FRM-41344 - OLE object not defined for CONTROL_OLE in the current record

Hi!
I am working in a multirecord block, and I need to obtain data from a Weighing System on each record. But this error appears in run time: FRM-41344 - OLE object not defined for CONTROL_OLE in the current record.
I use the same in other program, but in that case is a single record block.
Can somebody help me?

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which is dedicated forum site
Regard
Helios

Similar Messages

ORA-23454: flavor not defined for object group "PUBLIC"."REPG" - HELP

Hi All,
Encountered the below error when trying to add the materialized views to the Materialized View Group in materialized view site:
1 BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'REPG',
4 sname => 'FMCHC',
5 oname => 'EMP',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8* END;
SQL> /
BEGIN
ERROR at line 1:
ORA-23454: flavor not defined for object group "PUBLIC"."REPG"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 452
ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 468
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5523
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
I have verified that the MASTER DEIFINATION SITE already have the group "REPG"
Pleae advise.
THANKS

I think you are going to have to provide Oracle version information before anyone will be able to help you with this question.

Class type not defined for this object type

Hi Friends,
Could u please guide me ?..We have a requirement to extract some data from classification system.
This is related with class type 023 - Batch
I want to use the following parameters in CTBW.
basis datasource :Z_BATCH_ATTR
class type : 023
object table :MCHA
Datasource type : ATTR
I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
The only way I'm being able to make this work is changing object table from MCHA to MCH1.
This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
Do you know what should I do to solve this?
Thanks in advance

Hi,
I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
As I'm trying to extract Batch attributes from "AUSP" Table.
I have given class type= 023
Obj Table= AUSP
But not sure which "basis datasource" I need to select.
Thanks,
Satish

Method not defined for object

Hello,
When I look into one of the standard tasks in my wf, this message appears:
"Method 'POPUPCONTABLE' is not defined for object type 'ZBUS2081'"
This problem happens in Test (Quality - QAS) environment, but not in Development (DEV). So I have activated and generated the object type in DEV and then generated again the whole wf, and included it all into a transport request.
After the requests were released and imported in QAS these modifications apparently did not take place, and the method is still unrecognized for that object.
How could I make sure that this change will be included in the requests? And, is this approach right (activating the object type)?
Appreciate your suggestions,
Best regards,
Ivson
Note: There are other/similar methods in that object type, in the same wf, that work ok.

Hi Ivson,
The transport system can be a bit flaky, though to be fair it can get quite complex. What it tries to do in the case of interdependent objects is to attempt activation of one thing, then reactivate the other and go back and reactivate any failed ones.
There are a few notes on OSS regarding transports and you'll see a few recommendations to simply retransport things if they failed. One way to minimize problems is to transport objects and code first, then workflows, then customizing.
As to delegation, you said 'other attributes work' so I assumed you'd delegated. What you should be doing is creating a delegation from BUS2081 to ZBUS2081. This is effectively the reverse of inheritance and makes all your additional components in the Z-object available as part of the BUS...-obj. In your workflows you should then ONLY work with BUS2081.
Cheers,
Mike

Exception '1250' is not defined for method 'CREATE' object type 'MESSAGE'

Dear experts,
I set up the document distribution (SWU3, backgroundjob SMTP, activated the workflows, flagged the linkages, etc). Now, I have still a error:
Exception '1250' is not defined for method 'CREATE' object type 'MESSAGE'
Does anyone know what the cause of exception 1250 could be?
Thanks in advance and kind regards,
Samuel

hi,
SAP ITS is SAP Internet Transaction Server which provides connection between SAP ERP system and html client.
Check with bassis, i think TCP/IP or work station application not configured yet. i guess?
Benakaraja
??P

Exception '1003' is not defined for method 'SENDTASKDESCRIPTION' object type 'SELFITEM'

Hi All,
Please help me in this. I am trying to send a mail when user rejected the item in his inbox. I am getting error like
Exception '1003' is not defined for method 'SENDTASKDESCRIPTION' object type 'SELFITEM'. I tried so many ways like no attachments,send express ,siganture,encryption all disabled but still the same error from user outbox who ever rejects it.
Regards,
Madhu.

Hi Madhu,
This exception is raised means you have checked the Signature check-box and encrypt check box.
Now you have unchecked that the issue should be solved , but if it is still giving the same exception synchronize your run time buffer using the t-code SWU_OBUF .
Let me know if the issue is still there.
Regards
Bikas

Method 'PROCESS' is not defined for object type 'BUS2081'

Hi All,
I am using a workflow for incoming invoice approval using WS20001004. I prepared one version for this. The standard business methos bus2081 i delegated to zbus2081. Here i placed one decision step for reject or approve. In the same task in inbox i can see the document i can see as attachment. Now the issue is after seeing the attachment when i click on task in my inbox it status is changed to red and i can not process it further.In log i can see the error like Method 'PROCESS' is not defined for object type 'BUS2081'. This method i do not have in standard or in delegated one. I was struck here. Pleas help in this.
Regards,
Madhu.

Hi,
"Here i placed one decision step for reject or approve." if your workitem is based on standard user decision step type of workflow, then the business object in underlying task should be 'DECISION' and method should be 'PROCESS'. I think in the task you have put your custom business object instead of business object 'DECISION'. This could be the reason you are facing error.
Regards,
Ibrahim

Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type

hi all
i made 4 workflows for MBO appraisal using APPR_DOC BO nd using std wfs- ws12300114, ws12300122, ws12300124 nd ws12300125. all r working properly in development server.
but
in quality all r giving errors related to evevts. as for example, for ws12300114 workflow it is giving error--
"Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type"
for all 4 wfs it is giving error like this related to event nd business object.
plzzzzzzzz anybody knows thn reply or call me at 09886999122 or mail at [email protected]
thanks in advance
Raj

Hi,
Since you are saying that the object worked fine in DEV and giving problem in Quality I feel that some sort of Your Dev work was not properly included in the Transport Request and was not gone to Quality server.
Something like EVENT activation, release status etc were not gone to Quality
check them.
reward if useful
regards,
Anji

"Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type 'APPR

hi all
i made 4 workflows for MBO appraisal using APPR_DOC BO nd using std wfs- ws12300114, ws12300122, ws12300124 nd ws12300125. all r working properly in development server.
but
in quality all r giving errors related to evevts. as for example, for ws12300114 workflow it is giving error--
"Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type 'APPR_DOC' "
for all 4 wfs it is giving error like this related to event nd business object.
plzzzzzzzz anybody knows thn reply or call me at 09886999122 or mail at [email protected]
thanks in advance
Raj

Hi,
Since you are saying that the object worked fine in DEV and giving problem in Quality I feel that some sort of Your Dev work was not properly included in the Transport Request and was not gone to Quality server.
Something like EVENT activation, release status etc were not gone to Quality
check them.
reward if useful
regards,
Anji

Class type 022 is not defined for object for BATMAS

Hi Experts,
while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
Business Object      BUS1001002
Method               SAVEREPLICA
Message Type         BATMAS
Basic Type           BATMAS03
Pleas guide how to resolve the error.
Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
Please guide on this also.
Regards.

Hello Jass,
Symptom
The BATMAS03 basis type (message type BATMAS) /FB BAPI_BATCH_REPLICATE cannot transfer any classification information. Please review note 1070634.
First Option :
You should first transfer the batmas and then the clfmas idoc.
Second Option :
You could create the batch together with classification. Normally the problem is the missing CUOBJ_BM in table MCH1. It is not necessary in all situations that the field have to be filled, but it can be in some cases (And it is better to store the right information in the corresponding fields). Especially when you transfer batch/classification information in other system the field have to be filled.
The way to create the batch TOGETHER with classification by using BATMAS IDOC is to set the following parameters correctly :-
set E1BPBATCHCTRL-DOCLASSIFY to X and fill the segments with relevant classification information
E1BP3060_ALLOCATION
E1BP3060_VALUATION_CHAR
E1BP3060_VALUATION_CURR
E1BP3060_VALUATION_NUM
In this case the field mch1-cuobj_bm should be filled with correct CUOBJ. You can also use function module BAPI_BATCH_SAVE_REPLICA to create batches together with classification.
Hope this information helps
Regards
Amber

Class type 022 is not defined for object for batmas in LSMW idoc

Hi Experts,
while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
Business Object BUS1001002
Method SAVEREPLICA
Message Type BATMAS
Basic Type BATMAS03
Pleas guide how to resolve the error.
Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
Please guide on this also.
Regards.

Hi,
Go to TCode OMCE and check the batch level.
If batch is activated at material/client level then use class type 023, if it is at plant level the class type 022.

VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,

i am learning SAP PP and i hv ides 4.7,
now WHEN SAVING ORDER i.e DURING COST CALCULATION I GET A MESSAGE THAT VERSION 0 IS NOT DEFINED FOR FISACL YEAR 2007,
ON ANALYSING IT LEADS TO T.CODE OKEV BUT HERE SYSTEM DOES NOT PERMIT TO CHANGE THE VERSION, BUT IN ECC 5.0 IT ALLOWS ,
WHAT IS THE PROBLEM, CAN ANY ONE PL. HELP ME,
analysis of error gives following message:
Activation of the indicator is not permitted
Message no. KT253
Diagnosis
You activated an indicator (Plan, Actual, WIP/results analysis or Variance calculation ) in the basic settings for version 1 in controlling area 1000. However, a higher order of settings (general version definition) prevents you from setting this indicator in version 1.
Note
The following should be taken into account when maintaining a version:
In general version definition you decide whether a version is allowed for
     Panning (with the Plan indicator)
     Actual data update (with the Actual indicator)
Note: In Overhead Cost Controlling, actual data is updated in operational version 0.
Actual versions different from 0 are found at present only for delta versions in Activity Based Costing (CO-ABC), and when you work with parallel assesment ( additional versions):
     A data version from results and WIP determination manages (indicator WIP)
     Another version from variance determination manages (indicator Variance)
     A version for exclusive use (field exclusive application)
You must maintain the version basic settings for each controlling area in which you want to update transaction data. General version definition restricts the settings possible for the controlling area:
     If general version definition does not allow plan and/or actual data update for version, this applies to the version in all controlling areas. If plan and/or actual data updating is allowed for a version in general definition, this can be reset for each controlling area separately (unmark the plan or actual indicator).
     Delta versions in ABC may not be used for parallel valuations in the actual; the same goes for versions with exclusive applications. In both cases, the valuation fields may not be maintained.
To set indicators WIP/Results- or Variance-determination the following conditions apply:
     Both indicators may be set only during setup for the controlling area, when they are already established in the higher level general version definition
     If either indicator is already active in the data bank, then the actual indicator may not be subsequently activated
     If the actual indicator is inactive and either of these indicators is active, then the valuations in the corresponding versions and in version "000" must agree
     If the actual indicator is active, then both indicators must be activated
Versions 0 and 1 are used regularly for various purposes by the system, which sets the following limitations/restrictions:
     Version 0 must always be available. It cannot be used exclusively. The plan and actual indicators must always be active.
     The actual indicator may not be activated in version 1.
If these conditions are violated during version maintenance, error messages are issued. There are three types of error message:
1. While maintaining the general version definition, you can only make changes if they do not violate the conditions outlined above.
2. While maintaining the basic settings in the controlling area, the entries must remain consistent with the higher level entries.
3. You want to maintain version 0 or 1. The restrictions outlined above apply.
Use the "Extras" menu option to display the structure of the entries in the complex data object version:
     Select a version and choose Extras -> Version use.
The SAP System shows which controlling areas use this version.
     Select Extras -> Versions in CO area
This displays all versions used in the current controlling area.
The subordinate entries in the hierarchy (settings for each fiscal year, strategic Activity-Based Costing: transactions for a delta versions) will also be shown for both cases.
Procedure
Do not activate the indicator, or change the higher order of settings in the general version definition.

Raj,
What are you trying to change?
To me you are not suppose to make any changes, you need to select the version "0" and then hit "Settings for each Fiscal year" subfolder.... here you copy the settings of 2006 and change the year to 2007. This should resolve the problem.
Regards,
Prasobh

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

Error Message: BP300 No superior budget object is defined for 110/1000001

Hi,
I am setting up Budget Structure and encountered error message - Message no. BP300 - "No superior budget object is defined for 1010 / 1000001".
The environment is Former Budgeting with Year-Dependent Commitment Items and Funds Centers.
Please help us to resolve this issue
Regards
K.Gunasekar

Hi K.Gunasekar,
Please check the following note that will help to fix this error:
106899 Guideline: Structural change of master data in FM.
This note usually guides to resolve the error BP300.
Best Regards,
Vanessa.

FRM-41344 - OLE object not defined for CONTROL_OLE in the current record

Similar Messages

Maybe you are looking for