Full export of the CMS from Production to Development

Hello All,
We have to export the reports and universes from Production to Development. In short we need to sync the Development CMS repository with Production CMS repository.
What is the best way to do this. Is Import Wizard the only way to export the contents to Development?
Because when I exported one report from Dev to Prod , we had to go and reset the scheduling properties again in Production. It did not maintain the properties which it was set to before. Is there a way to maintain the scheduling properties the way it was set to before. Or every time when we export a modified report to Production, we need to go and set properties back?
We are using BO 3.1 version.
Thanks,
Naveen

Hi NR,
You will see both Development & Productions services when you go to the "Servers" in CMC once the development is up.
For example,
dev.pageserver
dev.reportjobserver
dev.cacheserver
prod.pageserver
prod.reportjobserver
prod.cacheserver
this happens b'cos of using the production schema for development. It will have a copy of the production services, so you need to delete the services once the CMC is up and running.

Similar Messages

Exporting data from Production to Development in a R/3 System

Good Morning,
I have a landscape where i have a Productive and a Development system (SAP R/3 Enterprise Release 4.70 SR1 1.10 with MaxDB 7.5 running on a HP-UX 11.23) and i was asked to copy the data and customizing (not user master data) from Production to Development. Both systems have 7 clients (6 for each country and one for Human Resources) and i need to copy the productive data to the development data (the Productive data can overwrite the Development data).
This is my first time doing this, and since i have a short deadline to do it, i need all the help i can get...
I'm not sure if i should use SCC8 or SCC9 in order to create a transport request for each client copy.
I've checked the OS space in sapdata and transport directories, i've also checked the database space and i need to change MAXDATAVOLUMES size and also create more volumes.
Now that i've done that, i need to know what to do next... Does anyone knows where i can find a procedure or documentation on this? Some kind of step by step guide?
About the Export Profiles, which default profile should i choose in order to copy
All client specific data, customizing AND NOT user master data?
Can i do any kind of test run before the export in order to understand the space i'm going to need in transport directory for example?
Thanks in advance.
Best Regards,
Pedro Gaspar

Hello Pedro,
1. In SCC8 the SAP_APPL profile isn't available, so i guess i need to use SAP_ALL and change the user master data accordingly afterwards right?
In that case, you should/can 'Export' the user master of the target system before the Client copy, so that you can re-import the same user master in the target system after sap_all copy from source.
2. I also have several project teams developing in ABAP in my development system. If i export the productive client, will the ABAP code be overwritten (scripts, smartforms, etc...)? I ask this, because right now there are several programs with different versions in both systems (the landscape consists of only a DEV and PRD system NO quality). If the ABAP code in development will be overwritten, i need to tell the development teams to comment all the changes, then create transports to production to make the program versions the same, and then save the data an cofiles to import them again in development after the import. Will also RFC definitions change? Jobs will also be copied? What's the difference between this and a Homogeneous System Copy using backup/restore?
This is the reason that normally the 'Production to Development' copy is not recommended. I would wait if our other techies here can help/advise us for this.
A simple difference between a client copy and system copy is that the client copy is just 'client dependent' change and system copy is 'system wide' change - erasing everything on the target and just overwriting/duplicating the 'complete source' onto the target.
Thanks

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem. I think someone of you must help me to

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
SN:F2*****FDR
<Edited by Host>

See the response in your other thread:
https://discussions.apple.com/message/24641427#24641427

HT4993 My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem. I think someone of you must help

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
<Edited by Host>

xinyi93 wrote:
My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
Yes, the iPhone 5S is a global phone. However, Sprint will only unlock phones for use on GSM networks outside of the U.S. In the U.S., that phone can only be used on Sprint's network.

HT4623 Dear AppleCare, My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone. But when I am back in China using local carrier, Can not be activated

>
>>Dear AppleCare，
>>My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone.
>>But when I am back in China using local carrier, Can not be activated
>>I can't believe that !
>>>Details:
>>>SN:F1*******8GL
<Personal Information Edited by Host>

Sorry to tell you this but this is not AppleCare.
This is a forum of users just like yourself who do their best to help other users.
We are not able to help you with your problem

Is it possible to release the request from production to quality

is it possible to release the request from production to quality

It's not allowed..
You can move request from original server ( where a request is created ) to target server.
Since in production server you are not allowed development work.. so u can not create req there... and u can not move req of dev server ( which were moved to prod ) from prod to quality.
Reward if helpful
Regards
Pradeep

HT201210 My itouch screen froze showing "plug to itunes" after trying to update to iOS6. Is there any ways to export all the pictures from it before restoring?

My itouch screen froze showing "plug to itunes" after trying to update to iOS6. It still can be turned on and off. But the screen froze showing that message. I perhaps need to restore it. But is there any ways to export all the pictures from it before restoring?

Only if y can get the iPod out of recovery mode with the program. Otherwise you will have to restore via iTunes which erases the iPod.
RecBoot: Easy Way to Put iPhone into Recovery Mode

Move the FG from Production to Warehouse and QC at WH

Dear All,
We have a senario as follows:
Finish Goods has to move directly from Production to Warehouse and perform QC at Warehouse.
Let us know which Inspection type has to be activated
Please suggest
Regards

Don,
When you say Order --> Warehouse/BIN. I am assuming the put away will happen only when the GR from Production Order is done. IF that's the case then what Vivek suggested you should work. If thats not the case then I am assuming Warehouse has to be maintained as work center and then you need to have an inprocess inspection (Inspection Type 03) active for that work center in your routing. Do let us know if there is some other way you are looking to map this.
Arvind

I am reformatting and rebuilding my Win 7 computer. How do I export all the settings from iTunes so I can import them into my new install?

I need to rebuild my computer which has iTunes synced with my iPhone and iPad. How do I export all the settings from iTunes so I can import them into the new install and not have to go through all the setup again? My music library is my own and on a NAS drive so not going to lose it. I am mainly concerned about setup parameters. Thank you for any assistance.

There's nothing to export.
The iTunesLibrary.itl file contains all the settings, playlists, and playcounts.
Copy or backup all your important files including the ENTIRE iTunes folder, then restore all your data including the ENTIRE iTunes folder once the system is formatted and rebuilt/reloaded.

Moving the CMS from Lync 2010 to Lync 2013

Now that all our users have been migrated to Lync 2013, I need to move the CMS from 2010 to 2013. Using the following MS article:
http://technet.microsoft.com/en-us/library/jj688013.aspx
Nothing is mentioned about the mirrored database. What about that? I found the article below on creating a mirrored database
http://technet.microsoft.com/en-us/library/jj204986.aspx
But at what point do you do this? Should this be done at the same time you run the install-csdatabase to move the CMS or do you wait until everything is complete including the removal of the old 2010 database and then create the mirrored database?

Hi,
Agree with Georg, you can even add a SQL mirror to an existing Lync server 2013 Back End.
You can refer to the link below:
http://howdouc.blogspot.in/2012/08/adding-sql-mirror-to-existing-lync.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Transport of portal pages from Production to Development

Hi,
I need to transfer the portal pages from from the production server to development server. I did see references from Development to Production but not vice- versa.
Can anybody please help me with this? What are the best practices?
DEP :- SP19 and PEP - SP9.
Thanks much,
Dharmi

Hi,
The best practises are :
1) All the Portal Servers in the System Landscape should have the same version, same support package and patches.
2) You should never transport from Production to Development, it's always the other way round.
Why do you want to transport something from Production to Development ? We always develop somthing, test it and then trasnport it to production. Any modifications to be done, should be first done on the Development Server, tested and then transported to the Production. I don't see a need to transport content from Production to Development.
Anyways, if you want to do so can you always create a transport package on Portal Production Server, add those pages to the transport package, export the transport package. You may save this transport package on the local system or you may copy this from the export folder of the server to the import folder of Portal Production Server. Then on the Portal Developement Server import the file. If you have saved the transport package file on your local machine, then while importing select client, browse and then import the file from your local machine or else select server -> browse -> import folder -> select the transport package file and import.
Hope this helps.
Cheers,
Sunil
PS: Reward points for helpful answers.

BEx Query to be transported from Production to Development

Hi All,
We have got an unusual scenario in which we have to import/transport few Bex queries from Production to Development environment. I understand this is not a best practice, but any one suggest the way to implement the same.
Thanks,
Jay

Hi Jay,
For every transport which moves a transport route is configured in transaction STMS (Transport Management System). Ideally it is Dev --> Qal --> Prod. Usually we do not have access to this transaction as Basis Team Configures this route. Check once in transaction STMS (if you have access) that whether the route Prod --> Dev is configured or not (i doubt it would be).
In that case you can raise a request to Basis to configure this route for this exceptional case, if they agree then Transports can be moved via this new configured route.
Regards
Raj

Export of the book from Lightroom to blurb, issue with Backgrounds ' opacitty = overexposed

Hello,
I have Mac book Pro last generation.
While preparing the book with Lightroom, I used new proposed tool that I found very useful , to place photos as background with different type of opacity. After upload to Blurb some of these backgrounds have disappeared at all and some have very bright color (overexposed) , so I am afraid to launch the print . After export into Pdf, everything works correctly.
Please find enclosed two obvious examples, two print screens of pfd file and 2 prinscreent from the ecvivalent of the book Hylem & Mourad wedding at elyseephoto blurb page page 28, 42, 43(i add print screen also).
Please help me to solve the issue, maybe there are some installation to correct for the graphic backgrounds? Are there minimum opacity level?
Thank you in advance for your quick answer.
Kind regards,
Anna Akoun

In the top right hand corner of the Book Module under <Book > change from <PDF> to Blurb.
With Blurb selected you will get lo-res warnings when the resolution is too low. Later on you can change back to <PDF>.
See screen shot:
You would not get a lo-res warning if you used original images from your camera. But if you either use small JPGs, or you crop an image severely and then use it for a full page image, the image will be too small to be used.

Export/Copy .rpt files from Production environment

I'm new to Crystal Reports. I'm using Crystal Reports 10. I urgently need your help with the following:
We inherited 140 reports from another department. The version control was not done well in that department. Now we canu2019t trust the versions on Visual Source Safe.
We decide to pull, or export, the .rpt files from Production environment and put them in VSS.
I understand that I can go to the CE Management Console, open each report, preview and save them in .rpt format. But I have to change the name later from a default name and save the .rpt without data. We have 140 reports. It would be very time consuming, and big risk of mistakes.
The way we publish a report is: open the u2018Balance.rptu2019 from a local project folder, save as, click Enterprise button, and sign on the CE. From there I can see folders on Console to save the report.
My question is: Where I can find these .rpt files in Production environment? How can I save/export all the reports together to my folder u2013 not one by one? If there is a tool to do it?
For the example above, anybody knows where this u2018Balance.rptu2019 is saved? Once the report is published, the name seems changed in file strorage.
Thank you very much for your help.
Linda

Post your question to the Business Objects Forum

What is the best way to mimic the data from production to other server?

Hi,
here we user streams and advanced replication to send the data for 90% of tables from production to another production database server. if one goes down can use another one. is there any other best option rather using the streams and replication? we are having lot of problems with streams these days they keep break and get calls.
I heard about data guard but dont know what is use of it? please advice the best way to replicate the data.
Thanks a lot.....

RAC, Data Guard. The first one is active-active, that is, you have two or more nodes accessing the same database on shared storage and you get both HA and load balancing. The second is active-passive (unless you're on 11.2 with Active Standby or Snapshot Standby), that is one database is primary and the other is standby, which you normally cannot query or modify, but to which you can quickly switch in case primary fails. There's also Logical Standby - it's based on Streams and generally looks like what you seem to be using now (sort of.) But it definitely has issues. You can also take a look at GoldenGate or SharePlex.

Full export of the CMS from Production to Development

Similar Messages

Maybe you are looking for