FRM-92101 when creating excel file through webutil
I am getting forms error FRM-92101 error when loading a large amount of records into an excel file using webutil
FRM-92101
A Network Error has occurred
The forms client has attempted to reconnect to the server 1 time(s) without success
I can successfully create the excel file without the the FRM-92101 when loading only 100 out of 2,000 records from the datablock.
But if I try to load 1,000 out of the 2,000 records then in the middle of the loading process I get the FRM-92101 error.
What is causing this error? A timeout issue with forms? How much the excel file can actually handle? Could it be an security issue on the network?
What can be done to remedy the problem? Just save data little bits at a time?
Thanks,
Michelle
I was running the form from my DS and when I put the form on the application server there were no FRM-92101 errors.
I'm not sure why running the form from my DS caused this error and running the form from the application server didn't?
Thanks,
Michelle
Similar Messages
-
Create Excel file in application server but the field value is incorrect
Hi Experts,
i am facing a problem when create excel file in application server using OPEN DATASET command.
the internal table have 4 field and one of those field contains 19 digit number --> ICCID.
the code running well, successfully create EXCELfile in application server but the problem is SAP only copy exactly first 15 digit numeric only and the rest became zero 0
Example :
the field value in internal table is 8962118800000447654 but when i opened in the excel file the value became 8962118800000440000.
and if i add alphabet like a8962118800000447654 then it is correct.
is there is anything wrong with my code?
here is my code
CONSTANTS: c_tab TYPE abap_char1 VALUE cl_abap_char_utilities=>horizontal_tab. "Tab Char
Data : begin of lt_zdsdmmdt00005 occurs 0,
SERNR (18) type c,
MSISDNl(20) type c,
BOX1 (20) type c,
ICCID(30) type c,
end of lt_zdsdmmdt00005.
data : ld_temp(100) type c.
i_file = '/usr/sap/DM/test_excel.xls'.
open dataset i_file for output in legacy text mode.
loop at lt_zdsdmmdt00005.
move lt_zdsdmmdt00005-ICCID to ld_iccid .
concatenate lt_zdsdmmdt00005-sernr lt_zdsdmmdt00005-MSISDN lt_zdsdmmdt00005-BOX1 ld_iccid
into ld_temp separated by c_tab.
transfer ld_temp to i_file.
endloop.
close dataset i_file.
Best Regard,
Akbar.Hi Naveen,
thanks for your reply,
i already tried and the result still the same. any idea?
Best Regard,
Akbar. -
ORA-06508 cannot create excel file
Hi,
I have forms 6i and windows 7. We have few forms which should create excel files but all of them fail with ORA-06508 and it happens only on my PC. Other colleagues don't have any problem with it. Forms path on my PC is the same as ones on other PC's.
Also weird, when I run problematic forms through debugger, they work correctly and create excel files.
How to solve this?
Tnx in advance,
NatiNati,
Recompiling libraries is not an option because of dependencies on too many forms. The number of Forms in your application and their dependencies is irrelevant if you follow one simple rule: Always compile PL/SQL Libraries first; compile Menu Modules second and lastly, compile your Forms. This will eliminate the dependency issues.
Anyway, mass recompiling is not allowed because of company rules. I disagree with this rule, but I don't work for your company! ;) Perhaps it is time for your company to re-evaluate this rule. :)
I tried with replacing ";" with ";" in particular form and the result was non-oracle exception 304500 which unfortunately doesn't say anything detailed. If this produced an error, I recommend you close all Forms related applications; re-open Forms builder and try again. This method should never produce an error.
I have forms 6i and windows 7.Forms 6i is not supported with Windows 7. More importantly, they are not compatible with each other. Forms 6i was designed to run on Windows 95/98. The differences between the Windows versions is tremendous. If you are unable to upgrade your Forms version, then at the very least, I recommend you run your application in Windows XP mode. This is not just setting the "Compatibility" to Windows XP. Take a look at Windows XP Mode - Windows 7 features, Install and Use Windows XP Mode in Windows 7 and Download Windows XP Mode.
Running Forms 6i on Windows 7 is like mixing Pickles with Ice Cream. Somethings are just not meant to go together. :)
Craig... -
How to Create Excel File in Background processing with different colors
HI All
I am trying to create Excel file in background & send it to user through e-mail, this i could acheive using fucntion module SO_DOCUMENT_SEND_API1, but here my requirement is i want to put different colors to columns of excel & this should happen in Background processing,
Initially i completed above requirement by using HTML type of document with attachment type 'ALI' & formatted output using write statement & used colors, after that i took this o/p using save_list function module & then table compress...etc.
but i don't know how to achieve same if we need o/p in excel as size of object of excel file is less than that of HTML
I am thankfull to everybody who will help me.
Regards
LokeshLokesh,
Iam also trying to populate my text file with colors as an attachment . If you know this please let me know. -
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01403
hi
when i am searching AP module and
Payables Manager - > Oracle Payable - > Setup -> Invoice-> Distribution Set
i am getting this FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01403.
what to do?
RHEL 5.3
EBS 12.0.0 RUP 6
1)I have tried adadmin compling forms
2)generating trace and tkprof but still found none.
what to do?
Regards
Edited by: new2appsdba on Jul 16, 2010 1:33 AM
Edited by: new2appsdba on Jul 16, 2010 1:37 AMhsawwan wrote:
Hi,
Please see if (Note: 1074119.1 - R12. APXINWKB: When Trying To Change Invoice Distribution Line Type Get Error: FRM-40735:PRE-RECORD Trigger Raised Unhandled Exception.ORA-01403) is applicable.9747677:R12.AP.B patch which is for 12.1 and made the SR.
>
If this does not help, obtain the FRD file and see if more details are collected in the logs.
Note: 445166.1 - How to create a FRD (Forms Runtime Diagnostic) Log in EBusiness Suite R12 using Forms 10gwatching
Note: 438652.1 - R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications
Note: 867943.1 - Steps To Take FRD Trace in 11.5.10 & R12
Thanks,
Hussein -
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01422
when i am searching AR module and
Receivables - > Transactions - > Transactions
i am getting this FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01422.
what to do?user9095240 wrote:
Hi,
1. This form was working fine until patch 8407693 has been applied.
2. Yes, I'm getting this error in every responsibility or user
3. No, no personalizations
I've read another time docs Hussein linked and as in "Troubleshooting Transaction Types In Oracle Receivables (Doc ID 1090878.1)" Patch Related paragraph, seems like I need Patch 8302210:R12.AD.B cause my admorgb.pls version is 120.21.12010000.2 instead of 120.21.12010000.3. I think replicate seed data program duplicated something in db. Is it possible?
Regards
With the information you have provided so far, it's hard to say that the cause of the issue is because of this file (version). However, if this is a test instance you may proceed and apply the patch and see if it helps.
Thanks,
Hussein -
Rapid install gettin error when create control file
hai all ,
i faced problem when im install fresh ebs R12
my environment :
sun sparc 64 bit
solaris 11
this occur when i try to install fresh R12
using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
and when creating control file failed,
is any clue with this problem ?
all prerequisite reference to doc :
R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
the detail log below this
Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "PROD"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0hai asif,
solved my problem , with this doc
Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
# /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
For example to configure eight VCPUs for the Logical Domain named "ebs1":
# /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
Please review the Logical Domains Administration guide for detailed information.
Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
thanks a lot..
regards
Imrons -
What is the best approach/method to creating excel files on 9i using PL/SQL stored procedures/packages?
I have seen multiple posts on this topic but would like one source for this solution. I have also visited asktom and seen an example using owa_sylk. However, that one is specific to Oracle 8. Is there a newer and more efficient way to creating Excel files?
Regards...Is there a newer and more efficient way to creating Excel files?Nope.
And if you are required to use a stored procedure, then the best way is to write out a .csv file using UTL_FILE which is probably what you saw in the examples you mentioned. -
Can we create .CSV files through documaker
Hi,
Is it possible to create .csv files through documaker apart from pdf's
ThanksWith apologies, it is still unclear (to me) what you are asking.
It is possible to create files using DAL, but to offer more specific guidance requires a better understanding of what it is that you want.
A CSV is a Comma-Separate Value file. A PDF file is a printed document file containing formatted text content, graphics, lines, boxes, etc - in other words a fully-composed document. I'm not exactly sure how a PDF and a CSV file could contain the same data.
Are you perhaps asking to get an index of the created PDF files written as a CSV file? Something that contains a row of key transaction data along with the file name of the generated PDF? Perhaps something akin to the batch (BCH) files that can be produced per transaction recipient?
Are you asking for an export file of all the field data that went into the creation of the document and included in the PDF? Normally a CSV has a header that describes the columns and then each row of data would be consistent with that header. Without knowing that every PDF file you create will have exactly the same number of fields defined, it is difficult to imagine that a single CSV file would be sufficient. And depending upon the number of fields and the size of the data assigned to each, this could be quite a long record per PDF in the resulting CSV file.
Or perhaps you had in mind to get a name / value pair written for each field with data written on separate lines? This would not a be a true CSV file, but could have the name and values separated by commas if that is what you require.
You have something specific in mind and yet, we are not in your mind. We need more specific information on exactly what you are trying to accomplish. -
Hi,
I'm to create Excel file by C# codes and have got this
Error 1 Assembly 'Microsoft.Office.Interop.Excel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' uses 'office, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' which has a higher version than referenced assembly 'office, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'
Error 2 Assembly 'Microsoft.Office.Interop.Excel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' uses 'Microsoft.Vbe.Interop, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' which has a higher version than referenced assembly 'Microsoft.Vbe.Interop, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'
using these codes
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
using System.Text.RegularExpressions;
using System.Globalization;
using System.Collections;
using System.Diagnostics;
using System.Drawing;
using Microsoft.Office.Interop;
using Excel = Microsoft.Office.Interop.Excel;
namespace ns1
class Program
static void Main(string[] args)
string orp_path = "//ABC";
bool allowappend = true;
string test = "test";
Excel.Application app = null;
Excel.Workbook workbook = null;
Excel.Worksheet worksheet = null;
Excel.Range workSheet_range = null;
object misValue = System.Reflection.Missing.Value;
Excel.Application xlApp = new
Microsoft.Office.Interop.Excel.Application();
workbook = xlApp.Workbooks.Add(misValue);
workbook = xlApp.Workbooks.Add(misValue);
worksheet = (Excel.Worksheet)workbook.Worksheets.get_Item(1);
worksheet.Cells[1, 1] = "Run Date";
workbook.SaveAs("c:\\" + test + ".xls", Excel.XlFileFormat.xlOpenXMLTemplate, misValue, misValue, misValue, misValue, Excel.XlSaveAsAccessMode.xlExclusive, misValue, misValue, misValue, misValue, misValue);
workbook.Close(true, misValue, misValue);
xlApp.Quit();
releaseObject(worksheet);
releaseObject(workbook);
releaseObject(xlApp); ...
on VS 2013. Any advice?
Many Thanks & Best Regards, Hua MinHey,
Not sure what the problem is, I got the code working.
One thing you're doing wrong though: Excel.XlFileFormat.xlOpenXMLTemplate supposes you're using the file extension ".xlsx" (Open XML format) and not ".xls" (Microsoft Excel 97-2003).
So you should start by changing either the extension to xlsx or the XlFileFormat to
xlExcel8.
For further reference take a look
here -
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.
Hi Guys,
I am a beginner in Oracle apps and have been trying to setup receivables module. I have completed all necessary setups such as system options, transaction types, transaction sources, Auto accounting etc.
Now, when I try to open transaction window, I am getting the following error
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502
RDBMS : 11.2.0.2.0
Oracle Applications : 12.1.3
Thanks in advance.. :-)Please see these docs.
Repair Orders Form Error: 'FRM-40735: When-Create-Record Trigger raised unhandled exception ORA-06502' For Instances With Alphanumeric Instance Numbers [ID 580147.1]
FRM-40735:WHEN-CREATE-RECORD Trigger Raised Unhandled Exception ORA-06502 [ID 125204.1]
Attempt To Open IGIPAPPF Approval Profile Form Fails With Error: FRM-40735 WHEN-CREATE-RECORD Trigger raised unhandled exception ORA-06502 [ID 418546.1]
Transactions Workbench Error: ORA-06502 [ID 1295626.1]
Transactions Workbench Error: Listing of FRM Errors [ID 1321612.1]
Forms Error: FRM-40735 [ID 1295620.1
Credit Transactions Form Errors Out With FRM-40735 [ID 1079945.1]
Thanks,
Hussein -
Automatically schedule FR or IR reports to create Excel files???
Hello,
My client asked me to 1) create reports against Essbase cubes, 2) automate the update of the reports to Excel files and 3) email the results to various people. In the first phase of this project I was able to do some of this as follows:
1) Created FR reports.
2) Scheduled the update of the FR reports to PDF files using the scheduler in Hyperion Workspace. NOTE: I created PDF files because that is the only thing that the scheduler can automatically produce from FR reports.
3) Created an Excel VBA application that emails the PDF files to a variable list of recipients (each report goes to a different list of people).
Now we are entering the second phase of this project and the client is asking to have the reports created in Excel files instead of PDF.
***** Questions *****
1) Can an IR report be scheduled using the Hyperion Scheduler in Hyperion Workspace to create Excel files?
2) Is there a utility (either Hyperion or other) that can convert PDF files to Excel files with the exact formatting of the original PDF?
Thank you,
Bill HThank you for your reply. After your reply I looked in the Hyperion Workspace User Guide and found how to schedule an IR report to create an Excel file. I think the next thing I am trying to determine is how to do "bursting" in IR. I currently have an FR report that gets data from Essbase. I have scheduled this in Workspace to run for all children of a member (or a different example would be all zero level decendants of a member). The Workspace scheduler allows me to create a file for each member and to add the member name to each filename so that they are different. Can I do the same type of thing with IR?
Thank you,
Bill H -
Error when creating ZIP file (return value 2 when IGS was called)
Hello All
I attempted to Schedule a Query to the Portal folders and executes fine. However when it's scheduled to and email, I am getting this message
'Error when creating ZIP file (return value 2 when IGS was called)'
Any ideas?
Thanks ...BKHello Kai
Thanks very much for the info. how would I know what patch the IGS is?
Thank you.
Regards..BK -
Is it possible to send an excel file through xi
Hi all,
is it possible to send an excel file through xi? if it is possible plz tell me that.....
plz help me on this........
Thanks...Hi,
See this link
integrating legacy system & sap r3 system
Amresh -
FRM-92101 when scrolling through a data block on a form
Folks,
We recently converted a Forms 6i application to Forms 10g (re-compiled, little changes were requested). Running against an Oracle 10g database (10.1.2.3) on a Solaris server.
When users scroll through the data block on a canavas after about 2 or 3 screens t hy get the wonderful error message FRM-92101, talking about an error in the Forms Server at startup... (Kinda silly since it is AFTER the Form has started running, but beyond the point).
I have tried adjusting the # of rows buffered for datablock (started out at 0, changed to 25, 50, 100) and rows to display at once to 1, 10, 16 and we still keep getting this error.
Can anybody suggest an solution or point me in the right direction to solve this issue?
Thank you,
Tony Miller| Consultant | MRE Consulting, Ltd.
3333 Richmond | Suite 300 | Houston, Texas 77098 [email protected] | 713-844-6211 Consulting | Infrastructure | Outsourcing | StaffingTony,
I don't have your correct email address. Drop me a line at [email protected]
Thanks,
Monty
Maybe you are looking for
-
Bad performanc​e of webcam hp4540s
I recently purchased HP4540S laptob. its webcame's result is not good. I observed of other laptob's webcam and their result are excellent. I contacted to my vendor in this regard. He told me that you ' ve purchased business machine and it is not cry
-
HELP! How to keep my iphone sync to my pc after format?
I'm planning to format my pc! I know that my iphone can sync with only one itunes library! so how can i safely format my pc and keep my iphone synchronized with it, without fear of losing my songs or apps? I'm using windows 7
-
Strange discoloration or off-colour when a drop shadow applied to a shape.
Hey there, I'm in the very early stages of a logo design and I've applied a drop shadow to a triangle shape. When I export to an eps file I get the problem below. Is there any reason for this? I'm very new to illustrator and I'm sure it's something s
-
It's showing that I need to update an app that I've updated over and over. How do I correct this?
-
Java passing too long String parameter to SQL
Hi all, I'm having trouble with passing parameters to MS SQL. My application calls a stored proc from the SQL server that has 11 parameters, 9 of them are of type varchar. But it fails because the java virtual machine built a huge query that MS SQL c