FTP Server Authentication SLOW

I have an OS-10.5.1 Server that I am presently using for nothing other than an FTP server. (users are set up with OD passwords in LDAPv3 local.) Updates have been held back to 10.5.1. Only services running are AFP, FTP, OD and SMB.
Authentication is very slow, about 15-20 seconds.
I've done some research on this and tend to think it is attempting RFC 931 authentication. I would like to turn this off but only find ways to turn this off for xinetd or xftpd. These were on earlier servers but the Leopard server uses ftpd.
I don't see /etc/ftpd.conf file so I'm wondering where and how I should change this setting. If someone thinks my problem is elsewhere, I would welcome those comments too.
Any help would be greatly appreciated.

sudo vi /System/Library/LaunchDaemons/xftpd.plist
and change params tag from -a to -aI

Similar Messages

Speed up load to ftp server in window server 2008 slow

Dear all.
I have configure FTP in window server 2008 (IIS 7.5...), when I test in LAN speed upload to ftp server is slow ( 60-80 KB/S).
Please help me fix it.
Thanks so much

you should post on IIS forum:
http://forums.iis.net/t/1187778.aspx?Maximum+file+size+for+FTP
http://forums.iis.net/p/1193472/2036340.aspx?Restrict+FTP+upload+file+sizes
try disabling firewall on the ftp server just check if it will help.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Authenticating the FTP server

Hi,
Can u please send me how to authenticate the FTP server using username/password in Oracle 10g? I need to open the file and write contents after authenticating the FTP server.

Billy is right (again). What FTP server are you on about? If it's the embedded one inside the XDB DB, then amazingly enough you authenticate to it like any other FTP server, ie you provide a username and password from any FTP client. You can't tell it's any different from any other FTP server....
If on the other hand you need a PL/SQL FTP client to do FTP from PL/SQL, check out XUTL_FTP.

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

What version of Muse are you using? If it's not 2014.2, please go to the Creative Cloud Desktop App or creative.adobe.com and update.
The FTP login failure is most likely due to your host not supporting FTP Extended Passive Mode. In Muse 2014.2 switch to "Passive (PASV)" in the Connect to FTP Server dialog.
Regarding performance, how large is your site (in pages and megabytes)? How many Design view tabs are open? What specific operations are slow?
If you'd like to send your .muse file, I'll take a look and attempt to isolate the cause of slow performance. Please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. Thanks.

Slow transfer of files from ftp server to client system

Recently when i connect to my ftp server, copying files is very slow, using either Ethernet or Airport, this wasn't the case before. At first i thought it was my network cable but using it with another Mac, files are copied fast. I don't want to format my computer, any ideas why i'm having this slow connection?

Hi Steve!
Your problem sounds like a duplex issue with your Ethernet connection or you have more than just one network switch/hub between you and the server and they aren't configured very well.
Many network admins force their network switches to 100MB/full because Intel machines don't sometimes negotiate their speeds very well. However, Macs typically hate to be forced and prefer "auto" configuration.
Verify that you have one network switch between you and the server and if so, verify that your Mac's network port is set to auto-negotiate your speed and duplex.
You can type "ifconfig" into a Terminal window on your Mac to determine its current speed and duplex. Look for a line that says something like "media: autoselect status: active". For a wired Ethernet port you'll also see the speed and duplex of your connection.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.5)

I'm new to Solaris 10 and need help to setup ftp server

hello!
I just installed Solaris 10 and I'm trying to setup an ftp server (with ftpd) but I don't know how to do that
my server doesn't need any security or authentication
I'm looking for the default shared files directory
Also wondering what to change in what configuration file...
This OS looks quite similar to some linux I used before but the differencies are big enough to drive me crazy
anyway thanks for your help.
Any advice is welcome :-)

cd /etc/ftpd
vi ftpusers
put a # in front of root and any other users that you wish to be able to ftp
then svcadm restart ftp
If you want to set up an anonymous ftp server, there is a little more involvement

Can not connect to Cerberus FTP Server with PASV

I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
Response:          220-220-Welcome to Cerberus FTP Server
Response:          220 220 Created by Cerberus, LLC
Command:          USER test
Response:          331 User test, password please
Command:          PASS ***********
Response:          230 Password Ok, User logged in
Command:          CLNT FileZilla
Response:          200 Command okay
Command:          OPTS UTF8 ON
Response:          220 UTF8 support on
Command:          PBSZ 0
Response:          200 PBSZ=0
Command:          PROT P
Response:          200 PROT P OK, data channel will be secured
Status:          Connected
Status:          Retrieving directory listing...
Command:          PWD
Response:          257 "/" is the current directory
Command:          TYPE I
Response:          200 Type Binary
Command:          PASV
Response:          227 Entering Passive Mode (external IP,195,83)
Command:          MLSD
Error:          Connection timed out
Error:          Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.

Dan,
Looking at the output,
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike

Unable to poll for files in FTP server using Proxy Service (in OSB Project)

Here are the stepd followed for creating proxy service that should poll ftp server to retrieve files but polling is not happening and unable to see any errors in logs.
1. Created service account by selecting resource type as static and providing the ftp user and password details.
2. Created a New Proxy Service in eclipse
     Tab General - service type as Messaging Service
     Tab Messaging - Request Message Type as Text, Response message type as None
     Tab Transport - Protocol selected as "ftp"
          - Endpoint uri entered in the format - ftp://hostname:port/directory
FTP Transport -Selected "external user" as User Authentication
          - Selected the Service Account thats created in step1/
               - File mMask - *.*
               - Polling Interval 60
               - Read Limit 10
               - Post Read Action - Delete
               - Transfer mode - binary
               - Download Directory - "some local directoy"
               - Error Directory - "some local error directory"
Could any one please help here to trouble shoot the polling issue and correct me if this is wrong approach.
Thanks

Did you configure the FTP adapter which is present in Weblogic server?I think he's using FTP transport in OSB and not the JCA adapter, if that's the case FtpAdapter configuration wouldn't help...
unable to see any errors in logsThat's odd, try to mess up the hostname and see if you get a connection refused on the logs...
It may be a permissions issue, the user you're connecting may not even "see" the files you place there... Try using the same user to create and to poll files...
Cheers,
Vlad

User named "Connected" logged on to my FTP server

I was checking out the activity on my server and found that I had a user with the name "Connected" logged into my FTP server as an authenticated user from address 218.188.21.181. I checked the system log and all I can find for entries on this IP address are repeated login failures.
My question is why does it show an active "Authenticated" connection from that IP address in Server Admin with a bogus name of "Connected", when the system log only shows entries from that IP address as repeated login failures? How can I tell if this person logged in successfully since successful logins are not logged?

This is all that I can find in the system log for that IP address. From what I can tell (system.log does not show successful FTP connections from what I can see), he has not connected. If he has, he has not done anything over FTP. I have every option selected for FTP logging, so any directory change, or file transfer would be logged. Anonymous access is disabled and I have gone over every share to make sure that none of them have guest access enabled. What bothers me is when looking at the FTP service in Server Admin, under the connections tab, it shows the following connection:
Name: connected
Type: Authenticated
Address: 218.188.21.181
Activity: IDLE
Other (known) users are listed as well, and when I look at the activity log, I can see that they are uploading/dowloading files from the server as expected. I just want to know why I have this user named "connected" that appears to be connected to the server.
System.log:
Jan 22 18:09:46 minime ftpd[132]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:19:52 minime ftpd[689]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:30:05 minime ftpd[1138]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:40:29 minime ftpd[1652]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 18:51:01 minime ftpd[1853]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:01:43 minime ftpd[2001]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:12:34 minime ftpd[2269]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:23:33 minime ftpd[2452]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:34:41 minime ftpd[2610]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:45:58 minime ftpd[2792]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 19:57:24 minime ftpd[2967]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:08:59 minime ftpd[3129]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:20:43 minime ftpd[3446]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:32:36 minime ftpd[3570]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:44:38 minime ftpd[3675]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 20:56:49 minime ftpd[3769]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:09:09 minime ftpd[3868]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:21:42 minime ftpd[4085]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:34:20 minime ftpd[4164]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 21:47:07 minime ftpd[4264]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 22:00:04 minime ftpd[4383]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 22:13:10 minime ftpd[4573]: repeated login failures from 218.188.21.181 [218.188.21.181]
Jan 22 22:26:24 minime ftpd[4731]: repeated login failures from 218.188.21.181 [218.188.21.181]

Reg : How can I get Username and Password in FTP Server in HANA

Hi All,
Any one can you please guide me....How can i get username and Password of FTP Server in SAP HANA?
Regards,
Arjun

Hi Arjun,
Are you looking for external authentication(External ID option) in HANA Studio instead of logging by entering HANA User and Pwd(which is internal)?
You can look for the following Security guide which will give you some insight on this.
http://help.sap.com/hana/hana1_sec_en.pdf
Rgds,
Murali

FTP server: PORT command not supported??

Hi,
In a nutshell - we are trying to set up PASV -- PORT connection between a Tiger server (10.4.11) and another system (say it's a windows FTP server). Issuing a PORT command to a Tiger FTP server fails with this error:
-> PORT 192,168,11,3,199,158
<- 500 Invalid PORT command
I have done some research on the web and as far as I can see - this is just a feature that is disabled in Mac OS X ftp server.
What's strange is that "features" command states that PORT is supported.
Has anyone seen PORT command work for a Tiger Server ftp daemon?
Has anyone succeeded enabling this command on a Tiger server?
Can you recommend another FTP server that works well on a Tiger server?
Thanks a million,
Darius

Passive (PASV) and Port (PORT) mechanisms are orthagonal.
If you're working with PORT, then you're almost certainly trying to clear through one or more firewalls. And a firewall can also trigger the Illegal Port Command error for a PORT command.
(Though I don't see a PORT command in the Mac OS X ftp client. I've checked a couple of clients, and it isn't common to expose it.)
ftp is a mess. Insecure, difficult to configure, insecure, firewall unfriendly, insecure, and slow. And did I mention insecure?
(No, I'm not a big fan of ftp.)
Some reading material:
http://www.cert.org/techtips/ftp_portattacks.html
http://www.slacksite.com/other/ftp.html
http://cr.yp.to/ftp/security.html
As for a suggestion, chuck ftp and switch to sftp.

Off-Topic: Unresponsive FTP server

What's the deal with Oracle's FTP Server? Everything used to be smooth, no matter what day or time. Now you get:
* User ftp access denied. Not logged in.
* If you ever do log in, and start GET, the transfer rate gets slower and slower 'til you get no response from the server, so you'll have to cancel and try logging in again and you go back to 'user ftp access denied'.
Is it just me, or is anyone else experiencing this? I am downloading the last 40mb of 8iR2 for the last 4 nights.

i agree. i have been trying for days to download something from them, and have yet to be successful.
null

Configure ASA 5515 to allow FTP server behind it.

                   We have one Cisco ASA5515 firewall, I configured ftp mode to passive, inspect ftp in service, use anoother public to do NAT with ftp server, and also configued ACL in outside interface, but I failed to access the ftp server from internet use that public ip address, no problem to acces the ftp server use its inside address in LAN.
Anyone can help on this is appreciated!

Thanks!
I did packet tracer in asdm, all is green.
here is configuration file:
ciscoasa# sh run
: Saved
ASA Version 9.1(1)
hostname ciscoasa
enable password qZTcCWWJxxdsdsxcxcxxr encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd qZTcxxcxcxcxxdcxJglvMyNxr encrypted
names
ip local pool VPNAddressPool 10.115.135.100-10.115.135.254 mask 255.255.255.0
interface GigabitEthernet0/0
description Outside Internet
nameif Outside
security-level 0
ip address xxx.xx.xxx.xxx 255.255.255.248
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
description MPLS Circuit
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
description Inside LAN
nameif LAN
security-level 100
ip address 172.28.144.11 255.255.255.0
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa911-smp-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Outside
dns server-group DefaultDNS
name-server xxx.xxx.xx.xxx
name-server xxx.xxx.xx.xxx
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network VPNNetwork
subnet 10.115.135.0 255.255.255.0
object network 172.28.144.11
host 172.28.144.11
object network NETWORK_OBJ_10.115.135.0_24
subnet 10.115.135.0 255.255.255.0
object network NETWORK_OBJ_172.28.144.0_24
subnet 172.28.144.0 255.255.255.0
object network NETWORK_OBJ_10.100.1.0_30
subnet 10.100.1.0 255.255.255.252
object network NETWORK_OBJ_172.28.76.0_24
subnet 172.28.76.0 255.255.255.0
object network FTP_Outside
host xxx.xx.xxx.xxx
object network FTP_Inside
host 172.28.144.6
object network NAT_FTP
host xxx.xx.xxx.xxx
description FTP
object network FTP-Data
host xxx.xx.xxx.xxx
description FTP-Data
access-list NMA_VPNSplitTunnelAcl extended permit ip object VPNNetwork 172.28.144.0 255.255.255.0
access-list NMA_VPNSplitTunnelAcl extended permit ip 172.28.144.0 255.255.255.0 object VPNNetwork
access-list Outside_access_in extended permit tcp any any eq ssh
access-list Outside_access_in extended permit ip any object NETWORK_OBJ_172.28.144.0_24
access-list NMA_splitTunnelAcl standard permit 172.28.144.0 255.255.255.0
access-list LAN_access_in extended permit ip any any
access-list acl_out extended permit tcp any host xxx.xx.xxx.xxx eq ftp
access-list acl_out extended permit tcp any host xxx.xx.xxx.xxx eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu LAN 1500
mtu MPLS 1500
mtu Outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-712.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (Outside,LAN) source static VPNNetwork VPNNetwork destination static NETWORK_OBJ_172.28.144.0_24
NETWORK_OBJ_172.28.144.0_24 no-proxy-arp route-lookup
nat (LAN,Outside) source dynamic any interface
object network NAT_FTP
nat (Outside,LAN) static FTP_Inside service tcp ftp ftp
object network FTP-Data
nat (Outside,LAN) static FTP_Inside service tcp ftp-data ftp-data
access-group LAN_access_in in interface LAN
access-group acl_out in interface Outside
route Outside 0.0.0.0 0.0.0.0 xxx.xx.xxx.xxx 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.28.144.0 255.255.255.0 LAN
http 172.28.144.6 255.255.255.255 LAN
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
crypto ikev1 enable Outside
crypto ikev1 policy 1
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.0.0 LAN
telnet 172.28.144.0 255.255.255.0 LAN
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption 3des-sha1 des-sha1
group-policy NMA internal
group-policy NMA attributes
dns-server value 172.28.144.2 172.28.76.8
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value NMA_VPNSplitTunnelAcl
default-domain value test1.test2.com
vpn-group-policy NMA
service-type remote-access
tunnel-group NMA type remote-access
tunnel-group NMA general-attributes
address-pool VPNAddressPool
authorization-server-group LOCAL
default-group-policy NMA
tunnel-group NMA ipsec-attributes
ikev1 pre-shared-key xxxxcxxxx
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
policy-map global_poliy
class inspection_default
inspect icmp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:e603c4e7da420d445507ceb5bac213f9
: end

Basically, I failed to login to an ftp server by typing the password wrong. Now I cannot connect to the website at all. What can I do to fix this?

Pretty much what the question says, I managed to type the password wrong when trying to connect to an ftp server and now I cannot connect to the whole website.

Try to clear the Active Logins (Authenticated Sessions) via Tools > [[Clear Recent History]]

FTP server Error 530

Hi,
I am trying to setup FTP server on Windows XP Professional. I am doing the following steps:
--> Enable IIS and FTP services in Add/Remove Windows Components section.
-->In Administrative Tools , setup up FTP site. Anonymous authentication is selected.
--> Enable FTP service in Windows Firewall.
--> Share the folder mentioned in FTP site Directory.
Still when I try to contact FTP server from other windows machine , I get a prompt to enter username and password. I enter the same credentials as mentioned in FTP site properties Security Accounts tab.
I always get the same error:
530 User cannot login.
When I see the current sessions on FTP server , I see the other machine connected. But I can't copy any file .
I get the same issue on Windows 7 too.
Please help!
Regards
Aditi

I would recommend asking them here: http://forums.iis.net/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

FTP Server Authentication SLOW

Similar Messages

Maybe you are looking for