FRM-92101 HIDE_WINDOW when navigation

Hello,
This error can not always be reproduced >>>
You must navigate quickly between a
BlockA/WindowA to a BlockB/WindowB
and do a HIDE_WINDOW after leaving BlockA.
We are using
iAS 10.1.2.0.2 Solaris 5.9 sparc
go_block('BLOCKB');
hide_window('WINDOWA'); -- Window from Block A
crashes with FRM-92101if the :SYSTEM.EVENT_WINDOW is still WindowA !
Workaround:
go_block('BLOCKB');
synchronize; -- does not always help
if :SYSTEM.EVENT_WINDOW != 'WINDOWA' then
Hide_Window('WINDOWA')
end if;
What does that mean that the active cursor is not in BlockB ?
Or that the Window Handling has a timing problem ?
thx for any help.

I recommend double-checking all of the configuration changes you made to ensure there are no typo's and all of the required libraries are referenced. For example, I've see where people have removed the frmall.jar assignment to the archive variable in the formsweb.cfg (archive=frmall.jar).
Craig...

Similar Messages

  • Frm-92101 happens when I open a form from another form and close it.

    Frm-92101 happens when I open a form from another form, check something, show a message to the user and exit the form to the previous form.
    Forms version: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6
    When I put before the "EXIT_FORM" two messages, everything is fine and the second form is closed and I repeat to the first form just as I wanted.
    In forms 9.0 it didn't happen.
    Does it have a connection with the fact I use JRE instead of JInitiator?
    Thank you.

    >
    There are numerous causes of the FRM-92101 error. I recommend you start your investigation by tracing your Forms session so you can see what your form is doing when the error occurs. Check out My Oracle Support document How to Use Forms Trace with Forms [ID 209372.1] for information on how to enable the trace. Also, take a look at My Oracle Support document Known Causes of FRM-92101 Error In Forms [ID 604633.1].
    Hope this helps,
    Craig
    >
    I have just found that there is a "Synchronize" command in one of the main attached libraries, and when I comment that command the application works well. But I don't want to comment it because it's a great library and I assume it has a part in the system.
    I have discovered that in the new Forms' help, the fact that the System.Current_Item mustn't be null so the command "Synchronize" will work, is mentioned. In the old Forms' help, that fact is not mentioned.
    So I tried to put it inside a condition that checks if the current item is not null, but the compiler doesn't recognize the "current_item". I don't know why. Because it's a library? So how can I check this? I can sent it as a parameter, but I don't want. Do you know something about it? Thank you.

  • FRM-92101 Error when trying to access forms in R12 in windows 2003 SP1

    Hi,
    We have installed the Oracle Applications system on one of our instance.
    When we try to start the application we face some problem:
    The syndrome is the following:
    We are launching one of the Apps Forms Page
    However, we have to wait around 8-10 minutes till we got the error
    FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
    Details...
    Java Exception:
    oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process
    at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
    at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
    at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
    at oracle.forms.net.HTTPNStream.flush(Unknown Source)
    at java.io.DataOutputStream.flush(Unknown Source)
    at oracle.forms.net.HTTPConnection.connect(Unknown Source)
    at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
    at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
    at oracle.forms.engine.Runform.initConnection(Unknown Source)
    at oracle.forms.engine.Runform.startRunform(Unknown Source)
    at oracle.forms.engine.Main.createRunform(Unknown Source)
    at oracle.forms.engine.Main.start(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)"
    The OS in Windows 2003 with SP1

    We are launching one of the Apps Forms Page What is the form name? What is the navigation of the form?
    Did you try to regenerate the form via adadmin? If not, please do so and check then.

  • FRM-92101 error when changing the passwd when running Forms 10g application

    Hi Friends,
    Issue is with: Getting FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
    Steps i followed.
    1. Start th OC4J instance of the oracle 10g.
    2. Login with one user/passward and opens Forms 10g application
    3. By Using One Form, changed the passward of the current user.
    4. then closed the Form and then try to close the Forms Application.At this stage i got an error message FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
    I verified the log files but i did not get any relevent information
    Please help in this scenario.
    Regards
    Madhava Rayalu

    Could you paste the complete error message?
    Does this works fine when you change the username /passwd for other users ?
    Rajesh Alex

  • FRM-92101 error,when i update the PLL file.

    when i update the pll file,the form of called the pll wasn't open,FRM-92101 error.
    i must recompile the form, then it can open.
    why ? how can i resolve this problem?

    Hi,
    I think that this has to do with the PLL signature. If you only update the content of an existing pll file then this should go without. If you change the signature (e.g. method arguments or method number) then this has an impact to the internal structure,
    Frank

  • FRM-92101 when creating excel file through webutil

    I am getting forms error FRM-92101 error when loading a large amount of records into an excel file using webutil
    FRM-92101
    A Network Error has occurred
    The forms client has attempted to reconnect to the server 1 time(s) without success
    I can successfully create the excel file without the the FRM-92101 when loading only 100 out of 2,000 records from the datablock.
    But if I try to load 1,000 out of the 2,000 records then in the middle of the loading process I get the FRM-92101 error.
    What is causing this error? A timeout issue with forms? How much the excel file can actually handle? Could it be an security issue on the network?
    What can be done to remedy the problem? Just save data little bits at a time?
    Thanks,
    Michelle

    I was running the form from my DS and when I put the form on the application server there were no FRM-92101 errors.
    I'm not sure why running the form from my DS caused this error and running the form from the application server didn't?
    Thanks,
    Michelle

  • FRM-92101 when trying to run forms from Forms Builder 10g

    I have been struggling with this for a few days now and have tried multiple solutions around on these forums without any resolution yet!
    Trying to run Forms Builder on a Windows XP machine with Oracle Development Suite 10.1.2.0.2 installed in its own ORACLE_HOME. The installation completes succesfully and I can start the OC4J instance.
    1) When I open up Forms Builder and pull up the test.fmb form and try to run it, I get the following error:
    FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
    On clicking 'Details' the following errors are displayed:
    Java Exception:
    oracle.forms.netConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
    2) The ORACLE_HOME\j2ee\DevSuite\application-deployments\forms\application.log includes the following errors:
    11/11/25 10:02:23 formsweb: RunformProcess.connect(): failed !
    11/11/25 10:02:23 formsweb: Forms session <1> aborted: unable to communicate with runtime process.
    11/11/25 10:02:23 formsweb: Forms session <1> exception stack trace:
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
         at java.net.Socket.connect(Socket.java:452)
         at java.net.Socket.connect(Socket.java:402)
         at java.net.Socket.<init>(Socket.java:309)
         at java.net.Socket.<init>(Socket.java:153)
         at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
         at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
         at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
         at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    3) The Java console has the following error:
    oracle.forms.net.ConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
         at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
         at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
         at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
         at oracle.forms.net.HTTPNStream.flush(Unknown Source)
         at java.io.DataOutputStream.flush(Unknown Source)
         at oracle.forms.net.HTTPConnection.connect(Unknown Source)
         at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
         at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
         at oracle.forms.engine.Runform.initConnection(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class
    Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class with no proxy
    Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties
    Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties with no proxy
    Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class
    Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class with no proxy
    Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties
    Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties with no proxy
    Any inputs will be greatly appreciated.

    Same issue here... Been trying to get this working since a week now. I tried all the solutions like memory heap and all but no luck.
    One thing that I would like to know is that, in some threads the resolution was to recompile the INS_FORMS.MK file under /forms/lib32 but with my installation I don't have that "lib32" folder under /forms/ and I can not even find that file anywhere in my entire installation.
    I am using 12.1.1 on Windows Server 2008.
    Any help or guidelines is greatly appreciated.
    Santhosh.

  • FRM-92101 when openning a particular form

    Hello,
    When opening a particular form, users are encountering the error message:
    FRM-92101: There was a failure in the forms server during startup. This could happen due to invalid configuration
    We have many more forms in the application. Those are working fine.
    Details:
    OAS is 10.1.2.0.2 on windows 2003 server
    Database 10.2
    Could you please have a look on the issue.
    Regards,
    murali

    Hi,
    If you have access to metalink I recommend you this note :
    [url https://support.oracle.com/CSP/main/article?cmd=show&id=189867.1&type=Not]Master Note for: Forms: 9.x and 10.x: Troubleshooting FRM-92050, FRM-921xx [ID 189867.1]
    I also use a tip when I encounter this problem that consist on making a search/replace pl/sql : search the string "*;*" and replace it by the same "*;*" .
    That make to whole forms to be recompile for sure.
    And it works for me.
    Regards
    JeanYves

  • When starting forms FRM-92101, FRM-93000 messages , glibc mess. on OS

    Customer called us.
    Machine hasn't been rebooted for a long time after rebooting and bringing up forms services we get frm-92101 frm-93000 messages even before logging in. The Acceptance environment has no problems.
    Messages on OS:
    Aug 2 10:05:13 ccc frmweb: *** glibc detected *** frmweb: free(): invalid next size (fast): 0x0a408fd8 ***
    Messages in logfile:/u01/app/oracle/product/10.1.2.0.2/oas/j2ee/OC4J_BI_Forms/application-deployments/formsapp/OC4J_BI_Forms_default_island_1
    12/08/03 14:07:37 formsweb: Forms session <2> aborted: unable to communicate with runtime process.
    12/08/03 14:07:37 formsweb: Forms session <2> exception stack trace:
    java.io.IOException: FRM-93000: Unexpected internal error.
    Details : No HTTP headers received from runform
    at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    On OS we get at the same time:
    frmweb: *** glibc detected *** frmweb: free(): invalid next size (fast): 0x0af80fd8 ***
    Tried strace as stated in 275510.1 however what to do with output
    Cause probably a change some time ago without restart tier, after restart tier problem pop's up

    We are launching one of the Apps Forms Page What is the form name? What is the navigation of the form?
    Did you try to regenerate the form via adadmin? If not, please do so and check then.

  • FRM-92101 when password expired

    Hi there,
    I have a custom login form. If the user's password has expired i am getting FRM-92101 error.
    This is the code i have when the user clicks on connect button
    IF (lv_errnum = 28001) -- password expired
    THEN
    al_id := FIND_ALERT ('ERRS');
    SET_ALERT_PROPERTY
    (al_id,
    alert_message_text,
    'Your password has expired. Please enter a new password in the next pop up window.'
    al_button := SHOW_ALERT (al_id);
    LOGOUT;
    LOGON (:logon_block.username,
    :logon_block.PASSWORD || '@' || :logon_block.dbconnect,
    TRUE
    RETURN TRUE;
    At LOGON, 92101 is occuring, oracle's default change password block is not popping up. I want it to pop up.
    Can anybody help me??
    Thanks

    Instead of hardcoding values, i created another datablock to accept new values and moved LOGON to the OK button.
    My old code has been modified as
    ELSIF (lv_errnum = 28001) -- password expired
    THEN
    al_id := FIND_ALERT ('ERRS');
    SET_ALERT_PROPERTY
    (al_id,
    alert_message_text,
    'Your password has expired. Please enter a new password in the next pop up window.'
    al_button := SHOW_ALERT (al_id);
    message('before msg level');
    message('before change pwd');
    go_block('Chg_pwd');
    RETURN TRUE;
    When button pressed for OK button
    message('begin ok button');
    LOGON(LOGON (:chg_pwd.uname,
    :chg_pwd.new_pwd || '@' || :logon_block.dbconnect,
    TRUE
    Even before message, 'before change pwd' shows up, 92101 pops up.
    I have another question, how do you force oracle default password change pop up to show up?
    Thanks

  • FRM-92101 when calling forms.

    Hello Everybody!!
    I'm trying to call a form from another using: web.show_document('http://tierra.cantv.net:7778/forms90/f90servlet?config=webutil&form=ADJUNTAR_ARCHIVO&id_caso=' || :id_caso); inside a push button.
    My first form (the caller) run fine, but when i push the button a FRM-92101 appear in the applet of the second form (the calle).
    The complet mesagge of this error is "A failure has ocurred on the server. You will need to reestablish your session"...I don´t know why the session was lost.
    My forms version is 9.0.2.9.0 and the AS version is 9i rel 2.
    Thanks so much.
    Beatriz.

    Thanks for your answer Frank!
    Can you refer me a link to read about this known issue, or doesn't have solution in 9i? :S...in this momment i can't install 10g :(
    Beatriz.

  • FRM-92101 when tringing to display jpg.

    Hi all,
    We have a form that displays the blob held in the database. It is saved as a JPG and uploaded but when we open the form we get FRM-92101 and the applet crashes.
    If we resave the jpg in paint or another such program it is fine so we know the image must be corrupt or in an incorrect format.
    Can anyone suggest a way of checking the validity of an image to ensure it is viewable on the form before we upload so we can stop people doing this?
    We run 10.1.2.3 application server with 10.2.0.5.0 database
    Thanks

    Hi, yes this is what i am trying to do. Before uploading the JPG, check it is a valid file.
    Not sure how i can check this, as when i display it just crashes the forms applet.
    I was trying to find the valid format in this thread but had not had any input.
    Valid TIFF, JPG images

  • FRM-92101 when user tries to log on with invalid password

    Hi,
    We have the following issue.
    When users try to log on to our webforms applications with correct user name and password everything works fine.
    When they try to logon and use (by accident) an incorrect password they do not get the expected ORA-1017 invalid username/password; logon denied but a FRM-92101 - There was a failure in the Forms Server during startup ....
    Any help is appreciated!

    B.t.w. the application.log on the Oracle Application Server shows the error text:
    java.io.IOException: FRM-93000: unexpected internal error.
    Details: No HTTP headers received from runform
    at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:534).

  • FRM-92101 when trying to launch test.fmx on new installation

    Hi,
    I installed AS10g 10.1.2.0.2 Infrastructure and BI Forms on OEL5, installation seemed to go fine, but when I tried to launch the demonstration form, I get this FRM-92101 error and a Java exception notification in the applet window. I'm pretty sure I have installed all the dependencies & prereqs. The global-application.log says:
    12/04/04 16:00:11 dms: Stopped
    12/04/04 16:00:11 defaultWebApp: Stopped
    12/04/04 16:00:11 Stopped (shutdown executed by jazn.com/admin from 127.0.0.1(localhost.localdomain))
    The Application log tells me the form session failed because there was an error loading shared libraries: libXm.so.2
    When I 'locate' this libXm.so.2 its there in $ORACLE_HOME/lib
    Can someone please point me in the right direction on this?
    Sean

    I recommend double-checking all of the configuration changes you made to ensure there are no typo's and all of the required libraries are referenced. For example, I've see where people have removed the frmall.jar assignment to the archive variable in the formsweb.cfg (archive=frmall.jar).
    Craig...

  • Frm-92101 when try to run the test form

    dear all,
    i have just install OAS 10g rel 2 on windows 2003 server
    when i try to call http://apps10
    - where apps10 is the server name -
    welocme sreen get ok
    when i try to access a test form
    http://apps10/forms/frmservlet?form=test.fmx
    i got frm error frm-92101 and details are following :
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    oracle.forms.net.ConnectionException: Forms session <4> failed during startup: no response from runtime process
         at oracle.forms.net.HTTPNStream.getInfoFromServlet(Unknown Source)
         at oracle.forms.net.HTTPNStream.<init>(Unknown Source)
         at oracle.forms.net.HTTPConnection.connect(Unknown Source)
         at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
         at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
         at oracle.forms.engine.Runform.initConnection(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    Are you sure that all the file in the project is execuatable ?
    What error number you are getting, Can you post your VI.
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet

Maybe you are looking for