Front audio port not working please help..
Hey guys,
My HP Pavilion DV2275ea front audio jack does not work, I have tried many different headsets as the mic jack works just fine. I have tried reinstalling audio drivers (Conexant High-Definition Audio Chip) and still nothing. I have look at the support advice posted to no avail. Is there anything else i could try?
A friend said it could be turned off in the bios but i am not able to get in as i don't know the password for the phoenix bios, could this be true?
Any help will be greatly appreciated
Well from looking at a jpeg of your board the front usb headers are laid out just like my board. Each set of headers support 2 usb ports each. That gives you the 4 in the rear and 4 for the front.
Now as to the pinouts, 1+3+5+7+9 is 1 set and 2+4+6+8+10 is the 2nd set, with pins 1 and 2 being the 5V power pins. Pins 7 and 8 are your grounds. 3 and 4 are the usbo- and usb1-. Pins 5 and 6 are usbo+ and usb1+. Pin 9 is the "key" pin and may actually be missing by intention. Key 10 is sometimes called the usboc pin and normally isn't used. On some boards you don't want anything connected to pin 10, even if you have to snip the wire going to it and terminate the end of the wire with insulating tape.
Your motherboard manual should show you the pin layout.
Similar Messages
-
TS5150 Audio is not working, please help!
my apple television is connecting with my computer (air play) but I cannot hear the audio when trying to watch televisions from my computer.
The first audio book I downloaded works now but no matter what I try the other one wont work it just keeps going back to the menu when i try to play it.
I've tried putting it on a new playlist and even that doesn't work.
HELP!
Niki -
Audio Interface not working Please Help
I have been using Logic express with no problems with my Tascam us-122 audio interface , I recently downloaded a program for firefox to be able to capture webpage-video i.e. You-tube etc, and now I cannot get sound out of my interface, even after trying to unistall that program and reinstall my interface driver
Please help, many thanksHello,
"and now I cannot get sound out of my interface, even after trying to unistall that program and reinstall my interface driver"
Try using AppZapper: http://www.apple.com/downloads/macosx/systemdiskutilities/appzapper.html
This way you make sure you have UNinstalled all the associated files.
Carolyn -
Front JUSB1&2 NOT WORKING - Please Help
I'm in the middle of a new build and everything is fine except....
I Can't seem to get Jusb1 & 2 pin sockets to work on KT6V-LSR M/B.
Rear hardwired USB's are working fine, is there something in the Bios i've missed?
I'm trying to connect up an internal 3.5" Multi Card Reader, using USB 2.0.
The cable is a four pin (5v, Data+, Data- and Ground). I have tried JUSB1 & 2, pins 1-7 and 2-8 (as per M/B book)
I'm using Windows XP (SP2) and the reader is plug and play, but nothing is happening not even a power light.
Thanks in advance for all your replies
DjtomWell from looking at a jpeg of your board the front usb headers are laid out just like my board. Each set of headers support 2 usb ports each. That gives you the 4 in the rear and 4 for the front.
Now as to the pinouts, 1+3+5+7+9 is 1 set and 2+4+6+8+10 is the 2nd set, with pins 1 and 2 being the 5V power pins. Pins 7 and 8 are your grounds. 3 and 4 are the usbo- and usb1-. Pins 5 and 6 are usbo+ and usb1+. Pin 9 is the "key" pin and may actually be missing by intention. Key 10 is sometimes called the usboc pin and normally isn't used. On some boards you don't want anything connected to pin 10, even if you have to snip the wire going to it and terminate the end of the wire with insulating tape.
Your motherboard manual should show you the pin layout. -
AS2 Site Audio Links Not Working, Please Help!
I have built a site for a client using AS2 which contains links to streaming mp3s. The audio loads and runs just fine in Safari but malfuntions/doesn't even play in other browsers.
Here is the site in question: labbatomarco.com
I'm hoping that one of you lovely gurus out there can help me resolve this problem. If needed, I can supply the .fla.
Thanks in advance- Nicoleyou have faulty swf embedding code. publish an html file form flash, upload that and retest.
-
Audio Links Not Working, Please Help!
I have built a site for a client using AS2 which contains links to streaming mp3s. The audio loads and runs just fine in Safari but malfuntions/doesn't even play in other browsers.
Here is the site in question: labbatomarco.com
I'm hoping that one of you lovely gurus out there can help me resolve this problem. If needed, I can supply the .fla.
Thanks in advance- Nicoleyou have faulty swf embedding code. publish an html file form flash, upload that and retest.
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report".
Maybe you are looking for
-
HP Compaq nx6310 Doesn't Recognise Western Digital Hard Drive
Could someone please help me? I have an HP Compaq nx6310 laptop with a corrupted 40Gb HDD. I decided it was best just to replace it. I have purchased a Western Digital WD3200BEVT 320Gb HDD. I have the OEM OS disk which I also had to purchase from H
-
HT201335 how to stream web content to apple tv
how do you stream web content over apple tv?
-
How to automatically capture thumbnail image of flash video
I'm creating a sample website where users can upload videos in various formats, including flash. Most flash oriented sites that allow automated content also display videos in image form, so you can get a general sense of what you're about to watch. I
-
As in R/3 field EKPO-BSTAE is there any similar field in SRM
As in R/3 field BSTAE is there any similar field in SRM
-
ORA-03115 when connect to Oracle8.0.5.1 on Linux
My JDeveloper with JDBC(upgraded today) connects OK to Oracle8 on NT and SUN. But there is error with Oracle8 for Linux. What's wrong? null