FSCM-COL: Problems with the Collection Strategy

Hi,
We are configuring our collection strategy and we have a collection rule that is based on the following basic rules:
- BR00000002: Total of All Items Overdue Since n Days
- BR00000004: Total of All Items Due within n Days
Now, the problem is that no workist is generated for those rules
We check the FI-AR system and the customer/business partner does have open invoices that match the conditions that we definined int UDM_STRATEGY transaction for that strategy and collection rule.
Do you guys have any idea what could be the issue ?
PS: We are on ECC 6.0 an package level EA-FINSERV => SAPKGPFD10
Thanks in advance.
Best Regards,
Bruno Sousa

Hi Mark,
Thanks for your feedback.
The transactional data was transfered from FI-AR with sucess. I was able to check it on table UDM_COLL_ITEM.
The problem seems actually with those rules....
For instance, we tried by adding the basic rule BR00000008 to our "Collection Rule" and, afterwards, by adding tou our "Collection Strategy" (on transaction code UDM_STRATEGY) and if we put the condition to catch all amounts the simulation indicates that the worklist will be generated with sucess.
Thanks in advance for your help.
Best Regards,
Bruno Sousa

Similar Messages

FSCM-COL: Problem with basic rules

Hi,
We have a business requirement where the basic rules:
- BR00000002: Total of All Items Overdue Since n Days
- BR00000004: Total of All Items Due within n Days
- BR00000019: No Successful Customer Contact in Last n Days
- BR00000020: Successful Customer Contact in Last n Days
Where the parameter "NO_OF_DAYS" needs to be able to be selected as a constante (=), greater (>) or less (<) in the collection strategy configuration (Transaction Code UDM_STRATEGY => Conditions)
I tried to update the configuration of the basic rules (transaction code S_SE3_50000242 and there by changing the info in the "Single field option") but after a few tests i notice that, in spite of the user be able to select if the number of days is greater or not than "x" when i simulate i have no results....
Do you guys know how is definid the logic of those BADI's (CL_IM_UDM_BR00000002, CL_IM_UDM_BR00000004, CL_IM_UDM_BR00000019, CL_IM_UDM_BR00000020) for these selection options ?
Does it only allow to be a constant this "NO_OF_DAYS" ?
Thanks in advance for your inputs.
Best Regards,
Bruno Sousa

Hi Deep Patel,
Many thanks for your inputs.
Actually here the issue is with the option field "Number of Days" and not the amount (that is available in BR0000002). This option field is defined (as standard) only for a constant (="X" days).
If we change the option field (for the basic rules BR/02, BR/04,BR/19, BR/20) for being able to be also >, < the system seems to not work correctly...
Best Regards,
Bruno Sousa

TS5249 Problems with the Korg Legacy Collection in the new version of Garageband in Mavericks.

Hello!
I'm having problems with the Korg Legacy Collection in the new version of Garageband in Mavericks. When I try to load the AU, I get this error message:
"Failed to load Audio Unit, please contact the manufacturer for an updated version or further assistance. (-10110)"
They seem to work fine in Ableton Live 8 Lite, also running in Mavericks. So, I think it is something with Garageband. In addition, Korg updated to 64bit early last year.
Anyone know how to fix the problem? Or is Korg or Apple's problem?
Thanks.

They seem to work fine in Ableton Live 8 Lite, also running in Mavericks. So, I think it is something with Garageband. In addition, Korg updated to 64bit early last year.
Have you checked, if you have the newest 64-bit version installed? There may still be an older version sitting around - check both plug-in folders, the one in your Home folder and the one in the system library:
~/Library/Audio/Plug-Ins/
/Library/Audio/Plug-Ins/
Some programs may still be able to use 64-bit plug-ins, but GarageBand will not use them: http://support.apple.com/kb/TS5249

Solution Manager systems RAM requirements - problems with the Java Engine

Hello,
I am about to install SAP Solution Manager 7 on a WIndows 2003 Server x64 but I need to know what the RAM requirements are? I have been having problems with the Java Engine starting and it seems to time out, I have heard that this is a very RAM hungry process and it might be why?
Many thanks for your help in advance,
Omar

Hello Omar,
To size SAP Solution Manager 7.0 EHP1 we recommend to use the SAP Solution Manager Quicksizer Tool at:
http://service.sap.com/sizing-solman
Here you find information on how to use the tool, how to collect input data for E2E Scenario Sizing, on SAP E2E RCA Sizing, Introscope Tuning, Wily Enterprise Manager Cluster Setup for E2E RCA Scenario and BI Aggregation Strategy in E2E Scenario.
Please find more information about installing Solution Manager in:
http://service.sap.com/instguides -> SAP Solution Manager
I hope this information helps.
Thanks,
Mark

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with the Enterprise Manager

Hi!
I have a problem with the webbased EM (Port 1811). After restarting emctl I don't have any diagram (e.g. for the cpu usage) in the EM. It seems as if there is no picture...
Are there any services which collect these information from AIX?
Any ideas?

Hi!
I have a problem with the webbased EM (Port 1811). After restarting emctl I don't have any diagram (e.g. for the cpu usage) in the EM. It seems as if there is no picture...
Are there any services which collect these information from AIX?
Any ideas?

Problem with the Display Driver

Hi.
I just got this message when I started Adobe Photoshop today, that's the CS4 edition, about that there was a problem with the Display driver: "Photoshop have encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences"
My problem is not what to do but how to do it. I went to System profiler and found something "ATI Radeon HD 2600 Pro, and: Chipset Model: ATI,RadeonHD2600".
And so I want to ATI's website but can't find what I'm looking for.
Any help?

I have cs6 - master collection. I bought it on last december and i didn't upgrade it.
"After Effects" works for some minutes and then it stucks and give the massege above
"Display driver NVIDIA Windows kernel Mode Driveer, Version 334.89 stopped, responding and has succesfully recovered."
and preimer works and suddenly the computer crashes not before giving the massege :
"The NVIDIA OpenGL driver lost connection with the display driver due to exceeding the Windows Time-Out limit and is unable to continue.
The aaplication must close. error code: 7"
I have new computer :
proccesor :Intel Core i7-4700MQ Haswell 2.4GHz
Nvidia Geforce GT 740M
Video NVIDIA® GeForce® GT 740M 2GB
ram 8GB DDR3
hard disk : 1TB 5400RPM + 8GB SSD Cache
operating system :Windows 8 64 bit.

Problem with the program symbols in quality

Dear all,
I am facing a problem with the program symbols.
I have added new global fields in development, i have called those definations in text names. It is working fine.
After transporting these program changes in to quality these new global definations are not displaying in quality and varibles are not working.
Please give me some suggestion.
Thanks and advance

Hi Chandra,
Please check the following.....
(1)The transport request status in se10 and see if has been successfully imported to QA..
(2)if all the declarations or code have been collected in a Transport and not saved as temporary objects
To confirm the same we have to compare the code in quality and development and see if they are the same
Pls check and revert
Regards
Byju

Problems with the ipod

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

I have already researched this problem to the max, so any other suggestions are welcome, but I have already read all the discussions on it as well as the Apple Documentation. I am coming here on the off chance someone knows soemthing and so I can document for the benefit of other ipod users.
I get "Disk cannot be read from or written to" when trying to synch ipod. The error message does vary a bit.
I have seen other users referred to this artile.
http://docs.info.apple.com/article.html?artnum=301267
This documentation is pretty useless as it says that everything can be wrong.
So far I have restored my ipod many times, formatted it for windows, checked it for errors in windows, updated my ipod software, updated itunes, tried various methods described all to no avail. It is not a problem with a specific file because I have tried transferring only 100 out of the 2500 files in my collection to no avail.
I will try updating my ipod from a different computer with a different library of music later tonight. So far I have not had access to a computer with a firewire drive so that I can make sure it's not a problem with the USB cord or interface.
Suggestions are welcome! If updating it with another comp does not work I guess I'll try to use the ipods warranty. If that doesn't work I'll try to replace the harddrive myself.

Problems with the Layout Priority in KM

Hello, I have some problems with the Layout Priority in KM..
I'm using a KM Navigation Iview with "Layout Set"=NewsBrowser (this Layout Set uses a Collection renderer that sorts the folder's contents by "last modified") and "Layout Set Mode"=exclusive.
In the KM folder I setted in Details->Settings->Presentation as "rndSortProperty"=name because I need to order my files by FileName property.
Despite that in see that the contents showed in my iview are ordered by Last Modified...
The "Layout Set Mode" exclusive gives the higher priority to the Folder Settings..
I don't understand..
Thank you in advance.

Thank you Shyja,
your post was helpful, but another issue is occurred.
Maybe en example could be useful..
My scenario:
- I need to show a km folder with layout set "ConsumerExplorer" on root folder (no "property of sorting" setted on its collection renderer) and "TabExplorer" (no "property of sorting" setted on its collection renderer).
- I need to sort files and folders by "last modified". By default seems that they are sorted by "name".
- With my administrator user I open my folder details (in Content Admin->KM Content is used the Layout "AdminExplorer"), and in "Settings->Presentation->Additional Parameters" I add two parameters "rndSortOrder=descending" and "rndSortProperty=modified" (the others are parameters of AdminExplorer Layout).
- Then I check "Apply Settings to All Subfolders" and "Use Settings for All iViews (Preferred Presentation)".
result:
I see the "ConsumerExplorer" on root folder, the subfolder are sorted by "last modified" (everything ok).
I click on a subfolder, the "TabExplorer" si showed, the Tabs and the content are sorted by "last modified" BUT..
.. into the tabs are showed nameFolders (in link style), the action command, and the properties of "author" and "last modified" (normally into the tabs are showed just the folderNames in text style)...
Why?? Is possible that the "AdminExplorer" parameters of the km folder affect the Tab component??
Thank you

Backup Error - 0x810000E4 Windows Backup has encountered a problem with the backup catalog

Dear all,
I'm trying to backup my files onto a 2TB big external USB disk. My computer is Dell Latitude E4300.
When I run the backup, it runs normally but ends with this error:
0x810000E4 Windows Backup has encountered a problem with the backup catalog
When checking the zip files on the USB drive, it seems that only some of the files have been backed up. The same confirms the restore option when I browse the files in the backup.
When I start the backup again, it continues - i.e. acknowledges the files already there and backs up a additional files but again fails after some time.
Any ideas please.
Thank you,
Tomas

Hello Tomas,
This is not expected.
Could you please collect the backup failure traces from %windir%\Logs\WindowsBackup and send them to my mail-id -
[email protected] (pl. remove -nospam phrase from the id to get the correct one).
Thanks,
Sriram [MSFT]
Sriram [MSFT]

Problem getting the collection objects in Toplinks using JDeveloper11g

Hi All
I am working the Toplinks in JDeveloper11g. I am using the Java Objects From Tables to create the Toplink map .
The problem is I am unable to work with the collection objects. I am getting the collection objects like addtocollection and removefromcollection. when I am dragging the collection object into the form and running the application it is giving errors.
Can any one help me out how to work with this collection objects.
Thanks in advance
Madhavi.

look at the java.util.SortedMap interface, and the classes that implement it. or, re-think your design. why do you want the entries sorted? do you really want that, or do you assume you do? is a Map the right collection here? I'm not saying it isn't, I'm just saying that the sorting requirement sounds like an assumption you need to challenge. generally, we get data out of a Map by explicitly asking for it by key

Problem with Digital Signature strategy in Document Managment System

Hello ALL,
I am facing problem with Digital Signature strategy in DMS. If any help its greatly appreciated.
I have senario where Approvers in DMS will review the document and approve the document and put on their digitial signature. if i have multiple approvers maintained in the characterstics it has to check weather it has been approved by all approvers otherwise it has to reset the status to for approval.
My problem is i am able to reset the status back from approved to for approval using the badi document_status01 but when the next approver logs in to the document and change the status to approved he is not able to get the digital signature pop up which it comes only first user approves it.
can any one help me out on whats going wrong in it.
Thanks
Srikanth Aduri.

Hi,
maybe the reason for this is that the status of the digital signature is not changed. Then the system thinks that the digital signature is still completed and therefore the user is not getting the pop-up again. The database table for the digital signature for documents is TC77. I hope this information is usefull for you.
Best regards,
Christoph

Hello. I have a problem with the iphone. I had the misfortune of Smader it for a half years ago. but now all my pictures away. and I think it is a security various measures. what should I do?

hello. I have a problem with the iphone. I had the misfortune of Smader it for a half years ago. but now all my pictures away. and I think it is a security various measures. what should I do?

ckuan wrote:
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
(Here's that part I'm bolding for you to reference): Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
Exactly. It keeps a collection of the most recent 1000 photos in your Photostream Album on your iOS device. That's the limit of the displayed images on an iOS device. Not the upper limit of storage. It's like the call history. You can have more than 100 calls, but only the most recent 100 calls show on the device. You can still get your entire call history from your wireless carrier. And you can still download all of your Photostream photos from Photostream using iCloud Control panel on a PC, or the iCloud option in System Preferences on a Mac.
iCloud: My Photo Stream and iCloud Photo Sharing limits
http://support.apple.com/kb/HT4858
http://help.apple.com/icloud/#/mmc0cd7e99
My Photo Stream upload limits
The My Photo Stream limits below are established based on anticipated upload patterns. Currently, My Photo Stream upload limits are as follows:
Uploads to My Photo Stream per hour: 1000 photos
Uploads to My Photo Stream per day: 10,000 photos
Uploads to My Photo Stream per month: 25,000 photos
If you exceed one of these limits, your uploads to My Photo Stream will be paused temporarily and you may see a notification message on your device. Your uploads will resume automatically after you no longer exceed one of the limits, such as in the following hour or on the following day.
You can upload 10,000 photos in a single DAY.

FSCM-COL: Problems with the Collection Strategy

Similar Messages

Maybe you are looking for