Frequency Response Analyser: Error -1802 occurred

Hi,
I'm fairly new to Labview but feel I know most of the fundamentals.
I've been trying to convert the following bit of code from Matlab to Labview (I am aware 8.20 has a math script function but I don't have access to it). Please could someone have a look at my VI and possibly tell me why I am getting the 1802 error. It suggests that "(Hex 0xFFFFF8F6) Waveforms have different dt values." but I'm not sure what this means or how to fix it.
Also, if anyone has any constructive critisism of my methods for implementing the code then I would love to hear them.
Many thanks for your time in assisting me,
Ian Haigh
% routine for calculating Transfer Function
% signal is the array containing the measured signal
% sigs is the array containing the input sine wave
% sigc is the array containing the input cosine wave
clear;
freq=11.45;
sfreq=360*freq;
cycs=10;
a=0;
b=0;
i=1;
for t=0:1/sfreq:cycs/freq;
n=cycs*360+1;
ph=60;
signal=0.37*sin(2*pi*freq*t+ph*pi/180);
time(i)=t;
sigs=sin(2*pi*freq*t);
sigc=cos(2*pi*freq*t);
real(i)=signal.*sigs;
r=real(i);
comp(i)=signal.*sigc;
c=comp(i);
a=a+r;
b=b+c;
i=i+1;
end
a=(2*a-real(1)-real(n))/(n-1);
b=(2*b-comp(1)-comp(n))/(n-1);
R=sqrt(a*a+b*b)
ang=atan(b/a)*180/pi
Attachments:
Frequency Response Analyser v7.vi ‏1045 KB

Hi Ian,
It seems that you are attempting to use different dt in the waveforms, but I founded in this link two ways to avoid having this problem. Hope you find it useful. Thanks for using the forums!
http://digital.ni.com/public.nsf/websearch/C41966093C3D030F86256FF8007F8BF5?OpenDocument
NorSa
AE LATAM
NorSa
NI Applications Engineer Latin America
Para Soporte entra aquí

Similar Messages

Make frequency response analyser using frequency generator and counter

Hello
Can we make a frequency response analyser using a Frequency generator and frequency counter?
How to add modulation with it? Modulation frequency is to be varied as per the input to given to the carrier!
The outputs are Frequency, magnitude, and the phase as like solartron FRA.
somebody have an Idea for this
awaiting for the solution
thank you
"Thanks with regards "
by
..........Gireesh..........

Hello Gireesh,
You can use a function generator to generate frequencies and use the modulation tollkit and other tools availabe with LabVIEW to do the modulation part . Or you can use the analog output ports on the daq card to generate different frequency signals for the same purpose .This should pretty much serve your purpose.
http://zone.ni.com/devzone/cda/epd/p/id/5646
http://digital.ni.com/manuals.nsf/websearch/AF3615F31CE9656C862576070020B8F7

Frequency Response Analyser or Impedance Spectroscopy

Hi
I am looking for a Labview program to allow the freq. response of say a
tuned circuit.
I will be using a GPIB Function Gen. From 1Hz to 10MHz and measuring the
peak-peak value across a shunt resistor that is in series with the tuned
circuit.
Thus as the frequency increases then the tuned circuit will respond
accordingly. If we take samples every 100Hz then we can produce a spectra
of the tune circuit.
I actually going to use this for measuring the char. of an electrochemical
cell.
Any Suggestions
Wayne

Thanks Carlos
The latter method I did not think of but will try it.
Cheers
Wayne
"JuanCarlos" wrote in message
news:[email protected]..
> Wayne,
>
> Looks like a sweep sine analysis should give you a good idea about the
> frequency response. Make sure that you measure the input and output
> signals of the circuit; this way you can just compeir RMS values and
> get the frequency response.
>
> Another method that you may want to look into is a broad band
> frequency response. Basically you send white noise to the circuit;
> then you acquire the input noise and the output noise; the you
> calculate the FFTs of this data and compair it; after some averaging
> you get the frequency response graph of your dev
ice. LabVIEW has a VI
> called Frequency Response Function that does a large part of the job;
> together with the "Frequency Analysis of a Filted Design.vi" example
> you can get a good idea on how to perform this test.
>
> I hope this helps.
>
> Regards,
>
> Juan Carlos
> N.I.

Frequency response - sound and vibration

Hi,
I need to find the frequency response of the DUT. I am using the NI example from sound and vibration toolkit to do
so (LabVIEW 8.5\examples\Sound and Vibration\Getting Started\SVXMPL_Getting Started with Swept Sine (DAQmx).vi) now my problem is
to tabulate the phase difference between the stimulus and response when i do it i get constant values. Even though i dont give any response
signal to the channel i get the wave same as stimulus, is it suppose to be like that !!!!!!!!!! I will attach my vi so that it gives the idea where
i am measuring the phase difference pls check it and help me with this.....thank you in advance.
Attachments:
DAQ Freq resp (req)_trial.vi ‏121 KB

What is the DAQ card you are using for executing this Frequency Response?
This DAQ error is related to the output frequency of your signal higher than the possible output rate of the card. Basically, you are trying to update at a rate higher than the capability of the card.
For doing Frequency response, generally you need to have a NI DSA card (446x/447x/449x) with one Analog output and two analog inputs (minimum). Generate the swept sine signal from the Analog output channel, give this signal as input to your DUT and also to one of the Analog input channel. This input to your Analog input channel will act as your Reference signal. Then the response signal from your DUT, connect it to another Analog input channel. You would get a very good response results.
The reason why you need to have a DSA board is that, for doing Frequency response, we need to acquire both high frequency and low frequency components without much loss. This is possible only if your DAQ board has a higher dB value (in the range of >110dB) which is present only in DSA boards.
I have completed a Frequency Response Analysis just a week back with the same example programs. So there wont be any problem with that vi.
Regards,
Sundar Ganesh

I get "an error has occured" when trying to download from the AppStore. I can not re-download as the button is not active.

I encountered the response "an error has occured" when I downloaded Maverick X from the App Store. I can not try to re-download as the download button is not active. I have tried rebooting and to get the download from apple.com but it keeps redirecting to the App Store.
Suggestions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Error:unknown error has occured;server returned http response code :500

Hi,
 I deployed one custom action block on 12.0 server.
 It creates a pdf doc and saves it under c:\sample on MII server.
 But when I run the action block in a trax, an error was logged: unknown error has occurred; server returned http response code :500 <server URL>
Need immediate help on this.
Thanks

Does the failure occur within the action, and if so can you identify where? It is always a good idea to put some logging at the debug level in your actions to help identify exactly where a failure is occuring.

Why do I get a Track out of memory error while running open loop frequency response?

MatrixX Build 61mx1411: I get a "Track out of memory" error when I run the Open Loop Frequency Response from the MatrixX pull down tools. What can I do to prevent this? We are running on an HP B1000 with 768 MB of RAM under HP-UX 10.2.

In the old days of Mx say Version 5 and prior the user actually selected the amount of memory that would be allocated. Depending on the size of the model etc. you would have to allocate memory. In version 6.0 and going forward there is no need for the user to manually allocate the memory.
Build {rstack=50000,istack=200000,sstack=50000,cstack=500 000}
If this is a command in a script file that you are running and the error is resulting from that then I would try commenting out everything after the letter d in the word build and then starting it back up.
i.e. only use Build
I don't believe that there is a way to manually allocate the initial SystemBuild Stack size.
I believe initially the stack size is set to 10010.
However, one way
you can manually set the initial SystemBuild stack size,is to create a large StateSpace as soon as you start up SystemBuild. This will prevent piece-meal reallocs while using SystemBuild.
You can created a new SuperBlock in SystemBuild and then drop down a StateSpace Block with 199 inputs and 199 Outputs and 1 State and entered ones(200,200)as the StateSpace Matrix without any problems. This would resize this internal stack to at least 40000.
You really should not have to do this but if that helps then you might think about doing this in your startup.ms file you could use SBA or load the file then you could delete the superblock and begin working.
"Bob" gave me this little tid bit.
Please let me know if any of this is of use.
Garrett
Garrett Thurston
[email protected]
Phone: 781.993.5540

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005 Description: "Internal error: An une

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???

You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog

BEA intercepts response with "An error has occurred"

Hello,

I am using BEA 8.1 SP6 on Solaris. I also have my portlets running over WSRP (both consumer and producer are teh same BEA version). I have an odd behavior which hopefully someone can explain.

Scenario: I do an AJAX call to a servlet which then makes a web service call to another server. The actual web service call is embedded within a try/catch block.

If the web service is not running, for example, my catch block catches a ConnectionException error.

In the situation I have run into, however, the problem is that my web service call goes out over the network and it will eventually timeout. I know it will timeout because my catch block debug tells me that I get a connection timeout. My client never gets that information, however, because sometime during that process BEA has intercepted the response object and sends back the following HTML response:

----------------------- 
<\!-- Generated by Weblogic Workshop -->
<!DOCTYPE HTML PUBLIC"-//W3C//DTD HTML 4.01 Transitional//EN">
<html="en">
<head>
<title>Error</title>
</head>
<body>

An error has occurred:

<blockquote>

</blockquote>
</body></html>
<\!-- Some browsers will not display this page unless the response status code is 200 -->
 ---------------------------
Again, my server is still processing the web service call and will eventually catch a timeout error but that info does not get back to the client because BEA has hijacked the response.

Does anyone know why or how this is happening?

Thanks - Peter Len

I believe I have found the issue.
Our portlets are being accessed over WSRP. Both consumer and producer portals are BEA 8.1 SP6. The problem was that the HTTPS call back to the producer timed out on the consumer so it was the consumer portal that hijacked the response to the producer request.
In the consumer's WEB-INF/wsrp-producer-registry.xml file, there is the element "connection-timeout-msecs". The default is 60000 ms. When I switched that to a larger time (say 999999 ms), I did not see the problem.

Frequency response function modal analysis

After reviewing the signal analysis functions in DIAdem I have realized them to be a bit limited for modal analysis. I have a couple hammer impact tests that I need to process a frequency response function for, and since this is brand new to me I'm not seeing anything in the embedded function list that is going to help me. I was wondering if anyone out there has a couple of pointers on generating a FRF plot for modal hammer impact tests. I did notice that the ChnFFT2 command allows me to generate a transfer function, coherance, and FFT Cross Spectrum channels for analysis. Though I might be confused and this may be everything I need. My FFT2 settings are below.
[code]
FFTIndexChn      = 0
FFTIntervUser    = "NumberStartOverl"
FFTIntervPara(1) = 1
FFTIntervPara(2) = 2500
FFTIntervPara(3) = 1
FFTIntervOverl   = 0
FFTNoV           = 0
FFTWndFct        = "Rectangle"
FFTWndPara       = 10
FFTWndChn        = "[1]/Time axis"
FFTWndCorrectTyp = "No"
FFTAverageType   = "No"
FFTAmplFirst     = "Amplitude"
FFTAmpl          = 1
FFTAmplType      = "PSD"
FFTCrossSpectr   = 1
FFTCoherence     = 1
FFTTransFctType = "Spectrum H0"
FFTCrossPhase    = 0
FFTTransPhase    = 0
Call ChnFFT2("[1]/Time axis","'[1]/H_1' - '[1]/H_4'","'[1]/A_1' - '[1]/A_4'") '... XW,ChnNoStr1,ChnNoStr2
[/code]

Standard modal analysis has something denoted as FRF. I have a labview application note "The Fundamentals of FFT-Based Signal Analysis..."
Frequency Response Function
The frequency response function (FRF) gives the gain and phase versus frequency of a network and is typically computed as
where A is the stimulus signal and B is the response signal.
The frequency response function is in two-sided complex form. To convert to the frequency response gain (magnitude) and the frequency response phase, use the Rectangular-To-Polar conversion function. To convert to single-sided form, simply discard the second half of the array.
You may want to take several frequency response function readings and then average them. To do so, average the cross power spectrum, SAB(f), by summing it in the complex form then dividing by the number of averages, before converting it to magnitude and phase, and so forth. The power spectrum, SAA(f), is already in real form and is averaged normally.
Refer to the Frequency Response and Network Analysis topic in the LabVIEW Help (linked below) for the most updated information about the frequency response function.
http://zone.ni.com/devzone/cda/tut/p/id/4278
So the options for FFT2 are
No
DIAdem does not calculate a transfer frequency response.
Spectrum H0
DIAdem calculates the transfer frequency response by dividing the FFT of the output signal (A) by the input signal (E): FFT(A)/FFT(E). DIAdem averages the amplitudes of the individual transfer functions.
Spectrum H1
DIAdem specifies the cross spectrum and the auto spectrum for each signal pair. DIAdem calculates the transfer frequency response by dividing the averaged spectra: Middle(cross(A,E))/middle(auto(E)). DIAdem does not average phases, because phases can delete each other.
Spectrum H2
DIAdem specifies the cross spectrum and the auto spectrum for each signal pair. DIAdem calculates the transfer frequency response by dividing the averaged spectra: Middle(auto(A))/middle(cross(E,A))
If you assign the values Spectrum H1 or Spectrum H2 to the variable FFTTransFctType, DIAdem averages and divides the cross spectra and the auto spectra and calculates the amplitudes last.
Which state auto spectrum when FRF is power spectrum.

Error -23011 occurred at LabVIEW Analysis ODE Solver/inconsistency in dimensions of X(0), F and X!

Hi,
I have been trying to simulate ODE but getting following error:
Error -23011 occurred at LabVIEW Analysis ODE Solver/inconsistency in dimensions of X(0), F and X!.
The screenshot of the code is attached.
Please let me know if anyone knows the reason of having this error.
Thank you.
-HB
Solved!
Go to Solution.
Attachments:
Screen Shot 2014-12-02 at 09.58.08.png ‏60 KB

Hi,
I have added another code which includes the "simple chemical reaction" which I am trying to model using ODE in LabVIEW, but I am continously having the same problem.
Kindly see the attachment and try to help me out solving this issue. I couldn't found this kind of error listed on NI forum.
Thank you.
Regards
Hasan
Attachments:
test_hb.vi ‏22 KB

Error 7 occurred at _createExplicitChildObject.vi DIAdem report express

I am using DIAdem Report express in LabVIEW. I made a change in the file name and now it works most of the time but is generating an error. Sometimes it doesn't work.
C:\Neuronetrix_Sync\Development\LabVIEW Test System\SC-1673\Logs\110091507\110091507 Frequency Response 5983823
This is the file path, it is constructed using string tools and then converted using string to path, then create folder then piped to the DIADEM report and Export Image function.
I get an error that cancels out the program the first time, then on subsequent runs it works just fine but still generates an error.
Error 7 occurred at _createExplicitChildObject.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
Error 7 occurred at _createExplicitChildObject.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Attachments:
FILE name error.png ‏18 KB

In the screen shot you can see I am using to DIAdem expresses. When I was using just one express, and have everything wired up correctly, and everything works, i'm still getting the error.
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay

Error has occurred in UPDATE_INFOCUBE

Hi All,
Iam working on SRM (Bidding Engine) area, i have used the standard info Cubes and DSO only.
Data Flow is Info Cube 0SR_BIDC1 is getting updated through three DSO: 0BBP_BID, 0BBP_QUO, 0SR_BIDO1.
Out of which when iam updating the data from these three DSO, data is getting updated sucessfully through two ODS with out any error but with one DSO i.e., 0BBP_BID it is giving me the error Error has occurred in UPDATE_INFOCUBE.
when i check in the step by step analysis it is giving me this message:
*Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
    The error message(s) was (were) sent by: Update rules*
can anybody suggest me the approach how i can proceed further.
Regards
Prabhakar

Hi Kishore,
Yes, there is a start routine in the update rules. i have checked the code, but in that routine only one field is refered for the updation Processing Status of the BID (0BBP_PROBID)
Code is as follow's:
LOOP AT DATA_PACKAGE.
    IF DATA_PACKAGE-bbp_probid = 'I1009'.
bid invitation is held*
      DELETE DATA_PACKAGE.
    ENDIF.
ENDLOOP.*
Please check this one, an early reply is appreciated.
Regards
Prabhakar

SQL error 3113 occurred when executing EXEC SQL.

Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors    DBIF_DSQL2_SQL_ERROR
      Occurred on    08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:,                                      , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500              mara.ntgew,
009510              mara.gewei,
009520              mara.volum,
009530              mara.voleh,
009540              mara.mstae,
009550              mara.mstde,
009560              mara.prdha,
009570              marc.matnr,
009580              marc.werks,
009590              marc.mmsta,
009600              marc.mmstd
009610        into :w_ops-groes,
009620              :w_ops-brgew,
009630              :w_ops-ntgew,
009640              :w_ops-gewei,
009650              :w_ops-volum,
009660              :w_ops-voleh,
009670              :w_ops-mstae,
009680              :w_ops-mstde,
009690              :w_ops-prdha,
009700              :w_ops-matnr,
009710              :w_ops-werks,
009720              :w_ops-mmsta,
009730              :w_ops-mmstd
009740        from sapr3.mara, sapr3.marc
009750        where sapr3.mara.mandt = sapr3.marc.mandt
009760          and sapr3.mara.matnr = sapr3.marc.matnr
009770          and sapr3.mara.mandt = :p_mandt
009780          and sapr3.mara.matnr = :w_ebs-matnr
009790          and sapr3.marc.werks = :p_owerks
    >    ENDEXEC.
009810 endform.                    " extract_general_data
009820 *&
009830 *&      Form append_i_ops
009840 *&
009850 *      Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880    append w_ops to i_ops.
009890 endform.                    " append_i_ops
009900 *&
009910 *&      Form extract_material_description
009920 *&
009930 *      Extracts a Material Description from the remote database an
009940 *      modifies the current record in I_OPS.
009950 *
009960 *        >P_SPRAS Language Key
009970 *
009980 form extract_material_description using    p_spras.
009990    EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0                            SY-INDEX 0
SY-TABIX 1                            SY-DBCNT 1
SY-FDPOS 18                            SY-LSIND 0
SY-PAGNO 0                            SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
                              2
                              0
W_OPS-GROES
                              22222222222222222222222222222222
                              00000000000000000000000000000000
W_OPS-BRGEW                    #######
                              0000000
                              000000C
W_OPS-NTGEW                    #######
                              0000000
                              000000C
regards,
krishnaiah.

Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod

Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide

Frequency Response Analyser: Error -1802 occurred

Similar Messages

Maybe you are looking for