FTP adapter settings for SFTP connection

We are trying to connect an FTP adapter to a SFTP server.
After solving the license problem with Maverick/3SP class, the error we get now is:
"The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server."
Have done all steps required, set up the oc4j-ra.xml file, adding the license file to the jar, etc. The settings are as usual (following the instructions in the manual): password authentication, port 22, etc.
Taking a look at the SFTP/OpenSSH server log, we can see that OAS tries to connect, but the last log entry is "fatal: Read from socket failed: Connection reset by peer.". Of course, if we try to connect through the SFTP client from the OAS machine to the SFTP server, we can do it with no problems.
What can we do?

Log a Service Request with Oracle. We are working with Oracle to resolve SFTP related issues as well.
Good luck, Sjoerd

Similar Messages

FTP adapter settings for Anonymous login

Hi All,
Can any one tell how to configure the oc4j-ra.xml under the FTP adapter as i am using FTP adapter which did not have any login credentials(Anonymous login)
Thanks andRegards,
Nagaraju .D

Hi ,
I have an FTP server which dont require any credentials when i using the settings i am leaving blank for username and password then it is throwing runtime error
Thanks and Regards,
Nagaraju .D

How to configure FTP/VAN Adapter for SFTP connection?

Hi,
I am new to the use of Seeburger's FTP/VAN adapter. I read SDN threads where the FTP/VAN adapter can be used for SFTP connections. Could anyone assist me in the steps to configure the communication channels for SFTP connections?
Scenarios:
1. R/3 -> XI -> File (SFTP server)
2. File (SFTP server) -> XI -> IDoc
There is no VAN connection involved. I am just trying to utilize the adapters my PI system currently have for my interface requirement.
Is the configuration as simple as configuring the communication channel or there are scripts involved? If there are scripting involved, is there a benefit to use scripting in the FTP/VAN adapter, rather than XI's own File adapter?
Please assist. Thank you.

Hi Andrew,
Standard PI Adapter will not support to conenct SFTP server, we have to use third party adapters?? do you have any third party adapters??
many compniaes providing SFTP adapters and SAP PI Supports to.
if you dont have third party adapter we do have other alternative , refer below blog
/people/daniel.graversen/blog/2008/12/11/sftp-with-pi-the-openssh-way
Regards,
Raj

Need Help in Creating adapter module for SFTP Sender in NWDS

Hi experts,
I have a scenario where i should write an adapter module for SFTP sender in NWDS.. need your help in achieving this..

Hello,
>>i have followed the procedure of FTP but, adapter is not picking the file
Make sure u have written proper expression to pick file.
>>do we have any different adapter parameters for SFTP... the input file is .csv..
I don't think there are any specific parameters needed for SFTP (but in case u are reading file name in AM then u might have to adjust SFTP namespace)
Thanks
Amit Srivastava

FTP Adapter is unable to connect to server

Hi All,
I am using the FTPAdapter in my BPEL process and trying to connect the FTP server which is running in my VMware linux machine. I am able to connect to the FTP server successfully from my windows machine and I am able to get and put the files. But my log says that it's unable to connect to FTP server. I see the following message in domain.log file
+<FTP Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11438+
Error in establishing connection to FTP Server.
Unable to establish connection to server.
Please ensure hostname and port specified to login to the server is correct.
Please help me to connect the FTP server successfully from my BPEL process.
Thank you.

Linux usually has ftp disabled, try using ssh
if you are on 10.1.3.3 this has been enabled.
I would tend to do all my modification in the Enterprise Manger console, not the xml as you are able to get more meaning around the filed names and what they are used for.
To enable ssh you need to perform the following
change the port to 22
set ssh encryption = true
cheers
James

FTP Adapter configuration for UNIX env

Hi
Can anyone help in setting up an FTP adapter which will just read files from the given location in a UNIX environment. I have done the same in windows environment with FILEZILLA and it works fine. Now i need to implement the same in UNIX environment. So i have the composite ready. All i need is what settings need to be made in UNIX env..??
Edited by: 944160 on Dec 20, 2012 1:21 AM

Resolved

MalformedInputException Error in Adapter module for SFTP channel

Dear All,
I am using MessageTransformBean in adapter module for Plain to XML conversion. The channel works fine in all the cases but when I recieve " ì " or few more special characters in the file my channel does not pick file and show below error.
Error: com.aedaptive.adapter.sftp.SFTPException : Aborting processing: com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
I am using below parameter value in adapter module.
Transform.Class : com.sap.aii.messaging.adapter.Conversion
Transform.ContentType : text/xml;charset=ISO-8859-1
Please help me if any of you have faces such error in your developments.
Avanish

Hi Grzegorg,
I have tried using UTF-8 encoding in my channel but this doesn't work. Communication cahnnel is still giving same problem.
Error: com.aedaptive.adapter.sftp.SFTPException : Aborting processing: com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
The file which we are trying to process have character Ì and as far as my serach is concerned i think this belongs to charset ISO-8859-1.
Any more suggestion Guys to solve this problem.
Thanks and Regards
Avanish

Sender AS2 adapter settings for Asynchronous MDN

Hello,
I need to configure the settings for AS2 sender adapter for Asynchronous MDN.
In order to configure the asynchrounous MDN Settings which parametrs i need to fill in the channel from below
1) Use Proxy
2) Proxy Server
3) Proxy Port
4) Proxy User
5) Proxy Password
6) Proxy Realm
7) Proxy Protocol
8) Server Certificate (Keystore)
9) Private Key for Client Authentication
Thanks
Srinivas

Hi,
The MDN asynchronous mode is for the AS2 receiver adapter and not sender.
If you want to use a proxy server, then only you would need to provide the details that you have mentioned and if you are using encryption, you would need to provide the encryption certificate in the corresponding receiver agreement where the comm channel is used.
Also, for asynchronous MDN, you would need to configure a report channel (AS2 sender adapter with message protocol reports) and sender agreement. You need this even if Refer to XI system option is disabled in the AS2 receiver adapter.
Regards

FTP Adapter Configuration For End Of File

Hi Team,
i'm doing DB polling and writing that contents to on file using FTP Adapter, DB poller will poll each line @ a time and writes to remote Server
in my FTP adapter usage, after writing the whole contents which i pass from my bpel,
i need to use some hardcoded values at the end of the file
Eg.
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
test1|test2|test3|test4
@@Thanks@@
Like shown above after writing some contents
i need to add @@Thanks@@ then one ENTER
Thanks in advance

Ok, now I'm understanding you are using "Append existing file" option checked... The approach won't work with appending on...
If you know when it is the end of the file you can do something like this...
At the first line file will be like this...
line1|line1
Second line...
line1|line1
line2|line2
When you receive the third line and you know that's the last line you write firstly this...
line1|line1
line2|line2
line3|line3
And then you write the @@Thanks@@ at the end using a different translation schema... Possibly a different FTP Adapter writing on the same file...
line1|line1
line2|line2
line3|line3
@@Thanks@@
However, if you don't know when you are receiving the last line and/or you need the @@Thanks@@ always there it won't work with append option... You'll possibly need a sync read FTP adapter to read the file and rewrite it again at every iteration...
Cheers,
Vlad

FTP adpter setting for SFTP

Hi All,
I am trying to connect to an SFTP server on unix and pick up a file. I have done all the connection settings as per the documentation in oc4j-ra.xml and i have also made sure the hostname and port are correct. But when im trying to connect below is what i get
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
<2008-11-06 11:10:56,486> <WARN> <DougDomain.collaxa.cube.activation> <File Adapter::Inbound> The connection variable is null in postCall. This could be because of a call postCall w/o a preceeding call to preCall.
<2008-11-06 11:11:06,962> <WARN> <DougDomain.collaxa.cube.activation> <File Adapter::Inbound> The connection variable is null in postCall. This could be because of a call postCall w/o a preceeding call to preCall.
<2008-11-06 11:11:17,061> <WARN> <DougDomain.collaxa.cube.activation> <File Adapter::Inbound> The connection variable is null in postCall. This could be because of a call postCall w/o a preceeding call to preCall.
Any inputs regarding the postcall and precall would be greatly appreciated. Thanks for your time.

Thanks for you time and effort marc. Yep its perfectly working fine from the command line.
Thanks
Biju

IP settings for PC connected to SPA942

My SPA942 is connected directly to ITSP ( a cable modem) using DHCP. It gets the IP and VoIP part works fine.
However, the PC with DHCP client on connected to the SPA942 PC port does not get an IP and I can not use internet.
Questions:
1. The PC port of SPA942 - does it features a DHCP server so all devices connected to it will get IPs? If yes, what is wrong and why my PC does not get an IP?
2. Or: the PC port of SPA942 is just a bypass and my PC should get IP from the ITSP modem (which has a limit of one IP only and this is why PC is not connected)?
3. Will my PC get on-line with manual IP settings? If yes, what it should be when SPA942 gets this:
IP 24.84.40.148
Sub net: 255.255.252.0
DNS: 64.59.144.90
4. When I set my PC to manual mode with IP 24.84.40.150 and same subnet mask and DNS as SPA942 I can get to the web settings of SPA942 but still can't get to the web. Not completely sure what I am doing here...
Please help and thank you!

Basically what you need is a router for you to use both Phone and PC to work with the internet. The Ports that you are seeing underneath the device is use for VLAN which separates voice and Data. The Phone doesnt have a router functionality so you wont be able to share the internet with your computer.

System Landscape settings for EP connecting to SAP Webdisp to ess/mss

We have external facing portal . for reverse proxy we are using sap webdispatcher.
sapwebdispatcher->ep->sapwebdispatcher--->HCM(ess/mss)
EP connects to HCM(ess/mss) via sap webdispatcher.
What should be my system landscape defination in Portal and JCo destinations for webdynpro where ep and webdynpro is connecting to backend(ess/mss) via sap webdispatcher.
My guess is instead of message server I should point to sap webdispatcher url then what should be my port for connectors,ITS settings and WebAS settings in system landscape.
Thanks very much in advance for your help.

Something like that, with Firewalls and additional web dispatcher for external access to HCM:
FW                   FW
FW sapwebdispatcher1-FW-->ep--->sapwebdispatcher3--->HCM(ess/mss)
FW                   FW            ^
FW                   FW            |
FW sapwebdispatcher2-FW----------->|
FW                   FW
The reason is that EP iview with ITS content requires browser to have direct visibility of ITS backend. You can see it if you trace HTTP requests.
Regarding system definition in PCD:
Michael is correct about Connector part - you can do direct HCM.
The more important issue is what you will put in "ITS Connection" (and SAP Web AS Connection). It is important to put public hotname/URL of sapwebdispatcher2, otherwise external web browser will have issues.
Another thing: no protocol mix for external URLs. If your EP is accessed via HTTPS, you will have to put HTTPS in ITS connector definition. Otherwise users will see browser warnings. You can do SSL termination on web dispatchers if you want and use HTTP from DMZ web dispatchers, but definition of external URLs should be protocol consistent.
Regards,
Slava

JMS adapter settings for response to dynamic queue

Hello,
We are sending a message through JMS to SAP in a synchronous manner (client waiting for the reply after sending the request). The SAP is receiving and processing the message.
We configured the JMS Sender & Receiver channel as per solution given in SDN for the quetion. ( (2.8) Does the JMS Adapter support the JMSReplyTo feature? )
1. In Sender communication channel, checked the "JMS Message ReplyTo Destination" attribute of 'Adapter specific message attributes'
2. In Receiver communication channel, added the "JMS.Message.DynamicDestination" parameter and value 'true' (without quotes for both strings) in "Set JMS Additional Parameters" table
3. Added the "JMSReplyTo" header syntax in input xml message as below:
                    a. Message : <?xml version="1.0" encoding="UTF-8"?>
                             <ns0:getEmployeeInfo xmlns:ns0="namespace">
                             <employeeId>0000001</employeeId>
                             </ns0:getEmployeeInfo>
                    b. Destination = com.someDestination
                    c. JMSReplyTo= com.someReplyQueue
We have selected Transport protocol option "Access JMS Provider Generically"
But it is not able to send the reply to replyTo destination of the message.
Wondering if there is anything in the JMS Adapter setting like reply to Destination (technical term DCJMSReplyTo) which can be set to reply queue of the message (to a dynamic destination).
Please let me know in case anybody knows about the same.
Thanks & Regards,
Jayashri Rade

Refer: http://docs.oracle.com/cd/B14099_19/integrate.1012/b25307/adptr_jms.htm
•The JMS API specifies three types of acknowledgments that can be sent by the JMS publisher:
◦DUPS_OK_ACKNOWLEDGE, for consumers that are not concerned about duplicate messages
◦AUTO_ACKNOWLEDGE, in which the session automatically acknowledges the receipt of a message
◦CLIENT_ACKNOWLEDGE, in which the client acknowledges the message by calling the message's acknowledge method

File Adapter support for sFTP

Hi, Is there a way we can configure File Adapter to use Secured FTP protocol?

Hi,
yes this is possible if your XI is on SP13
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Using FTPS (File Transfer Protocol using SSL/TLS)
Regards,
michal
Message was edited by: Michal Krawczyk

SQL 2008 settings for remote connections

Hi
I am unable to connect to my SAP B1 instance from a client PC. I am using SQL Server 2008 for the first time. The error message on the client PC implies that remote access has not been enabled on the SQL Server 2008. I am not sure how to do this and have so far found nothing from SAP.
Hope someone can help since I need this working for tomorrow!
Ian

SQL 2008 needs new SQL Native Client. Have you install that client on the PC successfully?
Thanks,
Gordon

FTP adapter settings for SFTP connection

Similar Messages

Maybe you are looking for