Fringe does not go away when zooming out

Hello,
I am using the following set up" Adobe lightroom v2.6, processing raw files from a pentax k10D
I have an image with a noticeable fringe green-yellow fringe between a red rock and a grey-blue sky.
To fix the fringe, I zoomed in to 1:1, and applied a chromatic abberation correction of blue/yellow +60.  This seemed to fix the problem when zoomed in at 1:1
However, when I pull back out to view the whole image fitted to the display screen (a 22" MAC screen), the fringe is again visible.  When I zoom in again, the fringe is momentarily visible at the magnified scale, and then disapears; it is as though the correction were being applied only when zooming is in effect.
I am concnered that when I try to print the image, the fringing will appear.
Can anyone recommend solutions to this issue?
With thanks,

This is normal. In the Develop module, Lightroom does not apply any of the pixel level edits (sharpening, noise reduction, CA correction) to the zoomed out view. It does this to not make you wait for 10 seconds every time you touch a slider to wait for the entire image to render, but it only quickly renders a low-resolution image. Since a computer screen is very low resolution this makes sense as it is very difficult (actually impossible) except in really extreme cases to accurately preview the effects of these sliders at such low resolution. If you switch back to Library, you will see that Lightroom will render a new jpeg preview where it will employ the corrections and there you should not see the fringe anymore even zoomed out, So don't worry, the print will not have the fringe as for printing (excet draft mode) it always renders the image completely from the RAW file taking all your settings into account.

Similar Messages

  • TS4036 the icloud backup "ok" message does not go away when I pouch it

    the icloud backup message does not go away when I touch the "ok". acting like it is freezed! please help

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Dv 6809wm laptop. Computer still does not boot up when battery out and ac adapter plugged in?

    dv 6809wm laptop. Computer still does not boot up when battery out and ac adapter plugged in?
    It lights up initially for a split second when I push power button, but does not continue to boot up. When ac adaptor is put in it glows blue like it is supposed to. Any suggestions?

    i'm going to try to see if a different ac adaptor will work hopefully that solves the issue.

  • "Charged" icon does not go away when 5th gen Ipod is disconnected

    When I unplug my Ipod from either the wall charger or computer USB cable, the Charged icon does not go away. After sitting idle, when it would normally go into sleep mode, the big green Charged icon displays on the center of the screen.
    This obviously prevents the battery meter from reading correctly, and I think it's causing the battery to die prematurely.
    I've tried restarting and updating the Ipod software. Any suggestions short of restoring??
    5th gen. Ipod Windows XP
      Windows XP  

    I am having the same problem!
    I had my ipod 5th gen docked to a iHome alarm clock, and after pressing the button on my remote to shut off the alarm the charged screen popped up a few seconds later (this is normal) however, the screen never went off, it is currently still showing the large charged battery symbol in the middle of the screen while being backlit.
    I have tried the 5R's and this does not help. Do i need to bring it in to be serviced? Did you resolve your issue?

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • Read Status does not apply correctly when working out of a shared mailbox.

    since updating to the Exchange 2010 SP3 RU4, users have been experiencing the same issues when working out of shared mailboxes. when user 1 opens an email or manually marks the email as read the status does not change from their perspective, the email remains
    unread. however, the other users viewing the shared mailbox immediately see the status change to read. User 1 has to re-sort his email from catagory to received or from ect. As soon as the emails are resorted the status changes. alternatively, if User 1 views
    another folder and returns back. the email is marked as read.
    This problem happens with Outlook 2007 and 2010
    This happens after re-creating the profile
    opening outlook with the switches /cleanprofile /cleanviews seems to solve the problem for an hour or so.
    I have run mailbox repairs on the server for the mailboxes in question.
    changing the behaviour in tools>options>reading pane> has no effect.

    Hi Brenn,
    To narrow down the issue, we need more investigation:
    1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
    2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
    3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
    4.Please switch to online mode for shared mailbox and test the issue.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Bugs: Delete icon does not go away when deleting about 10 emails or more at once

    I have the Sprint Blackberry Tour and am noticing some other bugs now as well.  It seems I cannot delete more than about 10 emails at a time without having the delete (clock icon) not go away.  I have to remove the battery in order for it to go away.  This in addition to the sound profile not remember my settings is annoying (there is another post on that..  Did they rush this phone out the door without proper testing? 
    Anyone else having problems with mass deleting emails?  

    a little update...
    When this problem occures, I'm usually looking in my 'Messages' folder that list all messages from each of my seperate email accounts on my device.
    The last time I had this problem when the icon would not go away, I went into each of my 3 email message folders seperately, and deleted all messages in each one. When I returned to my main 'Messages' folder from home screen, the 'Deleting' icon was gone.
    I'll post another update when/if I confirm this is a work around for the problem.
    Thanks,
    Kalen

  • Firefox freezes or does not go away when closed I need to use window task manager

    In Windows 7 Firefox often freezes or will not go away even if I close it.
    So far the only way to resolve this issues if it last is to close it with Windows Task Manager.
    Which obviously means that if I was frozen I loose any other tab that is open

    See http://kb.mozillazine.org/Firefox_hangs and [[Firefox hangs]] (Hang at exit)

  • Tiger's Preview application does not antialias images when zooming

    On windows when you double click an image and zoom in it uses standard bicubic interpolation to give the magnified image a natural look.
    In OS X, when images are magnified in Preview the pixels are magnified 1:1 which gives a horrible pixellated look. On some images clicking "actual size" gives a non 100% scale rendition too.
    Is there any hack or trick to let preview magnify images normally or better?
    It's weird, you'd think some uat tester would have noticed the pixellated zoom and just changed the magnification algorithm.

    In ~/Library/Preferences/com.apple.Preview.plist, there is an entry called
    Root->Preview->PVImageHiResDrawingInZoomInMode
    which is set to zero by default. Change it to 1, save and restart finder. This should enable interpolation. It seems to work OK but no promises - they must have turned it off for a reason (it's actually pretty rubbish compared to the windows one and for some reason not as good as the one used in slideshow mode?!).
    Message was edited by: chris_R

  • In IOS7 when u update app from Apple Store it does not go away like in IOS6.  I have a weeks worth of apps that I updated and are showing open in the upgrade section.

    When updating an app thru the  Apple Store in IOS7 it does not go away when updated like it did in IOS6.  I have a weeks worth up completed updates showing open when I go to the Apple Store.  How do we deleted these completed upgrades.

    Fixed this with apple care.  Had a unique situation.  Will share by email if interested.

  • Is there a way to increase the icon size (and the text below) without using zoom?  I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

    Is there a way to increase the icon size (and the text below) without using zoom in iOS 7?  I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

    Hello Apple.
    It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed?  (It's not with the Mac.). And for so long too.
    Do you employ people with actual accessibility problems to help you do UI design?
    I think too, that some buttons are too close for people who might have motor control problems.
    I love my iPad but I fear as I age, the iPad might not keep up with me.

  • I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

    I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

    The CC version will not activate with your perpetual CS6 license. Download the version from here:
    http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Your number should work with this version.

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    I posted this on another thread. See if this works:
    1) Uncheck "Backup previous version" in Keynote's Preferences.
    2) Make a duplicate copy of your file that has issues and save it.
    3) If you still get spinning wheels from switching between apps after editing or 10 seconds of inactivity, manually save with command+s. It may beach ball here but be patient and wait for it to finish! Try editing and resume doing work now.
    Command+s may be a bit slow but I think that might be normal since the files are so big.
    Good luck and let me know if this works.

  • WebI does not return failed when scheduling a report which only holds parti

    WebI does not return failed when scheduling a report which only holds partial results.
    We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
    When running the report manually, it works file.
    The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
    The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
    The version we have is BOXIR2-SP4.
    Ok. Issue identified.
    The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
    Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
    Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

    Hi ,
    Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
    This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
    Problem Statement:
         Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
    Recomended Solution:
        Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
    Thanks
    Salini

Maybe you are looking for

  • How to find u0091Where used list of BSP Applicationu0092?

    Hi, In standard, one BSP application is calling another BSP application by hard coded in application. I want find a where used list of a BSP application. How to find ‘Where used list of BSP Application’? Regards, ...Naddy

  • Time field in Flow Trace

    When you bring up the Flow Trace on a SOA composite instance, it displays information such as Instance ID, Type, Usage. One of the field is the Time field. Is processing start time or end time? The documentation says "... the time at which the compon

  • Online Adobe - Calling a web service

    Hi Gurus I am trying to update the data from Inter active Form(which is Online Adobe Form) to SAP Tables for that i created fucntional module and created web services. my problem is when i click on submit button( which is web services) i am getting a

  • Update the price from the po condition types to  so condition types

    hi, i need update the actual price from the Purchase order invoice price to the SO pricing .is there any Badi or EXit available to do that? its very urgent. thanks in advance regards, hpp

  • Using Resource Reference to JavaMail Session Resource

    Hi, Wondering whether someone can give me some helpful pointers to solve the following issue. I have a servlet app, which at some point needs to sent emails. In order to do so, I want to use a JNDI lookup to a JavaMail session resource. Here is a cod