FSCM- Credit Exposure Not getting Updated

Hello,
We are implementing FSCM and we dont have XI / PI System . We are implementing BADI ( BADI_SD_CM ) and using implesit enhancement we by pass the XI / PI.
We referred one of the fourum for Direct update method  and works fine. BADI is triggering and While creating order message also displaying but its not updating the credit exposure .
I have copied all the example implementation and method  FSCM_CREDIT_CHECK_ORDER. but method FSCM_COMMITMENT_UPDATE_ORDER is not getting update in the Credit exposure.
Can anyone help me any config issue or Update i need to activate anything in the code . Please suggest.
Regards
Prabu K

Hi Karai,
Couple of things I will point out here. Try them and lets see where we stand.
1. The configuration:
     a. Liability Categories are defined.
     b. Credit Control Area is assigned to all the company codes.
     c. Sales Area assigned to Credit Control Area
     d. Both of these BADIs are activated: UKM_R3_ACTIVATE and BADI_SD_CM.
     e. The following web services are activated
CreditCommitmentNotification_In - Update credit exposure
CreditManagementAccountByIDQuery_In - Provide credit master data
CreditPaymentBehaviourSummaryNotification_In - Update payment behavior summary
CreditWorthinessQuery_In – Carry out credit check
2. Check if queue is not stuck. t-code SMQ1 and queue: UKM_DOCUMENT_PROCESS. If stuck please get it cleared.
3. To rebuild the credit exposure do following:
     a. Use UKM_COMMITMENTS to clear all the exposure.
     b. Execute UKM_RFDKLI20_AR and UKM_RFDKLI20
     c. Execute UKM_TRANSFER_ITEM
     d. Execute UKM_RVKRED07. Make sure nothing is processing at that time as it will put lock on all Sales related tables.
Please let me know if you have any questions.
Regards,
Prateek.

Similar Messages

  • Information in the case folder is not getting updated in Oracle Credit Mgt

    Hi,
    I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
    I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
    PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
    So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.

    Sumit Malik wrote:
    Hi,
    I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
    I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
    PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
    So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.Duplicate post -- Information in the case folder is not getting updated in Oracle Credit Mgt

  • Cred.lim.used  field in FD32 not getting updated

    hi All,
    I have a scenario where my Cred.lim.used field which is a %age value is not getting updated in fd32
    when I go to fd33 for a customer my Credit limit is 1,000,000.00
    and Credit exposure is 1,138.28- but the %age is 0.00 %.
    any suggestions
    thanks,

    Hi
    Think logically how it will show the   credit limit used in percentage just calculate
    credit limit used*100/ total credit limit
    1,138.28*100
    1,000,000.00
    will come to 0.11 % so system wont show it will consider only if it is more than 1%
    regards

  • Letter of Credit Financial Document not getting updated

    Hi,
    I have create a Letter of Credit Financial Doc thur TCode Vx11n. I create a sales order & assigned the financial document to sales order. In log there is no error.
    When I create a Billing Doc & Excise Invoice. The Financial Document values remain same & does not get updated. Please guide.
    Thanks in advance.
    Regards
    Mahi

    Hi Gopala,
    The accounting document has already been released &accounting doc has been created. But the value of Financial Doc i.e Letter of Credit remains same.
    Regards,
    Mahendra

  • Overhead is not getting updated in the production order

    Hi all,
    I am running actual overhead calculation with KGI2.
    But the overheads are not getting updated in the order.
    Order contains relevant overhead key also.
    What could be the possible causes?
    SmanS

    Arun/ Suleman,
    Thank you for your reply.
    I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
    Request you to elaborate it further & explain me how to maintain the same.
    Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
    Mean while I had maintained the required values in costing sheet in KZS2.
    Maintained the % against material overhead rate as well as manufacturing overhead rate.
    Maintained the credit values for the overhead rate.
    Maintained the calculation base values also.
    Now while overhead calculation with KGI2, I am getting two errors as follows,
    1. S:K5:162 E02 20090831
    2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
    I can not figure out the reason.
    SmanS
    Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

  • Open sales order not getting updated in FD32

    HI
    We are configuring Credit management, and found that the open sales orders are not getting updated in FD32.
    I have checked all the settings in OVA8 and all are working fine. This is a Static credit check and system is blocking the customer in case, the limit is exceeded. But the values are not getting reflected in FD32, for open sale orders, that are not blocked.
    Info structure S066  in OMO1 all are configured perfectly. I have run F.28 and no log was issued.
    Request to suggest other reasons for not getting updated in the table.
    I have gone thru the previous threads, but cud not find any solution.
    Regards
    Vamsi Javaji.

    Hi Vamsi Javaji
    First of all check in OVA8 wheather you have checked Open sales orders feild or not . Secondly check in your pricing procedure wheather you have maintained Subtotal A or not for the Net Value .Also check wheather you have assigned to your sales document type correctly or not  Finally check in OMO1 wheather S066 has been assigned correctly or not
    Check wheather you have assigned the Credit control area to the customer in CMR , in sales tab
    Regards
    Srinath

  • CCS Details are not getting updated to COPA in Sales Order Settlement(VA88)

    Dear Experts,
    Our scenario is MTO with valuated material.
    1. Production order is tagged to Sales Order.
    2. Production order is settled to Material and variance is getting posted to COPA.
    3. At the time of Delivery, COGS Debit (Cost Object- Sales Order), Credit - Inventory.
    4. At the time of Billing, Accounting Document is getting generated, COPA document is not getting generated.
    5. We  are not executing WIP. (as per Business process)
    6. Settlement is done thru transaction code VA88. COPA Document is getting generated.
    I am facing the following issues in the above MTO process.
    1. At time of sales order settlement thru VA88, In COPA, only COGS is getting as updated with one value field i.e. Material Cost.  Cost Component data (Material Depreciation, Labor etc..) is not getting updated to COPA.
    2. When I settle the Sales Order thru VA88, Billing Quantity is not getting updated to COPA though Quantity field mapping is done properly.
    Please help me how to resolve the above issues.
    Note: Same Cost Component Structure, we are using for Make to Stock scenario. Cost Component Data is getting updated Properly to COPA  (at the time of Billing)
    Regards,
    vgl
    Edited by: vglokam on Aug 31, 2010 10:52 AM
    Edited by: vglokam on Aug 31, 2010 10:54 AM

    Hi
    1. CCS (Cost Comp Split) wont be updated to COPA if you settle via sale order.. In sale order, COGS cost element is posted.. the same will get settled to COPA as one single value...
    In MTS, the CCS gets updated to COPA upon billing because of the "valuation" strategy customization... Billing posts to COPA in that case, COPA gets Sales Qty and it is valuated with CCS to give you the break up.. But, in your case, Billing is not posting to COPA, but to sales order.. hence, there is no qty flow into COPA upon billing.. thats why you dont get CCS for MTO
    2. The sales qty should be updated to COPA upon VA88.. For this, make the following settings in your PA transfer structure which is used during VA88
    1. Go to KEI1, Select your PA transfer structure...
    2. Add an assignment line in it... Check on "Qty Billed/Delivered" in the assignment line
    3. In the Tab "Value Field" below "source", assign Qty Field
    Now when you settle, it should update qty as well
    regards
    Ajay M

  • FD33 - Receivable Field in Customer master is not getting updated

    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    In SD, we are having the item category but i am not getting how to control for FI documents? How can i make them credit relevant item. Also for special item, we are controlling the same through Transaction code : OBXY - by special GL indicators but what about the normal/general item?
    How can I control the general FI documents having various FI documents type as relevant to credit check?

    Apart from the above,please also check the below:
    FD33 - Receivable Field in Customer master is not getting updated for the FI documents posted in the customer account. I need to know is there any setting either in FI or in SD, which control whether the FI document is relevant to credit check?
    As per me there is no specific control to active the credit active field in FI values unlike for updating the sales values in FD32 we activate credit active for the item cat(VOV7) which will ensure the sales values to update (open order, open delivery and open invoices) in to credit management.
    For FI values to update i think this is inbuilt in the program only.( example update group 000012,15,18 etc).
    Any way coming into query not updating the receivables, please check the below points once again.
    1. Check the whether invoice has accounting document generated or not, make sure that it is generated then only system update the receivables.
    2. Even if the above all points are checked including above all posts,then also still the same issue repeating  then try to run the program RVKRED77, before this first run RVKRED88 and compare this values with FD32.
    thanks,
    Srinu.

  • Credit exposure not correct in SAP

    Hello,
    My company has over 3.2 million accounts in our system and we are coming across the issue of credit exposure not being accurate for customers which is causing credit checks that should not be necessary. It look likes what is happening is that once the open sales order is invoiced the amount is staying locked in the exposure and then it is also added into receivables which is essentially doubling the exposure from what it should be. Is there any configuration changes that we can use to correct this?? With the high volume of customers and transactions on a daily basis this issue is causing a lot of extra work and customer issues. Your assistance is appreciated.
    James

    Hello,
    It happens that LIS is not correctly updated by SAP and that the credit exposure is incorect.
    Have a look at the program RVKRED07. You may have to play with the parameters to find the correct combination for the update.
    PROTB = X
    NOBLOCK = X
    You may consider also setting up a daily batch job ...
    In fact you have 2 progams given by SAP
    RVKRED88, it calls RVKRED07 in test mode
    RVKRED77, it calls RVKRED07 in real mode
    You can also implement the following reoprts
    Z_CREDIT_VALUE_COMPARE (see note 666587 and 864105)
    Z_CREDIT_VALUE_COMPARE_DCC (see note 1040893)
    Other OSS notes for you, depending on you SAP version
    666587
    842058
    864105
    389377
    381789
    Jean-Christophe

  • Dispute case does not get updated with subsequent partial payment

    Hi Experts
    I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
    Process step 004: Change not possible, process step 003 missing
    Message no. UDM_MSG037
    Diagnosis
    The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
    System Response
    The dispute case could not be changed.
    Procedure
    In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
    Your kind feed back is highly appreciated..
    Regards
    Mahmoud EL Nady

    Hi
    Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
    also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
    Regards
    Mahmoud El Nady

  • Register RG23C not getting updated

    Dear Frirnds,
                     Hello! Pl guide me in the following case:
    I am transfering the <b>excisable goods</b> from plant 1 to plant 2 under the same company code by using <b>STO without delivery.</b>
    I did goods issue with 351 mvt in plant 1
    made excise invoice in J1IS in plant 1
    did GR in plant 2.
    captured the excise invocie in plant 2
    <b>the register RG23C part 1 and 2 of the issuing plant 1 are not getting updated?</b>
    Pl help
    Thanks and regards
    Kavita

    Thanks Sai,
                   since I am transfering excisable material from plant 1 to plant2.
    in this case plant 1 cannot take the cenvat credit of material as it is not used to produce the finished product in plant1.
    hence in this case, when i am transfering the excisable material from plant 1 to plant 2,the  plant 2 will take the benefit of cenvat.
    in short : it is the case of transfering the credit from one plant to another when we are transfering the excisable goods.
    so in this case, the system should take out the value from register in plant 1 and post in plant 2.
    when i did GR (capture and post excise invocie) in plant2, the debit enteries are refelected in plant 2 registers.
    but no enteries are appearing in plant 1 registers
    Am I doing the wrong process steps.
    pl guide what is the right way of doing this process?
    thanks and regards
    Kavita

  • System Status ACPT not getting updated

    Dear All,
    In some cases, I am noticing that system status is not getting updated on WBS, even thought the WBS is there in the Sales Order line item.
    Can anyone tell what can be the cause of this.
    Sales Order header data is same in both the cases (WBS with or without ACPT). Only material is different.
    Regards
    Shubham

    Hi Shubam,
    Thank you for sharing the details.
    Yes, let us conclude as follows (as per my previous reply)
    System Status ACPT will not be updated ...
            1) if the pricing condition is not updated in the sales order (or the net value is zero in the sales order).
           2) if the sales order is under credit block.
    Thanks
    abdul.
    abdul khader wrote:
    > I think because of the price (0 value). for credit block also system wont update.
    >
    >

  • 544 Movement ,Qty & value is not getting updated in MC.9

    Dear friends,
    MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting   G  in OMJJ.
    I require the info about MC.9 configuration or any info related to this.

    Hi,
    Please refer SAP note 581240 for this.
    For these stocks you have three valuation types for selection:
    ' ' = no inventory valuation
    'A' valuation = without reference to sales document ('make-to-stock
    inventory')
    'M' = separate valuation with reference to the sales and distribution
    document/project
    ONLY stock/stock movements with special stock valuation 'A'
    (make-to-stock inventory) are updated in Inventory Controlling.
    Thus, if you find a document which is not updated in the info structures
    of Inventory Controlling (S031-S039) and you require this, check the
    corresponding documents in the materials management tables. You can find
    the special stock indicator and indicator of the valuation of the
    special stock, for example, in document segment table MSEG in the
    following fields:
    MSEG-SOBKZ = Special Stock Indicator
    MSEG-KZBWS = Indicator: Special Stock Valuation
    Only A type (make to stock ) are updated in the info structures.
    Hoping this helps.
    Regards,
    Rajesh.

  • Master Data is not Getting Updated Properly.

    Dear Expert,
    I am trying to pull the data by Info package but The text is not getting updated.
    The Master data object is    0BPARTNER .  To update this Master data , we ghave 2 info packages
    0BPARTNER_ATTR   and    0BPARTNER_TEXT.    But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
    What could be the Reason for this and How can I solve this issue  ?
    Tahnks,
    Utpal

    Hi,
    Could you please check the data in RSA3.
    If everything is there in R/3 side.Then,please check are you giving any
    condition in the infopackage .
    Please run the infopackage without giving any condition.
    Thanks,
    Saveen Kumar

Maybe you are looking for

  • "urgent" pls help: How to remove name space form message in call to WS

    Hi I am calling a WS from my BPEL process. In the BPEL process I call the WS by referring to the URI of the WS in the partner link. The process works fine. But I have a problem with the message size. The WS does not accept Message size greater than 1

  • Delivery Date Format in PO !!!

    Hi Friends , I am uploading the delivery date from an input file to create a PO using BAPI_PO_CREATE1 . Before the BAPI call i see in t_poschedule-delivery_date = 08012006.This is the correct date which needs to be uploaded in PO .  But after the BAP

  • GetOrderByClause() Not Working???

    I have noticed that ViewObject getOrderByClause() method always return null if order by clause is not set explicitly using setOrderByClause(). For example in this case: String myQuery = "select * from employees order by last_name, first_name"; ViewOb

  • Lost icons on button mba 2012 mountain lion

    After waking up my mba, I found all the icons on buttons, such as arrows, share button, are all missed. The button turned to be a blank square. After restarting, it did not change. Please help me! Thanks!

  • Incompatible au's

    I am using 2 incompatible au's in Logic Ex8, (and they work fine). At start up I get the annoying reminder that I'm using them, and my question is , how can I stop that box from popping up at startup? (ie aside from disabling them)