Problems with the Layout Priority in KM

Hello, I have some problems with the Layout Priority in KM..
I'm using a KM Navigation Iview with "Layout Set"=NewsBrowser (this Layout Set uses a Collection renderer that sorts the folder's contents by "last modified") and "Layout Set Mode"=exclusive.
In the KM folder I setted in Details->Settings->Presentation as "rndSortProperty"=name because I need to order my files by FileName property.
Despite that in see that the contents showed in my iview are ordered by Last Modified...
The "Layout Set Mode" exclusive gives the higher priority to the Folder Settings..
I don't understand..
Thank you in advance.

Thank you Shyja,
your post was helpful, but another issue is occurred.
Maybe en example could be useful..
My scenario:
- I need to show a km folder with layout set "ConsumerExplorer" on root folder (no "property of sorting" setted on its collection renderer) and "TabExplorer" (no "property of sorting" setted on its collection renderer).
- I need to sort files and folders by "last modified". By default seems that they are sorted by "name".
- With my administrator user I open my folder details (in Content Admin->KM Content is used the Layout "AdminExplorer"), and in "Settings->Presentation->Additional Parameters" I add two parameters "rndSortOrder=descending" and "rndSortProperty=modified" (the others are parameters of AdminExplorer Layout).
- Then I check "Apply Settings to All Subfolders" and "Use Settings for All iViews (Preferred Presentation)".
result:
I see the "ConsumerExplorer" on root folder, the subfolder are sorted by "last modified" (everything ok).
I click on a subfolder, the "TabExplorer" si showed, the Tabs and the content are sorted by "last modified" BUT..
.. into the tabs are showed nameFolders (in link style), the action command, and the properties of "author" and "last modified" (normally into the tabs are showed just the folderNames in text style)...
Why?? Is possible that the "AdminExplorer" parameters of the km folder affect the Tab component??
Thank you

Similar Messages

Problems with the layout in tablet

After finishing my website I wanted to set up my tablet layout. I copyed the objects from homepage and changed the size so it fits in the tablet size. But now it looks like that
www.probilth.com (on tablet)
It's only on the half of the tablet and only if I scroll to the end, it will fit the whole tablet. What have I done wrong?
Thanks
Heike

Hello Heike,
Please go to the page in design view (where this issue occurs, and if it occurs in many pages with the same master page applied, then go to the master page), and select all to see if there is some component lying in the direction from where the page looks blank or shrinked. It may be some component like an empty text frame, or rectangle or similar.
If you find it, remove it and then re-publish/re-upload the site.
Hope this helps.
Cheers
Parikshit

Problem with the progress line in MS Project

Hi there,
I have a question about the progress line in MS Project.
My boss asked me to see how far we were with the work, so I inserted the column '% Complete' and then the progress line.
Now my boss has a problem with the layout and I don't know how the fix it. The problem is at line 43 and 44, where the progress line indicates that we are behind on that group of tasks. But is it possible for the progress line to not indicate it on lines
43 and 44 but only on lines 45 to 50? So my question is if it's possible to make the progress line go down (vertically) over line 43 and 44 instead of jumping to the back?
It would be much more simple if I could insert lines 43 ad 44 as text but not as a task, so that it just counts as a title of some tasks but nothing more than that. Is that possible in Project?
(Lines 45 to 50 are subtasks for line 44, and 44 is a subtask for 43. So line 43 is the main task.)
Normally there was a picture here but I couldn't upload it because my account is not yet verified... So hopefully you can understand the problem with the text.
If anyone could give my some advice or the solution, that would be great!
Thanks in advance!

Hi Thunderbal66--
Basically your activity 43 is late because the sub tasks are also late. Thus MS Project shows the situation by moving the progress line backward. The progress line is automatically displayed based on your project progress, there is no way to manually change
it unless you update your project.
I think the question is not there. This is more a matter of project governance and transparency: why not showin that a project is late when it is late and taking the appropriate corrective actions?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Problem with the browse sequence back and browse sequence next widget placed in the screen layout

Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSBackButton {
                border: none;
a.wBSNextButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSNextButton {
                border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!

hi pradeep
It does not happen but if you Wait for a while that may be solved

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Problem with the GridBagLayout Manager

Hello i am new to Java Swing and i am facing a problem with the GridBagLayout layout manager . the code in question is attached. First compile and run the code. It will execute w/o probs . Then go to the "Console" tab. There the diff components (6 buttons and 1 text area) are haphazardly arranged where as all measures where taken to prevent it in the code. The GridBagLayout manager for this tab is not working properly please help.
The code in question:-
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
     JTabbedPane jtp = new JTabbedPane();
     Container generalContainer; // container for the general pane
     Container consoleContainer; // container for the console pane
     GridBagLayout consoleLayout = new GridBagLayout(); // GridBagLayout for the console
     GridBagConstraints consoleConstraints;// GridBagConstraints for the console
     public MainForm()
          super("Welcome to Grey Griffin -- Network Simulator");
          setSize(700,600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel generalPane = new JPanel();
          generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
          JPanel consolePane = new JPanel();
          consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
          JPanel designPane = new JPanel();
          designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
          JPanel outputPane = new JPanel();
          outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
          //Setting up Layout for all the tabs
           //for general tab
           FlowLayout layout= new FlowLayout();
           generalContainer = generalPane;
           layout.setAlignment(FlowLayout.CENTER);
           generalContainer.setLayout( layout );
           //for console tab
           consoleContainer = consolePane;
           consoleConstraints = new GridBagConstraints();
           // *******Finished********
          //********** All buttons text areas are declared here**********
            //*******for the general tab**********
          JButton generalCreate = new JButton("Create a New Network");
          JButton generalOpen = new JButton("Open an Existing Network");
          JButton generalSave = new JButton("Save the Network");
          JButton generalSaveAs = new JButton("Save As..........");
          JButton generalExit = new JButton("Exit");
          //******END******
         //*******for the console tab
             //text area
          JTextArea consoleCode = new JTextArea();
          consoleCode.setEditable(true);
          consoleCode.setMaximumSize(new Dimension(700,400));
          consoleCode.setAlignmentX(0.0f);
               //text area complete
             //*******for the Console tab**********
          JButton consoleCompile = new JButton("Compile Code");
          JButton consoleSimulate = new JButton("Simulate Code");
          JButton consoleReset = new JButton("Reset");
          JButton consoleOpen = new JButton("Open script files");
          JButton consoleSave = new JButton("Save script files");
          JButton consoleConvert = new JButton("Convert Script files to graphical form");
          //***************END****************
     //Adding buttons and text areas to there respective tabs
          // for the general tab
          generalContainer.add(generalCreate);
          generalContainer.add(generalOpen);
          generalContainer.add(generalSave);
          generalContainer.add(generalSaveAs);
         generalContainer.add(generalExit);
         //****END****
          // for the console tab
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleOpen,0,0,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleSave,1,1,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleConvert,1,2,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleCode,1,0,3,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleCompile,2,0,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleSimulate,2,1,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleReset,2,2,1,1);
          //****END****
          // adding the tabs
          jtp.addTab("General",null,generalPane,"Choose General Options");
          jtp.addTab("Design",null,designPane,"Design your own network!!");
          jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
          jtp.addTab("Output",null,outputPane,"View output");
          getContentPane().add(jtp, BorderLayout.CENTER);
          //****END****
     //This method is used to ad the buttons in the GridBagLayout of the Console tab
     private void addComp( Component c,int row,int column,int width,int height)
        // set gridx and gridy
        consoleConstraints.gridx=column;
        consoleConstraints.gridy=row;
        //set gridwidth and grid height
        consoleConstraints.gridwidth=width;
        consoleConstraints.gridheight=height;
        //set constraints
        consoleLayout.setConstraints(c,consoleConstraints);
        consoleContainer.add(c);
     class TabManager implements ItemListener
          Component tab;
          public TabManager(Component tabToManage)
               tab = tabToManage;
     public void itemStateChanged(ItemEvent ie)
          int index=jtp.indexOfComponent(tab);
         if (index!=-1)
              jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
         MainForm.this.repaint();
public static void main(String args[])
     MainForm form = new MainForm();
     form.setVisible(true);
}

Thanks for the suggestions. I did away with the GridBagLayout Altogether :-D
and put all the buttons in a seperate JPanel and added that JPanel into the Console tabs container which was using a BorderLayout this time. Take a look
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
     JTabbedPane jtp = new JTabbedPane();
     public MainForm()
          super("Welcome to Grey Griffin -- Network Simulator");
          setSize(800,600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel generalPane = new JPanel();
          generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
          JPanel consolePane = new JPanel();
          consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
          JPanel designPane = new JPanel();
          designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
          JPanel outputPane = new JPanel();
          outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
          //Setting up Layout for all the tabs
          //**for the general tab
           Container generalContainer;
           FlowLayout layoutGeneral= new FlowLayout();
           generalContainer = generalPane;
           layoutGeneral.setAlignment(FlowLayout.CENTER);
           generalContainer.setLayout( layoutGeneral );
           //**for the console tab
            Container consoleContainer;
            consoleContainer = consolePane;
            consoleContainer.setLayout(new BorderLayout() );
           //Creating buttonpanel for adding the buttons
            JPanel buttonPanel1 = new JPanel();
            buttonPanel1.setLayout(new GridLayout(1,3));
            JPanel buttonPanel2 = new JPanel();
            buttonPanel2.setLayout(new GridLayout(1,3));
          // All buttons / text areas / images are declared here
          //**Buttons for the general tab**//
          JButton generalCreate = new JButton("Create a New Network");
          JButton generalOpen = new JButton("Open an Existing Network");
          JButton generalSave = new JButton("Save the Network");
          JButton generalSaveAs = new JButton("Save As..........");
          JButton generalExit = new JButton("Exit");
          //declaring the buttons
          JButton consoleCompile = new JButton("Compile");
          JButton consoleRun = new JButton("Run");
          JButton consoleReset = new JButton("Reset");
          JButton consoleOpen = new JButton("Open script files");
          JButton consoleSave = new JButton("Save script files");
          JButton consoleConvert = new JButton("Convert Script files to graphical form");
          //declares the textarea where the code is written
          JTextArea consoleCode = new JTextArea();
          consoleCode.setEditable(true);
          consoleCode.setMaximumSize(new Dimension(500,600));
          consoleCode.setAlignmentX(0.0f);
          //Adding buttons and text areas to there respective tabs
          //**Buttons and text pads for the general tab**
               generalContainer.add(generalCreate);
          generalContainer.add(generalOpen);
          generalContainer.add(generalSave);
          generalContainer.add(generalSaveAs);
             generalContainer.add(generalExit);
          //adding buttons to the button panel 1
          buttonPanel1.add(consoleOpen);
          buttonPanel1.add(consoleSave);
          buttonPanel1.add(consoleConvert);
          //adding buttons to the button panel2
          buttonPanel2.add(consoleRun);
          buttonPanel2.add(consoleReset);
          buttonPanel2.add(consoleCompile);
          //adding button panels and textarea
          consoleContainer.add(buttonPanel1,BorderLayout.NORTH);
          consoleContainer.add(consoleCode,BorderLayout.CENTER);
          consoleContainer.add(new JScrollPane(consoleCode));
          consoleContainer.add(buttonPanel2,BorderLayout.SOUTH);
          //adding the tabs
          jtp.addTab("General",null,generalPane,"Choose General Options");
          jtp.addTab("Design",null,designPane,"Design your own network!!");
          jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
          jtp.addTab("Output",null,outputPane,"View output");
          getContentPane().add(jtp, BorderLayout.CENTER);
     class TabManager implements ItemListener
          Component tab;
          public TabManager(Component tabToManage)
               tab = tabToManage;
     public void itemStateChanged(ItemEvent ie)
          int index=jtp.indexOfComponent(tab);
         if (index!=-1)
              jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
         MainForm.this.repaint();
public static void main(String args[])
     MainForm form = new MainForm();
     form.setVisible(true);
}

Is anyone having problems with the Health App and Withings?

After upgrading to ios 8.1 I am still having a problem getting my Withings Health Mate data to correctly update my Healt Dashboard. The information that does show up on the different Dashboard widgets is way off. For example, I today walked 2400 steps according to Withings, but the Health Dashboard shows 10,700 steps (720,000 in smaller print on another line). It further shows my daily average at 313,000 steps! Ridiculous.
Walking/Running distance for the days shows 22.5 miles with a daily average of 108 miles.....I'm not Barry Allen/The Flash.

My problems with the Healt App are all over the map. The information on Withings Health Mate is totally accurate, and updates immediately. I have their scale (since 2011) and wireless blood pressure monitor. Also, I find the heart rate senson on the iPhone 6 to work well, every time.
This issue for me is with Apple's Health app. I get ridiculous readings on the Dashboards. For example, it shows my daily average in steps as 170,688, and miles walked at 80. Hardly! Additionally, the Dashbord widgets will disappear/reappear for no reason. I have tried switching the priority of data sources for the steps dashboard between Withings and my iPhone 6 (because it is indicated that the top source governs the dashboard info), to no avail.
Lastly, I don't know how to interpret the infomration on the individual dashboards. On the same line as the word "Steps" there is a number, i.e. 14,272 steps, and just under it the word "Today." However, when I switch from "Day," "Week,," "Month," and "Year," those number don't change. Below the word Today is a number (which changes all the time), and at the bottom of the widget, just above the month (October now) is the number 1,149,749. Nice.
I would like to get the Apple Watch next year, but if the Health App cannot be fixed I may not.

Would there be a problem with the warranty in the UK if bought in USA? Plus is there a big difference between US and UK keyboards? Thanks

Hi, I'm from the UK and in the USA for a week. I'm thinking of purchasing an Air. Would there be a problem with the warranty in the UK if bought in the US? Plus is there a big difference between US and UK keyboards?
Cheers
G

There are subtle differences on a British layout, mainly having to do with the top line (shift numbers), to permit the use of European monetary symbols. There are a few other keys different (note the enter key).
Here are the basic layouts. Obviously the MBA won't have an eject key, as the power key resides in that location.
British English Keyboard
USA English Keyboard

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Problems with the Layout Priority in KM

Similar Messages

Maybe you are looking for