FTP Adapter error: SLDAccess

Hello everyone!
When XI picks up an XML using the FTP adapter (sender), I get this error message:
<b><i>Error: com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.</i></b>
in the Comm. Channel monitoring. No message is processed in the Integration Engine.
Would anyone know what could be causing this error?

Hi,
Check if your FTP adapter is working.
Also check connection between XI and FTPSERVER.
Regards,
AKshay Jamgaonkar.
Reward points if find useful.

Similar Messages

Sending Email When FTP Adapter Errors Out

Hello everyone,
I am developing a very simple interface to grab a file from a directory and ftp it to a partner's server. Now I want to be able to check if an error occurs when I send the file so I can send a notification e-mail to the administrator and move the file to an Error-Archive directory.
Some of the errors that could happen are:
1. Partner server is down
2. FTP Username or password is wrong
3. FTP account does not have permissions to write to the Partner server
4. ...etc
I have defined an Integration process and for the block where I ftp my file, I defined an exception which I catch in an exception branch. In the Exception branch, I have then defined steps to send notification emails and move the file to an error-archive directory. But unfortunately all the steps of the Integration Process seems to pass, although the FTP Adapter throughs an error.
I'm not sure how can I get the FTP adapter errors to be passed back to my integration process. I already searched in the service market place for OSS notes and also searched the SDN but I can't find any helpful information.
There is one OSS note, 821267, that mentions the use of System Acknowledgements. I'm not sure if this will help me and I don't know how to set it up.
Does anyone have any ideas on how to handle this particular scenario? Did anyone implement System Acknowledgements with the File/FTP adapter?
Any help is greatly appreciated

Hi,
To do the alert configuration as suggested, please go through the information below.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope I have answered your queries. If u want help with anything else please do reply back.
Regards,
abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

FTP Adapter Errors out while translating

Hi,
I am using a FTP adapter to put a text file using a bpel process. But the FTP adapter errors out with the following error:oracle/xml/parser/schema/XMLSchema
Is there a way to fix this issue?? Please advise.
Thanks
PS

Hi,
To do the alert configuration as suggested, please go through the information below.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also just check if this batch program (RSALERTPROC) is running or not.
The links below on Alert Management (ALM) will be of good help to you:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm
Meanwhile look at these forum threads also:
Alerts not getting triggered from Adapter Framework
Alert Configs...
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope I have answered your queries. If u want help with anything else please do reply back.
Regards,
abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

FTP Adapter Error

Hi all,
I have written a FTP adapter to read files from a remote FTP server.
I have done all the settings as per the Oracle tutorial on FTP adapter.
But I am getting errors while reading the files.
Following is the part of the error trace in the log file:
<FTP Adapter::Inbound> Translation failed as translator returned invalid lineNumber,columnNumber=null,null. Debatching checkpoint functionality will not work. Please raise a support request.
<2006-12-13 12:07:47,795> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Failed to translate file : {/ABC204\NShipment.txt}
<2006-12-13 12:07:47,810> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Sending message to Adapter Framework for rejection to user-configured rejection handlers : {
file=/ABC204\NShipment.txt, Exception=ORABPEL-11211
DOM Parsing Exception in translator.
DOM parsing exception in inbound XSD translator while parsing InputStream.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
<2006-12-13 12:07:47,810> <WARN> <default.collaxa.cube.activation> <AdapterFramework::Inbound> [Get_ptt::Get(ShipmentTransaction)] - onReject: The resource adapter 'FTP Adapter' requested handling of a malformed inbound message. However, the following bpel.xml activation property has not been defined: 'rejectedMessageHandlers'. Please define it and redeploy the business process. Will use the default Rejection Directory file://D:\OraBPELPM_1\integration\orabpel\domains\default\archive\jca\Feeder204_12062006\rejectedMessages for now.
<2006-12-13 12:07:47,810> <WARN> <default.collaxa.cube.activation> <AdapterFramework::Inbound> [Get_ptt::Get(ShipmentTransaction)] - onReject: Sending invalid inbound message to Exception Handler:
Also, we can read xml files using FTP adapter as well, right?
Any inputs are highly appreciated.
Thanks,
Pram

Hi all,
I have written a FTP adapter to read files from a remote FTP server.
I have done all the settings as per the Oracle tutorial on FTP adapter.
But I am getting errors while reading the files.
Following is the part of the error trace in the log file:
<FTP Adapter::Inbound> Translation failed as translator returned invalid lineNumber,columnNumber=null,null. Debatching checkpoint functionality will not work. Please raise a support request.
<2006-12-13 12:07:47,795> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Failed to translate file : {/ABC204\NShipment.txt}
<2006-12-13 12:07:47,810> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Sending message to Adapter Framework for rejection to user-configured rejection handlers : {
file=/ABC204\NShipment.txt, Exception=ORABPEL-11211
DOM Parsing Exception in translator.
DOM parsing exception in inbound XSD translator while parsing InputStream.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
<2006-12-13 12:07:47,810> <WARN> <default.collaxa.cube.activation> <AdapterFramework::Inbound> [Get_ptt::Get(ShipmentTransaction)] - onReject: The resource adapter 'FTP Adapter' requested handling of a malformed inbound message. However, the following bpel.xml activation property has not been defined: 'rejectedMessageHandlers'. Please define it and redeploy the business process. Will use the default Rejection Directory file://D:\OraBPELPM_1\integration\orabpel\domains\default\archive\jca\Feeder204_12062006\rejectedMessages for now.
<2006-12-13 12:07:47,810> <WARN> <default.collaxa.cube.activation> <AdapterFramework::Inbound> [Get_ptt::Get(ShipmentTransaction)] - onReject: Sending invalid inbound message to Exception Handler:
Also, we can read xml files using FTP adapter as well, right?
Any inputs are highly appreciated.
Thanks,
Pram

FTP Adapter errors out while writing a file

Hi ,
I am facing this problem while using FTP adapter tries to write a file on a specific remote machine.The Adapter throws this following error:
Missing class: oracle.tip.adapter.api.TranslationAware
     Dependent class: oracle.tip.adapter.file.outbound.FileInteractionSpec
     Loader: global.libraries:1.0
     Code-Source: /XXX/ias/product/asmt_10131/j2ee/oc4j_soa/applib/fileAdapter.jar
     Configuration: <code-source> in /XXX/ias/product/asmt_10131/j2ee/oc4j_soa/config/server.xml
The missing class is available from the following locations:
     1. Code-Source: /XXX/ias/product/asmt_10131/bpel/lib/orabpel.jar (from <code-source> in /XXX/ias/product/asmt_10131/j2ee/oc4j_soa/config/server.xml)
     This code-source is available in loader oracle.bpel.common:10.1.3.
</summary>
Any Suggestions will be helpful.
Thanks
PS

Hi Rama Krishna
Are you saying that you are transferring data of your
internal table to another server using a FM??? Am not
sure if that can be done.
How about trying this way????
Download the data to a file on your application
server, using open dataset statement. Then transfer this
file to the other server using FM's FTP_CONNECT, FTP_COMMAND ....
Kind Regards
Eswar

10.1.3.4 - FTP adapter error while file get

I created an esb service that reads from a remote server and processes the file locally. It works fine in dev. When I migrated my esb flow to a test environment it is now throwing some error.
<AdapterFramework::Inbound> Adapter Framework instance: OraESB - successfully completed endpointActivation for portType=Get_ptt, operation=Get
<FTP Adapter::Inbound> Connection Created
<FTP Adapter::Inbound> Unable to list files from '/apps/EDI/Archive/OutBound/Customer' directory on 'corpapp10' server; FTP command[NLST] returned unexpected reply code : 550
<FTP Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11430
Error in listing files in the remote directory.
Unable to list file in remote directory.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
The dev remote server and the test remote server are different. I have done the obvious checks about server name, permissions, directory names etc. I can login to the server using windows ftp however when I go the inbound directory and type in ls, i get the following error - 550 Arguments too long. I have some 37000 files in the directory. ls -l works fine.
I switched the ftp adapter to poll a different directory which only has 1 file, but it still gives the same error. However in this case, the windows ftp is able to list the files using ls command.
any idea how i can make this work ?

i undeployed the esb project and deploying it again. Now even worse, nothing happens now. It has stopped polling at all. I just see the following message in the opmn.log, but none of the files get picked up.
<FTP Adapter::Inbound> Connection Created
<FTP Adapter::Inbound> Connection Created
<FTP Adapter::Inbound> Connection Created
To be sure, I deployed it to another environment (DEV) and it works ok there.

FTP Adapter Error time out

Hi
I have read that a polling files from an FTP server windows but I had some problems because the polling ejecutarce to mark the following error log
<2009-06-01 20:44:52,822> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Managed Connection Created
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Adding Event Listener
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Creating Connection
<2009-06-01 20:44:52,822> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection Created
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection manager allocated connection :oracle.tip.adapter.ftp.FTPConnection@1e2d982
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host name is 'MyHost'.
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Reading reply from MyHost
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHost FTP command: USER cajero
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: USER, reply:
331 Password required for cajero.
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHostFTP command: PASS
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: PASS, reply:
230 User cajerologged in.
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHost FTP command: PASV
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: PASV, reply:
227 Entering Passive Mode (192,168,0,150,15,190).
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Passive: ip = 192.192.0.192, port = 4030
<2009-06-01 20:44:52,822> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connecting to MyHost:4030
<2009-06-01 20:44:52,838> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHost FTP command: NLST C:\pub\cashier
<2009-06-01 20:44:52,838> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: NLST, reply:
125 Data connection already open; Transfer starting.
<2009-06-01 20:44:52,838> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Control socket being read by [JCA-work-instance:FTP Adapter-4]
<2009-06-01 20:44:52,931> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Control socket read failed by [JCA-work-instance:FTP Adapter-4] DATA=[TIMEDOUT] in [93 msecs]
<2009-06-01 20:44:52,931> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@1e2d982
<2009-06-01 20:44:52,931> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTPManagedConnection::destroy called, closing physical socket
<2009-06-01 20:44:52,931> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Clearing Event Listeners
<2009-06-01 20:44:53,088> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> afterDelivery() is invoked
<2009-06-01 20:44:53,088> <DEBUG> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Committing JTA transaction com.evermind.server.ApplicationServerTransactionManager@1961a07
I have already changed the timeout of transactions in the following files:
SOA_HOME\j2ee\oc4j_soa\config\transaction-manager.xml
greater thanorion-ejb-jar.xml
SOA_HOME\j2ee\oc4j_soa\application-deployments\orabpel\ejb_ob_engine\orion-ejb-jar.xml
less than transaction-manager.xml
SOA_HOME\bpel\domains\domain_name\config\domain.xml
less than orion-ejb-jar.xml
but the error continues. I need your help pls be grateful
Greetings

JDT
In making the execution of an interface that executes the method SynchRead and review the log. I realized that the same brand message timeout single interface that works well.
<2009-06-02 13:37:50,177> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> ResourceAdapterMetaData Connection Created
<2009-06-02 13:37:50,177> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/F:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPEL_REGISTRO_COB_1.0_e24ce5bd36c213c5eba6a75bc9f44618.tmp/FTPArchivosICOMS.wsdl [ SynchRead_ptt::SynchRead(Empty,Pagos) ] - Using JCA Connection Pool - max size = <unbounded>
<2009-06-02 13:37:50,193> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Managed Connection Created
<2009-06-02 13:37:50,193> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Adding Event Listener
<2009-06-02 13:37:50,193> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Creating Connection
<2009-06-02 13:37:50,193> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection Created
<2009-06-02 13:37:50,193> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection manager allocated connection :oracle.tip.adapter.ftp.FTPConnection@1f8aab0
<2009-06-02 13:37:50,193> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Creating FTPInteraction
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Creating an FTPSender
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Sender created
<2009-06-02 13:37:50,224> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTPInteraction Created
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP outbound adapter interaction invoked : oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec@13a6c6f
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FileInteraction::PROPS ====>{}
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Considering header for filename, output filename from header: PGLINEAS1-090508133556.txt
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Considering header for directoryName, directoryName from header: Cashier
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Agent Determined
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTPSource::Local Temp Directory is F:\product\10.1.3.1\OracleAS_1\j2ee\home\fileftp\temp_ftp\localhost_default_BPEL_REGISTRO_COB~1.0_\outbound
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Host: myHost
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Post: 21
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Username: myuser
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Keep Connections: true
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP outbound adapter read file interaction invoked.
<2009-06-02 13:37:50,224> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Outbound File Adapter received request to read file with parameters: { Directory=Cashier, FileName=PGLINEAS1-090508133556.txt, DeleteFile=false}, headers=[_directory=[Cashier], _filename=[PGLINEAS1-090508133556.txt], _props=[{}]]
<2009-06-02 13:37:50,240> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Creating Temp File mDGwM+l2LhBE8Qq9VFaD1Q== Local Path: F:\product\10.1.3.1\OracleAS_1\j2ee\home\fileftp\temp_ftp\localhost_default_BPEL_REGISTRO_COB~1.0_\outbound Remote Dir: Cashier
<2009-06-02 13:37:50,240> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Calling getContentsAsStream() on FTPAgent: myHost: type = FTP, host = myHost:21, username = myuser
directory = null, mode = STREAM, fileType = ASCII, maxRetries = 0 Localfile: PGLINEAS1-090508133556.txt Path: F:\product\10.1.3.1\OracleAS_1\j2ee\home\fileftp\temp_ftp\localhost_default_BPEL_REGISTRO_COB~1.0_\outbound\mDGwM+l2LhBE8Qq9VFaD1Q== Remote Dir: Cashier
<2009-06-02 13:37:50,240> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host name is 'myHost'.
<2009-06-02 13:37:50,240> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Reading reply from myHost
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host myHost FTP command: USER myuser
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: USER, reply:
331 Password required for myuser.
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host myHost FTP command: PASS
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: PASS, reply:
230 User myuser logged in.
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTPAgent::absoluteFilePath called with[Cashier], file=[PGLINEAS1-090508133556.txt]
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host myHost FTP command: PASV
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: PASV, reply:
227 Entering Passive Mode (192,168,0,150,4,46).
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Passive: ip = 192.192.0.192, port = 1070
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connecting to myHost:1070
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host myHost FTP command: TYPE I
<2009-06-02 13:37:50,255> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: TYPE, reply:
200 Type set to I.
<2009-06-02 13:37:50,271> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host myHost FTP command: RETR Cashier\PGLINEAS1-090508133556.txt
<2009-06-02 13:37:50,271> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: RETR, reply:
125 Data connection already open; Transfer starting.
<2009-06-02 13:37:50,287> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Control socket being read by [AJPRequestHandler-HTTPThreadGroup-64]
<2009-06-02 13:37:50,380> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Control socket read failed by [AJPRequestHandler-HTTPThreadGroup-64] DATA=[TIMEDOUT] in [93 msecs]
<2009-06-02 13:37:50,380> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Returning local file: mDGwM+l2LhBE8Qq9VFaD1Q== Path: F:\product\10.1.3.1\OracleAS_1\j2ee\home\fileftp\temp_ftp\localhost_default_BPEL_REGISTRO_COB~1.0_\outbound\mDGwM+l2LhBE8Qq9VFaD1Q==
<2009-06-02 13:37:50,427> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Created translator : oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl@112ff56
<2009-06-02 13:37:50,459> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Completed translation for : Cashier\PGLINEAS1-090508133556.txt
Thank you...
Edited by: user10655677 on Jun 2, 2009 9:57 AM

SOA FTP Adapter error

Ok so i created a new project an ESB project, i went to my ESB console and create a service/group to use. I placed an ftp adpter called get ( to get), Then i choose ascii and the opration of get for that adapter. The jndi name i choose was one inside my oc4j.xml file that has settings Ex. my username and password to ftp to my unix server (we will call FtpConnect1) it ask for directory to query(Ex. /home/ryan) file names (Ex. i tried *.txt Also i tried ryan123.txt <---- exact file name) then it created this file adapter with a get_RS by default.
Then i dragged another FTP adapter over into the workspace. called this on put and again same jndi name (im testing now, i want to just ftp from one directory on FtpConnect1 to another directory on FtpConnect1) (home/ryan/test <------ destination) i choose ascii and defined it as put operation.
Then by default this one did not come with its own RS attached so i created one so that it would connect to Get_RS to the Put_RS to the Put ftp adater connection. Now this was about 80 % fully explained if you need more info i can supply it, also im doing native schema just want to take whole file from point A to point B. Do you see any errors that might be possible in my quest to take over the world :)
Forgot to mention my problem :) well first off it deploys fine everything successful esb console shows it as valid also. But it just does not work!!!!! Like will not transfer the file
Message was edited by:
vande

Match the hosts file of both the machine. which OS you are working with?
Regards,
Anuj

Moving big files(600MB) with FTP Adapter error The IO operation failed

I everybody, I have the next trouble:
I need to move big files from one server to another remote server through ftp protocol. All the configuration is correct and I am able to move little files
with no problem, but when I move big files the server shows the next error:
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'readEBS'
failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][NONE]" IO operation for "/tmp/TestLogSOA/DetalleCostos3333333.dvd"
failed. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_NOTA start() failed on
resource 'SOADataSource_ohsdomain': XAER_NOTA : The XID is not valid oracle.jdbc.xa.OracleXAException at
oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1532) at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:321) at
weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:51) at weblogic.jdbc.jta.DataSource.start(DataSource.java:722) at
weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1228) at
weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161) at
weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:297) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507) at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434) at
weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1592) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1496) at
weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396) at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.getConnection(XMLDocumentManagerImpl.java:623) at
oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:208) at
sun.reflect.GeneratedMethodAccessor1534.invoke(Unknown Source) at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at
org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at
org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at
org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at
org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at
org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy285.insertDocument(Unknown Source) at
oracle.integration.platform.instance.store.MessageStore.savePayload(MessageStore.java:244) at
oracle.integration.platform.instance.store.MessageStore.savePayloads(MessageStore.java:99) at
oracle.integration.platform.instance.InstanceManagerImpl.persistPayloads(InstanceManagerImpl.java:773) at
oracle.integration.platform.instance.InstanceManagerImpl.persistReferenceInstanceBean(InstanceManagerImpl.java:1106) at
oracle.integration.platform.blocks.adapter.AbstractAdapterBindingComponent.createAndPersistBindingInstance(AbstractAdapterBindingComponent.java:502)
at oracle.integration.platform.blocks.adapter.AdapterReference.createAndPersistBindingInstance(AdapterReference.java:356) at
oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:171) at
oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139) at
oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179) at
Thanks!!!

Hi idavistro,
You can try setting the XA Transaction Timeout for SOADataSource.
1. Log in to the WebLogic Admin Console.
2. Select in the left tree: Services-> Datasources-> SOADataSource->Transaction.
2. Select Set XA Transaction Timeout.
3. Set XA Transaction Timeout to 0.
4. Restart the server and check if the error still appears.
Regards,
Neeraj Sehgal

BPEL FTP Adapter Error : Error ModificationTimeFormat

Hi ,
I have a requiremnt to copy a file from FTP server and put that file into my Local Machine .
For that I have created a BPEL Process .
One Partner Link ( FTP ) - There is a option to "delete the file " . I dont want this option , Because I want to copy the file from FTP server to Local Machine not to move the file .
If I check this " Delete the File " option , instance is sucessfully created and files get moved from FTP server to Local Machine .
My Question is : I want to "copy" the file from FTP Server to Local Machine , so I deselected the option " Delete the file " . After that I set Time Modification and Format .
But When I deploy this BPEL process I am getting the follwing error .
[u]<2007-01-22 11:24:21,164> <DEBUG> <default.collaxa.cube.ws> <FileAdapter::Outbound> PollWork is calling onFatalError for exception Failed to get file modification time.
Could not get file modification time for file :/MySharedFolders/Testpdf_folder\P
LSQL Fundamentals - II.pdf. Verify that the values for the "ModificationTimeFor
mat" activation parameter are correct.Ensure the time format pattern and filenam
e begin index and end index are specified according to the specific FTP server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
Please help me out how to get rid of this problem .
Thanks
Prashant

Hi ,
I have a requiremnt to copy a file from FTP server and put that file into my Local Machine .
For that I have created a BPEL Process .
One Partner Link ( FTP ) - There is a option to "delete the file " . I dont want this option , Because I want to copy the file from FTP server to Local Machine not to move the file .
If I check this " Delete the File " option , instance is sucessfully created and files get moved from FTP server to Local Machine .
My Question is : I want to "copy" the file from FTP Server to Local Machine , so I deselected the option " Delete the file " . After that I set Time Modification and Format .
But When I deploy this BPEL process I am getting the follwing error .
[u]<2007-01-22 11:24:21,164> <DEBUG> <default.collaxa.cube.ws> <FileAdapter::Outbound> PollWork is calling onFatalError for exception Failed to get file modification time.
Could not get file modification time for file :/MySharedFolders/Testpdf_folder\P
LSQL Fundamentals - II.pdf. Verify that the values for the "ModificationTimeFor
mat" activation parameter are correct.Ensure the time format pattern and filenam
e begin index and end index are specified according to the specific FTP server.
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
Please help me out how to get rid of this problem .
Thanks
Prashant

FTP Adapter Operation Get

hello all
I have a BPEL process in which I implement an FTP read the files on a server every time they are updated or loaded for the first time but I can not get it. Looking at the log I found what's next:
<2009-06-02 16:39:29,229> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Managed Connection Created
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Adding Event Listener
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Creating Connection
<2009-06-02 16:39:29,229> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection Created
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection manager allocated connection :oracle.tip.adapter.ftp.FTPConnection@d313d6
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host name is 'MyHostFTP'.
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Reading reply from MyHostFTP
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHostFTP FTP command: USER MyUserFTP
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: USER, reply:
331 Password required for MyUserFTP.
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHostFTP FTP command: PASS
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: PASS, reply:
230 User MyUserFTP logged in.
<2009-06-02 16:39:29,229> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHostFTP FTP command: PASV
<2009-06-02 16:39:29,244> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: PASV, reply:
227 Entering Passive Mode (192,168,0,150,5,25).
<2009-06-02 16:39:29,244> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Passive: ip = 168.168.168.168, port = 1305
<2009-06-02 16:39:29,244> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connecting to MyHostFTP:1305
<2009-06-02 16:39:29,244> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Host MyHostFTP FTP command: NLST C:\ftpFiles
<2009-06-02 16:39:29,244> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTP Command: NLST, reply:
125 Data connection already open; Transfer starting.
<2009-06-02 16:39:29,244> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Control socket being read by [JCA-work-instance:FTP Adapter-11]
<2009-06-02 16:39:29,354> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Control socket read failed by [JCA-work-instance:FTP Adapter-11] DATA=[TIMEDOUT] in [110 msecs]
<2009-06-02 16:39:29,354> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@d313d6
<2009-06-02 16:39:29,354> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> FTPManagedConnection::destroy called, closing physical socket
<2009-06-02 16:39:29,354> <DEBUG> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Clearing Event Listeners
without obtaining the contents of files. This is my wsdl
<definitions
name="FTP_Polling"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/FTP_Polling/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/ftp/FTP_Polling/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:imp1="http://TargetNamespace.com/FTP_Cobranza"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/" location="ftpAdapterInboundHeader.wsdl"/>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" >
<import namespace="http://TargetNamespace.com/FTP_Cobranza" schemaLocation="CAJEROS.xsd" />
</schema>
</types>
<message name="Pagos_msg">
<part name="Pagos" element="imp1:Pagos"/>
</message>
<portType name="Get_ptt">
<operation name="Get">
<input message="tns:Pagos_msg"/>
</operation>
</portType>
<binding name="Get_binding" type="tns:Get_ptt">
<pc:inbound_binding />
<operation name="Get">
<jca:operation
FileType="ascii"
LogicalDirectory="FtpFiles"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
DeleteFile="true"
IncludeFiles=".*\.txt"
ExcludeFiles=".*corte.*\.txt"
PollingFrequency="120"
MinimumAge="60"
OpaqueSchema="false" >
</jca:operation>
<input>
<jca:header message="hdr:InboundHeader_msg" part="inboundHeader"/>
</input>
</operation>
</binding>
<service name="FTP_Polling">
<port name="Get_pt" binding="tns:Get_binding">
<jca:address location="eis/Ftp/FtpAdapter" UIincludeWildcard="*.txt" UIexcludeWildcard="*corte*.txt" />
</port>
</service>
<plt:partnerLinkType name="Get_plt" >
<plt:role name="Get_role" >
<plt:portType name="tns:Get_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
and I also changed the bpel.xml
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="FTP_Polling">
<property name="portType">Get_ptt</property>
<property name="FtpFiles">C:\ftpFiles</property>
</activationAgent>
I hope someone can help me with my problem.
Greetings
Edited by: user10655677 on 2/06/2009 05:13 PM

Hello
The problem: I was sending the wrong direction where should look the files in the FTP. The correct way to send is as follows:
My FTPService.wsdl
<binding name="Get_OpenBatch_binding" type="tns:Get_OpenBatch_ptt">
<pc:inbound_binding/>
<operation name="Get_OpenBatch">
<jca:operation FileType="ascii"
PhysicalDirectory="Cashier"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
ExcludeFiles=".*corte.*\.txt"
DeleteFile="true"
PollingFrequency="60"
MinimumAge="0"
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
OpaqueSchema="false"/>
<input>
<jca:header message="hdr:InboundHeader_msg" part="inboundHeader"/>
</input>
</operation>
</binding>
<service name="FTPOpenBatch_RegCob">
<port name="Get_OpenBatch_pt" binding="tns:Get_OpenBatch_binding">
<jca:address location="eis/Ftp/FtpAdapter" UIexcludeWildcard="*corte*.txt"/>
</port>
</service>
<plt:partnerLinkType name="Get_OpenBatch_plt">
<plt:role name="Get_OpenBatch_role">
<plt:portType name="tns:Get_OpenBatch_ptt"/>
</plt:role>
</plt:partnerLinkType>
</definitions>
look does not remove the attributes FileModificationTime and ModificationTimeFormat, as recommended in many blogs
and my bpel.xml
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="FTPOpenBatch_RegCob">
<property name="portType">Get_OpenBatch_ptt</property>
<property name="Cashier">Cashier</property>
</activationAgent>
</activationAgents>
here I specify the logic directory where are the files.
If you like you can check where the post was given to the problem follow:
FTP Adapter Error time out: FTP Adapter Error time out
I hope this work.
Greetings

Error while deploying a process with FTP Adapter

Hi All,
I am using JDev 10.1.3.3 and SOA 10.1.3.3
I am using FTP Adapter to get a file from a remote location in a empty Process.
I have checked delete files option and using logical directory.
While deploying i am getting the below error.
A problem occured while connecting to server "XXXX" using port "XXXX": bpel_APACSHPREQ940PassThroughBPELOB_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
Could not initialize activation agent.
An error occured while initializing an activation agent for process "APACSHPREQ940PassThroughBPELOB", revision "1.0".
Please ensure that the activation agents are configured correctly in the bpel deployment descriptor (bpel.xml).
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
Please help me out....
Regards
PavanKumar

Hi Krishna,
Not Working
<definitions
name="GetPSOJapanPassThroughFile"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOJapanPassThroughFile/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOJapanPassThroughFile/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:opaque="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/" location="ftpAdapterInboundHeader.wsdl"/>
<types>
<schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns="http://www.w3.org/2001/XMLSchema" >
<element name="opaqueElement" type="base64Binary" />
</schema>
</types>
<message name="Get_msg">
<part name="opaque" element="opaque:opaqueElement"/>
</message>
<portType name="Get_ptt">
<operation name="Get">
<input message="tns:Get_msg"/>
</operation>
</portType>
<binding name="Get_binding" type="tns:Get_ptt">
<pc:inbound_binding />
<operation name="Get">
<jca:operation
FileType="ascii"
LogicalDirectory="GETPSOPTFILE"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
DeleteFile="true"
IncludeFiles="PSO.*\.dat"
PollingFrequency="6"
MinimumAge="0"
OpaqueSchema="true" >
</jca:operation>
<input>
<jca:header message="hdr:InboundHeader_msg" part="inboundHeader"/>
</input>
</operation>
</binding>
<service name="GetPSOJapanPassThroughFile">
<port name="Get_pt" binding="tns:Get_binding">
<jca:address location="eis/Ftp/APACFtp" UIincludeWildcard="PSO*.dat" />
</port>
</service>
<plt:partnerLinkType name="Get_plt" >
<plt:role name="Get_role" >
<plt:portType name="tns:Get_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>
Working
<definitions
name="GetPSOPassthroughFile"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOPassthroughFile/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/ftp/GetPSOPassthroughFile/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:opaque="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
>
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/" location="ftpAdapterInboundHeader.wsdl"/>
<types>
<schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
xmlns="http://www.w3.org/2001/XMLSchema" >
<element name="opaqueElement" type="base64Binary" />
</schema>
</types>
<message name="Get_msg">
<part name="opaque" element="opaque:opaqueElement"/>
</message>
<portType name="Get_ptt">
<operation name="Get">
<input message="tns:Get_msg"/>
</operation>
</portType>
<binding name="Get_binding" type="tns:Get_ptt">
<pc:inbound_binding />
<operation name="Get">
<jca:operation
FileType="ascii"
LogicalDirectory="GetPSOFile"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
DeleteFile="false"
IncludeFiles="PSO.*\.dat"
PollingFrequency="6"
MinimumAge="0"
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
OpaqueSchema="true" >
</jca:operation>
<input>
<jca:header message="hdr:InboundHeader_msg" part="inboundHeader"/>
</input>
</operation>
</binding>
<service name="GetPSOPassthroughFile">
<port name="Get_pt" binding="tns:Get_binding">
<jca:address location="eis/Ftp/APACFtp" UIincludeWildcard="PSO*.dat" />
</port>
</service>
<plt:partnerLinkType name="Get_plt" >
<plt:role name="Get_role" >
<plt:portType name="tns:Get_ptt" />
</plt:role>
</plt:partnerLinkType>
</definitions>

FTP Adapter in SOA10.1.3.4.0 MLR4 doesn't work and no errors either

Hi All:
First my env summary:
I have install SOA10.1.3.4.0 (with MLR4) on my laptop (Windows XP). Also I have install Filezilla Server on same laptop.
In Fillezilla, I have configured a ftp location to "F:\MyFTPServer" directory. F drive is a local drive on my laptop. Also I have created a user called "soa" with password "soa" to be able to access this FTP server.
Under F:\MyFTPServer directory, I have 3 sub folders:
In -- to get file
Out -- to drop the file
Archive -- to archive the file after get and drop
I have successfully accessed this ftp server from other computer using either MS-DOS FTP command or FTP software (e.g. WinSCP) as user "soa". I am able to drop file to "In" dirrectory and get file from "Out" directory.
Above confirms my FTP server is ready to be used.
Next, in SOA 10.1.3.4.0 AS console, I have create a new Connection Factory called "*eis/Ftp/myFtpServer*" (there is a seeded one called eis/Ftp/FtpAdapter and I didn't touch/configure it).
the following is the settings for eis/Ftp/myFtpServer
host: my laptop computer name
port: 21
ftpAbsolutePathBegin: /
ftpPathSeparator: /
listParserKey: WIN
username: soa
password: soa
serverType: win
for the rest settings, I leave as default.
Then, I create a simple BPEL process with following components:
One FTP Adapter called "MyFTP" with following parameters:
<jca:operation
FileType="ascii"
PhysicalDirectory="In"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
PhysicalArchiveDirectory="Archive"
DeleteFile="true"
IncludeFiles=".*\.csv"
PollingFrequency="60"
MinimumAge="60"
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
OpaqueSchema="false"
</jca:operation>
<service name="MyFTP">
<port name="GetFile_pt" binding="tns:GetFile_binding">
<jca:address location="*eis/Ftp/myFtpServer*" UIincludeWildcard="*.csv" />
</port>
</service>
I create one Receive activity to get file from "MyFTP" FTP Adapter.
Using above setting, my intention is to poll any file (*.csv) from F:\MyFTPServer\In directory and receive it into my receive activity.
I deployed my project to SOA application server and stop/restart my SOA application once.
Now, the real stuff begins:
I dropped 2 simple, very small (size < 1KB) files called sample.csv and sample2.csv to F:\MyFTPServer\In diretory.
In my domain.log file, I can see my BPEL process is starting polling every 1 minute without any error:
<2010-09-16 15:29:25,015> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-09-16 15:29:25,015> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-09-16 15:30:25,016> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-09-16 15:30:25,016> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
Meanwhile, I am observing Filezilla server log and it clearly said every one minute (the timestamp match to bpel domain.log 100%), user "soa" login to this FTP server and list both files (sample.csv and sample2.csv) in "In" directory. Then it quits.
However, I don't see any BPEL instance is created (In my BPEL project, I have cheched "Create Instance" when create my receive activity). And both files are still there in "In" folder. Per my configuration of "MyFTP" FTP adapter, the file should be deleted after it is polled successfully (*DeleteFile*="true")
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> USER soa
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 230 Logged on
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> PWD
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 257 "/" is current directory.
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> PASV
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 227 Entering Passive Mode (10,1,90,187,13,110)
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> NLST /In
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 150 Connection accepted
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 226 Transfer OK
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> USER soa
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 230 Logged on
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> MDTM /In/sample.csv
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 213 20100916184802
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> QUIT
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 221 Goodbye
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> disconnected.
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> USER soa
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 230 Logged on
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> MDTM /In/sample2.csv
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 213 20100916184802
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> QUIT
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 221 Goodbye
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> disconnected.
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> disconnected.
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> USER soa
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 230 Logged on
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> PWD
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 257 "/" is current directory.
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> PASV
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 227 Entering Passive Mode (10,1,90,187,13,130)
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> NLST /In
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 150 Connection accepted
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 226 Transfer OK
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> USER soa
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 230 Logged on
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> MDTM /In/sample.csv
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 213 20100916184802
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> QUIT
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 221 Goodbye
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> disconnected.
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> USER soa
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 230 Logged on
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> MDTM /In/sample2.csv
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 213 20100916184802
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> QUIT
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 221 Goodbye
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> disconnected.
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> disconnected.
I am bit of confused. In my case, there is no any error anywhere; however, FTP Adapter in my bpel project doesn't poll file either. It does login to FTP server every one minute; did a list command; then quit.
You may suggest I change the following 2 settings in my bpel project:
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
however, I think they are set correctly, because it match to MDTM command result in my Filezilla server log (see above and below). The modificaiton time format starts at position 4 and ends with position 18 with correct mask
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> MDTM /In/sample2.csv
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 213 *20100916184802*
Can anyone offer me some help? I am desperately want make this work so that I can show this example to others here.
Thanks in advance!
Kevin
Edited by: user3026501 on Sep 16, 2010 1:44 PM
Edited by: user3026501 on Sep 16, 2010 1:47 PM

After I delete following 2 lines, I got some error in domain.log
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
Error in domain.log
<2010-09-29 11:01:56,358> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Managed Connection Created^M
<2010-09-29 11:01:56,358> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection Created^M
<2010-09-29 11:01:56,405> <ERROR> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Error in creating FTPTimeMask^M
<2010-09-29 11:01:56,452> <ERROR> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Could not get file modification time for : test1.csv^M
<2010-09-29 11:01:56,452> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11430
Error in listing files in the remote directory.
Unable to list file in remote directory.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
^M
Here is my latest jca:operation definition:
<jca:operation
FileType="ascii"
PhysicalDirectory="In"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
PhysicalArchiveDirectory="Archive"
UseRemoteArchive="true"
DeleteFile="true"
IncludeFiles=".*\.csv"
PollingFrequency="60"
MinimumAge="120"
OpaqueSchema="false" >
</jca:operation>
Any more suggestion?
Thanks!
Kevin

Error in FTP adapter urgent

Hi,
i used an FTP adpater to write in a folder by selecting Put() operation. i deployed it in console, when i give inputs & test it in console it is throwing following error
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error in establishing connection to FTP Server. Error in establishing connection to FTP Server. Unable to establish connection to server. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
is there any settings need to be done like creating queue or connection factory settings in console , like we do for JMS adapter & DB adapter.
thanks.

Hi,
Assuming that you're using SOA Suite 11g, FTP adapter requires a JNDI to be created on Weblogic Admin Console unlike File adapter. You must have used this JNDI(e.g. eis/Ftp/OracleFTP) while defining your FTP adapter config.
Follow the Technology Adapter Guide. There are various use-cases referred here too.
Regards,
Neeraj Sehgal

Error in FTP adapter

Hello,
We use an FTP adapter in J2EE SP17 and get this error. Can someone explain what is wrong and what could be done about it?
Thanks in advance.
Trying to put the message into the send queue.
2006-09-23 00:50:53 Error Putting message into send queue failed, due to: Message ID 37584930-4a62-11db-cfae-00101810d32e(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPXP1DB.SYS_C00120502) violated.
2006-09-23 00:50:53 Error Returning to application. Exception: Message ID 37584930-4a62-11db-cfae-00101810d32e(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPXP1DB.SYS_C00120502) violated
2006-09-23 00:50:53 Error File INVOICES: Attempt to archive file "/PRDLegacyToSap/Processed/I042/20060922-006055-632_INVOICES (161.197.216.90)" after processing failed with com.sap.aii.adapter.file.ftp.FTPEx: 550 Rename failed.. Retry

Hi,
you try to insert a record, that key already exits on the database.
Try the insert with a different key.
Regards Mario

FTP Adapter error: SLDAccess

Similar Messages

Maybe you are looking for