Mac OS X Server 10.6.7 update - Time Machine not working and other trouble.
I've upgraded my mid 2010 mac mini server to 10.6.7 with server Combo download.
After installation (without any errors) i've detected this troubleshooting.
Time Machine (backup hd is the 2nd 500GB Hd of mini server) dont work more and
display error message that suggest to verify hard disks (done with no errors detection).
Mac Help display white page.
And if try to install Server Admin Tools, installation utility not recognize system HD and cannot be done.
The mac mini server seems however works and services seems works rights. Can be rebooted without problems.
I've tried to backup the system disk on the second hd with Carbon Copy Cloner without problem and it recognize system disk well.
I've upgraded also two others mac minis (mid 2010) with standard 10.6.7 version (no server) and a macbook and a macbook pro without problems (but i've not tried time machine on them).
Thanks in advance for any help!
I know the problems with Time Machine on Mac OS server. In your case: Look at the log files, searching for "backupd", if that tells you anything.
In my case, Time Machine in the last year stopped several times. Occasionally, there was a helpful message in the log files where I could identify a file where it had hung -- typically intermediate build results of Xcode. After excluding or deleting the offending files (where possible), Time Machine ran successfully.
Another situation which has repeatedly occurred is that time machine just hangs and does not progress, and no log entry helps. In 3 such cases what helped was to delete the spotlight index (e.g., with TinkerTool System) and let it rebuild. It took inordinately long (10 hrs) and there were log entries by mdworker that it had difficulty processing files. But when the spotlight index was finally rebuilt, Time Machine worked again.
BTW: I don't need Time Machine to backup the server system, for that I run mirrors etc., but for user files it is most convenient and has helped several times. Thus I have excluded nearly everything but /User/*.
Similar Messages
-
Elite Pro, CMSS-3D not working and other issues after driver update
DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0 -
Update Panel is not working browsers other than IE
In SharePoint 2013, Update Panel is not working for firefox, chrome etc.
Hi,
From your description, my understanding is that you use
<asp:UpdatePanel>tag in your code, but it does not work well in browsers except
IE.
I have test
<asp:UpdatePanel>tag with code below, and it works well in IE, chrome, Firefox
as the screenshot.
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="true">
<ContentTemplate>
<asp:Label ID="lbl" runat="server" Text="Loaded" Visible="true"></asp:Label>
<asp:Button ID="btn" runat="server" OnClick="btn_Click"/>
</ContentTemplate>
</asp:UpdatePanel>
protected void btn_Click(object sender, EventArgs e)
lbl.Text = "BUTTON CLICKED !";
lbl.Visible = true;
The screenshot below is my result(the first is result in Chrome, second is in Firefox and last is in IE):
And you also could refer to this article:
http://sharepoint.stackexchange.com/questions/72928/update-panel-not-working-in-firefox-2013
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
After the 10.5.6 update Time Machine stops working
After the Mac Os X 10.5.6 update Time Machine won't back up my Mac. In an effort fix the problem I deselected my Western Digital External Drive-My Book Essential Edition and then reselect it and I got the following message You do not have appropriate access privileges to save file “.001b63aae271” in folder “Time Machine External”. I also tried to repair permissions in Disk Utility, That didn't work. Then earlier today I found out I'm not the only one with these errors. How do I fix this?
Hello,
here is what I found on http://programminggems.wordpress.com/2008/12/16/mac-10-5-6/
"1. Click on the magnifying glass in the top right (Spotlight) of the menu bar.
2. In the text entry field type “Terminal” (in all these steps, type what is in the quotes, but not the quote characters themselves) and press Return.
3. In the new window that opens, type “cd /Volumes” and press Return [note the space in the command].
4. Type “ls -al” [the "l" is a lowercase "L"], press Return, and note the name of your backup volume.
5. Type “cd ” (no Return yet), type the first few letters of your backup volume name, and press the Tab key, then press Return.
6. Type “ls -alF” and press Return and note the file with a name that matches the error message.
7. Type “sudo rm ” (no Return yet), type the first few letters of the file name that is reported in the error and press Tab to get the full name on the command line, and then press Return. (Alternatively, you can change ownership as described in my comment #3.)
8. When asked for your password, enter it and press Return.
9. Type “ls -alF” and press Return and note that the file is gone.
10. Type “exit” and press Return to close Terminal (then use the menu to Quit).
11. Retry the Time Machine configuration."
It works fine for me, thanks Mr Foster! -
Following update Word:mac window won't enlarge/Restore button on Time machine not active
I have found two issues following automatic installation of the Security Update 2014-005 that took place last night.
The first is when I open Word:mac my window is super-small (2"x2") and will not enlarge using the manual "pull" although the arrows do appear when my mouse touches the edge of the window.
When I could not discover a way to correct this, I decided to restore from my Time Machine backups, but my Time Machine Back-ups won't all me to restore. I can see the back-ups are there but the option to Restore is not active- I can select the various back-ups and only the Cancel option is active.
Since it seems I cannot go back I may try to upgrade the OS to Yosemite to see if that helps.
Help is appreciated.So the issue with Word:mac was a glitch that resolved by changing, then reverting, screen resolution options.
http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword/word-view-stu ck-small-and-wont-expand/bfd3fcd7-97bf-4e3d-998d-b5476bf2e83b
And apparently I can't restore from a back-up following a security update. This would have to be done using the recovery mode since firmware was updated.
Good enough. -
IPhone disconnect during update, now is not working and I can't see im
My iPhone 4s is not working, I see the screen connect to iTunes.
I have try to proceed ton an update via iTunes, but my wire have a trouble, so the phone disconnect, to process of update begin and stop.
I have change my wire, I connect my iPhone to windows, I have de sound of connecting, I have iTunes open, but I can't see my phone in iTunes and neigther in my computer.
Know I have phone dosen't working and I can't try to do something, I look in tutorials they don't have anything, they solutions for problem close, but not this one.Did they have a kind of BBSAK like for BlackBerry? if I can just swipe and reinstall iOS it will be easy for the rest.
-
Time Machine not working after 2.2 update
Has anyone else experienced this, or can someone tell me how to fix this error that came up after the OS X Server update 2.2?
"The error occurred while processing a command of type 'getBackups' in plug-in 'servermgr_timemachine'"
All other services updated correctly and came back on line.
I'm new to servers so please be patient.
Thank you in advanceI'm getting this error too. I thought it was because some of the machines on my network were running antivirus auto scans. However, maybe it could be the 2.2.1 update. Are either of you running antivirus scans?
-
I'm trying to sign in with my Apple ID on the first set up of my MacBook Air and it keeps coming up with the error message "couldn't sign in because of server error"
Can anyone help with this please?1) The One-to-One program is in person in an Apple Store. I've never heard of any phone-based training. Perhaps the salesperson was confusing that with AppleCare which extends the phone support on your product.
2) Here is the relevant part from the official terms:
Members may have no more than one (1) Personal Training, one (1) Group Training and one (1) Open Training session reserved at any given time. After the completion of your session, you may schedule your next.
http://www.apple.com/retail/learn/one-to-one/terms.html
If the saleperson gave you incorrect information that makes the One-to-One service unusable, talk to the store manager and tell him or her what information you were given incorrectly, and ask about a refund of the cost of the program.
Regards. -
Hello,
I've been going through my software and downloading all the updates I can find. I was wondering if any of you might have this in your archives, Apple seems to have "lost" it and my usual haunts have come up empty.
I've recently bought Mac OS X Server 10.0, and I have some of the other OS X Servers (for the Xserve), it seems finding (just the) updates you need before OS X Server 10.3 is hit or miss.
In one example I'm trying to find:
Mac OS X Server 10.0.4 Update: Document and Software
http://docs.info.apple.com/article.html?artnum=120035
( http://download.info.apple.com/MacOSX/062-8318.20010702/0z/10.0.4ServerUpdate.dmg.bin )
Dumps you at:
" This URL is no longer used. If you get to this page, please go to:"
http://www.info.apple.com/export/
... do strange loop.
(My cookies are enabled)
I know this is old, thats not the point, why is this and for that fact most of the other updates missing?
I'm not real clear if 10.0 Server is update-able to 10.1 Server with the OS X 10.0-10.1 update CD for the regular OS X to which you may then UD to MacOSXUpdateCombo10.1.5, they mixed it up so you can't tell - or I can't tell.
Mac OS X Server 10.1: Chart of Available Software Updates:
http://docs.info.apple.com/article.html?artnum=42741
See what I mean?
Even OS X Server 10.0.3 Update would suffice. I'd appreciate you all poking around - I got nothing.
Mac OS X Server 10.3.x on, stuff is easy to find, Server 10.2.x and earlier is a pain and this is the last time (hopefully) I'll need to do this.
If anyone with these updates could contact me that would be great or just reply to this post, this server will not be online - just to be clear.
Any help would be appreciated.
hylas
California, USA
hylas[|at|]operamail[|dot|]com
Macintoshes Mac OS X (10.4.6) System 1.0 - 7.6.1, MacOS 8.0 - 9.2.2, OS X 10.0 - 10.4.x Client and some Servers"Which took me about 5 seconds to find, by searching at
http://www.apple.com/support/downloads/
for 10.0 server
and choosing "restrict to downloads"
I've spent more than five seconds looking dear one.
Mac OS X (10.0.4) Combined Update Information and Software
http://docs.info.apple.com/article.html?artnum=75141
is not:
Mac OS X Server 10.0.4 Update: Document and Software
http://docs.info.apple.com/article.html?artnum=120035
it is required, though.
Mac OS X Server 10.0 OZ691-3023-A
Mac OS X Server 10.0 (has 10.0.3 4P13 on it) OZ691-3023-A
/AppleSupport_Area/Apple_Software_Updates/Mac_OSX/downloads/062-8318.200106027/0z/10.0.4ServerUpdate.dmg.bin
http://download.info.apple.com/MacOSX/691-3023.20010702/0z/10.0.4ServerUpdate.dmg.bin
^ No worky ^
Title:
Mac OS X Server 10.0.4
Description:
Installing the updated Server Admin on Mac OS X clients After installing the 10.0.4 Server Update, you may update your Mac OS X Server administration clients by copying the Server Admin application to them. Follow these steps to perform the copy: Install 10.0.4 Server Update, then restart. Start Apple File Services if necessary. Copy the Server Admin application from the /Application/Utilities folder to the /Shared Items/Public folder. On your Mac OS X client, install 10.0.4 Update if necessary. Connect to your Mac OS X Server, mount the Public folder. Copy the Server Admin application to your Mac OS X client. Requirements for Mac OS X Server 10.0.4 Update You must have previously installed the Mac OS X Server 10.0.3 software in order to install this update. In addition, this update requires that you install the Mac OS X 10.0.4 Update before proceeding.
OS X Server 10.0.4 Receipts
Essentials.pkg
BSD.pkg
SoftwareUpdate131.pkg
10.0.1Update.pkg
10.0.3Update.pkg
10.0.2ServerUpdate.pkg
EssentialServerSoftware.pkg
MacOS_X_ServerAdmin.pkg
MacintoshManagerAdmin.pkg
MacintoshManagerServer.pkg
QTSS3.pkg
MinimalSystem.bom
10.0.2Update.pkg
10.0.4Update.pkg
MicrosoftIE5.pkg
10.0.4ServerUpdate.pkg
NetBoot Extras: Information and Download
http://docs.info.apple.com/article.html?artnum=120039
It's a bit confusing, reread my initial post it's a real mess upgrading to 10.1 too.
Thanks for trying though,
Macintoshes Mac OS X (10.4.6) -
App store, Safari, software updates, icloud, do not work in Mavericks 10.9 using a proxy server
App store, Safari, software updates, icloud, do not work in Mavericks 10.9. these problems are interrelated I am sure. Apple apps were working fine in 10.8.5 I could do software updates through a proxy server using password authentication. I reinstalled a new system 10.9 on another partition and it won't let me use Safari or update software using a proxy server. Firefox works fine (I am using it to post). I am very disappointed that this wasn not fully tested BEFORE releasing Mavericks. Any solutions would be greatly appreciated.
I had this problem myself.
Checked the system log with Console, and I found the entry:-
Nov 11 11:16:41 teds-new-mac.ad.mycompany.co.uk ocspd[537]: Authentication challenge received for "10.203.39.212:8080", unable to obtain proxy server credential from System keychain.
For some unknown reason, Mavericks seems to be looking in the System keychain, when these credentials are actually held in the Login keychain.
So, I tried "Copy & Paste" - copying the https user name & password from the Login keychain and pasting into the System keychain, which worked but it's not quite as straightforward as I initially thought.
Pasting into the System Keychain was, I found a not-very-intuitive process:
Having opened your Login Keychain, click once on the item to be copied and when it's highlighted, select "Copy" from the Edit menu or, of course, cmd+c.
Select the System Keychain:- DO NOT CLICK THE PADLOCK IN THE TOP LEFT TO UNLOCK IT.
From the Edit menu, select "Paste" or cmd+v.
You will then get a dialogue box,, enter your administrator's password and select "Modify Keychain" or just hit return, as it's the default entry.
I found a restart was in order before it recognised everything and would accept https pages without alert boxes, but YMMV.
Funnily enough - and this is where it seems counter-intuitive, if you do click on the padlock and unlock the System Keychain, "Paste" is greyed out in the Edit menu and cmd+v has no effect.
Exactly the opposite to what I'd expect.. -
I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
ThanksYou are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC. -
I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.
I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help. -
Time Machine not backing up. Very slow, essentially hanging. I have 10.7.5 Mac OS X Lion (11G63). I have put in all updates. I tried to put my folders into "private" in the Spotlight (b/c I read that might be the problem). Still not working.
Thanks in advance for any help!For all things Time Machine see Pondini's excellent information here...
http://pondini.org/OSX/Home.html
Start at Troubleshooting. -
I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode
I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring. -
I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time. But I have no idea what to do...
Can someone help me?A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
Repair the hard drive and permissions using Disk Utility.
Backup your data. This is vitally important in case you make a mistake or there's some other problem.
Connect a Firewire cable between your old Mac and your new Intel Mac.
Startup your old Mac in Transferring files between two computers using FireWire.
Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011
Maybe you are looking for
-
I want to put movie on my ipod that I bought specifically with a digital copy but it says that they cannot be copied to my device. I don't know why.
-
How to get audio to go to tv using mirroring from macbook pro
How do I get the audio to go to my tv using mirroring with a macbook pro?
-
Hi, I've got a MacPro and a 30'' cinema display connect on the dvi port. I've got an old 23'' display with an ADC port, and I want to connect it on the mini display port... Is it possible ? How can I make that ? Thanks a lot for help...
-
User settings in Purchase Order.
Hi, I am trying to do some user settings in PO. When I go to t.code ME21N and click on Default values - > More field. I changed the positions of Plant and Storage location as per my requiremnt and Save it. But that is not happening, when I go back an
-
Flat file load through Integrated planning
Hi Expert, Could any one help me in finding a K9*.BIR