Function ALV Refresh Problem

Hi, everybody!
I want change internal table data to display again using function alv. (Refresh)
Please tell me if have a alv function may implement.
No Class ALV.
Thanks Advanced!

Hi,
for your requirement i.e you can change the internal table data after displaying by using edit functionality
in the alv
please check the following code
LOOP AT IT_FIELDCAT INTO WA_FIELDCAT .
    CASE: WA_FIELDCAT-FIELDNAME.
     WHEN 'MATNR'.
        WA_FIELDCAT-NO_OUT = ' '.
      WHEN 'MEINS'.
        WA_FIELDCAT-NO_OUT = ' '.
      WHEN 'MTART'.
        WA_FIELDCAT-NO_OUT = ' '.
        WA_FIELDCAT-EDIT = 'X'.
      WHEN 'MBRSH'.
        WA_FIELDCAT-NO_OUT = ' '.
      WHEN OTHERS.
        WA_FIELDCAT-NO_OUT = 'X'.
    ENDCASE.
     MODIFY IT_FIELDCAT FROM WA_FIELDCAT.
ENDLOOP.
Thnaks & Regards,
Sateesh

Similar Messages

ALV refresh problem

Dear All,
I have a existing alv list in which customer wants a refresh button to fetch the most recent data.
In the report they have used LDB. Hence they are using Get LQUA statement which works as a loop along with end-of-selection.
I have created a button in ALV & up on pressing that button i want to perform the whole operation again. But i cannot use LDB there ( ie Get ) as system throws error.
so i am trying with leave to current transaction , in this case the list gets refreshed but when click on back its not going to selection screen . same as the case with submit .
any idea how to go about this. thanks for your help in advance.
sandeep.

could you split the report into two?
one that collects the data (LDB) and one that shows the list.
so you can submit the collect report from the list.

Editable ALV refreshing problem

Hello,
I have an editable ALV and i modify my db table with this alv.
when i run the report and see the alv, i can make changes and modify the db table.
But after first change, alv doesnt see the othe changes, I change editable fields and save but when i debug i see no change at my internal table.
i refresh the internal table but after first change and save, this code doesnt work :
CALL METHOD go_grid2->check_changed_data.
Is there a trick that i dont know?

the code which i give above is for refresh, for data change try this declaration
    SET HANDLER event_receiver->handle_data_changed FOR g_grid.
    CALL METHOD g_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
when you clicked SAVE button first you must call this method : CALL METHOD g_grid->check_changed_data .

Alv output problem

I have alv output with some values, now I need to put a push button on application tool bar if I change any values in the out put and then press that push button then the new values should be updated with out re execution of the alv program .   how to do it.

Hi Kiran,
<li> The below code is more than enough. It works for your requirement.
<li>Define events
DATA: it_events TYPE slis_t_event,
           wa_event like line of it_events.
<li>Fill events like below.
wa_events-name = 'PF_STATUS_SET'.
wa_events-form = 'PF_STATUS_SET'.
append wa_events to it_events.
clear   wa_events.
wa_events-name = 'USER_COMMAND'.
wa_events-form = 'USER_COMMAND'.
append wa_events to it_events.
clear   wa_events.
<li>Set pf status like below.
FORM PF_STATUS_SET USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING rt_extab.
"When you set pf-status using above statement, you dont see ALV toolbar. To get back all the tools copy status of the any "program status which is using ALV in SE41 transaction code to your program with status you mentioned here.
"Program :SAPLKKBL
"status    :STANDARD_FULLSCREEN
ENDFORM.
<li>Use USER_COMMAND event like below
*&      Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD.
IF R_UCOMM = 'REFRESH'."Create one button on ALV toolbar with function code REFRESH
    RS_SELFIELD-REFRESH = 'X'. "Set this one. It refreshes internal table data with new values
ENDIF.
ENDFORM.                    "USER_COMMAND
<li>Call function module like below
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
         EXPORTING
              i_callback_program = program
              it_fieldcat        = it_fieldcat
              it_events          = it_events
         TABLES
              t_outtab           = i_mard.
Let me know if you have any problem.
Thanks
Venkat.O

Animated gif and page refresh problem

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Animated gif and page refresh problem
Hi There,
I'm trying to build a simple "Please wait......" screen using jsp and javascript.
So far all is going well except that my animatate gif keeps refreshing everything the page is refresh.
Is there a way the i can prevent the body of the page from refreshing?
below is my sample code:
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<jsp:useBean id="StatusBean" class="com1.CandidateRelease" scope="session"/>
<html>
<script LANGUAGE="JavaScript">
function refresh()
<% if (StatusBean.isRunning()) { %>
     //setTimeout("refresh()", 1000);
     setTimeout("location='status.jsf'", 1000);
<% }else{%>
     window.location= "busStopAdmin.jsf";
<%} %>
</script>
<head>
     <script LANGUAGE="JavaScript">
          refresh();
     </script>
</head>
<body>
     <img id="myImage" src="../img/ojp_wait.gif" alt="" width="151" height="36">
</body>
</html>

Smartview 11.1.2.1.102 Refresh problems

I have multiple users experiencing severe refresh problems after upgrading to smartview version 11.1.2.1.102.
Users state Refresh is taking 10-15mins+ when in old version 9x it only takes 1-2mins. In addition users have rebuilt the excel files (copy in new workbook) then all is working fine but when saved/the next day the refresh goes very slow again!
Please can any help?

1. Deleting the Sheet Info fixes the problem for the moment - but the problem soon returns. Do you know what causes the problem, so we can cut the repeating cycle? Is this strictly a multi-user issue? We do have several users that may use the file. Some have version 11.1.2.1.000 (not 103). Oracle's tips doc (http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-102-1612164.pdf) mentions uncompressed metadata stored in the worksheet.
2. Is there a specific version that allows the Sheet Info fix? Oracle's tip sheet says they need Some have version 11.1.2.1.103, but the users we have seen so far can use this workaround on Some have version 11.1.2.1.000. I'd like to know when at what version this fix starts so I can push other users to update. It would be good to know at which version this issue starts.
Thank you - great information in the thread!
P.S. for reference:
From http://www.oracle.com/technetwork/middleware/bi-foundation/epm-tips-issues-73-102-1612164.pdf
In EPM System Release 11.1.2.1, I am opening .xls files with Smart View functions in Excel 2010, but it’s very slow or seems to freeze Excel. How can I fix this?
This is most likely due to an issue with uncompressed metadata stored in the workbook. In most cases, the issue can be found in the first sheet in hidden shapes. Note that the file will open but it may take a very long time, and in some cases the file will open fine with Smart View disabled. In other cases it will not matter. To solve this problem, save a copy of the file and follow the steps below for the version of Smart View you have.
If you are using Smart View 11.1.2.1.103 or above, follow these steps:
1 Open the file (this may take a while) with Smart View enabled.
2 From the Smart View Ribbon, select Sheet Info.
3 Select Delete Smart View Info.
4 Select Workbook and all Sheet Info.
174 Miscellaneous and Product-Specific Tips
5 Click OK.
6 Save the modified workbook.
7 Reopen the workbook.
If you are not using Smart View 11.1.2.1.103 or above, follow these steps:
1 Open the file (this may take a while).
2 Right-click on the tab of the first worksheet and select Select All Sheets.
3 Right-click on the tab of the first worksheet and select Move or Copy.
4 In the drop-down box, select (new book) and check Create a Copy.
5 Save the workbook.
6 Open the new workbook.
7 Refresh the data.

Planning Refresh problem?

Hi All,We have a planning refresh problem. Environment:Oracle repositories on UnixPlanning Server on Win2003Essbase on Win2000When we kicked a planning refresh, it shows that the database is refreshed and when pressed OK, it shows the following error" Object is not allowed when object is closed 3704".Thanks

hi
i found a solution for the Problem in another Forum
http://businessintelligence.ittoolbox.com/groups/technical-functional/hyperion-admin-l/dynamic-calc-formulas-not-refreshed-1719379?cv=expanded
The suggestion is
1. change the Member from Dynamic Calc to Store
2. Refresh (After these Step the Formulas where still out of sync)
3. change the Member from Store to Dynamic Calc
4. Refresh
After these Steps the Formulas are in sync again.
Kevin Kraft
Edited by: Kevin Kraft on Mar 25, 2009 12:33 PM

Screen refresh problem where data is entered and the screen doesn't refresh

Many people in the company are experiencing the odd screen refresh problem where data is entered and the screen doesn't refresh to show the updated result in corresponding cell formulas.
Microsoft have issued a hotfix to fix the issue for Excel 2003 as shown. Microsoft released a hotfix for this problem (<a href="advisory?ID=978908">KB978908</a>). Display memory tends to pick up data from hidden sheets and pastes it
into the active screen. No impact on the file. This occurs when protecting and unprotecting worksheets in VBA. I also suspect that enabling and disabling screen refresh contributes to this problem. In any case there is a fix, albeit with the following disclaimer:
As of yet I have not been able to find a fix for this for office 2010 and 2013, Any suggestions would be great.

Hi,
Based on your description, Excel does not show the text strings when you typing. It may be caused by the cell format, if we set the cell format as ";;;" in custom format, it will not display the text that you typed.
And the issue may be caused by the third-party input method, there are some compatibility issue between them.
If the issue still exits, please try the following methods
Verify/install the latest updates
Repair your Office program
Regards,
George Zhao
TechNet Community Support

Container (JPanel) refresh problem

Hello,
In fact i have a panel (mainPanel) with a button OK, a another panel which display a specific MyJTable and combo box.
In fact, when I clic OK Button, i want to charge my MyJTable with data depends on comboBox.
First, i display a empty white panel and when i clic Ok i want to display my MyJTable.
JPanel mainPanel = new JPanel();
JPanel emptyPanel = new JPanel();
JPanel combo = new JComboBox();
JButton okButton = new JButton();
MyJTable myJTable;
mainPanel.add(emptyPanel);
mainPanel.add(combo);
mainPanel.add(okButton);I have a refresh problem, i try mainPanel.remove(emptyPanel) and thus mainPanel.add(myJTable), the remove works but the add no :(
In ActionPerformed method when okButton:
myJTable = new myJTable(combo);
mainPanel.remove(emptyPanel);
mainPanel.add(myJTable);
mainPanel.repaint();Thanks for yu help!!

Hi,
have you tried playing with
mainPanel.revalidate();
mainPanel.revalidate();??
Might help
Phil

Screen refresh problem with Windows 7

Hello all,
I've recently begun testing Oracle with Windows 7 on a new HP 2540p notebook computer. I've encountered a very strange issue so far. After logging into Oracle, and Windows switches to Windows Basic theme, I should be taken to the main Navigator screen. But instead, the screen is simply white. If I drag (or nudge) the title bar just a bit, the screen refreshes and I can see the menu items. Then if I click on something (or even use hotkeys - ALT+F to get the file menu, for example), I don't see anything happen. But if I move the window just a bit, the screen refreshes and I can see that it did actually take my input, it just didn't re-draw the screen. I'm wondering if this may be a graphics driver issue (I do have the latest driver for the Intel Graphics Media Accelerator HD adapter), or if someone could point me toward a resolution to this problem. Any help is much appreciated.

Dear All,
Same problem of REFRESH PROBLEM also faced by but only a single and specific Windows 7 client.
if you have resolved the issue , so please share with us.
Thanks
Eidy

Datagrid refresh problem?

fileListArray.refresh();
dg_curtainmanager.invalidateList();
dg_curtainmanager.invalidateDisplayList();
<mx:DataGrid id="dg_curtainmanager" showHeaders="true" editable="true" includeInLayout="false" dataProvider="{fileListArray}" creationComplete="" variableRowHeight="true"   wordWrap="true" rowCount="{fileListArray.length}" width="100%" >
<mx:DataGridColumn headerText="Parent Folder" sortable="true" editable="false"   width="250" minWidth="65" wordWrap="true" >
                        <mx:itemRenderer>
                            <fx:Component>
                                <mx:HBox width="100%"
                                         horizontalAlign="left" verticalAlign="middle">
                          <mx:Image source="@Embed(source='images/edit_16.gif')" toolTip="Select Starting Folder" buttonMode="true" click="outerDocument.parentfolderimagclick()" />
                                    <mx:Label text="{data.document_folder_name}" color="black" />
                                </mx:HBox>
                            </fx:Component>
                        </mx:itemRenderer>
                        </mx:DataGridColumn>
</mx:DataGrid>

@welcomecan,
What refresh problem you are facing.. in DataGrid? When you change your DataProvider for your grid the values are not being changed or somethingelse..??
Please always be clear in explaining your problem in order to get it resolved..
Thanks,
Bhasker

Function of Refresh Button in Web interface

Hi All,
I have created a web layout in which there is "REFRESH" button.
If i have opened the web layout and i simultaneously do some changes in back end from BW side. After clicking refresh in web interface changes are not reflected.
What exactly the function of "REFRESH" button is??
Also is there any other way through which i can get the changes( done in back end) reflected in my already logged in Web layouts??
Thanks in advance.
Regards.

Hi,
Thanks for your reply.
Can you clarify it more. Lets take an example. If i have one charachteristics for project say A and i have prepared a layout which is showing that projects attributes like project's begin date, end date, etc..
Now if i open the Web interface and at the same time if i change its end date from back end, on click of refresh the changes are not reflected...
But if i again open that Web interface changes are reflected. What is reason for this??
Any help appreciated.

Forms Refresh Problem on The Web??

i have a form coded in 6i. in this form i have around 20 buttons one below another and each of the button has a stacked view associated with it. whenever i click on a button i am opening the relative stacked view on th content canvas and repositioning the rest of the bottons and views by moving them down.
Now the problem is it works fine in client-server, but when i run it on the web, when i try to open any of the buttons the screen scrolls automatically to the top. I also noticed that if i wait for a few seconds(or sometimes minutes) the form takes me to the correct position. i think there is some refresh problem. i tried Syncronize also but to no use.
i would appreciate If someone can help me out on this ASAP. (thanks for the patience in reading this long mail!!)

Try to instal the latest version of Jinitiator. I have similar problems, but my case is not so bad. Jinitiator develops very quickly and as i have heard it works now fine.

G5 quad gf6600 refresh problems

I have refresh problems (never had it with 2.5 bipro)
in photoshop the layers do weird things and leaves traces.
in lightwave if i select a point op poligon, nothing seems to happen, only when i resize the view it refreshes.
lightwave is freshly installed, ph is a port from the old mac

upgraded programs

Refresh problem with dreamweaver cs5.5

Hello, I hope someone can help out soon with my problem. We currently have a great running site that is hosted OFFSITE. Our programmer built a new site which is the one having the refresh problems with. It's hosted on an ON-SIGHT server . thank you
Problem:
Sometimes randomly, but almost always when opening other pages, DW freezes for about 5-10 seconds, sometimes crashing (presumably when it takes longer).
It occurs whether changes are made to files or not. I'm using split view it happens mostly whien trying to click something in code view at top.
Test Results:
I was able to consistently reproduce the problem when opening files in the directory.
I was unable to reproduce the problem when opening multiple Include files (that do not use templates).
Thoughts:
Is there something in the template causing the refresh problem?
Something in the new website page source, or in their shared template, may be loading from a (slow) external resource.
Something in the DW settings?
HELP THANK YOU

Could you post a screen capture of your File > New dialogue window when you choose it from the menu?
Page From Template should be an option on the far left if I recall correctly (it has been changed in newer versions, but I think 5.5 still used this method). You won't see it in the Welcome Screen or if you hit Ctrl +N. You have to use the menu option to select New...
You should then be presented with a list of sites, when the site is chosen, the templates should show in the middle column.
Or are you saying your template isn't showing when you choose the Page From Template option and select the site?

Function ALV Refresh Problem

Similar Messages

Maybe you are looking for