 3b bd eb b8 00 00 08 00
[ 425.204111] end_request: I/O error, dev sda, sector 1002302392
[ 425.204113] sd 0:0:0:0: [sda]
[ 425.204114] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204115] sd 0:0:0:0: [sda]
[ 425.204116] Sense Key : 0xb [current] [descriptor]
[ 425.204117] Descriptor sense data with sense descriptors (in hex):
[ 425.204117] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204121] 00 00 00 00
[ 425.204123] sd 0:0:0:0: [sda]
[ 425.204123] ASC=0x0 ASCQ=0x0
[ 425.204124] sd 0:0:0:0: [sda] CDB:
[ 425.204125] cdb[0]=0x28: 28 00 3b bd eb c0 00 00 08 00
[ 425.204128] end_request: I/O error, dev sda, sector 1002302400
[ 425.204131] sd 0:0:0:0: [sda]
[ 425.204131] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204132] sd 0:0:0:0: [sda]
[ 425.204133] Sense Key : 0xb [current] [descriptor]
[ 425.204134] Descriptor sense data with sense descriptors (in hex):
[ 425.204135] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204138] 00 00 00 00
[ 425.204140] sd 0:0:0:0: [sda]
[ 425.204141] ASC=0x0 ASCQ=0x0
[ 425.204142] sd 0:0:0:0: [sda] CDB:
[ 425.204142] cdb[0]=0x28: 28 00 3b bd eb c8 00 00 08 00
[ 425.204145] end_request: I/O error, dev sda, sector 1002302408
[ 425.204148] sd 0:0:0:0: [sda]
[ 425.204148] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204149] sd 0:0:0:0: [sda]
[ 425.204150] Sense Key : 0xb [current] [descriptor]
[ 425.204151] Descriptor sense data with sense descriptors (in hex):
[ 425.204152] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204155] 00 00 00 00
[ 425.204157] sd 0:0:0:0: [sda]
[ 425.204158] ASC=0x0 ASCQ=0x0
[ 425.204159] sd 0:0:0:0: [sda] CDB:
[ 425.204159] cdb[0]=0x28: 28 00 3b bd eb d0 00 00 08 00
[ 425.204162] end_request: I/O error, dev sda, sector 1002302416
[ 425.204165] sd 0:0:0:0: [sda]
[ 425.204165] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204166] sd 0:0:0:0: [sda]
[ 425.204167] Sense Key : 0xb [current] [descriptor]
[ 425.204168] Descriptor sense data with sense descriptors (in hex):
[ 425.204169] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204172] 00 00 00 00
[ 425.204174] sd 0:0:0:0: [sda]
[ 425.204175] ASC=0x0 ASCQ=0x0
[ 425.204176] sd 0:0:0:0: [sda] CDB:
[ 425.204176] cdb[0]=0x28: 28 00 3b bd eb d8 00 00 08 00
[ 425.204179] end_request: I/O error, dev sda, sector 1002302424
[ 425.204182] sd 0:0:0:0: [sda]
[ 425.204182] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204183] sd 0:0:0:0: [sda]
[ 425.204184] Sense Key : 0xb [current] [descriptor]
[ 425.204185] Descriptor sense data with sense descriptors (in hex):
[ 425.204185] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204189] 00 00 00 00
[ 425.204191] sd 0:0:0:0: [sda]
[ 425.204192] ASC=0x0 ASCQ=0x0
[ 425.204193] sd 0:0:0:0: [sda] CDB:
[ 425.204193] cdb[0]=0x28: 28 00 3b bd eb e0 00 00 08 00
[ 425.204196] end_request: I/O error, dev sda, sector 1002302432
[ 425.204198] sd 0:0:0:0: [sda]
[ 425.204199] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204200] sd 0:0:0:0: [sda]
[ 425.204201] Sense Key : 0xb [current] [descriptor]
[ 425.204202] Descriptor sense data with sense descriptors (in hex):
[ 425.204202] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204206] 00 00 00 00
[ 425.204208] sd 0:0:0:0: [sda]
[ 425.204208] ASC=0x0 ASCQ=0x0
[ 425.204209] sd 0:0:0:0: [sda] CDB:
[ 425.204210] cdb[0]=0x28: 28 00 3b bd eb e8 00 00 08 00
[ 425.204215] sd 0:0:0:0: [sda]
[ 425.204215] Result: hostbyte=0x00 driverbyte=0x08
[ 425.204216] sd 0:0:0:0: [sda]
[ 425.204217] Sense Key : 0xb [current] [descriptor]
[ 425.204218] Descriptor sense data with sense descriptors (in hex):
[ 425.204219] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 425.204222] 00 00 00 00
[ 425.204224] sd 0:0:0:0: [sda]
[ 425.204225] ASC=0x0 ASCQ=0x0
[ 425.204226] sd 0:0:0:0: [sda] CDB:
[ 425.204226] cdb[0]=0x28: 28 00 3b bd eb f0 00 00 08 00
[ 425.204231] ata1: EH complete
It's strange for me to have HDD errors just with the i7 processor, with the i5 I have no problems.
I don't know if this is the part in which the cpu makes the HDD fail (if it is so):
[ 5.330570] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 5.376652] platform microcode: Direct firmware load failed with error -2
[ 5.376654] platform microcode: Falling back to user helper
[ 5.384674] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 5.387099] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 5.387109] platform microcode: Direct firmware load failed with error -2
[ 5.387110] platform microcode: Falling back to user helper
[ 5.388452] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388460] platform microcode: Direct firmware load failed with error -2
[ 5.388462] platform microcode: Falling back to user helper
[ 5.388853] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 5.388863] platform microcode: Direct firmware load failed with error -2
[ 5.388865] platform microcode: Falling back to user helper
[ 5.389097] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389106] platform microcode: Direct firmware load failed with error -2
[ 5.389107] platform microcode: Falling back to user helper
[ 5.389433] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389443] platform microcode: Direct firmware load failed with error -2
[ 5.389445] platform microcode: Falling back to user helper
[ 5.389824] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4
[ 5.389833] platform microcode: Direct firmware load failed with error -2
[ 5.389835] platform microcode: Falling back to user helper
[ 5.390239] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4
[ 5.390244] EDAC MC: Ver: 3.0.0
[ 5.390247] platform microcode: Direct firmware load failed with error -2
[ 5.390248] platform microcode: Falling back to user helper
[ 5.390727] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.393902] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 5.393942] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 5.393947] EDAC i7core: Driver loaded, 1 memory controller(s) found.
I'm going crazy, I've google a lot of things but any of them have fit good enough with my problem.
Last edited by josealb77 (2014-02-22 22:58:03)

Similar Messages

  • Macbook freezes after change of wifi location

    Finally I can reproduce the freezing of my macbook air. If I change from wifi location for example i go to work from home the following happens:
    the MBA will not fall a sleep resulting in a very hot MBA in my bag.
    the MBA will fall a sleep but it is not possible to wake it up again
    the MBA will fall a sleep and is able to wake up again after opening the lid but now it will freeze the entire mac within 5-10 minutes.
    I have to push the power button for a long time in either cases.
    I just did a complete restore so i have no extra software installed.
    Is repair the only option here?

    Can you reproduce the problem after erasing the startup volume and installing OS X, without restoring anything from a backup? If so, the machine needs to be serviced.

  • Acrobat 9 Pro: fields deleted after changing compatibility of Acrobat for 4.0

    I have pdf's with many of fields in which I need to change compatibility on Adobe 4.0.
    When I try to do this (Save as optimized pdf with the option selected "make compatible with" on "Adobe 4.0 or later") program delete all of fields.
    This problem appears after changing OS from Win XP on Win 7 Enterprise 64-bit.
    Earlier I didn't have that problem.
    I will be grateful for any help, reinstalling Adobe has not helped and I did not find any clues on the internet.

    Unfortunately I can not share this documents.
    However, I noticed that only some of them have above problem. Now I have only to find its cause - changing the OS wasn't the cause of this problem.
    Thank you for your interest.

  • Computer freezes after changing CPU Need Help!

    Just replaced the processor in my P35 Platinum from Core 2 Duo E4500 to Pentium Dual-Core E5800 as it says in MSI CPU Support that E5800 is supported. But to my surprise, the system would have blue screen whenever I turn EIST off. Why is this so? Need a solution quick. Would really appreciate any help.

    function() {
        stopDrag();
        if (tabbingON || !draggingON) {
            pickupPiece(this._name);
        // if puzzle piece is in right spot, then place
        else if (eval(_root[this._name]._droptarget) == _root["hitarea" + selectedPiece]) {
            placePiece(this._name);
            counter++;
            reply_txt.text = "Good Job!";
            playSound("5.3right");
        // if puzzle piece is not in right spot, then return it
        } else {
            returnPiece(this._name);
            reply_txt.text = "Try again!";
            playSound("5.3beep-10");
           if(counter == 10){
            reply_txt.text = "Finish!";
            playSound("5.3greatjob1");
    Okey that is the last object to be place.. when the last object is placed there, text will changed and a different sound effect will be heard.
    Once that is done, i press my back button to go to the game selection scene but the last object stays.
    i tried reset button using
    function reset()
    dd1._x = 910
    dd1._y = 277
    dd2._x = 913
    dd2._y = 384
    dd3._x = 914
    dd3._y = 486
    dd4._x = 918
    dd4._y = 591
    and used in on the codings for my Back Button before it went the game menu.. hmm here
    backbtn.onRelease = function(){
        reset();
        gotoAndPlay("5.0Games", 1);
    but it still wont work and the last object stays.
    Hmm i have 4 games with the same codes, the names of object were the same at the beginning using pp1 til pp5 or pp10 but i changed everyone of them to pp dd qq gg so having directory problem isn't the case. I am still finding the solution now trying whatever i can think of, i need help on this..

  • T43p - Mouse pointer freezes after changing the battery to a new one

    Hello,
    I have bought a new battery for my IBM Thinkpad T43p. In the description of the new battery I have seen that this battery is compatible with T43 series. Battery details are: DC 10.8V 5200mAh/56Wh. Replace: 08K8214.
    My problem is:
    I have ordered a new battery for my Thinkpad T43p but when I turned off  the notebook and replace the old battery with the new one the notebook became strange. I use Windows XP Prof on this computer and when the login screen appeared and during I was typing my user name and password the mouse pointer was freezed and I had to turn off the computer. It was happened within approx 1 minute after the Login screen appeared. The symptom was the same with or without plugged in AC charger. I have tried several times and the same behavior was happened. When I changed back the old battery the computer became normal again without any freezing. The fan was working properly in both cases. The symptom is the same if I change the battery during AC charging and using Windows. 
    I don't have an idea about the reason of it. Can you help me with ideas?
    Thanks in advance,
    Slider

    Pull the battery out and run the machine on AC only. Does it freeze now?
    If it doesn't, the "new" battery needs to be replaced.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Cannot compile project after change to "any cpu" randomly

    Hi,
    in my VS 2013 i had changed the solution from x86 to "any cpu" in the debug-settings, the build-settings etc.
    Now sometimes i try to build it it gives the error "Generate ressource cannot be executed because
    it cannot connect to "CLR2" and Architecture "x86" - please make sure(1) runtime and architecture is avilable  and(2) the file
     "C:\Program Files (x86)\MSBuild\12.0\bin\MSBuildTaskHost.exe" exists
    I do not know why that is, it should compile in x64 since my os is 64 bit. The workaround is to delete the exe in my  debug-folder and then let the vs build it again.  
    Sometimes it can work for days after that workaround to build newer versions, then magically it breaks again.
    Looking at the .vbproj-file from another project that was "any cpu" from the start i learned that some  x86-stuff is still in my config of the project that has the issue.
    My question is now if you recommend to "just change it" or if just editing the file to look like that other project will not do it all.
    My vbproj-file from my project looks like this
    Microsoft Visual Studio Solution File, Format Version 12.00
    # Visual Studio Express 2013 for Windows Desktop
    VisualStudioVersion = 12.0.31101.0
    MinimumVisualStudioVersion = 10.0.40219.1
    Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "SAP-Toolbox", "SAP-Toolbox\SAP-Toolbox.vbproj", "{165D1482-8BEB-4247-98EA-0A4040331290}"
    EndProject
    Global
    GlobalSection(SolutionConfigurationPlatforms) = preSolution
    Debug|Any CPU = Debug|Any CPU
    Debug|x86 = Debug|x86
    Release|Any CPU = Release|Any CPU
    Release|x86 = Release|x86
    EndGlobalSection
    GlobalSection(ProjectConfigurationPlatforms) = postSolution
    {Guid}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Debug|Any CPU.Build.0 = Debug|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Debug|x86.ActiveCfg = Debug|x86
    {165D1482-8BEB-4247-98EA-0A4040331290}.Debug|x86.Build.0 = Debug|x86
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|Any CPU.ActiveCfg = Release|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|Any CPU.Build.0 = Release|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|x86.ActiveCfg = Release|x86
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|x86.Build.0 = Release|x86
    EndGlobalSection
    GlobalSection(SolutionProperties) = preSolution
    HideSolutionNode = FALSE
    EndGlobalSection
    EndGlobal
    cheers

    Hi mrsnipes,
    According to your description, I suggest you could try to close the VS and then re-open the VS2013, then clean build solution-> re-build your solution and then check if the project/solution can be built successfully.
    When I tried to change the solution platform to Any CPU, I found that it work fine. So to check if the issue occurs the specified project/solution or VS IDE, please try to create a simple new VB project in VS 2013 Express for Windows Desktop and
    then right-click your solution->Properties->Configuration properties->Configuration Manager->Change the Active solution platform to the Any CPU check this issue again.
    (1) If you still get same error, maybe you will need to repair or re-install the VS 2013 Express for Windows Desktop check this issue again.
    (2) If you did not get same error in a new project, I doubt that this issue maybe more related to your specified project, so please try to create a blank solution and then add the project into the blank solution.
    As you said the error message, I suggest you also refer the following article check if it can help you solve this issue.
    https://cyanbyfuchsia.wordpress.com/2014/06/11/could-not-run-the-generateresource-task-because-msbuild-could-not-create-or-connect-to-a-task-host-with-runtime-clr2-and-architecture-x86/
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • IMac G3 freezing after changing startup disk?

    Hello.
    I bought a iMac G3 I few months ago just for a hobby and have been playing around on it.
    This morning I noticed two other previous system folders in the system folder.
    I then opened "startup disk" (I think that is the name) and chose to restart with "Previous system folder".
    When it re-booted it opened up differently, had a new background and made sound effects when clicking and scrolling.
    I decided to change the startup disc to "Previous system folder1" (which is the other previous system folder)
    This time when restarting it booted normally until the desktop icons loaded. The mouse and keyboard froze and then a message popped up saying "To use your internal modem you need to select the country from where you will be using your computer". I try to use the mouse and keyboard to select, "Australia" and then "OK" but as previously started the mouse and keyboard are frozen.
    When booting up I can use the mouse and keyboard on the loading screen until it freezes when the desktop appears.
    (The computer was working amazingly before I stupidly changed the system folder)
    Why is this happening. How do I return to a previous system folder when it keeps freezing.
    Here is a youtube video showing you what happens:
    https://www.youtube.com/watch?v=uYURgG2W5x4
    Please note, I do have all the software CD that came with computer, however for some reason discs won't work on the computer they are unrecognizable.
    All keyboard commands do nothing for example holding down shift into safe mode still freezes.
    Thanks in advance!
    Stewart

    I'm not sure what OS you are running here.
    There is a way to set what os  boots from the firmware.  Not sure how.   Look tomorrow.  let me know via another post.
    For classic, you could try hold the
    space bar
    then booting. or is it the shift key?
    If this is a slot loader, try:
    The startup manager will list all of your bootable partitions then give you a choice of which to boot.  Hold down the option key then power on. Continue holding down the option key until you see the startup manager. This brings up the startup manager. Click on your hd or disc. Click on right arrow key.
    Restore Tiger 10.4 & Leopard 10.5  DVDs are available from Apple by calling  1(800) 275-2273. Have your serial number ready. Have your credit card ready too.  There may be a small fee.
    https://discussions.apple.com/thread/4720126?tstart=0  -- January 20,2013
    https://discussions.apple.com/message/24588313#24588313 -- January 22,2014
    gical Macintosh Key Sequences
    http://davespicks.com/writing/programming/mackeys.html
    http://davespicks.com/writing/programming/mackeys.pdf
    Mac OS X keyboard shortcuts
    http://support.apple.com/kb/HT1343
    Startup keys
    http://macs.about.com/od/macoperatingsystems/qt/osxstartupkeys.htm
    I have a list of magical boot key sequences:
        Key Combinations-- Effect
        * mouse down -- Eject removable media ( I think Boot ROMs prior to 2.4f1 excluded the CD drive )
        * opt -- Bring up OF system picker on New World machines. 
                 iMac g3 400 or newer machine
        * cmd-opt -- Hold down until 2nd chime, will boot into Mac OS 9 ?
        * cmd-x (or just x?) -- Will boot into Mac OS X if 9 and X are on the same partition and that's the partition you're booting from.
        * cmd-opt-shift-delete -- Bypass startup drive and boot from external (or CD). This actually forces the system to NOT load the driver for the default volume, which has the side effect mentioned above. For SCSI devices it searches from highest ID to lowest for a partition with a bootable system. Not sure about IDE drives.
        * cmd-opt-shift-delete-# -- Boot from a specific SCSI ID # (# = SCSI ID number)
        * cmd-opt-p-r -- Zap PRAM. Hold down until second chime.
        * cmd-opt-n-v -- Clear NV RAM. Similar to reset-all in Open Firmware.
        * cmd-opt-o-f -- Boot into open firmware
        * cmd-opt-t-v -- Force Quadra AV machines to use TV as a monitor
        * cmd-opt-x-o -- Boot from ROM (Mac Classic only)
        * cmd-opt-a-v -- Force an AV monitor to be recognized as one
        * c -- Boot from CD. If set to boot to X and no CD is present, may boot to 9.
        * d -- Force the internal hard disk to be the startup device
        * n -- Hold down until Mac logo, will attempt to boot from network server (using BOOTP or TFTP)
        * r -- Force PowerBooks to reset the screen
        * t -- Put FireWire machine into FireWire Target Disk mode
        * z -- Attempt to boot using the devalias zip from first bootable partition found
        * shift -- (Classic only) Disable Extensions
        * shift -- (OS X, 10.1.3 and later) Disables login items. Also disables non-essential kernel extensions (safe boot mode)
        * cmd -- (Classic only) Boot with Virtual Memory off
        * space -- (Classic only) Trigger extension manager at boot-up
        * cmd-v -- (OS X only) show console messages during boot
        * cmd-s -- (OS X only) boot into single user mode
    Did not work simply 'z'?
    You could buy an external DVD drive. It needs to be firewire and bootable by Mac OS. If you have another PPC with firewire, you could try target Disk mode and installed tiger that way.
    You need to figure out the level of your  firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
    What is Open Firmware?
    The firmware on a PPC is called Open Firmware. Open Firmware software receives control when you poweron your machine.  It does some hardware testing and some hardware configuration then passes control to your version of Mac OS.   It reside on a PROM ( program read only memory ) chip on the logic board.
    Figuring out what level of Open Firmware you have?
    1) Mac OS 9.x or 8.x, you need to use the Apple System Profiler.
    Apple -> Apple System Profiler
    2) Mac OS X, use the System Profiler.
    Apple -> About This Mac
    click on the More Info... tab
    click on Hardware
    read the Boot ROM Version
    3) Open Firmware, boot into Open Firmware.
    Power on your iMac while holding down command+option+o+f
    The first output line contains the firmware level. Mine reads:
    Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
    Copyright 1994-2001 Apple Computer Inc.
    On my machine, I have 4.1.9f1.
    What firmware do you need?
    http://support.apple.com/kb/HT1395
    You can download the firmware from this page:
    http://support.apple.com/kb/DL1283
    filename: N-iMac_FWUpdate_4.1.9.smi.bin
                    avoid   expanding the file on the download computer.
    For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
    http://support.apple.com/kb/DL1283
    "The iMac Firmware Update 4.1.9 will only run on iMac computers with slot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
    You can download the Mac OS 9 updates from the Apple site.
    http://support.apple.com/kb/HT1387?viewlocale=en_US
    For tiger, you need 256meg of memory.  A slot loader will take 1gig of memory.
    You may need to get more memory.
    get the 512meg card(s)
    http://eshop.macsales.com/shop/apple/memory/iMac/G3_450MHz_500MHz_600MHz_700MHz
    Mac OS X 10.4: System requirements
    http://support.apple.com/kb/HT1514
    PPC 10.4.11 combo update.
    http://support.apple.com/kb/dl170

  • IMessage on iMac freezes  after changing apple ID

    I changed apple ID. My iMessage started freezing the computer for at least 3- 10 or more minutes. It's an ID issue I'm told because I opened new account on mac and as soon as I logged in Apple ID iMessage and it did same thing to that account called Tester.

    Hi,
    In that case contact Apple Support and ask them to look at the iMessages server with regard to your Apple ID.
    The use of the Apple ID is device specific and it can be "refused" for a Mac when and iPhone still works.
    As Level 1 people at Apple Support tend to Script Led you may need to ask to speak to a Level 2 person.
    Even then you may have to endure some testing such as looking at the Keychain.
    8:06 pm      Wednesday; April 29, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • MBP Retina Freeze after migration and no option for Reinstall

    Hello,
    just want to inform you, I have just maked the migration to my new MBP retina and have a problem that it will freeze only option is to boot in safe mode.
    Have deinstalled apps which could be the problem such as Paralles desktop, Symantec Endtime protection, SMC Fan... still have the problem with all users.
    Deleted the Startubitems, launchagents and deamons still the same problem.
    So I wanted to make a complete reinstalltion and here is the problem the apple server do not let me make the reinstallation.
    This version of Mac OS x 10.7 cannot be installed on this computer
    Answer for the support they have to get in contact with the Itunes department this can take 2 days. So I can only enjoy my mbp in safe mode.
    Kann someone help me to fix the freesing after the migration?

    I can try that but I am afraid that I do than not even have the safe mode any more. Will spend 1-2 more hours to fix the problem, because after the reinstallation I will do the same migration and may end at the same situation.
    So better try to fix it.
    Fix the spotlight index crash and know have a new one I386_pmGetDeadline: Null pointer.
    This have to do with the power management. Will try that and than let us see.

  • Xf86-video-ati: system freezes after changing power profile to low?

    I am running multihead with awesome-wm and the latest xf86-video-ati drivers (not from testing). when i change the power method to profile and change the power profile to low, the screen flashes, my temps start to go down and everything seems normal. a few minutes later the system hard freezes, can't ctrl-alt-del, power button doesn't work on a single press (have to press and hold). i don't have this problem when running dynpm but because i am running dual screens, the temps don't drop at all and hover around 66 degrees.
    card is a radeon 6950.
    this is a fresh install of arch, had arch installed on the same system about a year ago and didn't have this problem at all.

    If I remember correctly this is known to be possible to happen (is that real english? ). In this case, just don't put it to "low", since it's quite experimental.

  • After Changing the start date for a task in a project we are not able to save

    Hi 
    When we are updating the task start date of a particular task the below message is poping up in Project Professional and when we trying to update in Pwa and saving it automatically the save is becoming undone. 
    We are logging in with that user credentials and checking where the user has not charged any actuals on that task.
    Then a message pops up saying:
    "The actual work in "xxxx" is out of sync with the actual work updated from timesheets. Actual work can only be updated by team members through PWA. Changes you have made to users' actual work will be lost during the save."
    Can any body throw some light on the above issue.
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    It seems you have enabled the option in server setting >> task Settings and Display >> Protect User Updates>> for restricting updates to PWA only ? this is one cause when this error message appears when the update restriction is to PWA
    and PM tries to modify the Plan, the only exception to this is milestones which can be updated via Proj pro,
    this being the case becomes a conflict when you say updates can be done only via PWA and try to overwrite the actual via MSP 
    kirtesh

  • Error after changing theme in xcelsius for custom component

    Hi Experts,
    I have created a custom datefield component with inputbinding. The component is working fine in xcelsius. but when I change theme/color scheme in xcelsius, while previewing, it throws me an error:
    An error  occured when loading the file. The SWF was not created. For more information contact the file creator or your system administrator.
    This error comes only once and when I preview again, it works fine untill i change the theme/color scheme again in xcelsius.
    Has anyone encountered such problem ?
    Thanks

    We also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
    A connection error.
    - Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
    - ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1

  • Acarbat Freezed after installation and run it for Mac Pro!

    Dear all,
    I tried to install Acrobat 9 Pro to one station this morning (or install
    Adobe Reader 9 couple days ago), but the system hanged after installation
    and ran it. Clicking "force quit", it showed that "Acrobat (no response)".
    Following are the general description about the workstation and it is
    connected to Mac server.
    Workstation which tried to install Acrobat 9 Pro:
    - Mac Pro Processor: 2* 3GHz Dual-core Intel Xeon
    - Memory: 4GHz
    - Mac OS X 10.5.6
    Server
    - Mac Pro Processor: Dual 2 GHz Power PC G5
    - Memory: 3GHz
    - Mac OS X Server 10.5.6
    - Service: AFP, FTP, Open Directory (control the use login for all
    workstations)
    Installation procedures:
    - Login the workstation as an Administrator (local)
    - Install Acrobat 9 PRO
    - Registration
    - Shut down the workstation after installation
    - Restart the workstation
    - Use my unique name to login (all my files are stored in Server)
    Problem:
    - Double-click "Acrobat 9 Pro" to run the software, it hangs
    or
    - Click one PDF file and use "Open with" to select "Acrobat 9 Pro", it
    hangs again.
    Does anyone have the same situation or have any idea to solve this
    problem?
    I really appreciate your kind help.
    Best,
    Ei-Wen

    Home>Library>Preferences>com.apple.SoftwareUpdate.plist.  Trash this file, repair permissions and restart your computer.  Empty the trash when done.
    P.S.  If you shut down your computer, the window should have disappeared.  Why didn't you use Force Quit?

  • After changing my primary email for Apple ID, iCloud has issues

    I recently changed my apple ID primary email address as the old email address is not obsolete which meant I had to turn off iCloud on all devices and log back in so that the username/email was correct for password verification. Now that I have done this, iCal has 7 calendars, reminders has about 4-5 reminders lists and contacts has about 500+ blank contacts.
    When I go to delete these extra calendars, reminders and contacts. They delete but within a few seconds they reappear. I've rebooted, I've tried deleting them through icloud.com and also directly from each device. I have 3 devices using icloud. I have turned off 2 of them at a time and tried deleting from the remaining device.
    Has anyone got a solution please?!!?? Starting to get frustrating.

    The contacts part of my post above has been resolved. I don't think it was related. I am still unfortunately stuck with additional reminders lists and calendars that do not stay deleted.

  • HT4859 I am unable to recover a rented movie after changing one iPad for another. Music and books were easily restored

    I am unable to restore a rented movie after Changing out my iPad for a new one. All music and books were restored easily

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Maybe you are looking for

  • Rookie needs help with program!!

    Hi everyone, I am new to JAVA programming and am trying to figure out my first progam. Any suggestions? Here's what I have to come up with... This program will test your ability to code a loop function and some work with the strings methods. INPUT A

  • Embedded map in tabbed panel not centered

    When I embed the html code from google maps to a tabbed panel for a particular location, that location does not appear in the center of the map but is just off the map at the upper left-hand corner.  In preview mode, property is centered, but in publ

  • Saving spool request  in PDF format  using background job

    Hi, We have some important jobs which create spool requests. My requirement is to save those spool requests either on front end  or on application server in pdf format. I tried with  program RSTXPDF4 but i can save those files only when pdf conversio

  • Publising message in weblogic cluster

    Hi all,           Is it possible to publish a message to all servers in weblogic clustering?           Hope to receive suggestions.           Plad

  • Looping over multiple rows of data to output one row

    My query is giving me the appropriate data, but I need to only have one row per 'MANAGER' in my output - not one for each 'JOB'. Now the output looks like this: manager 1 ... period 1 $ .... period 2 $ .... period 3 $ manager 1... period 1 $ .... per