FRM-92101 - Madness!

Hi Folks,
Just a quick note to share my experience of dealing with this evil error message. Normally when it appears, I use the debugger to track down the trigger or procedure in which it occurs, add a few 'NULL;' lines to the code, recompile and voila! the error disappears as mysteriously as it arrived. However, with a form today this just wouldn't work. The error seemed to occur in a trigger before it even reached the PL/SQL. So... I tried rebooting, converting the fmb to an fmt and back again, NULLs everywhere, prayer and sticking pins in a voodoo doll of Larry Ellison. In the end I found the post on this forum about doing Ctrl-K, Ctrl-Shift-K and Ctrl-T and - incredibly - that did the trick! Who would have thought that a simple Ctrl-K would fix it... Why is Forms so buggy like this?
Regards,
Simon.

The control-shift-K thing is a pain, but you just get used to doing it before generating the .fmx file.
Tony
Message was edited by:
Tony Grigg

Similar Messages

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

FRM-92101: Load Balancing Forms 10g with Web Cache

Hi,
IÂ´m having some problems with Oracle Forms and Webcache 10g and I was wondering if you
could help.
Machines: (Pentium IV 2.6 GHz; 2GB RAM; 80GB HD)
A. Red Hat Linux AS 2.1
Oracle AS 10g - Infrastructure Installation
B. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
C. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
I didnÂ´t apply any Patchsets of Oracle AS 10g. My current version is 9.0.4.0 .
Goal:
Use Oracle Webcache 10g on machine B for Load Balancing an Oracle Forms Application
on machines B and C.
Facts:
The Oracle AS 10g installation on the 3 machines was made without problems.
The Forms Applications are running without problems on both Forms servers in machine B and C.
Symptoms:
IÂ´m getting the following error when I try to acces the forms application through Webcache:
FRM-92101: There was a failure in the forms server during startup.
This could happen due to invalid configuration.
Please look in the web-server log file for details.
But, this error happens ONLY when BOTH OC4J_BI_Forms instances (machines B and C) are
running.
When just one of the OC4J_BI_Forms is running everything works fine.
Webcache Configuration:
IÂ´ve followed Metalink note 207668.1: Configuring Web Cache as a Load Balancer for Application Servers
step by step to make the configuration of the following components:
1. Configuration of the origin servers
2. Configuration of Site definitions
3. Configuration of Site to server mapping
After that, IÂ´ve follwed the Metalink note 229900.1: Integrating and using Web Cache with Forms 9i for Load Balancing
step by step to make the configuration of the following components:
4. Session Binding
Then I try to test the Load Balancing and I got the error FRM-92101 when both OC4J_BI_Forms
instance were running.
IÂ´ve searched Metalink and found note 268830.1: Webcache Won't Load Balance 2 Forms Instances.
Following the note instructions I did the following changes:
Added these lines at the end of HTTPD.conf (machine B):
CookieTracking On
CookieName myformscookie1
Added these lines at the end of HTTPD.conf (machine C):
CookieTracking On
CookieName myformscookie2
In Webcache configuration:
IÂ´ve Changed the default session binding from JSESSIONID to "ANY SET COOKIE" for the
site's session binding.
But even after these changes IÂ´m getting FRM-92101 error on the same conditions.
How can I solve this problem ?
Thank you in advance.
Marcus Santos.
([email protected])

Just ran into this problem last Tuesday, Nov.30 and applied the changes today.
My configuration is similar to yours: 9.0.4 web cache on machine A, 9.0.4 10gAS forms and reports standalone on machine B and C (not a cluster, no infra).
I appended the Cookie lines you mentioned in httpd.conf located in $ORACLE_HOME/Apache/Apache/conf in both machines B and C.
One important thing you may have missed. After changing httpd.conf in each 9iAS instance, you need to make the change known to dcmctl so issue:
dcmctl updateConfig -ct ohs
Then do the following for each 9iAS instance and it should be ready for webcache:
dcmctl stop
dcmctl start
Setup Any-set-Cookie in webcache instead of JSESSIONID and the whole thing should now work. You can run a form through machine A which will load balance to either machine B or C (which can both be up). Then, try shutting down 9iAS on machine B or C and run a form again. They now all work.
HTH,
Raffy

FRM-92101: Load Balancing Forms 10g with Webcache

Hi,
IÂ´m having some problems with Oracle Forms and Webcache 10g and I was wondering if you
could help.
Machines: (Pentium IV 2.6 GHz; 2GB RAM; 80GB HD)
A. Red Hat Linux AS 2.1
Oracle AS 10g - Infrastructure Installation
B. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
C. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
I didnÂ´t apply any Patchsets of Oracle AS 10g. My current version is 9.0.4.0 .
Goal:
Use Oracle Webcache 10g on machine B for Load Balancing an Oracle Forms Application
on machines B and C.
Facts:
The Oracle AS 10g installation on the 3 machines was made without problems.
The Forms Applications are running without problems on both Forms servers in machine B and C.
Symptoms:
IÂ´m getting the following error when I try to access the forms application through Webcache:
FRM-92101: There was a failure in the forms server during startup.
This could happen due to invalid configuration.
Please look in the web-server log file for details.
But, this error happens ONLY when BOTH OC4J_BI_Forms instances (machines B and C) are
running.
When just one of the OC4J_BI_Forms is running everything works fine.
Webcache Configuration:
IÂ´ve followed Metalink note 207668.1: Configuring Web Cache as a Load Balancer for Application Servers
step by step to make the configuration of the following components:
1. Configuration of the origin servers
2. Configuration of Site definitions
3. Configuration of Site to server mapping
After that, IÂ´ve follwed the Metalink note 229900.1: Integrating and using Web Cache with Forms 9i for Load Balancing
step by step to make the configuration of the following components:
4. Session Binding
Then I try to test the Load Balancing and I got the error FRM-92101 when both OC4J_BI_Forms
instance were running.
IÂ´ve searched Metalink and found note 268830.1: Webcache Won't Load Balance 2 Forms Instances.
Following the note instructions I did the following changes:
Added these lines at the end of HTTPD.conf (machine B):
CookieTracking On
CookieName myformscookie1
Added these lines at the end of HTTPD.conf (machine C):
CookieTracking On
CookieName myformscookie2
In Webcache configuration:
IÂ´ve Changed the default session binding from JSESSIONID to "ANY SET COOKIE" for the
site's session binding.
But even after these changes IÂ´m getting FRM-92101 error on the same conditions.
How can I solve this problem ?
Thank you in advance.
Marcus Santos.
([email protected])

Did you ever Get this to work?
I am having some problems trying to load balance with Oracle Forms, Discover and reports Oracle Application Server Release 10g (9.0.4.0.2) and I was wondering if you could help. Has any one ever got this to work consistently? We are an ERP product written mostly in forms (904) and are trying to implement are largest customer there performance issue so we need the load balancing to work. Will also accept other recommendation as cost effective as solutions.
Site 1:
A: SERVER
     Host as1.xyzco.local
     Version 10.1.2.0.2
     Installation Type Identity Management and Metadata Repository
     Oracle Home E:\oracle\inf_1012
     Farm as1db.xyzco.net
o     HTTP_Server
o     Internet Directory
o     OC4J_SECURITY
o     Single Sign-On:orasso
o     Management
B SERVER
     Host as2. xyzco.local
     Version 9.0.4.0.2
     Installation Type Business Intelligence and Forms
     Oracle Home E:\oracle\mid_904
     Farm as2db. xyzco.net
o     Discoverer
o     Forms
o     home
o     HTTP_Server
o     OC4J_BI_Forms
o     Reports Server
o     Web Cache
o     Management
C SERVER
     Host as3. xyzco.local
     Version 9.0.4.0.2
     Installation Type Business Intelligence and Forms Discoverer and Reports
     Oracle Home E:\oracle\mid_904
     Farm as2db. xyzco.net
o      Discoverer
o     Forms
o     home
o     HTTP_Server
o     OC4J_BI_Forms
o     Reports Server
o     Web Cache
o     Management
All servers Are:
     Windows 2003 Standard Server with current service packs
     Xeon Dual Processor with 4GB ram
     Raid 0 drives 2 for OS and 2 for Oracle
Daniel Brody
[email protected]

FRM-92101 when trying to launch test.fmx on new installation

Hi,
I installed AS10g 10.1.2.0.2 Infrastructure and BI Forms on OEL5, installation seemed to go fine, but when I tried to launch the demonstration form, I get this FRM-92101 error and a Java exception notification in the applet window. I'm pretty sure I have installed all the dependencies & prereqs. The global-application.log says:
12/04/04 16:00:11 dms: Stopped
12/04/04 16:00:11 defaultWebApp: Stopped
12/04/04 16:00:11 Stopped (shutdown executed by jazn.com/admin from 127.0.0.1(localhost.localdomain))
The Application log tells me the form session failed because there was an error loading shared libraries: libXm.so.2
When I 'locate' this libXm.so.2 its there in $ORACLE_HOME/lib
Can someone please point me in the right direction on this?
Sean

I recommend double-checking all of the configuration changes you made to ensure there are no typo's and all of the required libraries are referenced. For example, I've see where people have removed the frmall.jar assignment to the archive variable in the formsweb.cfg (archive=frmall.jar).
Craig...

FRM-92101 after second try logon

Hi
I've made an on-logon trigger. In that trigger I've made hardcoded 3 tries to logon.
When I logon without any information, no username, no password and no CS the trigger continues and exit at the 3th time.
But when I logon with the wrong un and pw, but the right CS..the first works and continues, but the second time I get the FRM-92101.
Can somebody help me out?

CODE ON-logon trigger
IF un_old is null and pw_old is null and cs_old is null -- Wijzigingen IF 1
THEN
     IF cs is null and un is null and pw is null -- Niets ingevuld IF 2 1e AANLOG
          THEN
          SET_ALERT_PROPERTY('LOGON_ALERT',ALERT_MESSAGE_TEXT,
DBMS_ERROR_TEXT||'Retry Login?');
button_pressed := SHOW_ALERT('LOGON_ALERT');
IF (button_pressed = ALERT_BUTTON2) -- Annuleren IF 3
THEN
RAISE FORM_TRIGGER_FAILURE;
ELSE
     logon_screen;
     get_connect_info;
     IF cs is null and un is null and pw is null -- Niets ingevuld IF 4 2e AANLOG
          THEN
          SET_ALERT_PROPERTY('LOGON_ALERT',ALERT_MESSAGE_TEXT,
DBMS_ERROR_TEXT||'Retry Login?');
button_pressed := SHOW_ALERT('LOGON_ALERT');
IF (button_pressed = ALERT_BUTTON2)-- Annuleren IF 5
THEN
RAISE FORM_TRIGGER_FAILURE;
ELSE
     logon_screen;
     get_connect_info;
          IF cs is null and un is null and pw is null --Niets ingevuld IF 6 3E AANLOG
                                   THEN
                                   message ('3.Login poging mislukt!'||CHR(10)
                    ||'Controleer gebruikersnaam, wachtwoord en database waarden!');
                    RAISE FORM_TRIGGER_FAILURE;
                    ElSE -- Ingevuld IF 6
                                                  logon(un,pw||'@'||cs, FALSE);
                                                  IF FORM_SUCCESS -- Gevuld 7
                                                  THEN
                                                  connected := TRUE;
                                                  clear_message;
                                                  ELSE
                                             RAISE FORM_TRIGGER_FAILURE;
                                                  END IF; -- Einde Gevuld 7
                                             END IF; -- Einde IF 6
                         END IF; -- Einde IF 5
                              ELSE -- ingevuld IF 4 2e AANLOG
                    get_connect_info;
                    logon(un,pw||'@'||cs, FALSE);
                                   IF FORM_SUCCESS -- Gevuld 10
                                   THEN
                                   connected := TRUE;
                                   clear_message;
                                             ELSE     SET_ALERT_PROPERTY('LOGON_ALERT',ALERT_MESSAGE_TEXT,
                         DBMS_ERROR_TEXT||'Retry Login?');
                         button_pressed := SHOW_ALERT('LOGON_ALERT');
                         IF (button_pressed = ALERT_BUTTON2)-- Gevuld 13
                         THEN
                                   RAISE FORM_TRIGGER_FAILURE;
                              ELSE
                                                  logon_screen;
                                                  get_connect_info;
                                                  IF cs is null and un is null and pw is null --Niets ingevuld IF 14 3E AANLOG
                                        THEN
                    message('6.Login poging mislukt!'||CHR(10)
                              ||'Controleer gebruikersnaam, wachtwoord en database waarden!');
                    RAISE FORM_TRIGGER_FAILURE;
                    ElSE -- Ingevuld IF
                                                  logon(un,pw||'@'||cs, FALSE);
                                                  IF FORM_SUCCESS -- Gevuld 15
                                                  THEN
                                                  connected := TRUE;
                                                  clear_message;
                                                  ELSE
                                                  RAISE FORM_TRIGGER_FAILURE;
                                                  END IF; -- Einde Gevuld 15
                                        END IF; -- Einde Gevuld 12
                                        END IF; -- Einde Gevuld 11
                                   END IF;          -- Einde Gegevuld 10
                              END IF;
                    END IF;     -- Einde IF 3
ELSE -- ingevuld IF 2 1E AANLOG
get_connect_info;
logon(un,pw||'@'||cs, FALSE);
               IF FORM_SUCCESS -- Gevuld 18
               THEN
               connected := TRUE;
               clear_message;
               ELSE
                         SET_ALERT_PROPERTY('LOGON_ALERT',ALERT_MESSAGE_TEXT,
DBMS_ERROR_TEXT||'Retry Login?');
button_pressed := SHOW_ALERT('LOGON_ALERT');
IF (button_pressed = ALERT_BUTTON2)-- Gevuld 21
THEN
RAISE FORM_TRIGGER_FAILURE;
ETC ETC ETC

Problems with webutil FRM -92101- 1.0.5 Production - forms 10g

I've installed webutil according with the webutil user's guide.
I've also sign he .jar file.
I have not made the configuration of the database with the webutil_file_transfer o webutil_db package becouse i don't need to use the file transfer utility.
I 've tested a simple form with webutil.pll and .obj subclass with the devsuite enviroment and with a server with AS 10g from two client browser pc and all work fine.
But after when i tried to test again the form it doesn't work in no pc client (with the server and eith the devsuite server).
Without webutil.pll and obj the forms work fine.
I've this error: FRM-92101: there where a failure .....
I 've this message in java console:
JInitiator: Versione 1.3.1.17
Uso della versione JRE 1.3.1.17-internal Java HotSpot(TM) Client VM
Directory principale utente = C:\Documents and Settings\wolverine1
Configurazione proxy: nessun proxy
JAR cache enabled
Location: C:\Documents and Settings\wolverine1\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Cached copy of http://ggdell2:8889/forms90/webutil/webutil.jar is out of date
Cached copy: 1-ott-04 17.26.21
Server copy: 4-ott-04 9.07.20
Loading http://ggdell2:8889/forms90/java/f90all_jinit.jar from JAR cache
Downloading http://ggdell2:8889/forms90/webutil/webutil.jar to JAR cache
Cached copy of http://ggdell2:8889/forms90/webutil/jacob.jar is out of date
Cached copy: 1-ott-04 17.26.44
Server copy: 4-ott-04 9.07.38
Downloading http://ggdell2:8889/forms90/webutil/jacob.jar to JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Versione Applet Forms: 9.0.4.0
RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
oracle.forms.net.ConnectionException: Sessione Forms <1> terminata: impossibile comunicare con il processo runtime.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
Who can help me ?

THe Java Console would indicate that you're not using the right CFG settings - you should see the WebUtil Initialisation messages

FRM-92101 when trying to run forms from Forms Builder 10g

I have been struggling with this for a few days now and have tried multiple solutions around on these forums without any resolution yet!
Trying to run Forms Builder on a Windows XP machine with Oracle Development Suite 10.1.2.0.2 installed in its own ORACLE_HOME. The installation completes succesfully and I can start the OC4J instance.
1) When I open up Forms Builder and pull up the test.fmb form and try to run it, I get the following error:
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
On clicking 'Details' the following errors are displayed:
Java Exception:
oracle.forms.netConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
2) The ORACLE_HOME\j2ee\DevSuite\application-deployments\forms\application.log includes the following errors:
11/11/25 10:02:23 formsweb: RunformProcess.connect(): failed !
11/11/25 10:02:23 formsweb: Forms session <1> aborted: unable to communicate with runtime process.
11/11/25 10:02:23 formsweb: Forms session <1> exception stack trace:
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:452)
     at java.net.Socket.connect(Socket.java:402)
     at java.net.Socket.<init>(Socket.java:309)
     at java.net.Socket.<init>(Socket.java:153)
     at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
     at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
     at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
3) The Java console has the following error:
oracle.forms.net.ConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.HTTPConnection.connect(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
     at oracle.forms.engine.Runform.initConnection(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class
Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties
Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class
Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties
Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties with no proxy
Any inputs will be greatly appreciated.

Same issue here... Been trying to get this working since a week now. I tried all the solutions like memory heap and all but no luck.
One thing that I would like to know is that, in some threads the resolution was to recompile the INS_FORMS.MK file under /forms/lib32 but with my installation I don't have that "lib32" folder under /forms/ and I can not even find that file anywhere in my entire installation.
I am using 12.1.1 on Windows Server 2008.
Any help or guidelines is greatly appreciated.
Santhosh.

FRM-92101:

Hi
I've got an error message while running form.it is....
FRM-92101:There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
What may be the fault and what is the remedy can any one suggest me?
Regards
Amritava

Gerd,
We are facing the same peoblem.
Ours is web based application with
forms 10gR1
AS also 10g
DB 9.2.0.1.0
Any clues?
Pls help..
jeneesh

FRM-92101 error while opening forms on fresh r12 vision db on hp ux (11.31)

Hi all,
I have installed vision database r12(12.0.4) on hp ux (11.31).
I am able to open the login page but when trying to access any form it gives below mention error.
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
I have checked below mention log file.
/devbackup/applvis/inst/apps/VIS_reeldev/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
Error:
Forms session <1> aborted: runtime process failed during startup with errors /usr/lib/hpux32/dld.so: Unsatisfied code symbol 'nnftboot' in load module '/devbackup/applvis/apps/tech_st/10.1.2/lib32/libclntsh.so.10.1'.
As search from Google and forums get the same issue with RHEL, issue seems to be with some library.
We are having other testing instances on the same server and I am able to open there forms.
Is any issue with library or any configuration requiring after installation?
What is post installation task after installing r12?
Not able to execute .env file with owner and privileges, why?
How to get r12 original media from oracle?
Thanks in advance
Sandeep.

Hi sandeep;
I have installed vision database r12(12.0.4) on hp ux (11.31).
I am able to open the login page but when trying to access any form it gives below mention error.
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
I have checked below mention log file.
/devbackup/applvis/inst/apps/VIS_reeldev/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
Error:
Forms session <1> aborted: runtime process failed during startup with errors /usr/lib/hpux32/dld.so: Unsatisfied code symbol 'nnftboot' in load module '/devbackup/applvis/apps/tech_st/10.1.2/lib32/libclntsh.so.10.1'.Please check below and see its helpful:
Error Dld.So: Unsatisfied Code Symbol 'Nnftboot' Signal 9 When Running Reports Concurrent Requests [ID 560287.1]
All Concurrent Requests End With Signal 9 Termination Error [ID 452714.1]
Also check Apache log files for more details
What is post installation task after installing r12?You can follow Recomended R12 patches On Metalink
Not able to execute .env file with owner and privileges, why?How you are trying to execute?
How to get r12 original media from oracle? You can log Sr for media or you can contact wiht your oracle local office
Regard
Helios

How to deploy forms? Or: FRM-92101 on Forms 10g (10.1.2.0.2)

Hello,
we have a problem with deploying changed FMX-Files.
We work with an OAS 10.1.2.0.2 and the Developer Suite 10.1.2.0.2. The Compilation works fine with frmcmp_batch.sh on the server (Linux X86).
And these Files are accessible within the JInitiator-Applet. All fine.
But now there's the problem: If anyone has opened a FMX-File within JInitiator and this FMX-File is compiled again, the compilation is successful but the access on this form is not. The user only get an error
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
Please look into the web-server log file for detatails.
Details...
Java Exception:
oracle.forms.net.ConnectionException: Forms.session <46> aborted: unable to communicate with runtime process.
at ...
I remember, there was an equivalent problem under 9i and the solution there was to set the FORMS90_MMAP-Variable. Under 10g there is no such setting. (and this is clearly no solution)
Now my question: There had to be a way to treat this problem. And all of the Forms-Developer had to have the same problem. I would be very happy if anybody could tell here how to deploy correctly.
Many thanks in advance,
Ralf

Yes, indeed.
We want to change fmx-files in a running installation because the functionality of the forms have to change, errors have to be corrected and so on.
I read the suggestions in Note 286762.1, but honestly I think it is to complicated in a development team to handle with two or more directories and to make clear, which one is the production-directory
I think this could not be the only possibility.
We thought about this:
- we have a development directory, a "waiting" directory and a productivity-directory.
The process could be:
- compiling in the development directory
- checking, if the fmx-file is in use (with lsof)
- if the fmx-file is in use, the fmx-file will be transferred into the "waiting" directory
- it the fmx-file is not in use, it will be transferred into the productivity-directory
- in regular intervalls a job has to test, if the files in the "waiting" directory are freed. If so they will be transferred, else not.
Only if changes are needed to do immediately (e.g. heavily errors), the fmx-file can be moved manually in the productivity-directory.
But this is only our idea. I thought there has to be a standard deployment-strategy from Oracle or better ideas from other developers.
Perhaps someone has a even better suggestion for us.
Many thanks in advance for every idea,
Ralf

FRM-92101 Error when trying to access forms in R12 in windows 2003 SP1

Hi,
We have installed the Oracle Applications system on one of our instance.
When we try to start the application we face some problem:
The syndrome is the following:
We are launching one of the Apps Forms Page
However, we have to wait around 8-10 minutes till we got the error
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
Details...
Java Exception:
oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.HTTPConnection.connect(Unknown Source)
at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
at oracle.forms.engine.Runform.initConnection(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)"
The OS in Windows 2003 with SP1

We are launching one of the Apps Forms Page What is the form name? What is the navigation of the form?
Did you try to regenerate the form via adadmin? If not, please do so and check then.

FRM-92101 error message

Hello all,
I have oracle and form 10g running under XP sp2. When running my form, i have the message error FRM-92101 in my first page with no executable code, it does nothing until i press a button. Last day, i had added webutil into my project and test it. It works fine. I had checked the pasts posts in the forum. but i don't find any answer to my problem. Nothing in my trace folder \forms\trace.
Here is my java consol log.
I had delete my .fmx file and recompile my program but the problem persists.
Loading http://wbcla.aaaa.ca:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://wbcla.aaaa.ca:7778/forms/java/frmall_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Loading http://wbcla.aaaa.ca:7778/forms/prod_ico/cla_ico.jar from JAR cache
Loading http://wbcla.aaaa.ca:7778/forms/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.2
oracle.forms.net.ConnectionException: Forms session <84> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
java.io.EOFException
     at java.io.DataInputStream.readUnsignedByte(Unknown Source)
     at oracle.forms.engine.Message.readDetails(Unknown Source)
     at oracle.forms.engine.Message.readDetails(Unknown Source)
     at oracle.forms.net.StreamMessageReader.run(Unknown Source)
java.lang.NullPointerException
     at oracle.forms.handler.FormWindow.handleWindowActivated(Unknown Source)
     at oracle.forms.handler.FormWindow.propertyChange(Unknown Source)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.fireBooleanPropertyChanged(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.setActive(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.laf.BaseWindowManager.transferActivationForward(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.laf.BaseWindowManager.windowRemoved(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.DesktopContainer.processDesktopEvent(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.DesktopContainer.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.DesktopContainer.removeWindow(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.close(Unknown Source)
     at oracle.ewt.lwAWT.lwWindow.LWWindow.dispose(Unknown Source)
     at oracle.forms.handler.DialogThread.doAlert(Unknown Source)
     at oracle.forms.handler.DialogThread.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks.
MK.

does this occur with all your forms-modules or just with a specific one?
If a specific one, try to remove the webutil-objects from the form and try again.
If you added webutil, did you also put webutil.pll and webutil.olb to your runtime-directory??
Last try:
do a full recompile of your moduel ctrl+Shift+K (at least in german version).
hope this helps

FRM-92101 error

Hello.
I'm currently learning forms and reports in 9.0.4 on a standalone pc. I have created a simple report in report builder that runs fine there. I believe I have correctly set up the button to run the report from a form in form builder. But when I try to run it there, I get this error: " FRM-92101. There was a failure in the forms server during startup. This could happen due to invalid configuration. Please look into the web server log for details." Can someone point me towards what I need to do to resolve this possible configuration issue?
Thanks

Hi,
hard to diagnose from remote and it may require you to debug your code up to the line causing the trouble. I think customer support might be a better help in this case.
Don't know how the user enters parameters, but if he simply provides values in pre-defined fields, can't you do immediate validation on the required fields?
Frank

FRM-92101 error while opening forms & OC4J

Hi all,
I have a customer having problem after certain number of users connecting to the application.
These are the following setup in the environment:
1. OAS 10.1.2.1
2. Windows 2003 Standard Edition SP1 32 Bit
3. Memory 2GB
They are running the application using the Oracle Form, connecting through the application using Internet Explorer.
Number of users might connect to the application are around 42 users in application server #1 and 10 users in application server #2.
Recently they reported that they experiencing the FRM-92101 in random fashion in all clients computer.
I did a check on the windows task manager and I can see that frmweb.exe process will consume around 17MB - 68MB.
This is random, not all process consuming up to 68MB, some of it will be in the avarage of 30MB to 50MB.
I checked the registry for the desktop heap setting which is in HKEY_LOCAL_MACHINE -> System -> Current Control Set -> Control -> Session Manager -> SubSystems. There is a key named Windows and inside here there is a variable called SharedSection. Currently the value is set to 2048, 3072, 2048
From what I know this setting should be enough for around 40 users.
I noticed when 42 users were connecting to app server #1, the physical memory available is only around 140MB.
This FRM-92101 error is not only happening to app server #1 but also #2 which only handles 10 users maximum.
From the information above, I have some questions:
1. What other areas that I need to check for this?
2. What other configuration I can increase so this error is not happening anymore?
3. If I check on opmnctl status, I can only see 1 OC4J home and OC4J_BI_FORMS. Does increasing the number of OC4J can suppress this error?
Please give me the enlightment.
Thank you so much,
Adhika

Hi sandeep;
I have installed vision database r12(12.0.4) on hp ux (11.31).
I am able to open the login page but when trying to access any form it gives below mention error.
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
I have checked below mention log file.
/devbackup/applvis/inst/apps/VIS_reeldev/logs/ora/10.1.3/opmn/forms_default_group_1/formsstd.out
Error:
Forms session <1> aborted: runtime process failed during startup with errors /usr/lib/hpux32/dld.so: Unsatisfied code symbol 'nnftboot' in load module '/devbackup/applvis/apps/tech_st/10.1.2/lib32/libclntsh.so.10.1'.Please check below and see its helpful:
Error Dld.So: Unsatisfied Code Symbol 'Nnftboot' Signal 9 When Running Reports Concurrent Requests [ID 560287.1]
All Concurrent Requests End With Signal 9 Termination Error [ID 452714.1]
Also check Apache log files for more details
What is post installation task after installing r12?You can follow Recomended R12 patches On Metalink
Not able to execute .env file with owner and privileges, why?How you are trying to execute?
How to get r12 original media from oracle? You can log Sr for media or you can contact wiht your oracle local office
Regard
Helios

FRM-92101 - Madness!

Similar Messages

Maybe you are looking for