FRM-40202 and mandatory items on a multi-tab canvas

Hi all !
Short technical question for you guys : let's say that I have datablock whose fields are displayed on different tabs of a same tab canvas. Now, let's say that two fields of this datablock are defined as mandatory : one on the first tab, the other on the last.
My problem is that my form doesn't behave correctly :
Good behavior -> After creating a record on the first tab without filling the mandatory record of the last tab, if I try to create a new record => I get a FRM-40202 error, and Forms forces me to fill the mandatory field of the last tab. Nice.
Bad behavior -> After creating a record on the first tab, I try to go to the last tab by clicking the appropriate tag name in order to fill the mandadory field => I get a FRM-40202, and Forms leaves me on the first tab, unable to fill in my record properly. I thought that as long as I wasn't leaving my record, I wasn't supposed to get a FRM-40202 error...
How would you deal with this kind of error ? How can I get this kind of error while not leaving the record ?
Thanks for your ideas and your help
Regards,

Hi,
are you sure you're not navigating to another record or block? (or trying to save...) Make sure it enabling debugging messages or tracing it...
The error message in thiscase is clear...
Regards,
Jose L.

Similar Messages

FRM-30041: Position of item places it off of canvas.

Hi All
I am using Oracle forms 10g.
I have developed a custom form First we had a single content canvas and three frame with master details block.
Now i have changed the detail block ie frame three to tab canvas and while running i have this error
FRM-30041: Position of item places it off of canvas.
I have a save button in frame three but now after changing this frame 3 as tab canvas i have this error.
Can any one pls guide me to come out this error
Thanks & Regards
Srikkanth

Hi,
Thanks for your response.
This form is already developed. And now the user need some slight changes, so i have made some modification.
There are three frames inside the one content canvas.Now the user wants to change the 3rd frame to tab canvas.And there is one save button inside the frame, So i dont want to keep this button inside the tab canvas, so i keep this save button outside the tab canvas.Eventhough i have change the third frame and moved inside to tab canvas and keep this button in content canvas but still same error is existing
can you pls guide me,if i commit any worng
Thanks & Regards
Srikkanth

Multi-Tab Canvas Navigational Controls

I want to control navigation out of a block displayed on a "tab" canvas to other "tabs" in a form containing multiple tab canvases. Are ther any "events triggers" associated with the "tab" level similar to the "WHEN_BUTTON_PRESSED" trigger such as "WHEN_TAB_SELECTED"?
I assume I must place the triggers on the block (or blocks) associated with the respective tabbed canvases.
null

The trigger must be placed at the form level. Use "if :system.cursor_block = 'BLK'"
to code for each tab.

Stacked and standard item groups

Hi,
Can anyone give a clue if the following problem can be solved?
I have a table with many columns which I want to display on a single form with multiple tab-canvases. And on each tab-canvas I want to use item groups (two side-by side!).
I managed to generate this only partly by using stacked item groups for each tab-canvas and item groups within these stacked item groups. But the item groups are all placed beneath each other! I can not find a way to control the layout-generation. It looks like the forms-generator does not use the tabulation preferences.
I am using Designer 6 (6.0.3.10) and Forms 6i (6.0.8.10).
Thanks.
null

It is not possible to get Service Item w/o delivery in to Invoice along with the the delivery item..unless the Service item is configured as item relevant to delivery.

Creating items on Tab canvas

I am creating text items on a Tab canvas.It allows me to put the items upto certain area only.If I put any item beyond while generating .fmx ,gives me error
FRM-30041 Position of item places it off of canvas.
However my canvas size is enough to accomadate.I am encountering this problem only with Tab canvas.With content canvas it is perfectly alright.
what is the problem and solution?
Appreciate help.Thanx.
null

Thanks randall.It worked.

Independent canvases into a multi-tab component

Hi!
I built eight individual dashboards which I now would like to assemble in one, maybe two multi-dashboards tab components. I realize I could export the excel page of each one but I would still have to build the dashboards one by one into the tab component multi-dashboard. Is there any way to directly copy the dashboards and "paste" them into the multi-tab component?
Thank you kindly!

Gunderic,
There is one more option to get this...
Export the 1st dashboard to swf.
In the new dashboard, use the image component and import the swf file into the tab.
Hope this helps...
-Anil

Multi-issue: both free and paid items?

Is it possible to make multi issue folio and publish both free and paid issues there? Thanks for the info!

Yes, you can have both free and retail issues in your Multi issue App. For retail issues, you need to have in-app purchases set up in iTunes connect as well.

Error when deleting a record: "FRM-40202 Field must be entered"

Dear all, please I need your help in this little problem.
I am using Forms 10g , and I am having an issue when deleting a record at runtime. It is giving "FRM-40202 Field must be entered".
I have reviewed the code but still cannot guess what could be the reason.
Any idea please. Thanks
Edited by: user562674 on 02/05/2011 12:35 ص

Hi
This error is caused due to the NOT NULL constraint u have in ur db for that item...
u have 2 options to use ...
1.Either u set the Required property of that item to > no
2.Or u give it an intial value...
To get ride of this error message...
Hope this helps...
Regards,
Ammatu Allah.

GL Custom Reports not displaying source and line item Data after Upgrade

Hi,
I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.
Thanks,
Arun

I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.Have you verified the queries of those reports after the upgrade? And, when you say upgrade, do you mean from 11i to R12?
Did you set the application context properly?
How to set the Organization Context in R12? [ID 437119.1]
Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
SQL Queries and Multi-Org Architecture in Release 12 [ID 462383.1]
Setting APPS Context is mandatory step while loading data using public APIs [ID 473615.1]
Thanks,
Hussein

Stacked Canvas - FRM-40202

I having this problem with my form. I getting a FRM-40202 error when trying to run my
form which has two stacked and 1 content canvas.I have tried hiding the canvas.
hide_view('canvas150'); go_item('control_block.pwo_nbr');
AURUT is the content one.
canvas150 is the stacked canvas I don't want to see.
AWR is the stacked canvas i would like to see.
the data blocks are as followed:
reports
range1 and range 2 are associated with the canvas150.
range 3 and range 4 are associated with the AWR canvas.
The first problem I have is that the AURUT canvas has the canvas150 canvas on top of it
I tried deleted the canvas150 canvas and recreated it but it is still on top.of the content one and I also have a stacked canvas(canvas150) in my form.
I think that my form is corrupt. How can I fixed this problem without redoing the whole form? I tried created a contol_block and assigning the items to the control_block in my program unit. But I still see canvas150. I getting frm-40202 error. What I have read about this error is that a field in my canvas150 needs to be filled in before it will allowed me to continue to the next canvas(AWR). I don't even want to see canvas150 while I processing the items on AWR. I'm lost as to what i can do to fixed this problem. If I changed the field in question in canvas150 to "NOT REQUIRED" my form crashes.
I didn't have this problem with my first stacked canvas. Introducing my second stacked canvas has cause this problem.
Thanking in advanced

If I changed the field in question in canvas150 to "NOT REQUIRED" my form crashes.This should not happen. What happens when it crashes? Is there an error message when the crash occurs?

Mandatory item validation at a page level?

Hi,
We have a page where the list of mandatory items changes according to how some 'key' items are set by the user e.g. if they select option 1 on item 1 we need a different set of mandatory fields than if they set option 2 - setting option 1 in item 4, may imply that some further items are mandatory, In addition, some items become mandatory due to circumstances known only on the database. We have in excess of 40 items on this page. Once all mandatory items are complete, the status of the page is saved as 'complete' - the user can always save the page as 'incomplete'.
We already have a database package that can check a table row to see if it is 'complete', it knows all the circumstances for when an items becomes mandatory and can produce a list of fields and the reasons why they have failed validation.
Is it possible to call this db package during page validation and use it to perform 'item' validations i.e. identify the invalid items and place the appropriate message inline with them?

Hi,
You can create a pl/sql page validation where you call you procedure.
begin
package_k.proc_p(item1,item2,...,itemN);
end;
You should define the type of the validation, but it is very straight forward,
Regards,
Max.

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Can not delete the last record , frm-40202 field must be entered

hi ,
i have built a form which contain master and details blocks
the problem is
when i look for a record by executing query on on transaction serial and try to delete this record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
the question is :
why it gives a new serial when i delete the record ??if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-record
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;

Hi ayadsufyan,
As it looks Andreas assumption of internal status change was correct. So taking into account this fact I would assume you are doing some data manipulation on the row you are unable to delete.
What I would suggest to do is to put the following code in your KEY-DELREC trigger :
clear_message;
message(:system.record_status);pause;Now when you delete the record you should get the INSERT status of the record. If so it definitely means you are doing some manipulation on the record you are trying to delete. From this point on you will have to pinpoint the offending code.
Best regards.
Edited by: GregorM on May 11, 2013 10:41 AM

[Forum FAQ] SharePoint 2013: Extracting values from a multi-value enabled lookup column and merge values to a multi-value enabled column

For some business requirements, users want to extract values from a multi-value enabled lookup column
and add items to another list based on each separate value. In contrast, others want to find duplicate values in the list and merge associated values to a multi-value enabled column and then
add items to another list based on the merged value. All of these can be achieved using SharePoint Designer 2013 Workflow.
How to extract values from a multi-value enabled lookup column and add items to another list based
on each separate value using SharePoint Designer 2013.
Important actions: Loop Shape; Utility Actions
Three scenarios
Things to note
Steps to create Workflow
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013.
Important actions: Call HTTP Web Service; Build Dictionary
Things to note
Steps to create Workflow
How to
extract values from a multi-value enabled lookup column and
add items to another list based on each separate value using SharePoint Designer 2013.
For example, they have three lists as below. They want to
extract values from the Destinations column
in Lookup2 and add items to Lookup3 based on each country and set Title to current item: ID.
Lookup1:
Title (Single line of text)
Lookup2:
Title (Single line of text), Destinations (Lookup; Get information from: Lookup1 in Title column).\
Lookup3:
Title (Single line of text), Country (Single line of text).
Important action
1. Loop Shape: SharePoint Designer 2013 support two types of loops: loop n times and loop with condition.
Loops must also conform to the following rules:
Loops must be within a stage, and stages cannot be within a loop.
Steps may be within a loop.
Loops may have only one entry and one exit point.
2. Utility Actions: It contains many actions, such as ‘Extract Substring from Index of String’ and ‘Find substring in String’.
Three scenarios
We need to loop through the string returned from the look up column and look for commas. There are three
scenarios:
1. No comma but string is non-empty so there is only one country.
2. At least one comma so there is at least two or more countries to loop.
3. In the loop we have consumed all the commas so we have found the last country.
Things to note
There are two things to note:
1. "Find string in string (output to Variable:index)" will return -1 if doesn't find
the searched for string.
2. In the opening statement "Set Variable: Countries to Current Item:Destinations" set the return
field as "Lookup Values, Comma Delimited".
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Destinations (Lookup; Get information from: Lookup1 in Title column).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup2.
Add conditions and actions:
Start the workflow automatically when an item is created.
Add item to Lookup2, then workflow will be started automatically and create multiple items to lookup3.
See the below in workflow History List:
How to merge values to a multi-value enabled column and add item to another list based on the
merged value using SharePoint Designer 2013
For example, they have three lists as below. They want to find duplicate values in the Title column in
Lookup3 and merge country column to a multi-value enabled column and then add item to lookup2 and set the Title to Current Item: Title.
Lookup1:
Title (Single line of text)
Lookup3:
Title (Single line of text), Country (Single line of text).
Lookup2:
Title (Single line of text), Test (Single line of text).
Important actions
"Call HTTP Web Service"
action: In SharePoint 2013 workflows, we can call a web service using a new action introduced in SharePoint 2013 named Call HTTP Web Service. This action
is flexible and allows you to make simple calls to a web service easily, or, if needed, you can create more complex calls using HTTP verbs as well as allowing you to add HTTP headers.
“Build Dictionary"
action:
The Dictionary variable type is a new variable type in the SharePoint 2013 Workflow.
The following are the three actions specifically designed for the Dictionary variable type: Build Dictionary, Count Items in a Dictionary and Get an Item from a Dictionary.
The "Call HTTP Web Service" workflow action would be useless without the new "Dictionary" workflow action.
Things to note
The
HTTP URI is set to https://sitename/_api/web/lists/GetByTitle('listname')/items?$orderby=Id%20desc and the HTTP method is set to “GET”. Then the list will be sort by Id in descending order.
Use Get
d/results(0)/Id form
Variable: ResponseContent (Output to
Variable: maxid) to get the Max ID.
Use Set
Variable: minid to Current List:ID to get the Min ID.
Use Copy from
Variable: destianation , starting at
1 (Output to
Variable: destianation) to remove the space.
Steps to create Workflow
Create a custom list named Lookup1.
Create a custom list named Lookup2, add column: Test (Single line of text).
Create a custom list named Lookup3, add column: Country (Single line of text).
Create a workflow associated to Lookup3.
Add a new "Build Dictionary" action
to define the http request header:
Add a Call HTTP Web Serviceaction, click on
this and paste your http request.
To associate the
RequestHeader variable, select the Call action property,
set the
RequestHeaders property to
RequestHeader:
In the Call action, click on
response and associate the response to a new
variable: ResponseContent (of type Dictionary).
After the Call action add Get item from Dictionary action to get the Max ID.
Add Set Workflow Variable action to get the Min ID.
Add Loop Shape (Loop with Condition) to get all the duplicate titles and integrate them to a string.
Create item in Lookup2.
The final Stage should look like this:
Start the workflow automatically when an item is created.
Add item to Lookup3, then workflow will be started automatically and create item to lookup2.
See the below in workflow History List:
References
SharePoint Designer 2013 - Extracting values from a multi-value enabled lookup column into a dictionary as separate items:
http://social.technet.microsoft.com/Forums/en-US/97d34468-1b53-4741-88b0-958472f8ca9a/sharepoint-designer-2013-extracting-values-from-a-multivalue-enabled-lookup-column-into-a
Workflow actions quick reference (SharePoint 2013 Workflow platform):
http://msdn.microsoft.com/en-us/library/jj164026.aspx
Understanding Dictionary actions in SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/jj554504.aspx
Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013:
http://msdn.microsoft.com/en-us/library/office/dn567558.aspx
Calling the SharePoint 2013 Rest API from a SharePoint Designer Workflow:
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/

GREAT info, but it may be helpful to note that when replacing a portion of the variable "Countries" with a whitespace character, you may cause the workflow to fail in a few specific cases (certain lookup fields will not accept this and will automatically
cancel). I only found this out when recreating your workflow on a similar, but much more complex list set.
To resolve this issue, I used another utility action (Extract Substring from Index of List) to clear out the whitespace. I configured it as "Copy from
Variable: Countries, starting at
1 (Output to Variable: Countries), which takes care of this issue in those few cases.
Otherwise, WOW! AWESOME JOB! Thanks! :)

Calendar Display on a Mandatory Item

Hi,
I want to display the demo calendar on a date field which is mandatory i.e., Required property is set to TRUE, also there are couple more items in the same record which are Mandatory as well.
My problem is when I press F9 for Calendar on the date field, it prompts me "Field must be entered", I came with alternate solution when the Required property is set to TRUE and value is NULL, I copy the SYSDATE to the current item before calling the calendar and when I press F9 it takes me to the next mandatory item in the record as the record validation fires.
Is there any way I can solve this problem?
Any help much appreciated.
Thanks in Advance,
Radha

Hi, This won't work even, as mentioned by Pedro even if we set the Defer Reqd. Enforcement property to YES, since there are couple more fields in the same record which are set to be Required TRUE. The reason behind this is the navigation is moved to a new block (Calendar block) hence Record level validation will fire and prompt to enter other required fields before displaying the calendar popup which are actually null.
Same holds good for IPSA solution, if we have just one Item in a record which is Mandatory then we can go with IPSA's solution.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Radha:
Hi,
I want to display the demo calendar on a date field which is mandatory i.e., Required property is set to TRUE, also there are couple more items in the same record which are Mandatory as well.
My problem is when I press F9 for Calendar on the date field, it prompts me "Field must be entered", I came with alternate solution when the Required property is set to TRUE and value is NULL, I copy the SYSDATE to the current item before calling the calendar and when I press F9 it takes me to the next mandatory item in the record as the record validation fires.
Is there any way I can solve this problem?
Any help much appreciated.
Thanks in Advance,
Radha<HR></BLOCKQUOTE>
null

FRM-40202 and mandatory items on a multi-tab canvas

Similar Messages

Maybe you are looking for