FRM-40202

I have a form in dev-6i. Form contains following fields with following order.
:CODE
:NAME
:DEPARTMENT
The required property of :department field is YES.
Now on :code field there is a post-change trigger with following code.
insert into a_tab values(:code);
commit;
due to insert command i used commit; but this commit; collapses with :department field's required property YES.
I want to insert the value and I want the same order while the required property of :department is YES.
How to do it?

Gul wrote:
I have a form in dev-6i. Form contains following fields with following order.
:CODE
:NAME
:DEPARTMENT
The required property of :department field is YES.
Now on :code field there is a post-change trigger with following code.
insert into a_tab values(:code);
commit;
due to insert command i used commit; but this commit; collapses with :department field's required property YES.
I want to insert the value and I want the same order while the required property of :department is YES.
How to do it?YOur COMMIT; also save the form entry. Is it okay ?
Can i suggest you another way ?
Write your code, i mean insert command at POST-INSERT trigger at block level, also work for you...
Hope this helps
Hamid
Mark correct/helpful to help others to get right answer(s).*

Similar Messages

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Can not delete the last record , frm-40202 field must be entered

hi ,
i have built a form which contain master and details blocks
the problem is
when i look for a record by executing query on on transaction serial and try to delete this record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
the question is :
why it gives a new serial when i delete the record ??if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-record
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;

Hi ayadsufyan,
As it looks Andreas assumption of internal status change was correct. So taking into account this fact I would assume you are doing some data manipulation on the row you are unable to delete.
What I would suggest to do is to put the following code in your KEY-DELREC trigger :
clear_message;
message(:system.record_status);pause;Now when you delete the record you should get the INSERT status of the record. If so it definitely means you are doing some manipulation on the record you are trying to delete. From this point on you will have to pinpoint the offending code.
Best regards.
Edited by: GregorM on May 11, 2013 10:41 AM

FRM-40202:field must be entered

In R12, under Service Contracts; when navigating between the two blocks 'FRM-40202' error is thrown indicating 'Field must be enetered'.
Duplication Instructions:
1) Create a new service contract with 2 usage lines and add 1 counter at subline level for each usage line.
2) Now place the cursor in the 1st usage line, navigate to Lines (tab) --> Pricing/Products (tab) --> below it shows the related subline information (counter instance).
Lines and Subline has parent-child relationship.
Lines is a parent block and Subline is a child block.
3) At subline level, we have three tabs (Effectivity, Pricing, Counters), but the data belongs to a single data block.
4) When the cursor focus is in Counters tab for the first usage line, then change the cursor focus to the next usage line at Line level; this navigation will clear the subline level details and it throws the error 'FRM-40202:field must be entered'.
5) Error is not shown when the cursor focus is in 'Effectivity' tab of subline and changing the cursor focus to next usage line at line level is successfull.
6) Counters tab has 1 field which is marked as 'Required' and when the error is thrown, it clears the current block and cursor focus remains in this field.
The same navigation in 11.5.10 instance doesn't cause any issues and there is no major code change from 11.5.10 to R12 for this navigation.
Please suggest on how to overcome the above situation.
Thanks
Edited by: user641733 on Aug 17, 2009 12:37 PM
Edited by: user641733 on Aug 17, 2009 12:37 PM

Well, I found the issue. I created a text field to display the passed parameter value (for debugging purposes) and by default it was defined as a database field. The error was due to the "txt_misc" field being part of the query but not existing in the database. I have since figured out how to get my parameter passing and data querying example to work.
New question:
Is there a way to debug more than one form at a time (step from one form into another called form)?
Last but not least, are there any Oracle Forms books that resemble the "Learn Visual Basic in 21 days" type format? I'd like a reference where I can look up sample syntax for a variety of tasks like ...
- calling a form
- passing parameters
- querying data
- SDI and MDI forms and their differences

Error when deleting a record: "FRM-40202 Field must be entered"

Dear all, please I need your help in this little problem.
I am using Forms 10g , and I am having an issue when deleting a record at runtime. It is giving "FRM-40202 Field must be entered".
I have reviewed the code but still cannot guess what could be the reason.
Any idea please. Thanks
Edited by: user562674 on 02/05/2011 12:35 ص

Hi
This error is caused due to the NOT NULL constraint u have in ur db for that item...
u have 2 options to use ...
1.Either u set the Required property of that item to > no
2.Or u give it an intial value...
To get ride of this error message...
Hope this helps...
Regards,
Ammatu Allah.

Stacked Canvas - FRM-40202

I having this problem with my form. I getting a FRM-40202 error when trying to run my
form which has two stacked and 1 content canvas.I have tried hiding the canvas.
hide_view('canvas150'); go_item('control_block.pwo_nbr');
AURUT is the content one.
canvas150 is the stacked canvas I don't want to see.
AWR is the stacked canvas i would like to see.
the data blocks are as followed:
reports
range1 and range 2 are associated with the canvas150.
range 3 and range 4 are associated with the AWR canvas.
The first problem I have is that the AURUT canvas has the canvas150 canvas on top of it
I tried deleted the canvas150 canvas and recreated it but it is still on top.of the content one and I also have a stacked canvas(canvas150) in my form.
I think that my form is corrupt. How can I fixed this problem without redoing the whole form? I tried created a contol_block and assigning the items to the control_block in my program unit. But I still see canvas150. I getting frm-40202 error. What I have read about this error is that a field in my canvas150 needs to be filled in before it will allowed me to continue to the next canvas(AWR). I don't even want to see canvas150 while I processing the items on AWR. I'm lost as to what i can do to fixed this problem. If I changed the field in question in canvas150 to "NOT REQUIRED" my form crashes.
I didn't have this problem with my first stacked canvas. Introducing my second stacked canvas has cause this problem.
Thanking in advanced

If I changed the field in question in canvas150 to "NOT REQUIRED" my form crashes.This should not happen. What happens when it crashes? Is there an error message when the crash occurs?

FRM-40202 and mandatory items on a multi-tab canvas

Hi all !
Short technical question for you guys : let's say that I have datablock whose fields are displayed on different tabs of a same tab canvas. Now, let's say that two fields of this datablock are defined as mandatory : one on the first tab, the other on the last.
My problem is that my form doesn't behave correctly :
Good behavior -> After creating a record on the first tab without filling the mandatory record of the last tab, if I try to create a new record => I get a FRM-40202 error, and Forms forces me to fill the mandatory field of the last tab. Nice.
Bad behavior -> After creating a record on the first tab, I try to go to the last tab by clicking the appropriate tag name in order to fill the mandadory field => I get a FRM-40202, and Forms leaves me on the first tab, unable to fill in my record properly. I thought that as long as I wasn't leaving my record, I wasn't supposed to get a FRM-40202 error...
How would you deal with this kind of error ? How can I get this kind of error while not leaving the record ?
Thanks for your ideas and your help
Regards,

Hi,
are you sure you're not navigating to another record or block? (or trying to save...) Make sure it enabling debugging messages or tracing it...
The error message in thiscase is clear...
Regards,
Jose L.

Non DB item in a base table block, gives frm-40202 error.

Dear All,
We are using forms6i as a front end. To simulate the error, consider the following example.
1.Create a multirecord emp block.
2.Add a non database item in the base table block.
3.Assign any value to the non database item, in the when new record instance trigger.
4.When i say F7 or F8, my block asking me like, field must be entered. Which means, my record status changed to Insert. But there is no change in base table record, since i modified only in the non base table item.
Please validate, whether i am doing anything wrong in my technique.
Regards,
Balaji

If you have a value to be used as the default value then you can use "Initial Value" property in the item level for the Non Database Item. If you do this it wont give you any problem during the query. If you create a new record then the value which you have put as the default will come automatically.

REJECT_CODE Vendor information and/or Operating Unit information is missing

hi
i am using Oracle Applications : 11.5.10.2.
i am trying to load suppliers and suppliers data into oracle AP.
i tried doing this with some sample data.
i executed the following code below :
insert into AP_SUPPLIERS_INT (VENDOR_INTERFACE_ID, VENDOR_NAME, SEGMENT1, STATUS)
values (*10006*,'XXX Financials2','199999','NEW');
i then ran the following process:
Supplier Open Interface Import
the supplier was added without errors
i then inserted a record into the
AP_SUPPLIER_SITES_INT table :
vendor_interface_id =*10006*,
LAST_UPDATE_DATE= SYSDATE,
LAST_UPDATED_BY          ='123',
VENDOR_SITE_CODE = 'true test' ,
CREATION_DATE     =SYSDATE ,
CREATED_BY     ='123' ,
PURCHASING_SITE_FLAG= 'N' ,
PAY_SITE_FLAG     = 'Y' ,
ATTENTION_AR_FLAG     = 'N' ,
ADDRESS_LINE1     ='gmmm df' ,
ADDRESS_LINE2     ='gmmm dfdv' ,
ADDRESS_LINE3     ='gmmm dfvdd' ,
ADDRESS_LINE4     ='gmmm dfvdd' ,
PAYMENT_METHOD_LOOKUP_CODE='Check' ,
TERMS_DATE_BASIS     ='Current' ,
ACCTS_PAY_CODE_COMBINATION_ID     = '1365' ,
PREPAY_CODE_COMBINATION_ID     = '1470' ,
PAYMENT_PRIORITY     = '99' ,
TERMS_ID= '10001' ,
INVOICE_AMOUNT_LIMIT =20,
PAY_DATE_BASIS_LOOKUP_CODE     = 'DISCOUNT' ,
ALWAYS_TAKE_DISC_FLAG= 'A' ,
INVOICE_CURRENCY_CODE     ='JMD' ,
PAYMENT_CURRENCY_CODE     ='JMD' ,
HOLD_ALL_PAYMENTS_FLAG='N' ,
HOLD_FUTURE_PAYMENTS_FLAG     ='N' ,
HOLD_UNMATCHED_INVOICES_FLAG= 'N' ,
EXCLUSIVE_PAYMENT_FLAG= 'N' ,
EXCLUDE_FREIGHT_FROM_DISCOUNT     = 'N' ,
ORG_ID= '142' ,
CREATE_DEBIT_MEMO_FLAG= 'N' ,
OFFSET_TAX_FLAG= 'N'
i then ran the following process:
Supplier Sites Open Interface Import
the process completes with a status of 'Normal'.
below is an extract of the output :
Supplier Sites Open Interface Import Execution Repor Page: 1
Import Options: All
Batch Size: 1000
Print Exceptions Only: No
Sites Open Interface Audit Report
Org Id Supplier Number Supplier Name Site Name
Total Sites Imported: 0
*** No Data Exists for this Report ***
Sites Open Interface Rejections Report
Org Id Supplier Number Supplier Name Site Name Reason
Total Sites Rejected: 0
when i checked the AP_SUPPLIER_SITES_INT table ,
the REJECT_CODE field has the value *'Vendor information and/or Operating Unit information is missing.'*
I THINK ALL THE REQUIRED FIELDS ARE POPULATED
why am i recieving this error ? is this caused by a bug? is there a required field that i didn't populated ?
please help me to solve this ....
thanks much!!

Hi,
Could you please check : Doc ID: 316368.1 of Metalink...
Symptoms_+
The Supplier Site Contacts Open Interface Import program is not importing certain contact
information.
The Supplier Site Contacts Open Interface Import Execution Report shows the following Rejection
Reason:
Vendor information and/or Operating Unit information is missing
Cause_+
The Last_name field is a required field.
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
Solution_+
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
If you test this out directly in the Suppliers window in Oracle Payables:
Navigation: Suppliers-Entry
Queried up a Supplier, then clicked into the Site field under the Contact tab.
Entered the contact information and omitted the Last Name, when trying to save the record,
the system gives the following message:
*'FRM-40202: Field must be entered' and the cursor is on the Last Name field. This is a required*
field and is the intended functionality.
Hope this will help
Regards,
S.P DASH

Locating Oracle Forms Error Messages File to Load into Table

I would like to create a procedure to suppress and replace Form errors and messages via ON-ERROR and ON-MESSAGE triggers.
Is there a file that I can load the ERROR Messages from using SQLLDR?
I have loaded the Oracle error file, $ORACLE_HOME/rdbms/mesg/oraus.msg as identified by Tom Kyte in the following link,
http://asktom.oracle.com/pls/ask/f?p=4950:8:13189517973890228983::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:558822941373
but it did not contain Forms Errors Messages such as:
FRM-40106: No navigable items in destination block.
FRM-40202: Field must be entered
FRM-40401: No changes to save
FRM-40405: No changes to apply
etc.
Any help in getting these error messages in a table, other than typing or copy/paste from Forms online help would be greatly appreciated.

kolipaka wrote:
Need to write control file to read .csv file for sql*load utility into oracle table.
Thanks
KLRWe're sorry that google is broken for you at this time.
Please try our alternative search site...
http://lmgtfy.com/?q=oracle+sql*loader+control+file+example
or
http://lmgtfy.com/?q=oracle+external+table+example

Problem with a primary key when creating a new record in Forms

My table has a field - MDD_KEY - that is a primary key. It is updated from a sequence with a before-insert database trigger. I know this works properly as the primary key was accurately populated when I inserted 1433 records.
In Forms 6, I have a form based on that table. I have set the mdd_key as a hidden field because I assume it will be entered by the before-insert trigger. However, when I enter data into the table, and then try to save it, I get a FRM-40202: Field must be entered. - followed by - FRM-40222: Disabled item MDD_KEY failed validation.
If I set DATA Required to no, when I try to save I get an FRM-40600: Record has already been inserted - but no such record exists in the database. I know this record is unique and does NOT exist because I deliberately made it up.
In the property palatte, the attributes of the field are:
DATA Data Type Number
Required Yes
DATABASE Database Item Yes
Primary Key Yes
Query Only No
Query Allowed Yes
Query Length 0
Insert Allowed Yes
Update Allowed Yes
Update Only if Null No
Lock Record No
I assume that my problem is that with a new record, the form wants to see the MDD_KEY populated before it saves - but that isn't going to happen until the before insert trigger fires in the database. I assume I have to populate that field within forms, but how do I do that without messing up the database trigger/sequence? I will have to load more data directly into the database - so I need the database trigger in place.
I have not used primary keys before so I am more than a little bit confused about how and when it should be populated when a new record is created in Forms.
Any help would be appreciated as I cannot enter new data into my form (works well with existing data).
Thanks
Glenn

hi
if u have any problem using seq then try that statemetn ur block level in ur form
PRE-INSERT trigger
select nvl(max(nvl(srno,0)),0)+1 into :srno from tablename;
Rizwan

Form is not working after table refresh

I've made a form and have added pre-insert trigger for the block. And the form is working perfectly fine with no issues.
Two new columns have been added to the table and have to be added to the form now.
I opened the data block wizard of the form and did a refresh of the table to get the two columns. After I pressed the "refresh" and then tried to run the form(but did not add new columns), the pre-insert trigger fails and starts throwing me an error that value has to be entered.(FRM:40202)
After further analysis I also found out that there was null value being passed into another item. Actually when I refresh the Datablock wizard I can see this column on the left hand side than being present on the right hand side.
Kindly if you could help on the same.

Hi Vidhya
pre-insert trigger fails and starts throwing me an error that value has to be entered.(FRM:40202)that's FRM-40202 (Field Must be entered)
pls make sure any new db column that's defined as NOT NULL in the table that u r trying to insert in is pre-insert has an insert statment.; must have a value.
the main issue here is ur table u r trying to insert in ; it has nothing to do with the form wizard's item on the left or the right hand side.
Hope this helps...
Regards,
Abdetu...

Navigation Problem in forms 10.1.2.0.2 !!!

Hi All,
when we create relation between master and child block then getting problem in navigation.
i assume that you have form with two block with relation and data then execute query then
start following step
0) make sure you set required = true for first navigation item of child block
1) you are in child block make some change on any item and make your cursor must not be on first navigation item.
3) commit the form
2) then click on master block and here make sure you are clicking on non current record.
From
Chirag Patel
From
Chirag Patel

Thanks Frank,
Yes Frank please follow the steps.
this is error explanation :
I have debug many times !!!
actually it is not error but funny behaviour !!
when you click on parent block on diffrent record then validataion trigger of first item of child block will fire. I do not why it is happening !!!
I removed the validation trigger and did required=true for first navaigation item of child block then also it's behaving funny.
This are the steps.
1) create form with parent and child block and make relation ship
2) insure that you put 2 record in parent and 2-2 recors in child for each parent record.
3) insure that your first navigation item of child block has required property = true
4) run your form fresh
5) from parent bloc execute query ( I hope child block is populate some records)
6) click on any record of child block and make changes
7) then commit your form.
now fun will start
8) click on parent block on any record which has child records and non current record.
9) then form should populate details for child instead of it behaves different as follows
you will find FRM-40202 : Field must be entered
your cussor will remian in child block;
your record will not change in parent block.
and child block will remail blank.
by debugging I found that problem is coming from this code of <Clear_All_Master_Details> procedure
-- Put cursor back where it started
IF :System.Cursor_Item <> startitm THEN
Go_Item(startitm);
Check_Package_Failure;
END IF;
when I remove this line
Go_Item(startitm);
then my problem is solved
But I do not know what is the other impact can be possible by removing this.
Hello Frank
I hope you will catch this error by this example.
From
Chirag Patel

Error "field required" in master-detail form with FORMS 10G!!

I have a Master-Detail Form.
When the cursor stay in detail block and i chage the master record with the mouse, clicking in scroll bar, i get error "field required".
In Forms 6i, works fine!!

Master block has more than one record displayed. When I click on any item in detail (except first one) and then click on different master record (return navigation to master block, but not current record) I have FRM-40202: Field must be entered on first item in detail block.
I found that reason is this part of clear_all_master_details procedure (automatically created by Oracle Forms):
IF :System.Cursor_Item <> startitm THEN
Go_Item(startitm);
Check_Package_Failure;
END IF;
Does any have same experience?
Is it Oracle bug or I am missing something?

Calendar forms10g: doesn't display, 'cause items are required in the record

in the record I have items with the required property set to yes.
I Display the Calendar on Key-ListVal and When-Mouse-DoubleClick triggers.
when the triggers are fired, oracle shows me the following error FRM 40202 Field must be entered. and I can't enter the date.
That's why the record loses the focus when the calendar shows up.
how I can keep my items with the required property set to yes, without having the frm 40202 error.
Steve

Instead of using a different block for the calendar, you could create a separate fmb and use CALL_FORM and a GLOBAL to show the calendar and intercat with it. This way, the record will not loose focus and you won't get the error.

FRM-40202

Similar Messages

Maybe you are looking for