FSB + Other troubles.
I have been having many issues with my new MSI K7T266-Pro-A. Here are my problems:
1) I have a xp1800, with a new badass fan. I have a 420w ps along with a msi geforce2 TI. My average cpu temp is between 100 - 110 f. I have a big server case, so that kinda worries me. But heres the problem when I try to raise the fsb It just goes dead and I have to rejump the bios pin.
2) My ac' 97 sound is really low. I have it wired to my amp, which i have to push high just to get normal sound. I hear many others having this problem, just curious if any1 had a solution.
If you can help on any of these problems you are awsome.
Thanks,
DrcmK
I have 512 ddr, with a cooling cover on it. The fan has a logo on top and thats showing upright so i guess the fans on right side up. I dont know how to check ram timining? I didnt load high performance settings. Any other ideas?
Similar Messages
-
Hi
Could someone please help me!! I have just bought a 32gb touch and it is driving me crazy. When I switch the wifi on it finds all my neighbours connections but does not find my reutor. I use mine for my laptop , playstation 3 and playstation portable without any trouble. How does my ipod touch not even find it.My reutor is nothing fancy and is about 2 years old. Can someone please help me ? Also is that why I cant use the weather option because I cannot connect to the internet.
I appologise if this been asked before.
Many thanksThe previous responder is correct: your router must have a setting for broadcasting its name and you should be able to see it among the list of routers. There is also a setting for the range of IP addresses the router is leasing. Perhaps that range is full and you need to enlarge it? Finally, there may be filters allowing only certain IP addresses or MAC addresses access to the internet. The answer to your problem most likely lies in the router settings and your understanding of them. Have you read the router manual? There is very little you need to do (or can do) on the iPod end to make this work. My iPod has no trouble finding a route to the internet through an unprotected router.
-
[VIA Series] Memtest86 errors indicate other trouble then ram memory?
The mainbord is MSI PM8M2-V(, VIA P4M800,Socket-775)
Can the mainboard give these errors in memtest86 on UBCD ? is i bios that makes trouble? is it the HDD?Well, what errors.
Post your full specs.
On memtest site there's a list of errors. -
Mac OS X Server 10.6.7 update - Time Machine not working and other trouble.
I've upgraded my mid 2010 mac mini server to 10.6.7 with server Combo download.
After installation (without any errors) i've detected this troubleshooting.
Time Machine (backup hd is the 2nd 500GB Hd of mini server) dont work more and
display error message that suggest to verify hard disks (done with no errors detection).
Mac Help display white page.
And if try to install Server Admin Tools, installation utility not recognize system HD and cannot be done.
The mac mini server seems however works and services seems works rights. Can be rebooted without problems.
I've tried to backup the system disk on the second hd with Carbon Copy Cloner without problem and it recognize system disk well.
I've upgraded also two others mac minis (mid 2010) with standard 10.6.7 version (no server) and a macbook and a macbook pro without problems (but i've not tried time machine on them).
Thanks in advance for any help!I know the problems with Time Machine on Mac OS server. In your case: Look at the log files, searching for "backupd", if that tells you anything.
In my case, Time Machine in the last year stopped several times. Occasionally, there was a helpful message in the log files where I could identify a file where it had hung -- typically intermediate build results of Xcode. After excluding or deleting the offending files (where possible), Time Machine ran successfully.
Another situation which has repeatedly occurred is that time machine just hangs and does not progress, and no log entry helps. In 3 such cases what helped was to delete the spotlight index (e.g., with TinkerTool System) and let it rebuild. It took inordinately long (10 hrs) and there were log entries by mdworker that it had difficulty processing files. But when the spotlight index was finally rebuilt, Time Machine worked again.
BTW: I don't need Time Machine to backup the server system, for that I run mirrors etc., but for user files it is most convenient and has helped several times. Thus I have excluded nearly everything but /User/*. -
After update software freezes and other troubles
I installed the latest update from apple little over a week ago. I also started having these issues about the same time:
I`ll just list my problems:
-Firefox, Adobe CS5, Preview, Adobe Reader, iTunes and just about any other program freezes or crashes frequently. Several times a day, even several times a session.
-When I try searching for downloads/updates, updater crashes.
-When I open a pdf I have recently created myself, it shows just fine. When I try to open a pdf I have downloaded, the program crashes (so far I have tried iPhoto, preview and adobe reader). The last time I know* this worked was in late December, around new years.
-My cursor has turned sloppy, dropping objects or just disappearing. This applies to both the mouse and my tablet.
-Everything runs super slow.
I did a full backup and housecleaning routine in mid December, so there is ample space on the disk and everything was working ship-shape until after that download.
It might be coincidence, but at least the dates are matching up.
I have tried to reboot, I have tried to give it a nights rest and I have tried to boot in "safe-mode". So far nothing helps.
Any pointers, suggestions and help at all is deeply appreciated!After reading through the forum I also tried to download and install the 10.6.6 combo, but I am unable to open it. on the plus side: now I get an error code! -10822.
On the down side: I have no idea what this (or any) error code means!
Any tips? -
I have Safari 8.0.5 and have a mac running OS X Yosemite 10.10.3
The issues started when entering a site that required flash. I received a message that I had to upgrade flash and when attempting to upgrade the system crashed. I then tried to uninstall and reinstall and now get the below error, which directs me back to the install site which starts the process all over again and I'm not getting anywhere!!! Please help!!!Hi karis20774009,
To accurately identify the issue, and help us improve the online installer experience, we would really appreciate it if you could do the following for us:
Perform a speed test on your internet connection. There are a myriad of sites that do this, for example, www.speedtest.net,www.speakeasy.net/speedtest, www.dslreports.com/speedtest, and your internet provider may also have a page in their support/help section to do a speedtest.
Goto Location --> ~/Librarly/Logs/Adobe_ADMLogs
Upload the two log files (Adobe_ADM.log and Adobe_GDE.log) using the instructions posted here https://forums.adobe.com/thread/1408375
Reply back to this thread with the results of the download speed test and the URL to the uploaded log files.
In the mean time, the offline installer is posted at Installation problems | Flash Player | Mac page in the 'Still having problems' section should work for you.
Thank you in advance.
Piyush -
EMac won't startup and other troubling issues.
Hi All,
First time posting, so forgive the newbie factor here.
I have an eMac Combo that was manufactired in 2003, ATI Graphics card model. The problems started about a week ago when after a storm, we were unable to connect to the internet using dial-up. The computer was unplugged before the storm, so don't think it was damaged by lightning, but you never know. Anyway, I was trying to resolve the problem yesterday, and I have made things much, much worse.
Firstly, I checked that all my passwords and account info was correct, checked dial-up server - OK, checked phone line and got dial tone with a handset. So narrowing down the possibilities, I ran the OSX Hardware test DVD, all came up fine. When I rebooted, I repaired permissions and restarted, I then noticed the time was wrong, corrected the time. Still with no luck, I tried to set-up another user account, something happened when I did this and I was forced to manually power down the eMac. Upon restarting, I decided to use an existing different user account. I logged out and back in as this user. As soon as i touched the internet connect button, the computer froze. Manually reset, thyen got a message after the white screen with grey apple logo, "You need to restart the computer". I did and got the massage again. The consulted the manual and pressed cmd, opt, p, r during startup. Still got error message. Computer is now dead I fear, however after doing some more research have determined that the battery may be dead. Can anyone please help me out and advise whether the computer may be restored with just a battery replacement? All other help greatly appreciated. Sorry for the long post, but thought the more info, the better help I would get.
DaveThe problem is that I can not start up at all. When
it gets to the white screen apple logo, I get a
message saying that "You need to restart the
computer" in multiple languages with this error
message on the last line "FF:FF:FF:FF:FF:FF". I have
no idea what this error message is. It is proving
difficult to research as well, as I haven't found a
Mac OSX reference to this error yet.
That, as you've been told is a kernel panic. Typically they're hardware-related. Yours seems to have something to do with ethernet. Note that the most common cause of KPs is bad memory, so if you install some new RAM and start having KPs the odds are pretty good that the new RAM is bad.
The basic troubleshooting steps for all hardware KPs is the same: remove the possible causes of the problem. As was pointed out to you, in your case, what you do is to remove the ethernet connection if you just made one, or to make an ethernet connection if you don't have one.
This is driving me crazy.
Wellcome to the joys of hardware troubleshooting. Be glad that you don't need to know about IRQs, DMA channels, and IDE master/slave/cable select nonsense.
I am trying to find Hdd's
that will work on the eMac and most computer shops
are proving to be unhelpful.
Any internal one-third height IDE/ATA100 or 133 (yes, I know, I know, IDE isn't really the same as ATA, but for our purposes it'll do, and any computer store will know what he needs) 3.5" drive will work. Get one which is rated for low power consumption, space in an eMac is tight and high-power-consumption drives will overheat. Your real problem isn't getting the drive, it's opening up the eMac to install it. I REALLY DON'T RECOMMEND that you open an eMac as your first hardware hacking project. Find a professional to do it. If you must open it yourself, there are take-apart instructions available online. Apple used to post them, don't know if they've taken 'em down, or even if they've posted the ones for the newer generation eMacs. Get hold of a take-apart PDF and READ IT CAREFULLY before starting. Be especially careful of the monitor, that thing stores 25,000 volts, and is fragile besides.
I don't want to shell
out money on a new hdd and discover that it will not
fit,
It's really hard to find internal drives that aren't one-third height nowadays...
or that it is not supported by Mac OSX 10.2.4.
If it'll fit, and it's a IDE drive, it'll work. (SATA drives and SCSI drives need not apply, but they cost more than IDE drives, anyway.)
It is times like this that I get so frustrated being
the only mac user I know.
But think you good you'll feel the next time a big virus (<cough> Sony rootkit (</cough>) starts making the rounds.
Can somebody please advise whether the error code
refers to hdd failure or OS system failure.
Neither. It's ethernet, but you know that already.
I tried
to archive and install OSX again, but still got this
error code. Disc Repair says that my drive is 99.7%
free. Have i lost everything?
Did you do an erase? -
i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks
I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help. -
Not getting events using CAT? (and other trouble)
Hi,
i am developing an applet for CAT (card application toolkit) to be run on a umts-enabled sim-card.
While trying to register to some events in the applet's constructor i get a ToolkitException with reason EVENT_NOT_ALLOWED.
The Events in Question are:
EVENT_STATUS_COMMAND
EVENT_MENU_SELECTION_HELP_REQUEST
EVENT_TIMER_EXPIRATION
Not being able to register to a timer confuses me a little bit, do i have to fulfill a precondition before
registering to these events?
Many Other events do not occur (or at least my applet is not notified).
While in normal User operation (Phone Calls, sending and receiving SMS) the only event i receive is
EVENT_FORMATTED_SMS_PP_UPD
to notify me of a received sms.
Neither
EVENT_EVENT_DOWNLOAD_CALL_CONNECTED
nor
EVENT_EVENT_DOWNLOAD_CALL_DISCONNECTED .
are sent to me, for example.
Is there anything i am doing wrong?
n'cu
StefanWhile trying to register to some events in the
applet's constructor i get a ToolkitException with
reason EVENT_NOT_ALLOWED.
The Events in Question are:
EVENT_STATUS_COMMAND
EVENT_MENU_SELECTION_HELP_REQUEST
EVENT_TIMER_EXPIRATIONHere is a citation from the API (ToolkitRegistry.setEvent(byte) Release 5). Take a look at the reason code EVENT_NOT_ALLOWED.
* Sets an event in the Toolkit Registry entry of the applet.
* No exception shall be thrown if the applet registers more than once to the same event.
* @param event value of the new event to register (between -128 and 127)
* @exception ToolkitException with the following reason codes: <ul>
* <li>EVENT_NOT_SUPPORTED if the event is not supported
* <li>EVENT_ALREADY_REGISTERED if the event has already been registered
* (for limited event like Call Control)
* <li>EVENT_NOT_ALLOWED if event is EVENT_MENU_SELECTION,
* EVENT_MENU_SELECTION_HELP_REQUEST, EVENT_TIMER_EXPIRATION, EVENT_STATUS_COMMAND
* <li>TAR_NOT_DEFINED if event is FORMATTED_SMS_PP_ENV, FORMATTED_SMS_PP_UPD or FORMATTED_SMS_CB_ENV
* and the applet has no TAR defined
* </ul>
* @exception TransactionException if the operation would cause the commit capacity to be exceeded.
public void setEvent(byte event) throws ToolkitException, TransactionException {}
Not being able to register to a timer confuses me a
little bit, do i have to fulfill a precondition
before
registering to these events?You'll be implicitly registered for a timer if you're calling ToolkitRegistry.allocateTimer(). The same happens implicitly for EVENT_MENU_SELECTION_HELP_REQUEST (see ToolkitRegistry.initMenuEntry(..)) and EVENT_STATUS_COMMAND (see ToolkitRegistry.requestPollInterval(short))
This behaviour depends on the fact that these events are based on limited card ressources (there are only 8 timers available, the poll interval is managed by the toolkit framework, ...)
Many Other events do not occur (or at least my applet
is not notified).
While in normal User operation (Phone Calls, sending
and receiving SMS) the only event i receive is
EVENT_FORMATTED_SMS_PP_UPD
to notify me of a received sms.
Neither
EVENT_EVENT_DOWNLOAD_CALL_CONNECTED
nor
EVENT_EVENT_DOWNLOAD_CALL_DISCONNECTED .
are sent to me, for example.
Is there anything i am doing wrong?Are you sure, that your applet hasn't been triggered? Perhaps another error has occured? Try to change an attribute of the class before doing anything else in the processToolkit(byte) method, trigger the applet and read the content of this attribute after selecting the applet in a CAD. -
Skipping songs and other troubles
Hi!! Can anyone please help me? My brandnew iPod Nano started out of the blue to skip all of my songs and wont show my pictures anymore. I think I always did everything right with it and now that. Only have it for a month and I allready had to restore it before. Can anyone please help??
Hi! Had problems on the iTunes. My iPod didnt show up and the technical help person from the phone service told me to restore it. That was just a week after I bought it... It's the first time I have an iPod. Just don't know what's normal or not. Can't imagine why I have all the problems if I'm following the "rules" if you know what I mean. Love the iPod but I'm kind of disappointed by all the problems...
-
15" MBP emitting sudden, constant whirring sound along with other troubling issues. Advice?
Monday morning. Start up my computer. Fancy greeting in the form of a sudden, constant whirring sound coming from the rear of the computer, neither side is favored. It sounds like the fan(s) are running super fast. Attending this sound are these smaller dysfunctions: the screen will go near-black when idle, instead of grayed down; when in sleep mode, the intermittant sleep light does not come on; the power cord (there is no battery in this laptop since it split apart long ago), which typically glows bright green, is now just a whisper, barely glowing at all; and the whirring begins IMMEDIATELY when I touch the on button and doesn't subside for several seconds after I close the laptop for sleep.
What. On. Earth?
The computer has never behaved this way except during brief periods of extreme high temperatures, but even then, the smaller issues were never present. I've looked on forums and see various possible explanations, but nothing that covers this combination of sudden problems. I have bought an additional external harddrive, which will arrive by Friday (my other one is full), so I'll back up everything in a flash. In the meantime, is it safe for me to be using the whirring beast? Do any of you mac-heads have experience with this?
Thanks in advance for any information you can share!Thanks for the answer. I've been backing up my data all along. The Apple Care phone support people have been insisting that it must be a software problem because of the extended hardware test showing no errors. When I took my machine to the Apple Care store, they only wiped the hard drive, reinstalled the OS, and replaced the chassis that had been damaged in an earlier Apple Store service visit.
I forgot to mention that I've also replaced one of the RAM cards (which failed the EHT in October, when the logic board also failed), so I'm now on my third problem. I've done a bit more examination of the machine, and I'm fairly sure I've got a Rev A iMac. The serial number falls within the range of the ones that had problems, though mine aren't the ones described on the info page.
I've been trying the Apple Care suggested solution of creating a new user (the last Apple Care person I spoke to insisted that the problem was created by some bad preferences). I haven't yet had another experience of the "tongky" noise followed by the response slowing to a crawl, but I do hear an ominous single click several times a day. Response times continue to be sluggish (again, I have a GB of memory), and the machine continues to go to sleep after about 5-10 minutes of being idle (I'm currently set for one hour), with the screen saver never coming on.
I guess my bottom line question is what exactly do I say to Apple Care to convince them that I've got a hardware problem and get them to replace the hard drive? -
Hello !
I've got a real trouble with my dns configuration... and i can't understand! so, i need some help....
well, qutie newbie in mac os server, i run in on a G4, and i had not noticed any trouble until i've decided to run open directory as a master with LDAP, wanting to have a kerberos protection for the users.
Kerberos doesn't want to play with me !
I've been in console mode to have a look, and, actually i've seen this :
"Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no name available via DNS for 192.168.0.109
Oct 17 11:31:08 wakan servermgrd: servermgr_dns: no reverse DNS entry for server, various services may not function properly"
Ok... my DNS has a trouble... but i don't know how to fix it ! Is there anybody in this world who can help me?
I don't want to have a real DNS for my little server... but i understand that my config is not good. I can understand that having a caching DNS can improve the quality of my config, and, in other hand that it is necessary for having the services of OSX server in an effeciant way, but i don't know the way and the parameters i've to put in my config to fix it.
Now, just some words on my config...
First, i've got an adress provided by my FAI (the frenchy workd for ISP, i think) is "193.252.209.135". This adress is set on a d-link modem router via PPOE. The DNS of my provider (wanadoo.fr) are 80.10.246.1 and 80.10.246.132.
After this there is my G4 With mac osX server.
• en0, the "extenal gate" and the internal ethernet on the computer is plug on the modem with the adress "192.168.0.109". the router is set on "192.168.0.1". the dns are 80.10.246.1 and 80.10.246.132.
• en1, the "internal gate" for the network, an PCI card in the computer, has the parameters : adress "192.168.3.1", subnet "255.255.255.0", router "192.168.3.1". no dns records. (no VPN service for the moment). After this, i've a switch for the macs behind the server. (without any link agregation)
All those parameters have been set by the gateaway assistant.
And now the parameters inside the admin server :
DHCP : en1 - adress from 192.168.3.2 to 192.168.3.254, name 192.168.3. no static card. Router 192.168.3.1. No name for domaine by defaut, name servers 80.10.246.1 and 80.10.246.132 No LDAP, no WINS.
DNS : No zone transfert, recursivity is ON. No zone records.
NAT : set on full, Transfert and Network Address Translation.
When i've been on the terminal, i had those information:
"wakan:~ st$ sudo changeip -checkhostname
Password:
Primary address = 192.168.0.109
Current HostName = wakan.local
The DNS hostname is not available, please repair DNS and re-run this tool."
All my "main" services are working fine (AFP, Firewall, DHCP, DNS, Update) Open Directory is running without Kerberos. By the way, all the macs after the G4server can have a corect access to internet, and share information via LDAP of Open Directory, but i've to say that, a couple of days later, a friend of mine, who has a PC computer, can't have a DHCP dynamic address when he plug on my little network. I think that it is an other trouble, and i've decided to have e look to this later... but if someone knows how to resolve it...
So here begins the nightmare for me... so if anybody can help me... i realy need some help to fix this mystery!!!
Special thanks!As the router modem is already doing NAT why use NAT in the server?
If you want to use OpenDirectory and other services you should/need to set up the DNS correctly using the server's private IP (and others in the same range the server is setup with). The domainname used internally can be different than your public one.
And then use the server as the only DNS for you LAN clients and the server itself. Forwarders (your ISP DNSes) in /etc/named.conf usually speeds up lookups of external addresses (also turning off IPv6 can help that too). -
Dvd burned won't play.. tried many methods of trouble shooting still nothin
I'm trying to burn some of my video work for an application for grad school. It is HD, but I exported to an mov. file threw it in dvd studio pro and when I build it's fine, and simulate it it works, when I burn it it work on my mac, but it won't play on anything else?? Not my xbox or dvd player? The menu is set correctly with buttons working/linking fine. When I open the "dvd" on my mac it has the video_ts folder in it. I burned two different kinds on a doual layer 8.5 gb - r and a 4 gb + r and still nothing? I have no idea whats wrong can anyone suggest any other trouble shooting/solving methods? thanks, I'm working against deadline for grad school so time is important.
You burned an HD DVD. This is a nearly defunct format that will only play on a Mac or Toshiba's discontinued HD DVD player.
You will need to start over.
Delete any folders that DVDSP may have created. They are of no use to you.
The material must be encoded as DVD (not HD DVD) m2v and ac3
When you start your project again in DVDSP, make sure you use a DVD (not HD DVD) template.
You will need to recreate all your buttons, links etc from scratch. There is no way to port an HD DVD project into a DVD project.
Good luck,
x -
Memory and Remote Control Troubles Encore CS4
Hi again After a week I have not seen any solution (or cause to my problem and hope perhaps someone will have some tips for me. So I copy my last new post and keep my fingers crossed! ( I think I read somewhere this is the way to go about - reposting)
I just finished reading threads re memory problem with encore. Some from 2008! I'm using files I have created in PPcs4 with AVCHD clips exported as media to give me .avi files that I use to make a dvd in Encore. Usually it goes all well only for one thing my remote control end product does not work as it should at all, yes I still can play back the whole DVD and even go from one chapter to the next but not really choose and not with the menu on screen.
So that is where the next trouble arises as I try to get the remote control in the pannel preview to work. After only a few changes in the button routing trying the preview will get me the insufficient memory warning. It does not really crash, the preview may freeze but I can terminate it and try again. But from then on it's "go slow" to no where I read Bill H's entry about page filing and tried a few things I have 8gb ram so used one of my TB and allocated this x3 in virtual memory. I don't really understand what I'm doing, just tried to follow some instructions. but this did not make any difference at all. I also have asked my system (W7 4gb ram i5 intel and plenty of HD realestate) to optimise for best performance. So my Desktop is now looking a little pale! Still to no joy.
My other trouble which seems related is this darn remote control. I can't get it working I used it in pp2 suite I can't quite remember how it was but it worked. Here in CS 4 all I can see is a slight highlight when I hover over it but it does not seem to respond. I've been to so many searches but none seem to respond to "enable preview remote control" or anything around this meaning. So as long as I can't use it in the pgr as long it will not be correct on my dvd!
I have not used Mpg and can see my Audio timeline the same length as my Video
I just imported such a file in a new project chose a preset menu (Before I used a blank menu and created buttons on a jpeg), made 3 chapters linked correctly (my Build /check did not return any error) but still unable to use the remote control, It's ok with the mouse till I try a little more and I get a memory problem.
PS I always had a memory problem but not related to computers! I feel a little embarrassed that I have not been able to solve this after so much time spent on it and hope some one may have an answer. Thank you
I have not been through defrag and turning everything else off as I worked in PP with nil such problem and thought I gave PP a harder job with my hd clips, titles, added audio. Perhaps I'm quite wrong.
I also remember reading about someone who's remote control would work ok on 4:3 ratio but not on wide, so I tried both to no avail in my case.
Ok I'll go quiet
PS: I also added that i did go through defrag and found it was not needed. as I suspected I had lots of room. (i5 8gb ram, 2X1tb hd external 1/2 tb )
I'm aware and do appreciate that people who give help on forum are doing it on a voluntary basis using their own time and am very thankful for it.Thank you Stan. It's not going too well, first I tried to capture the screen (I have 2 monitors) and it gave me a lot of trouble unlike yesterday, (it kept capturing the wrong screen although Encore was the one activated) and I ended with a black and white screen?
Then my memory error became worse. I turned the internet off and lots of processes with no improvement. Anyway here is what I got about routing.I wonder why it's a gif image I saved it for the web. Actually these buttons weren't routed anymore and had a zero on most branches (arrows) - Hmm I can see "Sunpeak" with such zeros here! I don't know what happened but even "play All" was routed to "Banff" at the bottom right that is 1 to 2. before I took the screen shot. I might have to try with a conventional lay out menu button. This is difficult with all my memory crashes. I looked at quite a few threads to optimise but many relate more to AE that has a memory setting in Preferences. (actually, as a trial, I even allocated 5 gb ram for other application from AE that I don't even use, but to no avail)
I definitely routed each button 1to 8 but here it's not anymore the way it was! And I'm sure I save it after doing so.
I'll give it another go but not sure when. -
There's some background info to give on this issue first.
Last week my internet connection had a brain ****. Opening a browser would just give me a strange page that appeared to be from Comcast (my ISP). The page told me to download a Comcast installer to get my account running, or something of the sort. Of course, I've had this account for months, so I did no such thing. And for some reason the Comcast logo was a pixelated, low-quality image. I didn't know if it was some kind of hacker thing or what. I had gotten a message from Comcast the day before or so, but it was an automated message that just said to call them, and I didn't feel like it since they didn't even say what the call was about. In addition to the browser thing, neither Limewire, iTunes, nor Thunderbird could connect.
I wasn't home for a couple days, and when I came back it had magically fixed itself. Except I can't stream audio--when I try to open a stream in iTunes, it pops up the "Connecting" window, and just keeps trying to connect until I click stop. And when I stream movies with the Quicktime plugin, the video plays but not the audio. Both iTunes and Quicktime play back audio from the HD fine. And every other program I have that requires and internet connection connects fine.
I have unplugged and replugged my cable modem, and looked around the System Preferences for anything amiss, but I can't figure out what the problem is.
Any suggestions? Thanks.Hi--
Opening a browser would just give me a strange page
that appeared to be from Comcast (my ISP). The page
told me to download a Comcast installer to get my
account running, or something of the sort.
That's called a "walled garden". You get stuck there if Comcast thinks your cable modem isn't allowed to connect up to their system for some unknown reason. That happened to me earlier this fall with an old Surfboard 3100 modem.
I had an old machine I felt like I didn't mind sacrificing if I had to, so I went ahead and downloaded their software. The funny thing is, it wouldn't finish provisioning the modem, I had to call them anyway. In the end, after other troubles with that modem, I just returned it to Comcast and got a newer one. It's been pretty good so far...
But what you described, the ugly logo, etc., all sounds like the "walled garden". Don't know why or how it magically fixed itself, though.
Your streaming problems almost sound like a Quicktime problem. Especially where you have video but no audio. You might try re-installing QuickTime and see if that helps.
charlie
Maybe you are looking for
-
How do I upload my resume when it's saved in Pages but needs to be send as a PDF or word file?
How do I upload a document that has been created using pages as a PDF or Word file? When I attempt to upload it, the only choices I get are choices from my camera!!
-
I cannot activate my phone because my keyboard is not functioning correctly. How do I bypass my password to activate my phone
-
How to get Value of a item of first record when current record is second
How to get Value of a item of first record when current record is second in Form6i ? get_item_instance_property dose not allow to get value.
-
Bottom Line: volume bar wont show ive tried cleaning the dock connecter with a tooth brush, with a paper towel, blowing it, nothings working Ive also tried erasing, restoring, reseting, turning the phone on/off, going to settings > music > sound chec
-
Dear all, I am moving to Malaysia from the US. I understand all iMacs can run internationally. Is there anything I need to do to ensure the voltage/amp requirements are met? Does anyone have any experience with this? Best, Zilla