FullText Searching using a search term from a field

Say I want to compare two tables using FullText searching, one table has the content to be searched, and the other table has a list of search terms (to be evaluated separately). I have not found a way other than using cursors to cycle through the search
terms to capture the results. The FullText search term appears to only allow 'text strings' or @variables, but not [Field]'s. Is there a better way to approach this for batch processing?
Another usage that I see merit for FullText searching is duplicates detection within existing data sets. Is there a way to perform INNER table joins using FullText - or do we have to fall back on CURSOR iterative methods again?
Thanks,
Jay :)
If you shake a kettle, does it boil faster?

Hi M.
Apologies for the delay in responding...
The links provided are for searching in multiple columns at once (a single search) or return ranked results (again single search). Is there a way to perform multiple searches at once, i.e. batch processing?
Thanks,
Jay
If you shake a kettle, does it boil faster?

Similar Messages

ATG Browse Search using Endeca Search.

Hi ,
I am trying to implement browse search using endeca search ,basically we are trying to get browse request implemented.
Can someone provide some heads-up on how we can achieve this.
Regards,
Girish

Hi Girish,
I think you basically want to implement all the Browse and Shop pages in ATG application from Endeca.
Couple of steps to follow
1. Create an Endeca Application using DeploymentTemplatePCI
2. Configure your product-sku-output-config.xml to add the required record attributes and dimensions that you would need apart from category and item type dimensions which are provided to you OOTB
3. Perform the baseline update from ATG using ProductCatalogSimpleIndexingAdmin component and check for the indexed records using the Endeca JSP Reference application
4. Create the category and sub-category pages in using Endeca Experience Manager in Work Bench (Eg: /pages/browse, you can show different content to each category by configuring the location)
5. Invoke the page from ATG using InvokeAssemblerDroplet or using the AssemblerPipelineServlet defined in your request handling pipeline.
Let me know if you have any specific questions.
Regards,
Shabari

Issue in performing search using advanced search web part with any of these keywords.

Hi,
I am implementing advanced search web part, and i have added few columns [ these columns are doc lib columns and NOT site columns ],property restrictions dropdown.
and when i try to search for the documents, contents from the subsites with the applied item from the property restrictions dropdown and with "contains" keyword , and filled-in the "any of these keywords"
textbox,
the search results are not displayed , though there are multiple documents which has the keywords.
am i missing any steps here.? i have ensured that managed properties were created and added in the properties.xml file in the adv.search web part's properties.

hi Steve,
thnx for the reply.
here is my xml file details:
<PropertyDef Name="DocComments" DataType="text" DisplayName="Comments"/>
 <PropertyDef Name="CreatedBy" DataType="text" DisplayName="Created By"/>
 <PropertyDef Name="ModifiedBy" DataType="text" DisplayName="Last Modified By"/>
 <PropertyDef Name="WellOWSTEXT" DataType="text" DisplayName="Well Name"/>
 <PropertyDef Name="BlockOWSTEXT" DataType="text" DisplayName="Block Name"/>
 <PropertyDef Name="ProjectOWSTEXT" DataType="text" DisplayName="Project Name"/>
 <PropertyDef Name="LocationOWSTEXT" DataType="text" DisplayName="Location"/>
 <PropertyDef Name="DisciplineOWSTEXT" DataType="text" DisplayName="Discipline"/>
</PropertyDefs>
<ResultTypes>
 <ResultType DisplayName="All Results" Name="default">
 <KeywordQuery/>
 <PropertyRef Name="Author" />
 <PropertyRef Name="Description" />
 <PropertyRef Name="FileName" />
 <PropertyRef Name="Size" />
 <PropertyRef Name="Path" />
 <PropertyRef Name="Write" />
 <PropertyRef Name="CreatedBy" />
 <PropertyRef Name="ModifiedBy" />
 <PropertyRef Name="WellOWSTEXT" />
 <PropertyRef Name="BlockOWSTEXT" />
 <PropertyRef Name="ProjectOWSTEXT" />
 <PropertyRef Name="LocationOWSTEXT" />
 <PropertyRef Name="DisciplineOWSTEXT" />
 </ResultType>
</ResultTypes>
</root>
am using the managedproperties without spaces. the problem is that, when i give the word/words
in the "any of these words" textbox and if i give a value with the "contains" dropdown
its not allwoing me give proper results.
After adding these property restrictions i have done the full crawl again.
@Steven Adnrews: i have done the full crawl, multiple times. Though these columns are NOT created as site columns, it came as managed properties in my Srch Serv.Appln, search schema page.
@Fabian: i am not getting your point.Can you pls tell,where will I see the xsl. i think, the xsl editor and xsl configuration has been replaced by html display templates in SP 2013 Search.

Searches using google search or bing search wind up at pay search results. why is this happening

when i use google or bing searches, it shows me the search results i want, but when i click on the link, the tab says redirecting and it takes me to a completely different site
== This happened ==
Every time Firefox opened
== when i stated using firefox

You possibly have been infected with some type of malware (adware/spyware/virus, etc.). Do a thorough scan of your system.
'''Scan for Malware'''
Install, update and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode", but those are features you really don't need to find and remove the problem that you have. (~~red:'''Not all programs detect the same Malware.'''~~)
Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
SuperAntispyware - http://www.superantispyware.com/
AdAware - http://www.lavasoftusa.com/software/adaware/
Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
Windows Defender - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
Dr. Web Cureit - http://www.freedrweb.com/cureit/
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help:
http://bleepingcomputer.com
http://www.spywareinfoforum.com/
http://www.spywarewarrior.com/index.php
http://forum.aumha.org/
'''Be aware the the Fake Zynga Toolbar'''. I do not know if the Zynga Toolbar you have installed is the real one or a fake one, but you might want to investigate. See: http://www.allfacebook.com/2010/03/toolbars-facebook-password/
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:18~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html

How to retrieve and use an XSL file from CLOB field

I am using Java to query my data and return XML formatted data. I am able to format this data using an XSLStylesheet file. But I want to instead use an XSL Stylesheet stored in a clob field.
I have an XSL file stored in a clob field. How can I retrieve and use it to initialize an XMLDocument and then create an XSLStylesheet.
Thanks for your help,
Les Smith

I think this question has been raised before. Try searching this forum.

How to call Jive Search methods using REST Web Services from ADF

Hi
Can someone provide me an example to call JIVE Search using REST web services from Webcenter ADF.
As we have the similar facility to call UCM Search from WebServices DataControl.
Do we have anything similar like this for JIVE Search?
JIVE 5.1 is deprecating SOAP style web services and so I am planning to use REST.
Any suggestions on this is much appreciated.
Many Thanks
Khad

so what exactly is the problem here?
what is not working?

Linear search and binary search

Hi
can any one tell me what is linear and binary search in detail.
and what is the difference between them .
which one is useful in coding.
Thanks&Regards,
S.GangiReddy.

hi,
If you read entries from standard tables using a key other than the default key, you can use a binary search instead of the normal linear search. To do this, include the addition BINARY SEARCH in the corresponding READ statements.
READ TABLE <itab> WITH KEY <k1> = <f1>... <kn> = <fn> <result> BINARY SEARCH.
The standard table must be sorted in ascending order by the specified search key. The BINARY SEARCH addition means that you can access an entry in a standard table by its key as quickly as you would be able to in a sorted table.
REPORT demo_int_tables_read_index_bin.
DATA: BEGIN OF line,
 col1 TYPE i,
 col2 TYPE i,
 END OF line.
DATA itab LIKE STANDARD TABLE OF line.
DO 4 TIMES.
line-col1 = sy-index.
line-col2 = sy-index ** 2.
APPEND line TO itab.
ENDDO.
SORT itab BY col2.
READ TABLE itab WITH KEY col2 = 16 INTO line BINARY SEARCH.
WRITE: 'SY-SUBRC =', sy-subrc.
The output is:
SY-SUBRC = 0
The program fills a standard table with a list of square numbers and sorts them into ascending order by field COL2. The READ statement uses a binary search to look for and find the line in the table where COL2 has the value 16.
Linear search use sequential search means each and every reord will be searched to find. so it is slow.
Binary search uses logrim for searching. Itab MUST be sorted on KEY fields fro binary search. so it is very fast.
The search takes place as follows for the individual table types :
standard tables are subject to a linear search. If the addition BINARY SEARCH is specified, the search is binary instead of linear. This considerably reduces the runtime of the search for larger tables (from approximately 100 entries upwards). For the binary search, the table must be sorted by the specified search key in ascending order. Otherwise the search will not find the correct row.
sorted tables are subject to a binary search if the specified search key is or includes a starting field of the table key. Otherwise it is linear. The addition BINARY SEARCH can be specified for sorted tables, but has no effect.
For hashed tables, the hash algorithm is used if the specified search key includes the table key. Otherwise the search is linear. The addition BINARY SEARCH is not permitted for hashed tables.
Binary search must be preffered over linear sarch.
Hope this is helpful, Do reward.

Search difference between Search Folders and search on OWA

Sometimes when I Search the Inbox folder on OWA, the search will not return all the emails with a subject line value. However, I also have a Search Folder set up to look for the same subject line value and it does return all the emails.
After a few days it usually fixes itself.
What is the difference between the search using OWA and the search using a Search Folder?
For the OWA search I specify to only search the Inbox and to only search the Subject line.

Hi,
Yes, there are some different results when searching items in OWA and Outlook Cached mode.
When users are using Outlook Cached mode, Outlook uses
Windows Search, a component built-in in Windows 7 and Windows Vista. Windows Search performs content indexing and provides search functionality to Outlook. Interfacing with a local content indexing and search service provides Outlook users running
in Cached Exchange Mode a more efficient way to search their mailbox. For details about Windows Search, see
Windows Search.
When using OWA, the Exchange Search is used. Generally, Search results are limited to the first 100 matches found in OWA. For more information about Exchange search, we can refer to Exchange Search Client part in :
http://technet.microsoft.com/en-us/library/bb232132(v=exchg.141).aspx#ESC
If you have any feedback for TechNet Subscriber Support, contact
[email protected]
Thanks,
Winnie Liang
TechNet Community Support

SharePoint search using Term-IDs doesn't work as expected for various document types and items

If items or documents are tagged with managed metadata terms from the term store (no social tags, but pre-defined terms), you can find this content later on (after crawler has finished) using the following URL query:
http://myserver/search/Pages/results.aspx?k="85f915a2-bd9e-4c94-a840-4323d37e8df9"
The guid is the term ID (from the term store).
Issue:
That works great for office documents. It seems to be not working for several file types like txt, zip, aspx (inside page libraries) etc. All file types are generally registered with search crawler and are found correctly using the normal search, e.g. for
the term name or other content. It also not works for me with custom lists that are tagged with a term.
Questions:
1. Is using this type of search url a documented and advised feature, to find content that is tagged with terms?
2. How to setup search to find this items and documents consistently with "normal" search AND by term ID?
Thanks, Frank
Thanks, SharePointFrank http://www.layer2.de/en/products/

Hello Frank,
SharePoint contents tagged with managed metadata Terms can be searched by doing a search on “TermName”, and the search result could be refined by managed metadata. Please ensure your SharePoint site content source was crawled and Managed Metadata
Service Application was running. Personally, using a TermID involved in the URL to search items tagged with metadata isn’t advisable due to difficulties when manipulating a ID number.
Fabian Williams has included a managed metadata search section in his informative walk through:
http://www.endusersharepoint.com/EUSP2010/2010/06/01/understanding-managed-metadata-in-sharepoint-2010-its-impact-on-taxonomy-navigation-and-search-part-1-focusing-on-managed-metadata-term-store-navigation-and-search/
Let me know if I misunderstand you.
Thanks & Regards.
Lily Wu || Microsoft Online Community Support Engineer || SharePoint

From the context menu I want to always search using Google dot CA, not dot COM

I have already edited "keyword.URL" in about:config This didn't work for the context menu when you highlight a term to search and use the "Search Google for...
It works for typing the search term directly into the URL address bar, but not the search from the context menu.

I already had Google selected there. This still uses dot com for the resulting search page that opens, I wanted to have it open with google dot ca.
I just found this add-on from [http://mycroft.mozdev.org/search-engines.html?name=google.ca MyCroft Project]
Part way down this page, number 5, is [http://mycroft.mozdev.org/jsreq.html Google.ca Search Bar] . Click the previous link to add this engine to the list of the FireFox search engines (on the drop down menu) did the trick, so I guess I solved my own problem. See attached menu capture. I hope this helps someone else, as it took me quite a while to find. It wasn't found in any of the standard Add-Ons you can find at the usual Mozilla multiple pages of add-ons

AVG Secure Search appears when I use Google Search from my Home page only.

My home page is the Firefox default page with the Google searchbar. I like getting occasional messages from Firefox when I log in so I don't want to change my homepage. However, when I use the searchbar ''on my homepage only'', I get the unsatisfactory AVG Secure Search results.
UPDATE: I now realize all the troubleshooting information I included in my original question appears under the "More System Details" link next to the question, not in the body of the question. I have copied it here to make it easier to see what I have already done to try to solve the problem, as well as describe the one clue I have that may be relevant:
I have tried all the fixes on various threads, but my about:config is now pristine (no avg or isearch mentions; keyword.url is default). Closest solution is that at https://support.mozilla.org/en-US/questions/866327 , which requires changing my home page.
Oddly, AVG Secure Search is ''not'' a problem when I use the Google toolbar or search from the Google website, only when I use the search bar that appears on my home (start) page. This is true even when I return to my home page--if I search from the Google search bar in the middle of the page, I get sent to AVG Safe Search. (isearch.avg.com).
I read in one thread a suggestion to delete my chromeappsstore.sqlite file in my Profile folder. As promised, Firefox created a new one when I restarted it; however, the search bar in the middle of my home home page did not work at all. Tried this three times before restoring my original.
I do not have an application that will open a sqlite file, but I tried doing so in Excel and found a cell containing the following:
emoh.:moz-safe-aboutsearch-engine{"name":"AVG Secure Search","searchUrl":"http://isearch.avg.com/search?cid={7A3C25A0-E345-4507-AA31-D98F596A81A9}&mid=c48135235ba247d18ac1d14b344db451-addd29eab2809954d5abdf0b991a5b911a297819&ds=is015&lang=en&v=10.0.0.7&pr=sa&d=&sap=dsp&q=_searchTerms_"}
I have no clue what that means, but it is the only thing I can find related to Firefox that still mentions AVG and isearch.avg.com.
At this point my best guess (but it is a guess) is that the chromeappsstore.sqlite file is a key to the complete solution, but I do not have enough knowledge to go beyond and address it. I appreciate any help you anyone can offer.

Here is the way to get rid of the problem once and for all:
http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=196402#post_196402

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

How can I use LDAP searching from OSX Lion Server to Mozilla Thunderbird?

How can I use LDAP searching from OSX Lion Server to Mozilla Thunderbird? We have a super awesome contacts server that works great for our Mac users. About 30% of our company are on PCs, and I would like to use the Mozilla Thunderbird mail client for them. I see that in Thunderbird I can set up LDAP searching, and would like to have this feature point to our contacts server. I've tried several different settings, and looked all over the web, but could not find the proper way to configure this. Does anyone know if this can be done, or if not, would have a better suggestion? Thank you for your time!!

try double clicking keychain acces should launch and ask if you want to install login, system, System roots
A dialog box will launch asking where to install the cert since your configuring a vpn I would put the certificate it in system.

Using Content search web part to retrieve items from another site collection

I have a web application that contains two site collections(team site + enterprise wiki), with the following URLs:-
-http://applicationname/teamsite
-http://applicationname/enterprisewiki
Now I need to display the latest 10 wiki pages from the enterprise wiki site collection(according to the modified date) inside the team site. So I read that using Content search web part allow for cross-site content query. Currently I added a new content
search web part , inside my team site, and I click on “change query” button. But I am not sure how I can reference the enterprise wiki site collection's wiki page library and to specify that I need to get the latest 10 wiki pages , inside the following dialog:-
Basically this setting partially worked for me, I provide the following settings inside the “Build Your Query” dialog:-
From the “Select a Query” I defined the following:- “items matching content type(system).”
Restrict by app : “Do not restrict results by app”
Restrict by content type “Enterprise Wiki Page”.
This showed all the sites, lists and even pages are based on the “Enterprise Wiki Page” content type. But I am facing these three problems:-
1. The above setting showed only the sites,lists and pages matching the “Enterprise Wiki Page” content type, that exists on another web application, and not that exists inside the current web application.
2. To test the web part , I got the following results, But I was not able to add additional info for the items such as created by, modified by ,etc.
3. Also there is no way to sort the wiki pages by the modified date, as in the Sorting tab inside the “Build Your query” dialog I cannot find the “modified” inside the Soft by list
So can anyone advice how to fix these three problems

Hi,
1. In "Build Your Query" dialog, we can select "Specify a URL" in
Restrict by app and enter another site URL.
2. If you want to add more information for the items, we need customize the display template, the following link for your reference:
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/01/sharepoint-2013-customize-display-template-for-content-by-search-web-part-cswp-part-1.aspx
3. In the Sorting tab, we can use "LastModifiedTime" to instead of "Modified".
Best Regards
Dennis Guo
TechNet Community Support

Searching for a term using the Search tab in HTML Help doesn't find all relevant topics.

I'm using the Search tab in the HTML Help window to search for a few words. But those words are not being located within the topics. For example, one of the words for which I am searching is Australian. I can find the topic that contains that word using the Contents tab. But the Search tab doesn't find it. I have even tried copying the word from that topic into the Search box but it is not found.
Is there a known bug in HTML Help search capabilities?

Is this a stand alone CHM file or is it merged? If it is merged, does the word appear in the search in the CHM containing the topic is searched? I assume you've checked that your Stop List doesn't contain the word being searched?

FullText Searching using a search term from a field

Similar Messages

Maybe you are looking for