FTP adapter for OESB in Linux and OESB hosting in Linux

Hello,
is there anyone can explain how to set the correct path for the ftp directory and the local physical directory during setting up the wizard?
FTP server directory will be: \folderA << physical location is in \var\ftp\folderA
Local Archive Directory will be :\var\ftp\folderArchieve
How do I going to configure this in my config xml as well?
Edited by: kpchong on Jan 22, 2010 2:46 AM

Well, Metalink can't find any pages that match that error number, or the error text.
Nor can Google - the only pages that come back are this page and your post on orafaq with the same message.
Have you posted the error message correctly? If you run the procedure from SQL*Plus as if the workflow engine were running it, what happens?
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Similar Messages

FTP adapter for Oracle Service Bus - retrieve file by dynamic file name.

Hi
I am newbie in OSB. I try to use FTP transport in Workshop, it must fill in "Prefix" and "Suffix" for destination file name.
But for us, the file name is sent by external systems.
The workflow is:
1. External system call our proxy services.
2. Proxy service get file name from SOAP message.
3. Proxy Service get the file from FTP server.
4. The file send to Business services.
Any suggestions to implement about workflows?

Let me first put here what I understand about the flow:
External Sytem -->(filename)--> OSB HTTP PS --> (1) --> OSB FTP BS --> Read file based on filename
|--> (2) --> send file ontent to another system or return to the original system
If that is the flow, then I beileve ther is no straight forward way to implement it in OSB.
OSB FTP BS will only write a file to FTP Location.
If you create a JCA FTP Adapter for reading the file, then you can use it only to create a Proxy Service, and that proxy will not pick up the file when called from another service but only when a file is put on the source FTP location.
So, to implement the solution you will need to use Java Callout to a class which has code written to accept the file name as input, read the file from an FTP location and return the file content.
This is my understanding of how it is, may be there is another way to implement this or in fact may be the latest version of OSB 11.1.1.4 or 11.1.1.5 JCA adapter does support read operation within a flow instead of just at the start of the flow.

I have an iPad 2 and want to use video mirroring. I bought a VGA adapter for the iPad, iPhone and iPod so that I could plug the iPad into any monitor, TV, projecter, etc without it being an HD device. I plug it in and it appears the monitor has no communi

I have an iPad 2 that I want to use with video mirroring to give lectures with. I bought a VGA Adapter for the iPad, iPhone, and iPod as I want to be able to connect with any TV, monitor or projector for lectures, not just an HD device.. After plugging in my iPad to the VGA adapter and then to the video device, it appears that there is no connection with the iPad. Anybody have any thoughts?
Thanks, Steve

This article outlines how to use the Apple AV adapter or VGA Adapter to connect your iPhone 4, iPhone 4S, iPad, or iPod touch (4th generation) to an external TV, projector, or display. http://support.apple.com/kb/HT4108
This explains how to set up AirPlay Mirroring, and how to troubleshoot AirPlay Mirroring issues that may occur between your iPhone, iPad and Apple TV (2nd generation). http://support.apple.com/kb/TS4085

Apple 30-pin adapter for my iPhone 4 and iPod doesn't work

I purchased an Apple 30-pin adapter for my iPhone 4 and iPod touch to connect an HDMI cable to my HDTV. I am able to get audio but no picture. Any suggestions as to what the problem may be?

Review this
http://support.apple.com/kb/ht4108

HT4108 ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

I just bought a GSI HDMI Cable Adapter for my IPad2, which is running IOS 8. The adapter is not even recognized by the ipad.

How to configure FTP Adapter for multiple endpoints?

Scenario: I have multiple ftp endpoints (5-15) and depending on some business logic, I have to send data to the right destination. With default ftp adapter configuration, I have to add a n adapter connection factory reachable via JNDI for each destination. But I want to read the different endpoints dynamically from e.g. a database and configure my ftp adapter at runtime. That's because the endpoints do change quite often.
Interconnect had such a feature: FTP Sender: The FTP adapter supports sending to multiple FTP endpoints. This feature provides flexibility for sending messages to different remote FTP servers.
Any ideas on that for SOA Suite?
Thanks,
Torsten

For more documentation please send a mail to [email protected]

FTP adapter should take file path and name at runtime..

Hello All,
I have requirement of getting the file from remote machine into local machine..thinking FTP adapter should help me to do this..
I dont need to poll the remote directory. rather I will pass the exact path and name of the file to be fetched during runtime as an input to the bpel process.
How to configure the FTP Adapter to receive the file path runtiime and gets it to local machine.
Is it doable using ftp adapter..?
Thanks
Saikrishna

Hello Anne,
Thank you for the help.
I am not able to call a adapter partner link using invoke activity..I am facing variable type conflicts.
modified the
OutboundFtpHeaderType wsdl to take file name and directory as:
<complexType>
<sequence>
<element name="*fileName*" type="string"/>
<element name="*directory*" type="string"/>
</sequence>
</complexType>
Using Adapters tab of Invoke activity created a variable:
<variable name="outputVariable"
messageType="client:FTPadapterResponseMessage"/>
<variable name="*filePath*" messageType="ns2:OutboundHeader_msg"/>
Using Assign Activity, assigned the input varibales to the ftp outboundHeader variable:
<assign name="Assign_1">
<copy>
<from variable="inputVariable" part="payload"
query="/client:FTPadapterProcessRequest/client:*directory*"/>
<to variable="*filePath*" part="outboundHeader"
query="/ns2:OutboundFTPHeaderType/ns2:directory"/>
</copy>
<copy>
<from variable="inputVariable" part="payload"
query="/client:FTPadapterProcessRequest/client:*filename*"/>
<to variable="*filePath*" part="outboundHeader"
query="/ns2:OutboundFTPHeaderType/ns2:fileName"/>
</copy>
</assign>
Used the created variable in the invoke activity as a input paramater to the partner link:
<invoke name="Invoke_1" partnerLink="ftpAdapterTest"
portType="ns1:SynchRead_ptt" operation="SynchRead"
inputVariable="*filePath*" bpelx:inputHeaderVariable="filePath"/>
<reply name="replyOutput" partnerLink="client" portType="client:FTPadapter"
operation="process" variable="outputVariable"/>
I am getting an error in invoke activity:
Variable type does not match the input type.
Thanks
Saikrishna

Using Airport Extreme as a wireless adapter for an xbox 360 and/or computer

I have a wifi network that is successfully broadcasting internet, i also have a spare Airport Extreme that i would like to use as a wireless adapter for my xbox 360.
My Existing network is being broadcast from a D-Link modem so it doesn't support "extending a network" with airport extreme
What i want to achieve is:
Wifi Internet being broadcast by d-link, received by Airport Extreme WIRELESSLY, then sent via a WIRE to my xbox 360's ethernet port so that i can access internet on my xbox 360.
Unfortunately:
My Xbox 360 doesn't have built in wireless
Connecting to the d-link network wirelessly (with the airport extreme) doesn't seem to give me a wired internet connection (from the airport extreme)
I don't want to extend the network wirelessly
Any help would be appreciated
Thanks in advance to any users who know how to solve my (probably simple) problem

Welcome to the discussions, DanSwiggsD!
If you have a non-Apple device as your main router, unfortunately the AirPort Extreme has almost no chance of compatibility with your main router.
If you do have an Apple router as your main device, please post back with your model number and we'll let you know how your devices should be configured.
If you don't have an Apple device as your main router you have a few options to connect the xbox:
1) A pair of ethernet powerline adapters could be used if you did not want to run a regular ethernet cable from your main router to the xbox.
2) The new AirPort Express 802.11n model does have a feature called Proxy STA which should allow it to receive a wireless signal from any wireless router and allow the ethernet port to be enabled.
Message was edited by: Bob Timmons

Bluetooth adapter for the ipod hifi and my iphone 5

is there a bluetooth adapter for the ipod hifi that will let me use my iphone 5 via bluetooth?

The lock button on my iPhone5 has also started acting up. Extremely annoying. I have to get it replaced, but I've dropped my phone once and there is a scratch on the top left corner of the phone, so I'm not sure what the warranty says about this situation.

FTP Adapter and DB Adapter

I am having a FTP adapter for receiving the file in D3l format. This is publisher side. On the subscriber side i have a DB adapter. I get the procedure from i studio and installed on subscriber side. But while receiving the message it gives error
ora-06513 coolections unintialised
Can anybody help me?
Thanks,
Mehta.

Please check and recompile the package and the procedure exported from iStudio. As a simple check, you can get just compile the empty package procedures and test a message at run time. Or, if your procedure is not too large , you can try posting it here and we can take a look at it.
Regards,
Shub Lahiri
Product Manager
OracleAS Integration

Inerconnect smtp and ftp adapter

Does anybody know if it is possible (and how) to change the name of the files generated by the smtp and ftp adapter. for exmple I want to give a fail created by the ftp adapter an extension .csv.
How can I arange this??
Thanks,
Edward

Why don't you try using the FileModificationTime as DirListing in the Activation Spec. If the activation spec is configured that way, it parses the timestamp from the Directory Listing.

Common power adapter for Macbook Air and Macbook Pro?

I have both a Macbook Air and a Macbook Pro at home, and it would be really nice to have one magsafe adapter by the couch rather than two...
I have actually tried the Air 45w adapter on my Pro and it works fine as long as the Pro is not fully discharged. If the Pro is unable to start up on battery, it's also unable to start up on the 45w AC. But otherwise it seems fine.
In the reverse direction, normally I use the 85w Pro adapter for both the Pro and the Air. That also works fine; the drawback there is that, since the Air receptacle is mounted at an angle, and the magsafe connector on the Pro adapter is straight-ahead, I have to put the Air on a pillow and even so the connector comes out frequently.
The obvious solution would be an 85W adapter with an Air-style right-angle connector. I find the angled connector is not a problem at all on the Pro.
A few questions therefore:
1) Am I doing any damage, in either direction, using the 45W adapter on Pro or using 85W on Air? My guess is that the adapter and the system are smart enough that it's not a problem. Put another way, I suspect the designers accounted for the possibility that idiots like me would plug one computer's adapter into a different model, and they made sure it was not harmful. But that's speculation on my part. Anyone got any real information?
2) I have done the obvious web search and can't find an 85w with a right-angle magsafe connector. Am I missing something obvious?
3) My next step is to snip both cords and splice an Air connector onto a Pro adapter. I'm not super handy so it will probably be kind of an ugly job. Anyone got any suggestions on the cleanest way to do this?

Hi Ottosmo!
Welcome to Apple Discussions.
1) While it's certainly recommended to use the appropriate wattage on the charger, I too have often found myself using a MacBook Pro (85w) and MacBook (60w) with my MacBook Air. I've yet to encounter an issue in the almost 10 months I've been using my Air. The wattage on the power adapter, to my knowledge, is an indication to the amount of potential power that the charger can deliver to the unit. I know I've read various "blogs and forums" indicating that the power adapter is smart enough to 'scale' back power appropriately.
Now with that being said... should something happen, for whatever the reason, with you using the non-supplied adapter then you'd be taking matters into your own hands. (take that as my own little disclaimer)
2) Correct, the 85w adapter does not come with the right angle adapter. The adapter on the 24" LED Cinema Display does have a right angle adapter that supports up to 85w. But I realize that's not what you asked.
3) Regarding "modifying" the cabling. I'd strongly recommend against it, especially if you don't feel comfortable with splicing and then insulating. Too much room for chance and potential problem/failure. If someone else wants to instruct you on how to do this, that'll be their prerogative.
I ended up purchasing an iLap 13" for using my MacBook Air. It's been fantastic and I have it set off to the side just enough to allow plenty of room for a MacBook or MacBook Pro adapter. Not to mention it allows me to easily use the Air in my lap without any ventilation issues.

FTP Adapter Configuration For End Of File

Hi Team,
i'm doing DB polling and writing that contents to on file using FTP Adapter, DB poller will poll each line @ a time and writes to remote Server
in my FTP adapter usage, after writing the whole contents which i pass from my bpel,
i need to use some hardcoded values at the end of the file
Eg.
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
@@Thanks@@
Like shown above after writing some contents
i need to add @@Thanks@@ then one ENTER
Thanks in advance

Ok, now I'm understanding you are using "Append existing file" option checked... The approach won't work with appending on...
If you know when it is the end of the file you can do something like this...
At the first line file will be like this...
line1|line1
Second line...
line1|line1
line2|line2
When you receive the third line and you know that's the last line you write firstly this...
line1|line1
line2|line2
line3|line3
And then you write the @@Thanks@@ at the end using a different translation schema... Possibly a different FTP Adapter writing on the same file...
line1|line1
line2|line2
line3|line3
@@Thanks@@
However, if you don't know when you are receiving the last line and/or you need the @@Thanks@@ always there it won't work with append option... You'll possibly need a sync read FTP adapter to read the file and rewrite it again at every iteration...
Cheers,
Vlad

HT4381 is there any way to find an adapter for apple tv and Samsung tv with wise link?

Where can I find an adapter for my apple tv and Samsung TV with only a wise link input?

Welcome to the Apple Community.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

Need Help on FTP Adapter Archival Process

Hi Guru's,
I implemented FTP Adapter for Inbound Operation to read the file from inbound directory and after reading the file should be archived in Archival Directory and Delete the file from directory from inbound directory.
In my case file is successfully picked from inbound directory and records inserted in to database table. File is not Archiving in Archival Folder and File deleted from Inbound Directory. Here I need to Archive the files in Archival Folder.
Thanks in Advance
Could you please help me in this regard and Please provide pointers to me

<property name="UseRemoteArchive" value="true"/>
Set this property to "true" to notify the Oracle FTP Adapter that the archival directory is on the same FTP server. If set to "false", the Oracle FTP Adapter uses a local file system folder for archival.
for more Information here to go : http://docs.oracle.com/cd/E15523_01/integration.1111/e10231/adptr_propertys.htm#CHDEDJEA
Regards,
MS Raghava

FTP adapter for OESB in Linux and OESB hosting in Linux

Similar Messages

Maybe you are looking for