FTP Protocol support in JDK 1.4.2
It seems like HTTP is the only official supported Protocol. Any idea if FTP is supported by Sun One Web Server 6.1 SP5. If yes is there any special set up, currently it is not working.
Thanks
You answered your own question, when you typed "Sun One Web Server".
In case that's not clear, no, it doesn't support it.
Similar Messages
-
Http and ftp protocol extremely slow (pop working well though)
Hello. Starting today, on one of my macs, http and ftp protocol are extremely slow (page load 90 sec. instead of 2) (pop working well though). Provider finds nothing, on second mac all is fine (same cable, same settings … ). Cable connection, checked both sockets, changed cable, no change. Since pop3 protocol seems to work fine, this does look like a software problem to me. (Repaired permissions, no other tests or means. All used software up to date (OSX10.6.8 etc.))
I'd be thankful for any idea.Not at all. Then I turned on NetBarrier, for testing and to avoid any damage (piece of software I don't employ in vain), and all slowed down again, but not quite as badly as before. Restarted, and now it seems back to normal with all extensions loaded. (I had done that before, obviously, and with no outcome, so it can't very well have been just that. But what?)
I'll watch and learn, and report back; unless you have any further suggestions for the moment. Either way, thankyou very much so far. -
Sender File Adapter (FTP Protocol)
Hi Every Body,
I have a problem in using Sender File Adapter of (FTP Protocol Type)
I have given all required settings to get connected to the FTP Server.
When i give ( Source Directory and Exact File Name ex : MDMERP.xml)
File gets picked up.
But When i give (Source Directory and Exact File Name ex : *.xml)
it gives below exception
Error occurred while connecting to the FTP server "mdmerp6:21": java.net.ConnectException: Connection refused: connect
Strange any guess !! :(((
Regards
SrinivasHi,
If that is connection error then it should have not allowed to pick up when i have given the specifif file name ,
.xml is too not working
my problem all starts if i use other than file name declarartion it throws error
of below kind
Error occurred while connecting to the FTP server "mdxxxp6:21": java.net.ConnectException: Connection refused: connect
Can i use " Advanced Selection of Source File" and make it run\
With regards
Srini -
File Sender Adapter with FTP protocol
Hi,
I implementet a file sender adapter with FTP protocol. There is a problem: the sender processes the files even if they're in use by another application.
I.E. If another application put files (via ftp) in the sender work directory (that is on ftp), the sender processes those files before their transfer is completed.
I don't want that this sender in a communication channel in PI 7.1, imports files in the system when they aren't completed yet.
There are some ways to block sender before it processes incompleted files (in an ftp)?
Thanks
MatteoHi,
File sender adapter provides a check for NFS mode
+Check this
To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
● Msecs to Wait Before Modification Check
Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.+
Other approach can be to apply OS level checks
Regards
Suraj -
Processing Sequence issue of FTP protocol
Hi,we are using the standard SAP MDM data syndication mode which using SAP XI to publish the data to client system.In this sceanrio,we think the data files generated by MDM Syndication Server should be processed according to their time stamp in the file system, starting with the oldest file.I saw the Processing Sequence parameters of transport protocol File System (NFS) in XI file adapter,but not in the FTP protocol.It seems if we want to sure the processing sequence by date,we have to use NFS.
In the Notes 821267,it mentioned "The File Adapter allows you to configure the Processing Sequence of files for the Transport Protocol "File System (NFS)", which also determines the order for EOIO processing. Files can either be processed in ascending alphabetical order (Processing Sequence "By Name") or by their last modification time stamp (Processing Sequence "By Date"), where the oldest file is processed first. For the Transport Protocol "File Transfer Protocol (FTP)" files are always processed in ascending alphabetical order."
My question is if the file name is consisted of the timestamp,such as "data20081116122345.xml" "data20081117122040.xml",will the files be processed by the "timestamp" name ascending in the Transport Protocol FTP? For example "data20081116122345.xml" first, "data20081117122040.xml" second.Thanks.Yes, if the file consist of timestamp then with alphabetical order, it will execute in the sequence you described.
Thanks -
The FTP protocol: How does the AE manage inbound packets?
I've noticed the following with resect to how the AE handles NAT port forwarding for the FTP protocol.
1. Forwarding for FTP service seems to only work if the WAN port is 21, e.g. map 21 -> 21 works, 2121 -> 21, does not work (packets seem to be dropped at the AE). However, such a restriction hold with other services such like ssh or openvpn.
2. When ftp packets are received by the LAN server, they have the IP of the client stripped and arrive at the server with the WAN IP assigned to the AE, as indicated by the logs. Again, other services that we are forwarding to the server arrive with the correct client IP. So this is only an FTP thing.
The AE seems to do some analysis of incoming packets and treat them differently. One question:
Why does the Airport Extreme do this, and apparently only for FTP packets?I found a workaround by changing the port my FTP server listens to from 21 to 2121. I then set the AE to forward port 21 on the WAN side to 2121 on the LAN side. This allows the server to know what IP the client is connecting from.
I'm still curious why the AE strips the client's IP when you forward to port 21 on the LAN side. -
ActiveX support in JDK 1.4
Where are sun.beans.ole.Packager and unregbean utility
in Java 2 SDK, Standard Edition, v 1.4 Beta 3 for Win32?
Who knows Sun's plans about ActiveX support in JDK 1.4 releases?
Thank you,
AlexanderMore info found in bug 4616580. Please vote...
-Trond -
Dynamic Routing Protocol Support in Cisco ASA Multiple Context Mode
Dear Experts,
Wold like to know whether dynamic Routing Protocol Support in Cisco ASA Firewall Multiple Context Mode. If yes then please provide OS version and Hardware Model of Cisco ASA Firewall. Appreciate the quick response. Thanks.Hi,
Check out this document for the information
http://www.cisco.com/en/US/docs/security/asa/roadmap/asa_new_features.html#wp93116
Its lists the following for software level 9.0(1)
Multiple Context Mode Features
Dynamic routing in Security Contexts
EIGRP and OSPFv2 dynamic routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing are not supported.
Seems to me you would need some 9.x version to support the above mentioned Dynamic Routing Protocols.
I don't think its related to the hardware model of the ASA other than that it requires a model that supports Multiple Context Mode. To my understanding the only model that doesnt support that is ASA5505 of the whole ASA5500 and ASA5500-X series.
Hope this helps
- Jouni -
Does Interconnect FTP Adapter support SFTP/SSH?
Does Interconnect FTP Adapter support SFTP/SSH?
Thanks!
-mbNo it doesn't!
Actually, FTP adapter in BPEL support secure FTP (FTPS, FTP over SSL), but only on Solaris platform if believe documentation.
You can try to connect BPEL FTP adapter to InterConnect using new JCA adapter (in IC 10.1.2.0.2), but I'm not sure wether BPEL FTP adapter is JCA-compatable or not (since it is not in Oracle AS adapters package but inside BPEL)... -
Does the Built-in Windows FTP Client Support a Secure Connection?
I have set up Server 2008 IIS w/ FTP. I set the SSL setting to require a secure connection. However, I can't connect to the FTP server from the built-in Windows FTP client. I CAN get it to work in FileZilla after modifying my connection properties.
Does the built-in Windows FTP client support secure connections? I received a request to set this up so our internal employees can share files with external customers. Many times our customers are unable to install any kind of third party software on their
computers.
Thanks in advance for the help.Hi,
Based on my known, the built-in FTP client does not support secure connections.
Similar thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9500d7c2-cf18-4ab1-a0cb-1e277deab33c/is-it-possible-to-connect-to-iis-75-sslrequired-ftp-site-via-windows-explorer-or-ie-?forum=winserverNIS
If it does not help, you could ask in IIS forums as Meinolf Weber mentioned.
Hope this helps.
Regards.
Vivian Wang -
Diff between HTTP and FTP protocols
Hi
could u plz tell the diff between Http & FTP protocols
With Regards
venkat.Google for "HTTP vs FTP".
You will get plenty of articalls -
Does Ethernet/IP Industrial Protocol support RSLogix5000?
The ethernetip.zip protocol looks like just what I need for communicating between Fieldpoint and my PLC... Does the protocol support the RSLogix5000?
You might want to just post a comment in the NI Labs asking the same thing, as the author of the software will get a notification that someone has posted a comment, and they may know the answer for you. Unfortunately, I am not familiar with that particular software.
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video -
Protocols Supported in OATS 9.2 for Load testing
Hi,
Can any one help us in providing list of protocols supported by OATS 9.2 for load testing applications.
Thanks in advance.
Regards,
MaheshHi Mahesh
OATS 9.20 have the following modules for load testing:
- HTTP/S
- Siebel
- EBS/Forms
- ADF
- Flex
- Oracle Database
Regards
Alex -
Protocols supported by Weblogic
Hi,
How can i connect to weblogic other than t3 protocol?
Does weblogic supports any other J2EE standard protocols??
I am using rmi protocol in my code to connect to weblogic. It is failing.
If any body knows what are all the J2EE standard protocols supported by Web Logic, Let me know
thanks
SureshSir,
<suresh kumar> wrote in message news:[email protected]..
How can i connect to weblogic other than t3 protocol?
Does weblogic supports any other J2EE standard protocols??
I am using rmi protocol in my code to connect to weblogic. It is failing.It is not very likely that it is failing because of t3. It happens to be a pretty
stable thing. May be it is the way you are cooking it.
Do you have any stack traces or error messages that you could kindly share
with us?
Regards,
Slava Imeshev -
Since I have update to Lion I have my print not scanning,. My classic FTP not supported anymore!!!! what is goin on with this update??????
Recover the backup you made before you installed. If you didn't backup, make a backup down, and selectively recover pieces of the backup that will work with the older operating system after erase and reinstalling 10.6. See my backup FAQ*:
http://www.macmaps.com/backup.html
Before you do, you may find your scanner preferences in your printer just need to be set in the Print & Scan preferences in Apple menu -> System Preferences, or some open source scanner and printer drivers can work better*: http://www.macmaps.com/printersx.html
http://www.macmaps.com/macosxnative.html#SCANNER
And in the future ALWAYS backup your data before you install anything. That way you can recover where you went before. Don't cross post in the forum if you can avoid it. Remember this is a user to user forum, so responses may take awhile if you didn't post in an area that really is related to your question. Issues with Lion are best handled in the Lion forum. But as long as I have a chance, I'll respond to this thread.
Maybe you are looking for
-
Do I need to re-install all of my Boot Camp software?
I recently installed a new internal hard drive to my MacBook. This is my old configuration: 13 inch Aluminum Late 2008 MacBook Processor 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3, Software Mac OS X Lion 10.7.4 (11E53). 160 GB SATA disk as m
-
Adding a new field in QM02 table control
Hi Gurus, I have the requirement to add a new field in a table control in QM02.I have added the field in the view VIQMMA but I dont know how it can be added in screen. Is it possible through some SPRO customization? Regards, Rajat
-
Control button inside movieclip with AS
If I got a mc with a button inside, how do write the script to control that button from the main timeline? My script (that doesn't work) looks like this: mymovieclip.mybutton.onRelease = function() { gotoAndStop(2);
-
Problem with the adobe flash player, its falling down, what to do?
Its always falling down almost immediately when i hear music. I have tried to update Adobe Flash player and so on. But it still not working, its strange but i have been thinking if Mozilla doesn't ''allow'' the adobe flash player. Do I need maybe cha
-
I am getting error code 150:30 when trying to open "edit" in PSE 8??
I am getting error code 150:30 when trying to open "edit" in PSE 8??