Error -23011 occurred at LabVIEW Analysis ODE Solver/inconsistency in dimensions of X(0), F and X!

Hi,
I have been trying to simulate ODE but getting following error:
Error -23011 occurred at LabVIEW Analysis ODE Solver/inconsistency in dimensions of X(0), F and X!.
The screenshot of the code is attached.
Please let me know if anyone knows the reason of having this error.
Thank you.
-HB
Solved!
Go to Solution.
Attachments:
Screen Shot 2014-12-02 at 09.58.08.png ‏60 KB

Hi,
I have added another code which includes the "simple chemical reaction" which I am trying to model using ODE in LabVIEW, but I am continously having the same problem.
Kindly see the attachment and try to help me out solving this issue. I couldn't found this kind of error listed on NI forum.
Thank you.
Regards
Hasan
Attachments:
test_hb.vi ‏22 KB

Similar Messages

I tried to update my ipod but then it didnt work saying that an unknow error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it is on my screen, i dont know what to do?

i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

Everytime I open GarageBand, I get the following error message: an error has occurred with an installed audio unit plug-in...what is this and how do I fix it?

HI, I am new to this and trying to open this app but keep getting this message. Anyone help me define this and a fix if needed, thanks.

Try reinstalling the software.

Error -201064 occurred at _DAQmxImportConfig.vi

I have an exported NI MAX configuration file from another machine, call it x.nce. I successfully imported this to my machine using MAX, but now I wantto import all of the tasks, channels, scales into a Labview project.   The .nce file isn't supported for import into Labview 8.6 projects (only .txt and .init files are supported in Labview Projects),so I exported the information to y.txt. I then attempted to import this into my labview project, but an error occurred:
Error -201074 occurred at _DAQmxImportConfig.vi, possible reason(s): Measurements: Import operations supports tasks, channels, and scales only, but a hardware object was found in the file. Remove the hardware objects from the input file.
I attempt to export the tasks, channels, and scales from MAX, but the tasks and channels are dependent upon one of the Devices, so I had to included the device in the export. I then editted y.txt and removed the sections [DAQmxDevice] and [DAQmxAccessory]. Then I attempted to import this new z.txt file into my Labive project. But now I get the error:
Error -201064 occurred at _DAQmxImportConfig.vi, possible reason(s): Measurements: Configuration file is missing the required header fields. Add required header informaiton at the top of the text file prior to any data. Line Number: 1
I have other MAX configurations that I've successfully exported from other Labview projects and I've been able to import these configurations into this project. I thought the purpose of having import/export was so that you don't have to hassle with hand-editting these files.
So, how do I go about importing a configuration exported from MAX into a Labview project space? (had this been done originally, I could have just opened the project and ran with it).
If I hand edit the exported file so that it only includes a couple of channels, (as in the attached file: test1.txt), it still fails.
[DAQmx]    MajorVersion    MinorVersion
    8    7
[DAQmxChannel]    AO.Max    AO.Min    AO.OutputType    AO.TermCfg    AO.Voltage.Units    ChanType    Descr    PhysicalChanName
LoadBank_Command    10    0    Voltage    RSE    Volts    Analog Output        Dev1/ao2
VFD_Speed_CMD    10    0    Voltage    RSE    Volts    Analog Output        Dev1/ao3
Attachments:
test.txt ‏1 KB

After reviewing the test.txt file that I posted, I saw that it showed some graphic characters in it. Opening test.txt (generated by MAX) with a binary editor revealed that the MAX Exported .txt file used NULL (ascii zero) instead of SPACES (ascii 32) for spaces and that the Project import function could not handle the NULL.
I switched from .txt to a .ini file, but still had to hand edit the file to delete the hardware section, and then I was able to imported the configuration into the project space okay.
So NI, if this isn't already on your list, how about checking this out?
And why can't you ignore the hardware portion of a configuration if you don't want to load it into the project space so I don't have to hand edit it?
Attachments:
Null_instead_of_spaces.gif ‏46 KB

There was a problem downloading ... An unknown error has occured -42018...

Dear all,
After upgrading to i-tunes 7 I'm not able anymore to download music. If I run diagnostics everything seems fine.
"Microsoft Windows XP Professional Service Pack 2 (Build 2600)
MICRO-STAR INC. MS-6580
iTunes 7.0.1.8
Current user is an administrator.
Network Adapter Information
Adapter Name: {C38C64FE-F7B8-4ABE-8DC0-9B8B549A6690}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 10.0.69.101
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.69.1
DHCP Enabled: Yes
DHCP Server: 10.0.69.1
Lease Obtained: Sat Sep 30 16:54:05 2006
Lease Expires: Sat Oct 07 16:54:05 2006
DNS Servers: 10.0.69.1
Network Connection Information
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful."
However downloading the songs I bought doesn't work.
Following error:
"There was a problem downloading "...". An unknown error has occured (-42018). Please check that the connection to the network is active and try again."
But my network is active and the diagnostics turn out OK. Please help me out!! I have songs to be downloaded that I have already payed for.

This didn't work for me, but to any who may be interested, I also was experiencing unknown error -42018 when attempting to download purchased music. Additionally, I was stuck in an endless authorization loop when attempting to play previously purchaed music. All this started when I installed the latest iTunes software 7.0.2. But I managed to fix the problem on my machine.
I run windows XP Pro, and unlike the majority of users I actually set it up correctly with a dedicated administrator account, and regular user accounts instead of just running as admin all the time. For me, that was the cause of the problem.
The new version of iTunes software required FULL CONTROL privilages on the iTunes and iPod install directories for all user accounts that were using the program. (Previous versions worked fine, so this is a new thing.) Once I provided those permissions, iTunes worked correctly. Follow this link: http://support.microsoft.com/kb/304040 for information on how to provide FULL CONTROL to every user account.
I hope you all find this helpful in solving your problem.
Good Luck,
Bill

"An error has occurred. Please try again later"

Hello,
I got a problem with my Blackberry Curve9300 3G. It worked properly for the past year but since today, whenever I want to log myself into the Blackberry App World,
"An error has occurred. Please try again later" is displayed.
I tried almost everything and asked a lot of friends who got the same problem. They all solved it with changing the time settings or resetting their blackberry completely. So accordingly, it is not a time/date error, nor is it a resetting problem. I also changed my Blackberry ID in case that would have helped but it did not!
My problem is apparently the KB25882 thing.
The given page of Blackberry to help this problem describes my problem but the given solutions do not solve my problem!
I can not get into BlackBerry App World nor can I download any Apps!
Thank you so so much for your help, hoping for a quick answer!
Sincerely,
Alex

Hi and Welcome to the Community...apologies for the delayed reply...hopefully you resolved your issue, but just in case!!
There are many other KBs with that situation...please review them as well to see if they apply. Also please search out other threads on this topic...there are many, with many different solutions, one of which may work for you (and is already posted).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Run-time error "CONVT_NO_NUMBER" occurred

Hi,
   When I checked my Development System for logs (using SM21)I got the logs
which are as follows :
02:16:33 DIA 001 100 KMENON       VF02 AB0 Run-time error "CONVT_NO_NUMBER" occurred
02:39:27 DIA 000 100 KMENON            AB0 Run-time error "OBJECTS_NOT_CHAR" occurred
Can someone please help me to know what the above logs describe and what are the reasons for these Run-time errors and suggest the solution for these runtime errors.
Below is the description of the above logs which I can see in my Development System:
Details Page 2 Line 7 System Log: Local Analysis of SAPECCDEV                 1
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                   Date : 10.09.07
02:16:33 DIA 001 100 KMENON       VF02 AB0 Run-time error "CONVT_NO_NUMBER" occurred
Details
Recording at local and central time........................ 10.09.2007 02:16:33
Task................ 05532 / Dialog work process No. 01
User................ KMENON
Client.............. 100
Terminal............ alpha-pa
Session............. 2
Transaction code.... VF02
Program name........ SAPMV60A
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abmove1
Line................ 1892
Error text.......... ab_Zappy
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. CONVT_NO_NUMBER
Technical details
File................ 000008
Position............ 0000235800
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_Zappy                                            abmove1 1892
Details Page 2 Line 10 System Log: Local Analysis of SAPECCDEV                1
Time     Ty. Nr Cl. User         Tcod MNo Text                                                                   Date : 10.09.07
02:39:27 DIA 000 100 KMENON            AB0 Run-time error "OBJECTS_NOT_CHAR" occurred
Details
Recording at local and central time........................ 10.09.2007 02:39:27
Task................ 05576 / Dialog work process No. 00
User................ KMENON
Client.............. 100
Terminal............ alpha-pa
Session............. 2
Transaction code....
Program name........
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abtchk
Line................ 0543
Error text.......... ab_jtychk
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. OBJECTS_NOT_CHAR
Technical details
File................ 000008
Position............ 0000236520
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_jtychk                                           abtchk 0543

Hi Joerg,
         Actually I don't know about ABAP Programming but I can send you the ABAP source code which is as follows:
       Modulpool zur Fakturierung
       Report-Header / Tabellen / Daten / Field-Symbols
         INCLUDE MV60ATOP.
       PBO - Module alphabetisch geordnet
         INCLUDE MV60AO0C.
         INCLUDE MV60AO0D.
         INCLUDE MV60AO0F.
         INCLUDE MV60AO0I.
         INCLUDE MV60AO0R.
         INCLUDE MV60AO0S.
         INCLUDE MV60AO0T.
         INCLUDE MV60AO0V.
         INCLUDE MV60AO0X.
         INCLUDE MV60AOTX.             "Textverarbeitung
       PAI - Module alphabetisch geordnet
         INCLUDE MV60AI0B.
         INCLUDE MV60AI0D.
         INCLUDE MV60AI0F.
         INCLUDE MV60AI0K.
         INCLUDE MV60AI0N.
         INCLUDE MV60AI0R.
         INCLUDE MV60AI0V.
         INCLUDE MV60AI0X.
         INCLUDE MV45AITX.             "Textverarbeitung
       PAI - Module alphabetisch geordnet
         include mv60av0v.
       FORM-Routinen alphabetisch geordnet
         INCLUDE MV60AF0B.
         INCLUDE MV60AF0C.
         INCLUDE MV60AF0E.
         INCLUDE MV60AF0F.
         INCLUDE MV60AF0K.
         INCLUDE MV60AF0N.
         INCLUDE MV60AF0S.
         INCLUDE MV60AF0T.
         INCLUDE MV60AF0V.
         INCLUDE MV60AF0X.
       INCLUDE-Baustein zur Nachrichtensteuerung
         INCLUDE FV61BF00.
INCLUDE MV60AI0P_PASS_FCODE.
INCLUDE MV60AI0G_GET_FCODE.
INCLUDE MV60AO0P_PRICING_SET_DATA.
INCLUDE MV60AI0P_PRICING_GET_DATA.
INCLUDE MV60AI0S_STATUS_6900.
INCLUDE MV60AO0F_TABLECONTR.
INCLUDE MV60AO0P_PBO_TABSTRIP.
INCLUDE MV60AF0P_PBO_TABSTRIP.
INCLUDE MV60AI0P_PAI_TABSTRIP.
INCLUDE MV60AF0P_PAI_TABSTRIP.
INCLUDE MV60AO0R_REGULIERER_ADRESSE.
INCLUDE MV60AI0X_XVBRP_INIT.
INCLUDE MV60AF0X_XVBRP_INIT.
INCLUDE MV60AF0P_PBO_TABSTRIP_EXPORT.
INCLUDE MV60AF0P_PBO_TABS_INIT_EX_ITEM.
INCLUDE MV60AF0P_PBO_TABS_EX_ITEM.
INCLUDE MV60AI0P_PAI_EXPORT_HEADER.
INCLUDE MV60AF0P_PAI_EXPORT_HEADER.
INCLUDE MV60AI0P_PAI_EXPORT_ITEM.
INCLUDE MV60AF0P_PAI_EXPORT_ITEM.
INCLUDE TCRTDATA.
INCLUDE MV60AF0K_KURGV_TXTPA_ERMITTELN.
INCLUDE MV60AI0S_SD_PARTNER_GET_FCODE.
INCLUDE MV60AF0S_SD_PARTNER_GET_FCODE.
*INCLUDE MV60AF0X_XVBRP_TCTRL_SCROLLEN.
INCLUDE MV60AO0X_XVBRP_CTRL_INIT.
INCLUDE MV60AO0X_XKOMFK_TCTRL_INIT.
INCLUDE MV60AF0X_XKOMFK_TCTRL_SCROLLEN.
*INCLUDE MV60AO0X_XVBRK_TCTRL_INIT.
INCLUDE MV60AF0X_XVBRK_TCTRL_SCROLLEN.
*INCLUDE MV60AO0X_XKOMFK_TCTRL_INIT.
INCLUDE MV60AO0X_XVBRK_TCTRL_INIT.
*INCLUDE MV60AF0X_XVBRK_TCTRL_SCROLLEN.
*INCLUDE MV60AO0X_XVBRP_CTRL_INIT.
INCLUDE MV60AF0X_XVBRP_TCTRL_SCROLLEN.
INCLUDE MV60AF0X_XVBPA_KURGV_ERMITTELN.
INCLUDE MV60AO0C_CUST_HEAD_SET_DATA.
INCLUDE MV60AF0C_CUST_HEAD_SET_DATA.
INCLUDE MV60AI0C_CUST_HEAD_PASS_FCODE.
INCLUDE MV60AF0C_CUST_HEAD_PASS_FCODE.
INCLUDE MV60AI0C_CUST_HEAD_GET_DATA.
INCLUDE MV60AF0C_CUST_HEAD_GET_DATA.
INCLUDE MV60AO0C_CUST_ITEM_SET_DATA.
INCLUDE MV60AF0C_CUST_ITEM_SET_DATA.
INCLUDE MV60AI0C_CUST_ITEM_PASS_FCODE.
INCLUDE MV60AF0C_CUST_ITEM_PASS_FCODE.
INCLUDE MV60AI0C_CUST_ITEM_GET_DATA.
INCLUDE MV60AF0C_CUST_ITEM_GET_DATA.
INCLUDE MV60AO0C_CUST_HEAD_ACTIVATE.
INCLUDE MV60AF0C_CUST_HEAD_ACTIVATE.
INCLUDE MV60AO0C_CUST_ITEM_ACTIVATE.
INCLUDE MV60AF0C_CUST_ITEM_ACTIVATE.
Regards,
Ashish Thakkar

Error number 7 when LabView tries to open file

I get the following error when LabView tries to open a file -
" Error 7 occoured at Open File+.vipen File.
Possible reasons:
Labview: File not Found .
or
NI-488: Non-existent board.
Having searched through the archives here the error usually occurs when LabView cannot find the file. Well this time i know the file is there, i have even used the 'read from spreadsheet file' vi with the dialog box option to show LabView where the file is. When i copy just the open file code into another (blank) vi it runs correctly but in the middle of all my other code it kicks up this error. I ahve had the code working no problem before so this problem has just arose over the past week. Very frustrating.
Any help appreciat
ed

Hi,
You need to check the full path that you are passing to the Open File+.vi. Make sure that if you are deriving the file from say the file constants such as the Current VI's Path, that if the VI is contained in a LLB, then this will be in the path name. eg ..\myLib.llb\myActualVI.vi. Therefore, you will have to strip out the llb. Similarly, if you have built an exe file, the pathname will contain the myEXE.exe.
Hope this provides some pointers. If not then post your VI, so others can help pin point your problem.
Regards
Ray Farmer
Regards
Ray Farmer

I get "An unexpected error has occurred" whenever I try to create item in a list or view site permission page

I am working a SharePoint site with a custom masterpage and css. Everything displays just fine and the site functions with several subsites, and so forth. I have double-checked to ensure that important content placeholders were on the new masterpage, even
if they were "hidden" from view.
However, a new issue came up this week: I was moved from a contributor to a designer list so that I could convert word files in a doc library in web pages. When that change happened, I lost the ability to select "add new items" to lists or add
events to calendars. [not sure if causation, or just correlation] On a similar note, no one--not even those with higher permissions levels than me---can access the "site permissions" page in browser now (not sure if this coincides with my issue over
the lists/calendars, but in both cases the notification "an unexpected error has occurred" comes up).
I temporarily switched a subsite to the default masterpage, and lists and site permissions page functioned fine--no error. Therefore, it appears as though something in the custom masterpage (or embedded css?) is causing this error to come up. But what could
it be?
I ran across a forum question that mentioned a bug related to alternative css:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/53151269-dd61-4c71-8263-c1880450a1bb/sharepoint-2010-unable-to-access-site-settings-site-permissions-from-a-site-created-from-a-template Solutions
said to check the correlation ID and use powershell. The guy in my department who checked the correlation ID said that nothing useful came up, and I got the impression that the powershell solution didn't work out for him either (I don't work on that side of
things; I am on the design side).
So, does anyone have any idea what the problem could be? Again, I have checked and double-checked those content placeholders in my custom masterpage - they are all there. I built the site using one of Randy Drisgill's masterpage templates.
Up until this point, I haven't had any issues with the template, my custom code, etc.

I am having the same issue, was this ever resolved?

Corrupted/Locked out apple ID "An Unknown Error has occurred" logging into support?

I was forced to use a different apple id to log into this support community because all attempts from different devices and browsers using another ID have ended up at the password prompt with "An unknown error has occurred" at the community login screen. The ID can still be "manged" and appears to be able to make purchases from the iTunes Store over the internet. A phone incident case number 388249960 was opened and I spent over an hour on the phone with this problem. The ID in question was set up more than two years ago to help with my wife's iPad 1 which we paid 800 plus for,,, all the storage and bells and whistles. Recently she started using the iTunes store to purchase and download television series and we got in trouble because her directories were filling the c:drive on a Vista Business computer she normally uses. Before starting to deal with the problem of storage, I tried to make sure everything was up to date and downloaded/installed the latest iTunes 11.0,1,, to her machine. I already had it on another machine running Windows 7 and two older Windows XP machines. All of them were "tested" for home networking to our Apple TV so that I could go to the TV and find a computer which could be used as a source for streaming music, videos, etc., etc. all based on her ID. As of this writing, I believe all of that functionality still exists, but, when I navigate to support and try to log in using her ID and password, I get re-prompted for the password and then "Locked Out" when "An Unknown Error Has Occurred" pops up above the login via the web site.
I am writing this after much agony and travial via an obsolete instance of Windows Explorer running on Windows XP Home Premium on an old portable using a newly created Apple ID which does not appear to have the same problems logging into the support community. Can anyone out there help me?
I have gone to war with Comcast's "free" security enhancement software "Constant Guard" believing that it might be the source. This machine had it installed at one time and has had it completely removed, but... it still experiences the error when my wife's ID is used.
The issue may be related to the recently added requirement for secuity questions and recovery email addresses which I tried to address for her ID and inadvertently ran into conflict/problem with using certain other email addresses with her ID. Perhaps something is corrupted in the database for her ID, or related to problems with support for esoteric things like Microsoft's .NET enhancements which I have long been using on my computers, or possibly Constant Guard "started" the problem because it was probably running when account security data was being updated via the Apple web site? I tried to get information about what I thought was the "recovery email address" associated with her account and was told by Apple Web sites that it was "in use" as an apple ID and could not be used as her recovery address. When I called trying to confirm that this ID was "mine" I was able to provide one of two security clearance pieces of data, but not enough information to get the support person to straighten things out for me. I ended up creating "yet another" ID just to get clear of the mess.
I made a suggestion to one of the folks I spoke with that an improvement to the functionality of apple ID's would be to support "consolidation" of accounts so that if several different Apple devices had been registered with different ID's and they all belonged to the same user(s) that a "common ID" could be created.
I'm reluctant to post apple ID's in a public support forum, and would prefer to deal with this by private email. or phone.
Message was edited by: [email protected]

[email protected] wrote:
I'm reluctant to post apple ID's in a public support forum, and would prefer to deal with this by private email. or phone.
Then contact Apple directly.
This is a user to user technical support forum. No one here has access to manage Apple ID's other than their own.
There is no Apple presence here.

"A serious error has occurred" when exporting

Please help!!
i am going to export a 20mins video, but i try many times, when export till around 50%,
a window pop up and said " sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down"
i try both premiere and encoder, also can't.
Also, i try to change the read and write permission and even update the premiere, nothing can help.
i am using MAC
Processor 3.4 GHz Intel Core i7
Memory 16 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 675MX 1024 MB
Software OS X 10.8.3 (12D78)
Adobe Premiere Pro CC Version 7.2.2(33)
anyone can help?

Look for a gap in your timeline around the 7% mark.
Also check to see of there may be a problem clip or transition.

Cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"

cannot download apps to iPad since iOS 5.1 update. Get error message "An unexpected error has occurred"

Hi mike,
Seems like a frustrating problem! Try restarting your device, and trying again. If that doesn't work, in settings, under store, tap your apple id at the bottom of the page, and then sign out. Sign back in again, and try again.
Also, check you have enough remaining space on your iPad for the app you want to download, you can do this in settings, then general, then usage.
I also reccomend buying the app in iTunes on your computer, and then syncing it to your device.
Let me know how you get on, and I'll get back to you with further help if needed,
Nathan

"An error (1502) occurred during the action Open." when opening original .VSD files, but NOT copies!?

We have a weird situation we're trying to troubleshoot for quite a while: We have multiple .vsd files stored on our network in DFS shares.. We have multiple users who cannot open the files, when they try by navigating to the file and double-clicking it,
they get "An error (1502) occurred during the action Open. File not found"
However, if they copy and paste the file to the same exact network folder, THAT file they can open with no problem!
The problem is very bizarre. I've checked obvious things such as file/folder permissions, versions of Visio installed, things in common between people who can and can't open the files.. I even did some testing today with some strange results...
Windows 7 x64 machine with Visio 2010 Pro installed (x86):
1. Opened file by double-clicking it in explorer, "Got the 1502 error"
2. Tried it again, this time I just get "File not found"
3. Opened Vizio, did a File --> Open --> navigated to the file and opened it that way... 1502 error.
4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.
5. Closed the copy, tried to open the original, still get file not found / error 1502.
The file does exist, it IS there.. sometimes the user just copies it to their local desktop (well, it's not really local, it's redirected) and it opens fine there.. other users email themselves a copy of the file and then open it that way.. it works for
some, not for others.. and there's no discernible pattern yet to identify who this is affecting. Anyone have any ideas?
-Keith
-Keith Elkin

Hi,
Based on the error message, the issue may be caused by the Visio file is occupied by some other program in DFS.
>>4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.<< If you did this step, the Visio file would rename in the same folder, like file1.vsd. Thus, it opened well.
Thus, I recommend you check the file's status in computer management in DFS server, see the below image:
If the affected Visio files were occupied, please try to clean them(right click>close the file) to test.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Sorry,
This didn't help, the files are not open, locked open, and the issue still persists. Any other suggestions?
-Keith
-Keith Elkin

HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

Have been using Adobe CreatePDF for many months successfully.
Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
Tom.

I am still experiencing this problem. Customer service from Adobe has been abysmal!
I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
Note: This problem is happening always now, regardless of time being used.
Tom

App store error message "could not sign in" "an unknown error has occurred"

has anyone else gotten this message when trying to sign into the app store:
"could not sign in" "an unknown error has occurred"
i know my password is correct, i signed in on my macbook and on my imac and no issue there.
i called apple and they coulnd't figure out what it is, i reset my network settings and same thing. of course i can't do a restore because i'm at work and we don't have the new lighting cords here for me to hook up to my imac

I experienced this problem, too -- and with the help of an Apple support rep, figured out a way out.
Go into Settings and turn off automatic date and time, and set your phone back a year. Then go back and turn automating date and time back on, to get back to the present. Now go to Settings > iTunes & App Stores, click on your AppleID, and re-enter it and your password. Finally, go back to the App Store (or iTunes Store) and try to download what you had been trying before -- and if you're like me, it will now pop up with a new set of Terms and Conditions for you to approve. After you approve, you'll be able to download whatever you had been trying to.
It appeared, in my case, that Apple needed to present me with a new Terms & Conditions to approve, but for some reason, iOS 6 and the Apple mother ship weren't communicating correctly about how to do that, and I was stuck with the "Could Not Sign In" message. Changing the iPhone's time and/or re-signing in via Settings > iTunes & App Stores resolved the roadblock for some reason. Hope this works for others as well!

Error -23011 occurred at LabVIEW Analysis ODE Solver/inconsistency in dimensions of X(0), F and X!

Similar Messages

Maybe you are looking for