TS4036 the icloud backup "ok" message does not go away when I pouch it

the icloud backup message does not go away when I touch the "ok". acting like it is freezed! please help

Perform a Reset...
Reset  ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Similar Messages

  • How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    How do I get rid of the iCloud Backup alert message?  I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset.  Thanks

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    I posted this on another thread. See if this works:
    1) Uncheck "Backup previous version" in Keynote's Preferences.
    2) Make a duplicate copy of your file that has issues and save it.
    3) If you still get spinning wheels from switching between apps after editing or 10 seconds of inactivity, manually save with command+s. It may beach ball here but be patient and wait for it to finish! Try editing and resume doing work now.
    Command+s may be a bit slow but I think that might be normal since the files are so big.
    Good luck and let me know if this works.

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • How do I set up my MBP so that a message does not pop up when the power button is pressed?

    When I press my power button on my retina a message that says "Are you sure you want to ..?"
    How do I set it up so that that message does not pop up?
    My friends keep turning off my computer..

    Tell your friends to leave your computer alone. That's not the proper way to turn off your MBP. And no, that message cannot be turned off. It is a safety feature.

  • The ICloud backup dialogue box won't go away and won't allow me to do anything on my phone, an I5

    The ICloud Backup dialogue box has come up on my I5.  It will not cancel, nor allow me to do anything on my phone, even power off.

    Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use it again

  • The new version of firefox does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

    Firefox automatically loaded a new version recently. The new version does not shut down when I close the browser it continues running in the background. In addition it opens Adobe Reader for a brief time and then that closes. Everything worked fine before this new version.

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * https://support.mozilla.com/kb/Firefox+hangs

  • Do Not Disconnect message does not go away!

    I just purchased my IPod Nano and every time I recharge it on my IBM Windows XP Pro, I get the message "Do Not Disconnect". When I try to eject from Itunes, I get an error message that tells me that "another application is using Itunes" and hence cannot eject. However, I do not have any application open. This "Do Not Disconnect" message doesn't go away even when my battery is fully charged. Can someone share some insight on how to make this problem go away?

    The answer could be as simple as you have your iPod enabled for disk use. If this option is switched on then the Do Not Disconnect will stay there until you manually eject your iPod.
    Connect your iPod and in iTunes go to Preferences>iPod. Under the Music tab see if your iPod set to automatically sync (automatically update songs and playlists) with iTunes and also has a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: Safely Disconnect IPod

  • "Charged" icon does not go away when 5th gen Ipod is disconnected

    When I unplug my Ipod from either the wall charger or computer USB cable, the Charged icon does not go away. After sitting idle, when it would normally go into sleep mode, the big green Charged icon displays on the center of the screen.
    This obviously prevents the battery meter from reading correctly, and I think it's causing the battery to die prematurely.
    I've tried restarting and updating the Ipod software. Any suggestions short of restoring??
    5th gen. Ipod Windows XP
      Windows XP  

    I am having the same problem!
    I had my ipod 5th gen docked to a iHome alarm clock, and after pressing the button on my remote to shut off the alarm the charged screen popped up a few seconds later (this is normal) however, the screen never went off, it is currently still showing the large charged battery symbol in the middle of the screen while being backlit.
    I have tried the 5R's and this does not help. Do i need to bring it in to be serviced? Did you resolve your issue?

  • IPad with retina is stuck on error message that iPad is unable to back up.  When hit ok, the message does not go away.  Cannot power down.  Don't have computer to sync with iTunes.  Now what?

    My coworker has a fairly new iPad with retina display.  She has an error message that the iPad has not been backed up and needs to back up when locked, on wifi, and connected to a power supply.  It has an ok button to acknowledge the message.  Every time she hits the ok button, the error message remains.  She is unable to power down because the error message stays at the top and disables the ability to use any other touch portions of the screen.  She tried using Siri to reboot, but Siri was of no help.  She just kept saying that she does not wear boots.  Holding the power button down for an extended period also did not help.  She does not have access to the computer that has her iTunes on it, so she cannot sync it via cable.  She also does not want to do a reset because she has several photos that she does not want to lose.  What can she do?

    Try holding the Home and Power keys at the same time for approx 10 seconds or until the Apple logo appears, this will 'reset' the device - it won't lose any data doing this, let us know how you get on.
    Regards,
    Steve

  • The search feature in messages does not seem to work with pre IOS 7 messages

    After updating to IOS 7 the search feature in the Messages app does not seem to work with messages received prior to the update.  Texts received since the IOS 7 update search correctly.  Is this a bug or a feature of moving to iMessages rather than just receiving standard texts?

    Although not related to your question you have outdated ShockWave Flash Player go ahead and update your flash player by going to www.get.adobe.com/flashplayer
    As for your problem, One of your add-ons might be the culprit too. Try running Firefox in [[Safe Mode]] with all add-ons disabled. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]

  • My iPad synchs my Outlook tasks via the iCloud, but my iPhone does not.

    Hi Everyone,
    I've updated my iPad and iPhone to iOS 5. I've also added the iCloud client to my Windows 7 machine running Outlook 2007.
    New tasks that are added into Outlook synch via the iCloud to my iPad, like I would expect. They appear in a 'Tasks' list within the Reminders app itself.
    However, on my iPhone which connects to the iCloud using the same Apple ID as my iPad, there are no Tasks! In fact, there isn't even an empty Tasks list (the tasks list was created on the iPad after the first synch).
    If I create a new Reminder (not a task) on my iPad, that synchs accross between iPad and iPhone via the cloud. It simply seems the Tasks are only eligable for synching between Outlook and iPads... not iPhones?
    Can anyone confirm this is expected behavior?

    Hi,
    i youse Outlook and Iphone 3gs and i can sync and it would be displayed in the notification center.
    But it would not displayed in the tasklist from outlook.

  • I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

    I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

    Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
    The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
    Briefly, you need to delete the following file:
    /var/audit/current
    If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
    Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
    When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
    mount -uw /
    You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
    Next, type the following command:
    rm -i /var/audit/current
    Press return. You should get the following output:
    remove /var/audit/current?
    If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
    Finally, enter the command:
    exit
    Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
    Credit for this solution to ASC user AnthonyTW.

  • Messaging does not accept photos when sent to me.

    I am not able to receive photos in messaging.  How do I get this feature back? 
    I also note that my camera icon is graded out.  But I was able to take a picture. 
    What dos the camera on the lock screen indicate, this is something I haven noticed before

    I installed the quicktime player but does not open the videos sent to me by e-mail
    know the solution?
    The first step is to determine if the files should be QT compatible. "Videos" come in many different audio, video, and file container formats. Which are these?

  • When I turn on my ipad2 the volume box appears and does not go away until i hit the volume button on the side and the increase volume button does not seem to funtion only the lower section does?

    I need help. I got an ipad 2 for Christmas and the volume box appears every time I turn it on and it won't go away until I hit the side volume button.  I also realized that the upper portion of the volume key does not seem to work properly.  Any solutions?

    i face totally similar problem so i think its a software flaw. but mine got on quite a long time.
    what should i do, i dun like going to the store in exchange for a refurb one

Maybe you are looking for

  • Credit Memo process in 3rd party order

    Hello All, Once 3rd party invoice is completed process as follows: (standard process) sale order --> Purchase Requisition --> Purchase Order --> Goods Receipt --> Invoice Verification --> Customer Invoice. When you post the customer invoice to accoun

  • Duplicate Tab for Firefox 7 alternative

    Not a question but an answer. This helped me so much that I'm hoping that someone who is looking for this info will find it as I did. I stumbled upon a thread where cor-el posted this simple alternative for "Duplicate Tab", an add on that does not wo

  • Updating BI Beans Catalog object

    I have created a Crosstab Bi Beans Object and loaded it into the Bibcat server using JDeveloper. However, after updating the OLAP cube that the object is based on, I opened up the Bi Beand Object but the new OLAP data does not show up. Is there a way

  • Expandable/Collapsible Summary to Detail in Answers Dashboards

    Is it possible to produce a report with summary rows preceeded with a plus-icon (+) having aggregate data which when clicked changes to a minus-icon (-) and expands in place to show the next level of detail? If not, what might be the closest alternat

  • Migrating email from osx tiger to Maeverick

    I just bought the latest Macbook pro running The Maeverick. The Migration assistant could not recognise my old mac book as the OS are incompatible. I am stuck with a whole load of emails from the old mac book that I need to transfer to the New Macboo