FRM-41830 Error when try to select Billing address for customer...

Hi All,
When I tried to select billing address in Customer and Contracts Details for a particular project, I get error FRM-41830 - List of values contains no entries.
But in actual the customer has addresses.
Can anyone please tell me what kind of setup do I need to do.
Regards,
Bala

Dear Bala,
Prerequisites for a Customer to get populated into Projects:
1) Project Type > Contract
2) Project/Template Status > Active/Approved
3) Project Start Date and Customer Active Dates need to be checked.
4) Customer Status > Active
5) Customer need to be assigined to OU
6) Contact Details > Bill to & Ship To.....etc
Regards
Raghavender K

Similar Messages

FRM-41830 error when opening zoom form

Hi All,
I am facing a strange issue.
We are using ZOOM functionality. Now I need to make some changes to the existing CUSTOM.pll file. The CUSTOM.pll is in our $CUSTOM_TOP/resource. The CUSTOM.plx file is placed in $AU_TOP/resource. I have taken backup of the CUSTOM.pll and plx file. I have made the changes and compiled in Middle tier from $AU_TOP/resource path.
Once I open the application and click on ZOOM button, I am receving FRM-41830 error. Once I click ok, the ZOOM form is opened and could see the LOV details and the subsequent process is working fine.
To test, I have replaced the backup CUSTOM.plx file and the issue is not reinstated.
There is CUSTOM.pll file in $AU_TOP/resource, but it is a seeded copy and do not contain any of our custom logic.
I am confident that the .pll file in $CUSTOM_TOP is the source.
As another test, I have renamed the CUSTOM.pll in $AU_TOP/resource and tried compiling. I received the below error :*PDE-PLI018 Could not find library CUSTOM*. Once I undo the renaming, the compilation was successfull. Does it mean that Custom.pll in $AU_TOP/resource is being mapped?
Command used is:
f60gen Module=$CUSTOM_TOP/resource/CUSTOM.pll Userid=APPS/xxxx Output_File=$AU_TOP/resource/CUSTOM.plx Module_Type=LIBRARY compile_all=special
Can anyone help me in resolving the issue.
Thank You
Sateesh
Edited by: user11083692 on Aug 5, 2009 12:40 AM

FRM-41830 error is "List of values contains no entries" - what changes have been made to CUSTOM.pll ?
HTH
Srini

Error when generating the selection screen "1000" for Report ztest

Hi Experts,
I am getting this strange error while trying to activate my report. I simply copy paste report from my other system to new system it was working fine there. I also created all include program etc.
While I am trying to create "Selection-text" it is giving message that "Program contain some serious syntax error" while checking syntax saying that "Program is syntactically right".
Any idea how to solve this???
Regards,
Gourav

Here is the code::::
SELECTION-SCREEN BEGIN OF BLOCK select WITH FRAME TITLE text-sl1.
Component
SELECT-OPTIONS:
       s_xcide            FOR gw_zsmmess_compo-xcide
                          NO INTERVALS
                          MATCHCODE OBJECT zsm_xcide_oi.
SELECTION-SCREEN END OF BLOCK select.
SELECTION-SCREEN BEGIN OF BLOCK prcopt WITH FRAME TITLE text-sl2.
Default severity code
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-dsc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dfsevc   LIKE gw_zsmglob_sever-sevco
                       OBLIGATORY
                       MATCHCODE OBJECT zsm_sevco
                       DEFAULT '3'.
SELECTION-SCREEN COMMENT 37(30) pt_sevtx.
SELECTION-SCREEN END OF LINE.
Minutes to wait before re-issuing alert
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-ria.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_aleexp(3) TYPE n
                        OBLIGATORY
                        DEFAULT '45'.
SELECTION-SCREEN COMMENT 37(10) text-min.
SELECTION-SCREEN END OF LINE.
Use component specific parameters Yes/No
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-cpu.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_usecsp   RADIOBUTTON GROUP rg1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rby    FOR FIELD p_usecsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnucsp   RADIOBUTTON GROUP rg1.
SELECTION-SCREEN COMMENT 35(10) text-rbn    FOR FIELD p_dnucsp.
SELECTION-SCREEN END OF LINE.
Create/update component specific parameters automatically
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-cpc.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_updcsp   RADIOBUTTON GROUP rg2.
SELECTION-SCREEN COMMENT 35(10) text-rby    FOR FIELD p_updcsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
PARAMETERS: p_dnccsp   RADIOBUTTON GROUP rg2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(10) text-rbn    FOR FIELD p_dnccsp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-afo.
SELECTION-SCREEN POSITION 33.
Fire one alert per component/error type combination
PARAMETERS: p_afrerr   RADIOBUTTON GROUP rg3 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(50) text-afe    FOR FIELD p_afrerr.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per component (= outbound XI interface)
PARAMETERS: p_afrcom   RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afc    FOR FIELD p_afrcom.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Fire one alert per run
PARAMETERS: p_afrrun   RADIOBUTTON GROUP rg3.
SELECTION-SCREEN COMMENT 35(50) text-afr    FOR FIELD p_afrrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-sel.
SELECTION-SCREEN POSITION 33.
Select messages since last run
PARAMETERS: p_lstrun   RADIOBUTTON GROUP rg4 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(40) text-slr    FOR FIELD p_lstrun.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Select messages in selected interval
PARAMETERS: p_mintvl   RADIOBUTTON GROUP rg4.
SELECTION-SCREEN COMMENT 35(40) text-sin    FOR FIELD p_mintvl.
SELECTION-SCREEN END OF LINE.
Message selection interval
SELECTION-SCREEN BEGIN OF BLOCK msgfilt WITH FRAME TITLE text-msf.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-icr.
SELECTION-SCREEN COMMENT 14(05) text-ifr.
SELECTION-SCREEN COMMENT 25(05) text-dat       FOR FIELD p_stadat.
Select messages - start date
PARAMETERS: p_stadat   TYPE d.
SELECTION-SCREEN COMMENT 46(05) text-tim       FOR FIELD p_statim.
Select messages - start time
PARAMETERS: p_statim   TYPE t.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 14(05) text-ito.
SELECTION-SCREEN COMMENT 25(05) text-dat       FOR FIELD p_enddat.
Select messages - end date
PARAMETERS: p_enddat   TYPE d                  DEFAULT sy-datum.
SELECTION-SCREEN COMMENT 46(05) text-tim       FOR FIELD p_endtim.
Select messages - end time
PARAMETERS: p_endtim   TYPE t                  DEFAULT sy-timlo.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK msgfilt.
SELECTION-SCREEN END OF BLOCK prcopt.
SELECTION-SCREEN BEGIN OF BLOCK testopt WITH FRAME TITLE text-tso.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-tst.
SELECTION-SCREEN POSITION 33.
List only, no updates
PARAMETERS: p_lstonl    RADIOBUTTON GROUP rg5 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 35(14) text-tsl       FOR FIELD p_lstonl.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 33.
Execute updates
PARAMETERS: p_update    RADIOBUTTON GROUP rg5.
SELECTION-SCREEN COMMENT 35(14) text-tsu       FOR FIELD p_update.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK testopt.
*eject
INITIALIZATION.

PO Form- Terms- FOB Giving FRM-41830 error

Release R:12.1.3
In Purchase Order Form.
After giving the details in the header and lines,Clicked on the Terms Button.
When trying to Select the value for FOB.
Giving Error FRM-41830.
Values have been defined in the look up of the Receivables in OM.
Please suggest the solution.
Regards
Srini

Hi Tarun,
Thanks for the update.
I defined the Lookup---->FOB.
Application : Purchasing.
Still not able to get the details.
Regards
Srini

FRM-40501 Error When Attempting To Change Check Box Value

I am getting a FRM-40501 error when attempting to update/change a check box value. There are a few factors in my form setup that could be the problem, I will list them below:
My initial problem was that my INSERT statement would not trigger to fire (based on an IF statement) when my check box value was not initially set to the value of 'Y', even though the initial value was set to 'Y' in the property palette (value when checked was set to 'Y' and value when unchecked was set to 'N'). So, to remedy this I placed a specific literal select of 'Y' and aliased it back to the name of my check box name in the data block query, like: SELECT 'Y' CB_SELECT_SCHOOL FROM user_schools. Then I changed the check box to a database item (value to Yes when it was No before my "SQL select cheat" in the data block query). This made the initial value 'Y' and satisfied my IF statement before my INSERT statement in my trigger. However, now I can not update the check box item.
Does anyone know a better way to satisfy the initial value of my check box to 'Y', even though in the initial value parameter for my checkbox is set to 'Y' and forms is not really setting the initial value (when the check box is not set to a database item)?
Thanks in advance.
Kyle

I have fixed my issue.
I have reverted the check box to not be a database item, removed the "SQL cheat" of selecting 'Y' aliasing my checkbox name in the datablock SQL, and changed the initial value of 'N' in the check box property palette. This will force a change by the user making the check box value of 'Y', satifying my insert when-button-pressed trigger to fire and update the selected row.

FRM-92102 error when accessing Forms and Peoplesoft simultaneously

We are receiving an FRM-92102 error when we access Peoplesoft and then our web forms application simultaneously.
Here is the error message:
Java Plug-in 1.6.0_11
Using JRE version 1.6.0_11 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\SICARDT
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
RegisterWebUtil - Loading WebUtil Version 10.1.2.3
Loaded image: http://gdocdev.ic.gc.ca/gdoc/images/gdoc.gif
Loaded image: http://gdocdev.ic.gc.ca/gdoc/images/gdoc.gif
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Reconnecting (try 1 of 5)...
Reconnecting (try 2 of 5)...
Reconnecting (try 3 of 5)...
Reconnecting (try 4 of 5)...
Reconnecting (try 5 of 5)...
oracle.forms.net.ConnectionException: 500
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.HTTPConnection.connect(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
     at oracle.forms.engine.Runform.initConnection(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Can you provide more information? For example:
1. Does one or both apps use SSO?
2. Does one or both apps use SSL?
3. Are both apps being called from the same browser session? Remember that just because you may have two browser windows open does NOT mean they are running as separate sessions. If you started the second browser using java script, CTRL+N, or a URL shortcut, then they are likely same session.
This error suggest that there is a critical tcp/ip failure:
oracle.forms.net.ConnectionException: 500+
If the browser to run Forms and PS is the same session, there is likely a session ID conflict. Try opening one browser using the shortcut created for the browser (usually found on the desktop). Do not use a shortcut which contains an embedded URL. Open one of the apps. Then, do the same again to start the second app. If possible, run one app from IE and the other from Firefox (or other browser).

MBP "System Profile" error when try read "Logs" and long time blue screen

MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again!

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

Error when generating the selection screen '0005'of report 'XYZ'

Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
Saurabh

If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob

Error when Generating the Selection Screen?

Hi Guys,
               When i am executing the program with this code .I am getting this type of Error
" Source code   ZUSFICOR00013_MM_ACNT_COSTING                Line     0
Error when generating the selection screen "1000" of report
             I got this Error while activating my program.The code which i wrote is the below one.
SELECTION-SCREEN: BEGIN OF LINE.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN COMMENT 2(10) TEXT-004 for field s_matnr.
SELECTION-SCREEN: END OF LINE.
Thanks,
Gopi.

Hi Seshu,
              While doing EPC for the Below code
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(15) TEXT-004 for field s_matnr.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN: END OF LINE.
              I am getting an Warning like " Selection text or parameter for selection field S_MATNR is not maintained" How to coorect this one?
               and also for the this Below Code
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'BWKEY'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Plant'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'MAKTX'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material Description'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
                 I am getting EPC Error like " Char. strings w/o text elements will not be translated:
'Plant'"
     Can u please tell me How to correct these type of EPC Error's.
Thanks,
Gopi.

Designer Workflow SharePoint 2013 error when try to assign a task forbidden

designer Workflow SharePoint 2013 error when try to assign a task
Next attempt scheduled in less than one minute. Details of last request: HTTP Forbidden to http://oursite/_vti_bin/client.svc/web/lists/getbyid(guid'3cd5739e-f243-4b75-a724-fdbee704913f')/ContentTypes
Correlation Id: 56baaedd-a2d1-4377-9277-89d20cbdf434
and then after cancel I get
RequestorId: da9fe991-f8d5-7f4a-7dc2-fec198a2a115. Details: System.ApplicationException: HTTP 403 {"x-ms-diagnostics":["30000000; reason=SSL is required"],"SPRequestGuid":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"request-id":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["151"],"SPIisLatency":["0"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Wed, 15 Jan 2014 17:49:27 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-Powered-By":["ASP.NET"]} at
Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the error occurred when you assigned a task.
Did you install any CU for SharePoint?
If yes, after an update has been performed, several Windows PowerShell cmdlets must be run in order to maintain the connection between the SharePoint Server 2013 farm and the Workflow Manager farm.
$credential = [System.Net.CredentialCache]::DefaultNetworkCredentials
$site = Get-SPSite(<siteUri>)
$proxy = Get-SPWorkflowServiceApplicationProxy
$svcAddress = $proxy.GetWorkflowServiceAddress($site)
Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credential $credential -Force $true
After running the command, re-register the workflow service to see if the issue still occurs.
Register-SPWorkflowService: http://technet.microsoft.com/en-us/library/jj663115.aspx
More information are provided in the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Get "network error" when try to view Disney channels on Apple TV

I get "network error" when try to view Disney channels on Apple TV. Tried restarting Apple tv and restarting my airport.

Thank you for your feedback

FRM-41830 Error when try to select Billing address for customer...

Similar Messages

Maybe you are looking for