FSCM 9.0: COBOL program does not post a Journal into Ledger correctly

Folks,
Hello. I am working on FSCM 9.0 General Ledger module. To FSCM 9.0, we need to compile COBOL by ourself.
I downlaod and install "MS Visual Studio 2005 professional" and "Micro Focus Net Express 5.0". Then compile COBOL successfully. The executable files are copied to PS_HOME\CBLBINU.
Editing Journal is working correctly as follows:
General Ledger > Journal > Creare/Update Journal -> Add -> Line -> Edit Journal ->Process, Total amount comes up correctly and Journal status becomes "V". All debit accounts and Credit accounts are posted into Database PS_JRNL_LN table correctly.
But posting Journal is not working correctly as follows:
In Journal Line page, after select Post Journal -> Process, Journal status becomes "P". But when check Database table PS_Ledger using select * from PS_LEDGER, only Debit accounts of a journal are posted into PS_LEDGER table, all Credit accounts of a journal are not posted into PS_LEDGER.
Because posting a journal into PS_LEDGER table only debit accounts and no credit accounts, all general reports, such as Trial balance, cannot be generated.
Thus, my questions are:
First, does COBOL program GLPPPOST.exe have a problem ? If yes, how to solve it ?
Second, do I set up something incorrectly in General Ledger module and cause only Debit accounts of a journal are posted into PS_LEDGER table and not Credit accounts ?
Thanks.

Folks,
Hello. The question is solved by myself. Thanks.

Similar Messages

  • FSCM 9.0: COBOL Process does not post credit accounts of a Journal Entry

    Folks,
    Hello. I am working on FSCM 9.0 General Ledger module. COBOL process GLPPPOST posts only debit accounts of a journal entry into PS_LEDGER table but not credit accounts of a journal entry. Can any folks understand how to solve the issue ?

    Folks,
    Hello. Thanks a lot for replying.
    I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
    I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
    When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
    Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
    "Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
    My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

  • Payables Transfer to General Ledger does not kick off Journal Import

    Hello,
    This is on 11.5.10.2.
    We have some invoice batches that are not posted in GL. This problem is sporadic and only happens for some batches and not all. It is unclear to why some batches are posted fine and others are not.
    The problem is at payable trasnfer to General Ledger program. After these batches are validated and create accounting has been executed successfully, we submit Payables Trsnfer to General Ledger program.
    This program does not kick of Journal Import child process for these batches. It just completes normally without showing any error detail on log/output.
    What could be the reason? Why Payables Transfer to General Ledger is not kicking off Journal Import for these batches?
    I have even verified GL_INTERFACE and there is nothing there.
    Please advise.
    Thanks
    D

    Are these invoices accounted, and was create accounting done for these Invoices?
    If so these should be available for the import.

  • FSCM 9.0: COBOL Process GLPPPOST does not post Journal Entry correctly

    Folks,
    Hello. I am workin on FSCM 9.0 General Ledger module. "Edit Journal" is AE program that works correctly. But "Post Journal" is a COBOL program that does not works correctly.
    COBOL process GLPPPOST posts only debit accounts of a Journal entry into table PS_LEDGER but does not post credit accounts of a Journal Entry into table PS_LEDGER. When run the Ledger Report, the report has only column headers and has no data.
    Does FSCM 9.0 have a problem or COBOL process does not work correctly ? Can any folks help me ? Thanks.

    Folks,
    Hello. Thanks a lot for replying.
    I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
    I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
    When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
    Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
    "Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
    My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

  • Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)

  • My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.  I uninstalled the program and reinstalled again but nothi

    my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.
    I uninstalled the program and reinstalled again but nothing gone better-
    What should I do?
    Best regards

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • Lots of programs does not respond, when opened

    Lots of programs does not respond, when they are opened, Apple store, Mail, Photo Booth and VideoConverterPro and some moor.
    To close, I have to click on finder first. What to do ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HP Device Toolbox (via Programs) does not open. It only opens via Webbrowser​.

    I have the HP LaserJet 100 color MFP M175 PCL6 since one year and it operated always properly.
    Its connected via USB.
    But now I cannot start HP Device Toolbox anymore when I start it via Start > Programs > HP etc. 
    I see shortly some flashes on my desktop but the program does not start. I get an error window in Dutch saying: "Error Cannot connect to printer. Check printer connection and try to restart HP Device Toolbox".
    I can acces HP Device Toolbox only by entering the IP adress of the printer in the webbrowser.
    I can print and scan normally.
    I uninstalled all the HP software and reinstalled the software and drives but this does not help.
    Who can help?
    Thanks in advance.
    Joep

    Hi @Joep123,
    Too bad the System Restore didn't work, I have seen this type of issues after some updates were ran on the computer.
    I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
    Try and open the Toolbox Software again.
    Are you getting any error messages?
    If you are still having issues, try the following steps please:
    Update the printer's firmware. HP LaserJet Pro Series Firmware Update Utility
    I would download and install the full driver, instead of using the Smart Install on the printer.
    HP LaserJet Pro Series Full Solution Software and Driver.
    If you have another computer, run the install on it to see if you have the same results.
    Please let me know the results.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

    Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

    Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
    By the way, it might help if you indicated where you are located.
    To complain to Apple use http://www.apple.com/feedback/ipad.html

  • On Creative Cloud,Photoshop CC Trial (or any other Adobe programs) does not download , States "Download error  Press Retry to try again... (49)". How can I resolve this?

    On Creative Cloud,Photoshop CC Trial (or any other Adobe programs) does not download , States "Download error  Press Retry to try again... (49)". How can I resolve this?

    Try logging out of the CC Application and restarting your computer. Also, try running the CC app as an administrator.
    Benjamin

  • My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

    My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
    After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
    There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
    even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
    Can you enlighten me what can I do I need to use my e-mail program urgently !!!
    Thanks for your help

    I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
    You might try defining a new SMTP server to see if that will work any better.
    By the way, the subject field for these messages isn't intended to hold a lot of text.  Put a short description of your problem in the subject field and save the rest of your message for the body field.

  • Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

    Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I purchased Adobe CS4.  I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite.  What can I do?

    I purchased Adobe CS4.  I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite.  What can I do?

    Contact support if you have serial number issues. Otherwise start by checking this stuff:
    Sign in, activation, or connection errors
    Mylenium

  • My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

    My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
    I manually deleted Firefox from the list once I have Windows processing.
    And when I clicked on Firefox, Firefox will open quickly and easily.
    Firefox process in Windows Processes names list called "firefox.exe * 32" is.
    Please try to solve my problem, my problem is how to solve?

    Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
    If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
    You might already have seen these troubleshooting articles. If not, does anything here help:
    * [[Firefox won't start - find solutions]]
    * [[Firefox hangs or is not responding - How to fix]]

Maybe you are looking for