From which table snpRef.getInfo picks values

hi,
I want to know from which table these value comes
<?=snpRef.getInfo("DEST_DSERV_NAME") ?> and
if the session is manually restarted after correcting the DBLINK related to the target DB why it picks the previous values . I want to know all the steps related to a sessions are stored some where for next restart if any error caused.
regards,
palash

Thanks JONT,
I got it, actually my question was when a particular job failed due to DBLINK name of the target Db definition during sqlldr call from jython script of Oracle IKM control append , after correcting the same if we "RESTART" the job again from
Operator why it is picking the previous errorneous value .
I was taking about the task those are picked by the restarting the session
regards,
Palash

Similar Messages

How to check from which table data is picking by datasource 0CDCY_ACT_ATTR

Hi Experts,
Could you please help me in finding out of the table from which datasource 0CDCY_ACT_ATTR is extracting.
As per my knowledge is should be extract from tables(infotypes) HRP5135 - 5141.If i am wrong please correct me.
Issue : My extractor(0cdcy_ACT_ATTR) is bringing wrong ACT_TYPE (Eg :5010) where as in table HRP5141 for that particular OBJID it is 9180( different).
Please help me why my extractor is bringing ACT_TYPE 5010.
This standard datasource and using Function Module : RCF_BIW_GET_ACTIVITY, How can i check from which table it is picking the data
Thanks in Advanve
Sree

Hi Sree,
In RSA3 on the first screen, you have the option to start debugging by marking the debug check box, once you put all the selections, click on execute and it will go to debug mode, then keep on pressing F5. It will debug your code line by line, then you can check for all the select statements.
Or once the debugging is started you will have the option to put break point on all the select statements in one shot, you can get in touch with your ABAP team.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 24, 2011 8:20 PM

From which table Gross amount can be picked

Hi,
From which tables the gross amount of line item of sales order can be picked.
Please give me the table names to fetch gross amount.
Regards,
Krishna

Hi,
Select the condition record number from VBAP i.e. KNUMH and pass this condition record number and condition type PR00 (Ctype PR00 is for gross value kindly check ) to KONV . in KONV KBETR would give the value .
Regards,
Raghavendra

From which table I can get Vendor characteristic values ?

Hi Everybody,
From Which table I can get <b>Vendor Characteristic values from Vendor classification ?</b>
Thanks & Regards,
Nagaraju Maddi

Hi
Check the Tables
CABN and AUSP
or use the following
Use the following BAPI's:
BAPI_OBJCL_GETDETAIL
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS.
Reward points for useful Answers
Regards
Anji

From which table is the support desk message picked?

Hi Experts,
In CRM_DNO_MONITOR tcode, i want to know from where support desk message number picking from(from which table).i want where this support desk message number(number range) is maintained in SPRO.
steps i'm working out:
I'm executing CRN_DNO_MONITOR tcode with transaction number, after executing i double click on the details where it will display the details. Going to <b>business transaction</b> and click on create where it will display create business transaction options. Select <b>Support Desk Message</b> and click on create.
In the very next screen, it will display the support desk message number. I want to know from where this support desk message number is picking(table name or settings in spro).
Thanks,
Pawan

Hey pavan,
The tcode for number range maintancance is crmc_nr_ra_service.
Every number range has some number like 01, 02 03 assigned to it..
TO find out which number range your transaction type is using go to : Spro->Customer relationship managemnt->transaction type-> Selct the desired transac tion type and click on details:::
There you can find the number range assignment in field internal number range...
Revert for ny clarifications and plz do forget to reward if this post was usefull..

From which table the ship to address is picked up in SRM

Hi,
Can anyone tell me From which table the ship to address is picked up in SRM?
BR
Sairam

Hi,
See the foll related thread:
Table name for - ship to address.
BR,
Disha.
<b>Pls reward points for useful answers.</b>

From which table we can get cat_guid depending upon the guid of a tr.ticket

Hi Experts,
I have to find the cat_guid depending upon the guid which is in crmd_orderadm_h table to retrive the fields categeorization module/element/type maintained in the service ticket.
Please tell me from which table we can get cat_guid depending upon the guid of perticular trouble ticket.
points will be rewarded if helpful.
regards,
Ezal

Hi Ezal
Pass the GUID (CRMD_ORDERADM_H) to Function Module CRM_ORDER_READ to retrieve the required values.
I think this should do the trick.
Reward with points if helpful
Regards
Arden

How to find from which table we got the data

Hi friends ,
How can we find from which table we r getting data in the datasource.
I am getting data from crm system.based on that we created cubes and dsos.
we have only one datasource.now i need to know from which table we pull the data?
can any one give the procedure
Thanks in advance........
sridath

Hi,
Datasource / tables in the source system
Go to RSA2 (DS Repository) in your source system and display your source system.
If Extraction Method is 'V' - you are lucky and you see table name where data is taken from.
If it is F* - function module is used, and you have to go thru its code to see all the tables it uses and logic how data is
processed.
Ext. Meth   Short text
V                 Transparent Table or DB View
D                  Fixed Domain Value
F1                Function Module (Complete Interface)
F2                Function Module (Simple Interface)
Q                 Extraction Using ABAP Query
A                 DataSource Append
OR
Since you have the extract structure and the extractor, you must have some transaction like the Extractor Checker RSA3. If so
then execute ST05, switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Hope this helps.
Thanks,
JituK

Which table contains net book value for Assets created with AS91.

Which table contains net book value for Assets created with AS91.
I have a problem locating where the net book value is stored in SAP. Is it simply calculated and not stored in any one place? I am trying to predict how SAP will calculate the net book value for some assets we plan on converting, but my formula doesn't always work consistently and I have not idea what is going on. If it is stored in a table some place, can anyone please let me know!
Thank you all

Hi anar.samadzade & Michael Stewart
It is not possible to directly get net book value of an any Table. You must migrate the gross book value (acquisition cost) and the accumulated depreciation. SAP will then calculate the NBV.
Gross Block & Accumulate Dep you will get from Table: ANLC
http://fixedassetsaccounting.net/migrating-fixed-assets-into-sap-a-harlex-guide/
Dear anar.samadzade Ask Questions politely
Regards
Viswa

From which tables i would find the delivery and billing document field..??

I need to create an ALV report which displays the following details in the output.
Order No Item No     Material     Order Qty     Item Category     Plant     Delivery     Billing Document     Sales Org     Dist Channel     Division     Created By     Created On      Changed On
For(Order No Item No     Material     Order Qty     Item Category     Plant) i took the fields from vbap and
for(Sales Org     Dist Channel     Division     Created By     Created On      Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

i am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
        BEGIN OF st_vbap,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
        END OF st_vbap,
        BEGIN OF st_vbak,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
          ernam TYPE vbak-ernam,
          vkorg TYPE vbak-vkorg,
          vtweg TYPE vbak-vtweg,
          spart TYPE vbak-spart,
          aedat TYPE vbak-aedat,
        END OF st_vbak,
       BEGIN OF st_final,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
         erdat TYPE vbak-erdat,
         ernam TYPE vbak-ernam,
         vkorg TYPE vbak-vkorg,
         vtweg TYPE vbak-vtweg,
         spart TYPE vbak-spart,
         aedat TYPE vbak-aedat,
       END OF st_final.
DATA:
      lt_vbap TYPE TABLE OF st_vbap,
      ls_vbap TYPE st_vbap,
      lt_vbak TYPE TABLE OF st_vbak,
      ls_vbak TYPE st_vbak,
      lt_final TYPE TABLE OF st_final,
      ls_final TYPE st_final,
      lt_fieldcat TYPE slis_t_fieldcat_alv,
      ls_fieldcat TYPE slis_fieldcat_alv,
      layout TYPE slis_layout_alv,
      lt_sort TYPE slis_t_sortinfo_alv,
      ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
                s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
      'VBELN' TEXT-002,
      'POSNR' TEXT-003,
      'MATNR' TEXT-004,
      'KWMENG' TEXT-005,
      'PSTYV' TEXT-006,
      'WERKS' TEXT-007,
      'VKORG' TEXT-008,
      'VTWEG' TEXT-009,
      'SPART' TEXT-010,
      'ERNAM' TEXT-011,
      'ERDAT' TEXT-012,
      'AEDAT' TEXT-013.
PERFORM display.
*&      Form SELECT_DATA
      text
FORM select_data.
SELECT
   vbeln
   vkorg
   vtweg
   spart
   ernam
   erdat
   aedat
   INTO CORRESPONDING FIELDS OF TABLE lt_vbak
   FROM vbak
   WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
    SORT lt_vbak by vbeln.
ENDIF.
SELECT
   vbeln
   posnr
   matnr
   kwmeng
   pstyv
   werks
   INTO CORRESPONDING FIELDS OF TABLE lt_vbap
   FROM vbap
   FOR ALL ENTRIES IN lt_vbak
   WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
    SORT lt_vbap by vbeln.
ENDIF.
ENDFORM.                    "SELECT_DATA
*&      Form LOOP_FINAL
      text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
    ls_final-vbeln = ls_vbap-vbeln.
    ls_final-posnr = ls_vbap-posnr.
    ls_final-matnr = ls_vbap-matnr.
    ls_final-kwmeng = ls_vbap-kwmeng.
    ls_final-pstyv = ls_vbap-pstyv.
    ls_final-werks = ls_vbap-werks.
    READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
    ls_final-vkorg = ls_vbak-vkorg.
    ls_final-vtweg = ls_vbak-vtweg.
    ls_final-spart = ls_vbak-spart.
    ls_final-ernam = ls_vbak-ernam.
    ls_final-erdat = ls_vbak-erdat.
    ls_final-aedat = ls_vbak-aedat.
    APPEND ls_final TO lt_final.
    CLEAR ls_final.
ENDLOOP.
ENDFORM.                    "LOOP_FINAL
*&      Form SORT
      text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM.                    "SORT
*&      Form A
      text
     -->FNAME      text
     -->SELTEXT    text
     -->EMPHA      text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
    ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM.                    "A
*&      Form ALV
      text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
    is_layout                         = layout
    it_fieldcat                       = lt_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = lt_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = C_X
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
    t_outtab                          = lt_final
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ALV

From which table feed back partner and root cause partner

hi,
can any body tell me ,from which table feed back partner and root cause partner
can be find.
i need to add this in datasource 0crm_sales_act_1.
thanks in advance.
regards,
sridhar M

It is always advsible to use function modules in CRM instead of making direct table access. Unlike R/3, CRM tables and buffering are quite complex.
In your case, to read the values of maintained Sales Areas, use the function module <h5>CRMA_BUPA_GET_SALES_AREAS</h5>
The function module takes the BP Guid (BUT000-PARTNER_GUID)
However you can also find your information in tables<h5>
CRMM_BUT_LNK0011 - BP Sales rule list
CRMM_BUT_LNK0010 - BP Sales rule list
CRMM_BUT_SET0010 - BP Sales rule set</h5>
Hope this helps.
Easwar Ram
http://www.parxlns.com

How to know querry level fields from which tables in the source system

Hi Experts,
let's say we've two fields in the querry e.g: Actual GI Quantity, Actual Value of GI
This fields from PP Querris level how would i know from which table we're getting data is there any easy process to find out please drop your suggestions..
Next doubt is when generate querry e.g. PM Module we don't know exatly what're the available tables & fields technical names but in my currently project using SAP Delivered Infocubes & Querries at the moment & generating querries but when we test in the Portal it's shows some fields '0', X. I've to check in source system weather it's having any values or not.
Can anybody drops your valuable words
Cheers
Suresh

Hi all,
I'm a colleague of Maarten, and I think maybe we didn't explain well enough what we want. So let me try to elaborate:
We want to obtain the reference (within the SOAP-Body of the XI-message) to the attachment which contains the main payload (at least, in XI itself). This reference seems to have gone missing, once our adapter module (after having gone through XI) is entered (and, by the way, before we enter the SOAP-receiver-adapter).
The JAVA-representation of the XI-message seems to hide the fact that in XI itself, the main payload is an attachment, referenced from within the SOAP-Body.
Nevertheless, we would like to obtain/retain(?) that reference, in order to put it in our own to-be-created-additional-attachment, which would go (via the PayloadSwapBean-module of SAP) into the SOAP-body of the final SOAP-call, and should then reference the 'new attachment' (which was (in XI itself) the main payload).
So, I think both answers (up to now) don't help us much (however: thanks for your reaction anyway of course).
So, maybe someone has another idea?
Regards, Fred

Find out from which table a ES gets his data

Hello,
I'm now asking myself (for a couple of hours) how I can find out from which table(s) a Enterprise Service gets his data. I don't find any hint about this on ES Workplace, sproxy or soamanager. Has anyone a usefull hint for me?

Hi Marco,
This actually is an excellent question, as it allows to clearly realize, that ES Repository is only a modeling device and it does not contain any implementation details.
If you are interested in implementation details, then Services Registry and the respective backend system are your friends, as Enterprise Services are implemented in these backend systems and then published in the central phone book - the Services Registry.
If you haven't applied yet for the free access to the ES Workplace systems, do so as this will give you access to the SAP ERP discovery system that implements all the ECC related Enterprise Services.
Now, if you want to see the implementation details for a given service - start from the ES Workplace. Go to the Services Registry and find an ECC service of interest. Then, on the General tab of the service you will find the Namespace and Internal Name. Having these two values, log on to the ES Workplace ECC system, start transaction SE80 and select Enterprise Services Browser. If this option is not available, go to Menu -> Utilities -> Settings and select Enterprise Service Browser. Find the namespace and the service (by its internal name) then navigate to the implementing code - which typically is an ABAP Object interface and an implementing class.
The only reason I am referring to the ES Workplace Service Registry and its discovery system is, because it is a platform we all have access to. Each client builds their own SOA landscape, where only certain Enterprise Services are published in the Services Registry. And, of course, the system landscape can be more complex - containing not only ECC but other SAP Business Suite products.
I hope this helps a bit.
Regards,
Andrzej

From which table ,i ll get both the invoice and cleared amount ???

Hi Friends,
i am making a report for my sales client where finance part is also required.
the requirement is : the sales people want know the status of the invoice generated at their end.the report shud be like if they enter the invoice no,fiscal year and coustomer they will be able to see the status of the invoice.how much pmt has received for that particular invoice,wheather it is open or fully cleared?
From which table i can get both invoice no. and the payment/pmts rerceived against that invoce/invoices.
plz guide.
Regards,
Biswa

Hi,
SAP Standard Report itself covers all the requirements mentioned. With FBL5N, we get to know how much has been invoiced, paid and cleared and how much advance has been paid by customer etc., in one screen. Apart from this we have also all signs which show, which all invoices are due, overdue and its easy to analyse as well.
Was this requirement given by client after seeing this standard report?
Hope this info is helpful.
Regards,
Venkat

Logical System(ORGLOGSY) populating from which table in R/3 system

Hi Friends,
I would like to understand about the Logical System(ORGLOGSY) from which table or from where this logical system being populating.
Because we could see this fields Logical System(ORGLOGSY) exist in PO item, HDR, SGR data sources.
Can anybody give some idea, how we'll get this source system logical system name into BW system.
SIRI

Hi Siri,
Check here
V_TBDLS
TX: RSA13----->Tools -
>assigment of source system to source system id
hope this will help you.
Thanks,
Vijay.

From which table snpRef.getInfo picks values

Similar Messages

Maybe you are looking for