FS10n_line item dispaly

Hi
I want to dipaly "jurisdiction code" in a line item. but, when I went to layout to select the jurisdiction code I could find the filed name in the layout options.
Where to set up this filed inorder to dipaly it in the layout list.
Appreciate your help.
Thanks

Goto O7F8 as Srikkanth said or goto OBVU & add the table BSEG & field TXJCD. Once you save the changes properly as a workbench request, you should be able to see that field in FS10n report.
Award points if useful...
Thanks
Morgan

Similar Messages

Change line item status at table level & also in transaction.

Hello,
I want to change the status of line item in CRM service order at table level. This change should reflect in transaction too.
Ex. Order X is in release state. When i run my program for line item 10 with enabling a check box in the selection screen, then the line item status shd be changed to "complete".
Table to change status is CRM_JCDS. Kindly send sample code on how to change the status in order through pgm.
Regards
Devika.S

Hi Nikhil
Open item management tick checked in GL master as we have run the program FAGL_SWITCH_TO_OPEN_ITEM .
Also GL shows the line item dispaly as RFSEPA01 had been executed.
However FAGLL03 shows all the old line item as posted status -we are looking for option have the status of all the old
line item as open item indicatior(in red) there by we can have the option to select all the item to process open item in F-03.
Appreciate for an amicable solution on this.
Regards
subrata

GL Account Line Item Display

Hi,
While creating a GL Account Master, 'Line Item Display' was accidently not activated, under the Control Data Tab. This was subsequently done by editing the GL Masters after postings had already been made for about two months. Thus for the period, Line Item Management was not activated, the report generated thru FAGLL03 does not give the detailed line items.
Could any one pleaase advise the T Codes to run the program for the conversion of the table such that the line items are displayed also for the period prior to the activation of Line Item Management.
Thanks in advance.

Hi follow the below transactions,
select teh line item dispaly & save the gl account
1.First you block the gl account for posting
2.Go to SE38 &execute the program RFSEPA01.
system will shoe the line items which are posted without lineitem nmanagemnt.
then unblock the gl account.
chandra
Edited by: Chandra Sekhar Reddy.Botla on Jan 3, 2008 1:17 PM

Customer /Vendor line item..

Hi..
One query..for line item display of GL account we select in GL master "line item display"
but for customer and vendor line item display in FBL1N & FBL5N...from where we tick the line item dispaly .
Please reply

Dear expert
For each vendor account, the system notes which line items have been posted to the account. You can specify the sort sequence of the line items by entering a key in the Sort key field within the account master record. This key specifies how the Allocation field is to be filled in the line items posted to the vendor account. When you call up the line item display, the system sorts the line items according to the contents of the field. You can change the sort sequence in the line item display.
Please refer below link
http://help.sap.com/saphelp_40b/helpdata/en/01/a9b6aa455711d182b40000e829fbfe/content.htm
Regards
Ajeesh.s

Conditional Display of A region based on a Search condition

Hello All,
I would really appreciate any suggestion and pointers on how to achieve the below.
My requirement is to display a tabulated result based on a search condition.
I have two regions. One region contains the items to enable a search and the other region will be used to display the search results.
Region A is an HTML region containing three items
1.     A text field: to enter the search text
2.     A list field: to determine the type of entity to search (customer_id, invoice number, Passport No)
3.     A button: to initiate the search process.
Region B is a reports region displaying the search results
My question is:
1.     Is basing the source of the region as a “PL/SQL function returning a select statement” the ideal choice. I will have variable “WHERE” clauses based on the search criteria entered in region A. However, the columns returned will always be the same
2.     How do we get the region B to display only when there are results returned from the search results
3.     How do we base by result set based on a stored procedure in the database. Basically as an API. We pass in the parameters and the API passes the result set back to APEX. This way, I can have all the DML hidden behind the stored procedures
Looking forward to your comments and suggestions
Pravind

Hello,
See the below link
Re: item dispaly conditionally
Regards,
Shijesh

Vertical line issue in SAP Script main window

Hi All,
I want to draw a vertical line in my main window in SAP Script output.
But problem is in main window i am printing some texts at the beggining then i am printing line items.
So this is not fixed line (box). It may increase/decrease based on text available before line items.
How can i manage this prining vertival line as i don't know height, top of this line!
Thanks in advance.
Thanks,
Deep.

Hai Deep,
Use Elements as suggested by Kodarapu.
Now goto Paragraph Formats create a format for Item lines.
ex.
Name Paragraph Format as 'IL' Now click on the Push Button "Tabs" on bottom Right.
now in "Tab Position" enter the spacing that you need for your item dispaly
ex.
Number     Tab position       Alignment
1               6.00   CH          LEFT
2               25.00 CH         LEFT
3               54.00 CH         LEFT
The above example is for 3 items
Now in your Script Windows-> Main
do the following.
/E           ITEM_LINE_A
IL           &EKPO-EBELP&,,&EKPO-EMATN&,,,,&EKPO-TXZ01&
Hope it SOlves your Issue.
Cheers,
Suvendu

Tables selection for out put

Hi All,
I have some problem in line items dispaly .
In my report i am selecting data from BSAS and BSIS tables using some radiobuttons.
but in my specification mentioned BSID-fields ,line Items as reference fields to be dispalyed.
means i am taking data from BSAS and BSIS tables ,but we need to display BSID table,
Can you any help on this issues ,how to do coding..in ALV grid layout..
Thanks,
Sridhar

Hi,
Please go through the blog updated by me for the automatic creation of ALV.
http://theguruspeaksaboutsap.blogspot.com/2007/07/automatic-creation-of-alv-reports.html
Reward if helpful.
Regards,
Harini.S

FBL3N : GL Account description

Hi Gurus
I have a problem whereby I need to have GL Account description in every Line Item Display through Tcode FBL3N.
As per the requirements from user we need to have GL account description in every line item.
Please help me .
Suitable answer will be rewarded.
Ramesh

Hi
I know that for running FBL3N i need to give GL account and company code .
The problem is that on ethis Tcode is executed , I can see the Gl Line Item Dispaly .
In that list I want the for every Line item I should get the GL Number and the GL description . I am getting the GLaccount number in each line item but not the GL account description.
Please suggest me how I acn get this description in each line item.
Thanks
Ramesh

FBL5N : Adding additional field PERNR to layout

Hi experts,
I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
I had added pernr- personnel number by following the path
SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
here i added bseg - pernr
after adding , in FBL5N layout the field is appearing , but it is displaying blank in output .
Is there any thing needs to be done to display additional field in output of FBL5N.
kindly give me any suggestions.
thanks & tregards,
Raghul
Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

Hi,
FBL5N: customer line item display.
BSEG-PERNR: personnel number.
Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
If there is no personnel number given during posting (why should it?) the field added to the FBL5N-layout will be empty.
Best regards, Christian

Working with Standaard Report

hi ABAPERS,
i have a query,
there is a TCODE FBL5N (Customer Line Item Dispaly),
there i have to pick two fields Reference key1(XREF1)
& Reference Key2(XREF2)...
and i need to place them in FD10NA (Customer Balance Display) TCODE....
is it possible to make the changes,
thanks& regards,
kcc

hi,
look here: <a href="http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7aab43c211d182b30000e829fbfe/frameset.htm">SAP List Viewer</a>
and...
1) <a href="http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7b8843c211d182b30000e829fbfe/frameset.htm">Choosing Layouts</a>
2)
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7b1343c211d182b30000e829fbfe/frameset.htm">Creating Subtotals</a>
regards Andreas

T400's Vertical line issue

I'm not sure how Lenovo doesn't have recalls yet but in our company we have T430's T440's and T450's that have a vertical line on the LCD screen. Almost everyday we have 1-2 laptops with this issue. What's even worse is we purchased some T440p's last year and for some reason they were only under warranty for a year and not 3 years and now one of the laptops T440p ran out of warranty as of 7/20/2015 and it's having this Vertical line issue. What is one suppose to do in a situation like this? It's fairly a new computer. We've had this issue on brand new machines out of the box. How is lenovo not getting sued for this problem?

Hai Deep,
Use Elements as suggested by Kodarapu.
Now goto Paragraph Formats create a format for Item lines.
ex.
Name Paragraph Format as 'IL' Now click on the Push Button "Tabs" on bottom Right.
now in "Tab Position" enter the spacing that you need for your item dispaly
ex.
Number     Tab position       Alignment
1               6.00   CH          LEFT
2               25.00 CH         LEFT
3               54.00 CH         LEFT
The above example is for 3 items
Now in your Script Windows-> Main
do the following.
/E           ITEM_LINE_A
IL           &EKPO-EBELP&,,&EKPO-EMATN&,,,,&EKPO-TXZ01&
Hope it SOlves your Issue.
Cheers,
Suvendu

P35 NEO2 FIR voltage

Is it possible to change voltage (cpu, fsb, pci-e, chipset) through bios menu?
Thx in advance.

Quote from: Frankenputer on 20-August-07, 22:16:28
According to your manual, no.
Exactly. Here it is straight from the manual:
CPU Voltage / Momory Voltage / VTT FSB Voltage / NB Voltage / SB I/O
Power / SB Core Power
These items dispaly the power status of CPU, Memory, FSB and chipset. Read-only.

Unable to dispaly selected item in option button

I am having problem with jsp code given below:
1. When user first time render this page , he is able to view all the options which is already stored in vector except "Selezionare provincia"
2. Now if user selects say "provincia2" ,the value selected for "Selezionare provincia" is also get stored in session
3. There are also some more items on the page to select but i am showing you the specific one
4. So suppose if user forget to fill up other data , the exception is thrown on same page,and for that event the value stored in session for "Selezionare provincia" (in our case its "provincia2") is not get displayed as selected value for that list.
5. which means that , when that list is get populated for second time form vector , the stored value should be dispalyed as selected value.
6. i was trying to put my logic by using some flag variable but its not working
7. The value stored in vector are provincia1,provincia2,provincia3
<select size="1" id="SelProvincia" name="SelProvincia" class="w170" tabindex="<%=index++ %>">
<option value="" "<%=select%>">Selezionare provincia</option>
<%
Vector<Provincia> proList=new Vector<Provincia>();
Provincia provencia;
proList=GestoreSessioneIdentificazioneCittadino.getElencoProvincia(request);
for (Enumeration e = proList.elements(); e.hasMoreElements();)
provencia=(Provincia)e.nextElement();
if(flag==0)
select="";
if(provencia.getNome().equals("provincia2"))
select="selected";
flag=0;
break;
%>
<option value="<%=provencia.getNome()%>" "<%=select%>"><%=provencia.getNome()%></option>
<%
%>
</select>

I'm having the exact same problem! I've never had this problem before. Does anyone have a solution??

How to dispaly items of Particular Sorder of IT into single row in alv dis?

Hi,
Experts,
I have an Sales order internal table along with its corresponding items
i want to display those items in side by side in alv display.
Ex:
Vbeln   posnr   netwr    waerk
56800   10       21.00    Col
56800   20
56800   30
56800   40
I want to display:
Vbeln   posnr posnr2 posnr3 posnr4 netwr    waerk
56800   10       20        30       40       21.00    Col
I have added columns how can pull data into particular columns .How can i achieve this if any idea or input or suggestions please far word to me.
Thank You,
Shabeer ahmed.

Hi,
Using basic report you can do like this:
DATA: BEGIN OF itab occurs 0,
sku(10) TYPE c,
month(2) TYPE n,
qty(2) TYPE n,
END OF itab.
itab-sku = 'AA'.
itab-month = '01'.
itab-qty = 10.
APPEND ITAB.
itab-sku = 'AA'. itab-month = 02. itab-qty = 20. APPEND ITAB.
itab-sku = 'AA'. itab-month = 03. itab-qty = 20. APPEND ITAB.
itab-sku = 'BB'. itab-month = 01. itab-qty = 20. APPEND ITAB.
itab-sku = 'BB'. itab-month = 02. itab-qty = 40. APPEND ITAB.
itab-sku = 'CC'. itab-month = 02. itab-qty = 50. APPEND ITAB.
itab-sku = 'CC'. itab-month = 03. itab-qty = 10. APPEND ITAB.
itab-sku = 'CC'. itab-month = 04. itab-qty = 20. APPEND ITAB.
PERFORM LIST.
FORM LIST.
data: cl like itab-sku.
SKIP TO LINE 3.
LOOP AT ITAB.
if cl <> itab-sku.
write : / itab-sku.
else.
write : ''.
endif.
write : itab-qty.
cl = itab-sku.
ENDLOOP.
ENDFORM.
Regards,
Bhaskar

BADI for dispalying the items at a time in YMB01

Hi,
      I have a requirement in YMB01. After entering the PO in the first screen, in the second screen after entering the delivery text, we get the item details tab in the third screen. if we select some item in that PO, i need to check the item text and have to display a pop up with a text saying that these texts only have header text in PO.
    i have found out an Badi - MB_CHECK_LINE_BADI. if i select a particular item, that item is coming in MSEG structure in that BADI. but it is coming one by one. So i can print a POP up one by one. But I need to disply one pop up with the items having text in it. I dont need to disply the item without header text.
     Displaying pop up is not a big deal .... But displaying a pop up with many items at a time is only my problem.
    Please Help.
Elavarasu.

Have you tried adding your messgae to et_bapireturn structure in check_line method?
Nabheet
Edited by: nabheetmadan09 on Jan 12, 2012 4:57 AM

FS10n_line item dispaly

Similar Messages

Maybe you are looking for