From which table check 'cost element' and its corresponding GL account?
Hi,
May i know from which could i check the cost element field and its corresponding GL account field??
Questions:
"the getting cost element should check the corresponding GL account, but I canu2019t find the
corresponding table which include these two fields. So, if you know the table in which cost element can check the corresponding GL account, please tell me ."
Is below way correct:
From table CSKA, i could get the chart of accounts related with the cost elements.
Then from table SKA1, i could get the GL account according to chart of accounts field.
Then i got an relation between Cost element with GL account??
Thanks!!
Hi
Could not locate the table, but could find that, if you come to transaction KA02, click on Environment - Display General Ledger account - In Chart of Account/ In Company Code option, then you can display the GL account for individual cost elements.
regards
Parag Bhargava
Similar Messages
-
Which table if for BADI and its implementation
Which table if for BADI and its implementation
I want to know which implementations have already been created and actived for one BADI.Hi
check the tables for BADI
SXC_ATTR
SXC_ATTRT
SXC_CLASS
SXC_COCO
SXC_EXIT
SXC_FCODE
SXC_FCODET
SXC_IMPSWH
SXC_SCRN
SXC_TABLE
SXC_TABLET
Regards
Anji -
From which table feed back partner and root cause partner
hi,
can any body tell me ,from which table feed back partner and root cause partner
can be find.
i need to add this in datasource 0crm_sales_act_1.
thanks in advance.
regards,
sridhar MIt is always advsible to use function modules in CRM instead of making direct table access. Unlike R/3, CRM tables and buffering are quite complex.
In your case, to read the values of maintained Sales Areas, use the function module <h5>CRMA_BUPA_GET_SALES_AREAS</h5>
The function module takes the BP Guid (BUT000-PARTNER_GUID)
However you can also find your information in tables<h5>
CRMM_BUT_LNK0011 - BP Sales rule list
CRMM_BUT_LNK0010 - BP Sales rule list
CRMM_BUT_SET0010 - BP Sales rule set</h5>
Hope this helps.
Easwar Ram
http://www.parxlns.com -
CO, which table decribes "cost center" and "cost center group"?
Hello experts,
now I have the transaction KP06. Maybe through customizing the user has built a "cost center group" for some "cost center".
In which table can I find out the relationship between the "cost center" and "cost center group" ?
Thanks.
RD
Edited by: Marching Dai on Jun 16, 2008 2:05 PMHi Arun,
Please check this link
http://www.erpgenie.com/abap/tables_fi.htm
Please check CKPE --->CO-PC Cost Object Hierarchy: Individual Objects
CSKA Cost Elements (Data Dependent on Chart of Accounts)
CSKB Cost Elements (Data Dependent on Controlling Area)
CSKR Resource master record
CSKS Cost Center Master Data
Best regards, -
Hi,
What's the table of costs elements and their designations.
i hope ur help
regards.COFI01 Object Table for Reconciliation L MANDT / OBJNR
COFI02 Transaction Dependent Fields for MANDT / OBJNR
COFIP Single Plan Items for Reconciliat RCLNT / GL_SIRID
COFIS Actual Line Items for Reconciliat RCLNT / GL_SIRID
Hope This Helps
Good Luck -
Table for Cost Center and WBS Element.
Hi Experts,
i done the creation of Servcie Contract with account assignment category as Cost Centre "K" & Project "P". Now i'm trying to take the report for this document.
Plz help me, in which table the Cost center data and WBS Element data is stored.
Regards,
sudhakarhi!
check the table T163K and the field is KNTTP.
Reward if useful.
Yuvi. -
From which table ,i ll get both the invoice and cleared amount ???
Hi Friends,
i am making a report for my sales client where finance part is also required.
the requirement is : the sales people want know the status of the invoice generated at their end.the report shud be like if they enter the invoice no,fiscal year and coustomer they will be able to see the status of the invoice.how much pmt has received for that particular invoice,wheather it is open or fully cleared?
From which table i can get both invoice no. and the payment/pmts rerceived against that invoce/invoices.
plz guide.
Regards,
BiswaHi,
SAP Standard Report itself covers all the requirements mentioned. With FBL5N, we get to know how much has been invoiced, paid and cleared and how much advance has been paid by customer etc., in one screen. Apart from this we have also all signs which show, which all invoices are due, overdue and its easy to analyse as well.
Was this requirement given by client after seeing this standard report?
Hope this info is helpful.
Regards,
Venkat -
How to check from which table data is picking by datasource 0CDCY_ACT_ATTR
Hi Experts,
Could you please help me in finding out of the table from which datasource 0CDCY_ACT_ATTR is extracting.
As per my knowledge is should be extract from tables(infotypes) HRP5135 - 5141.If i am wrong please correct me.
Issue : My extractor(0cdcy_ACT_ATTR) is bringing wrong ACT_TYPE (Eg :5010) where as in table HRP5141 for that particular OBJID it is 9180( different).
Please help me why my extractor is bringing ACT_TYPE 5010.
This standard datasource and using Function Module : RCF_BIW_GET_ACTIVITY, How can i check from which table it is picking the data
Thanks in Advanve
SreeHi Sree,
In RSA3 on the first screen, you have the option to start debugging by marking the debug check box, once you put all the selections, click on execute and it will go to debug mode, then keep on pressing F5. It will debug your code line by line, then you can check for all the select statements.
Or once the debugging is started you will have the option to put break point on all the select statements in one shot, you can get in touch with your ABAP team.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 24, 2011 8:20 PM -
How to get Essential and additional qualifications ,From which table
Hi all,
In one of my requirement, the report should show the Qualifications and Essential qualifications columns in the output.
Requirement is :
1. I have brought qualifications of Applicant from PB0024 table.
2. I need to compare these with the Qualifications maintained in Job for the pernr.
3. There are two types of Qualifications namely essential Qualifications and additional Qualifications.
4.
How do we get the Qualifications maintained for a job/Position?
How can we distinguish between Qualifications and essential Qualifications maintained for a job at the database table level ?
Please reply ASAP.
Regards,
Rama.PHi Dilek Ersoz Adak,
How can we get the jobs assigned to a position ,from which table ?
Actually i am doing a custom recruitment report which displayes several fields along with the qualificaions and additional qualifications.
For the two fileds: in the spec it is given as:
14. Qualification (This is maintained in HRPE_PROFQ_TBJID-infotype 0024 of the employee. Thus, check Position maintained for the employee in P4002_OBJID, against this position check for Essential Qualification, related object type u2018Qu2019 HRPE_PROFQ_ESSENTIAL, compare this with the qualifications maintained for the employee in Infotype 0024, and display wherever these maintained.)
15. Additional Qualification (This is maintained in HRPE_PROFQ_TBJID-infotype 0024 of the employee. Thus, check Position maintained for the employee in P4002_OBJID, against this position check for Essential Qualification, related object type u2018Qu2019, compare this with the qualifications maintained for the employee in Infotype 0024, and display all qualifications for which HRPE_PROFQ_ESSENTIAL is not maintained.)
16. Proficiency (HRPE_PROFQ_PROFC_TEXT)
in clear :
1. Positions (Object Type S) are linked to Job through relationship A 007
2. In APDISCOM scenario, Qualifications (Object Type Q) are attached to Object u2018Jobu2019 (Object Type C) through Transaction Code PPPM
3. Now, for a Job there can two types of qualifications maintained Essential Qualifications (ii) Additional Qualifications
4. For essential qualifications: Against a Qualification we can maintain u201Cessential check boxu201D HRPE_PROFQ
5. For additional qualifications: Those qualifications for which HRPE_PROFQ is not maintained
6. Now, for an applicant, Qualifications are maintained in Infotype 0024, wherein the necessary qualifications would be selected.
7. In the report for field of u201Cessential qualificationu201D, check for qualifications maintained in Infotype 0024 and compare it with qualifications maintained in Job (through Position assigned to the applicant in P4002_OBJID)
8. Check for essential qualification HRPE_PROFQ maintained in Job and check whether the same Q is maintained in Infotype 0024 for the applicant, if yes, then generated Text of the Q
9. If there are any additional qualifications which are maintained in the job and not maintained in Infotype 0024, DONu2019T GENERATE ANYTHING IN FIELD
10. If there are any additional qualifications which are maintained in the job and if same are maintained in Infotype 0024, generate Q text under field of u201CAdditional Qualificationsu201D in the report
11. If there are any extra qualifications in infotype 0024, which are not maintained in Job, then generate Q text under field of u201CAdditional Qualificationsu201D in the report
Please provide the procedure.(For clarity copy and paste the text in a MS-word)
Please reply ASAP.
Regards,
Rama.P
Edited by: Rama Chary on Dec 9, 2009 1:28 AM -
From which table and field can I get batch split indicator?
Dear friends,
There is batch split indicator at VL02N screen. From which table and field can I get this indicator?
Thanks regards..Hi,
I dont think there is anythign called batch split indicator.
You can find that there is a batch split in a delivery if LIPS-UECHA field is updated for a particular delivery. If UECHA is filled, then the number means that for the item number mentioned in UECHA, those records are the split records.
i.e. For example say for a line item 10, there are 2 split items in a delivery. In this case, there will be two line items with LIPS-POSNR = 90001 and 90002. These line items will have LIPS-UECHA = 10. This means that the items 90001 and 90002 are the child batch items for the parent line item 10 as mentioned in UECHA field.
btw....u can check LIPS-CHSPL if this is what you are looking for.
I hope this answers your question. If you have any doubt, pls lemme know -
How to get selection screen elements and its table reference of a report ?
halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
screen_tab TYPE STANDARD TABLE OF screen,
wa_screen TYPE screen,
scrn_nm TYPE string,
scrn_leftover TYPE string,
l_type TYPE REF TO cl_abap_typedescr,
typ_nm TYPE string,
typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
IF screen-group3 = 'PAR'
OR screen-group3 = 'LOW'.
APPEND screen TO screen_tab.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
ASSIGN (wa_screen-name) TO <fs_data>.
l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
IF wa_screen-group3 = 'LOW'.
SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
TRANSLATE scrn_nm TO UPPER CASE.
ELSE.
scrn_nm = wa_screen-name.
ENDIF.
SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
WRITE:
/ 'Screen Name: ', scrn_nm,
/ 'DDIC Type: ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
components_table TYPE abap_compdescr_tab,
components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful. -
FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTI
FROM WHICH TABLE I CAN FIND GL ACCOUNT NUMBER AND COMPANY CODE OF A PARTICULAR CUSTOMER?..I AM TRYING TO POST AN IDOC ..SO DATA HAS TO BE PROPER.JUST TELL THE SOLUTION
Hi rendeep,
1. LFB1
this is the required table.
2. field is AKONT
3. The account number can be different
for different companies.,
hence it depnds upon combination of
LIFNR
BUKRS
regards,
amit m. -
From which table I can find the "Class type" and "Class" of the material?
From which table I can find the "Class type" and "Class" of the material?
Thanks in advance for the answers....Hi,
try following table
KSSK Material number to class
KLAS Class description
KSML Characteristic name
CABN/CABNT Characteristic name description
CAWN/CAWNT Characteristic name
[http://www.sap-img.com/materials/classification-view-of-material-master.htm]
[http://wiki.sdn.sap.com/wiki/display/ERPLO/FrequentlyUsedTables]
Regards
kailas Ugale -
From which tables i would find the delivery and billing document field..??
I need to create an ALV report which displays the following details in the output.
Order No Item No Material Order Qty Item Category Plant Delivery Billing Document Sales Org Dist Channel Division Created By Created On Changed On
For(Order No Item No Material Order Qty Item Category Plant) i took the fields from vbap and
for(Sales Org Dist Channel Division Created By Created On Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PMi am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
BEGIN OF st_vbap,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
pstyv TYPE vbap-pstyv,
kwmeng TYPE vbap-kwmeng,
werks TYPE vbap-werks,
END OF st_vbap,
BEGIN OF st_vbak,
vbeln TYPE vbak-vbeln,
erdat TYPE vbak-erdat,
ernam TYPE vbak-ernam,
vkorg TYPE vbak-vkorg,
vtweg TYPE vbak-vtweg,
spart TYPE vbak-spart,
aedat TYPE vbak-aedat,
END OF st_vbak,
BEGIN OF st_final,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
pstyv TYPE vbap-pstyv,
kwmeng TYPE vbap-kwmeng,
werks TYPE vbap-werks,
erdat TYPE vbak-erdat,
ernam TYPE vbak-ernam,
vkorg TYPE vbak-vkorg,
vtweg TYPE vbak-vtweg,
spart TYPE vbak-spart,
aedat TYPE vbak-aedat,
END OF st_final.
DATA:
lt_vbap TYPE TABLE OF st_vbap,
ls_vbap TYPE st_vbap,
lt_vbak TYPE TABLE OF st_vbak,
ls_vbak TYPE st_vbak,
lt_final TYPE TABLE OF st_final,
ls_final TYPE st_final,
lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_fieldcat TYPE slis_fieldcat_alv,
layout TYPE slis_layout_alv,
lt_sort TYPE slis_t_sortinfo_alv,
ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
'VBELN' TEXT-002,
'POSNR' TEXT-003,
'MATNR' TEXT-004,
'KWMENG' TEXT-005,
'PSTYV' TEXT-006,
'WERKS' TEXT-007,
'VKORG' TEXT-008,
'VTWEG' TEXT-009,
'SPART' TEXT-010,
'ERNAM' TEXT-011,
'ERDAT' TEXT-012,
'AEDAT' TEXT-013.
PERFORM display.
*& Form SELECT_DATA
text
FORM select_data.
SELECT
vbeln
vkorg
vtweg
spart
ernam
erdat
aedat
INTO CORRESPONDING FIELDS OF TABLE lt_vbak
FROM vbak
WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
SORT lt_vbak by vbeln.
ENDIF.
SELECT
vbeln
posnr
matnr
kwmeng
pstyv
werks
INTO CORRESPONDING FIELDS OF TABLE lt_vbap
FROM vbap
FOR ALL ENTRIES IN lt_vbak
WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
SORT lt_vbap by vbeln.
ENDIF.
ENDFORM. "SELECT_DATA
*& Form LOOP_FINAL
text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
ls_final-vbeln = ls_vbap-vbeln.
ls_final-posnr = ls_vbap-posnr.
ls_final-matnr = ls_vbap-matnr.
ls_final-kwmeng = ls_vbap-kwmeng.
ls_final-pstyv = ls_vbap-pstyv.
ls_final-werks = ls_vbap-werks.
READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
ls_final-vkorg = ls_vbak-vkorg.
ls_final-vtweg = ls_vbak-vtweg.
ls_final-spart = ls_vbak-spart.
ls_final-ernam = ls_vbak-ernam.
ls_final-erdat = ls_vbak-erdat.
ls_final-aedat = ls_vbak-aedat.
APPEND ls_final TO lt_final.
CLEAR ls_final.
ENDLOOP.
ENDFORM. "LOOP_FINAL
*& Form SORT
text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM. "SORT
*& Form A
text
-->FNAME text
-->SELTEXT text
-->EMPHA text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM. "A
*& Form ALV
text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
is_layout = layout
it_fieldcat = lt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = lt_sort
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = C_X
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = lt_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "ALV -
From which table can I display PGI (material and quantity)for a spesific cu
Dear gurus,
From which table can I display PGI (material and quantity)for a spesific customer order?
Thanks in advanceHI
PGI and material quantity can be available in MSEG table
for this enter the sales order number in KDAUF or* MAT_KDAUF* fields in MSEG table
Also try with LIPS delivery item table and LIKP table
regards
SAP SD
Edited by: sapkpit_sd on Jul 22, 2010 8:14 AM
Maybe you are looking for
-
How much RAM can my Pavilion DV6 support with Windows 7 64 bit?
I currently have 8GB RAM and hoping to upgrade to 32GB but it looks as if I can only have 16GB?
-
I just purchased a Yamaha 1500 a/v receiver and hooked it up to my dual G5 with a monster toslink cable. I can get audio if i play the dvd in DD 5.1 using DVD Player, but i get no sound when trying to use DTS.... what gives? I was hoping to be able t
-
STZBC table need to be updated correctly for DST Brazil Change.
Hi All, STZBC table need to be updated correctly for DST Brazil Change. I see two options to change it: 1) Create a new line for 2009 in STZBC -> Variable time zone rule in DT1 and create the transport 2) Apply SAP Note 198411 (
-
Using field-symbols in dynamic structure
Hi, experts. See if you can help me: in version 4.6C and 6.00 a structure has changed its name - from BAPIOIL2017_GM_ITM_CRTE_P to BAPIOIL2017_GM_ITM_CRTE_PARAM. Now I have to change a report that uses this structure and find <b>a way to make it work
-
I need to pass 10 records to a script using one perform.
Hi Experts, Right now I am calling perform 10 times to print 10 invoices in the window. Can any one help me to get 10 records by calling perform one time. Points will be given. Need urgent Thanks