Function for reading delivery address

I am looking for a simple bapi or fm to get delivery address from input fields EKPO-EBELN and EKPO-EBELP
kind regards
Andreas

Hi,
Refer these FM's
MM_DELIVERY_ADDRESS_FOR_BAPI
/ISDFPS/DELIVERY_ADDRESS_GET.
These FM's will suit for your requirement.
Regards,
Jyothi CH.

Similar Messages

Sorting TO for group & delivery address

Folks,
I have the following scenario:
I create 1 shipment with multiple deliveries for multiple delivery addresses. Based on this shipment I create a group (VL35_S) and based on the group I create 1 TO. HOw will the sorting on the TO take place? Will it take over the exact sort of the stages in the shipment? So based on the sequence of the deliveries in the shipment, it will create TO items?
Beside above, the to location is the delivery number. Is it possible to have either the address as to location or have the address printed on the TO?
Thanks.

Hi,
You can create a sort profile in the config. based on which the TO items will be sorted.
Logistics Execution->Warehouse Management->Activities->Transfer Orders->Define Profile->Sort Profile for TO splitting.
If that does not suffice the requirement then you can go ahead and sort TO items with in the User-Exit 'MWMTO012' Function Module 'EXIT_SAPLL03A_012'.
Thanks
Funky Tech.

How to create an address code for PO delivery address?

Hi Guys,
How to create an address code for the delivery address in the purchase order? Please explain me with details.....
Thanks
Raja

delivery adress records can be created with transaction MEAN.
the number is purely internal.
In ME21N you can then search by name (you will certainly not know the number)

Give me some examples for functions for read POST, write POST, modify POST

Give me some examples for functions for read POST, write POST, modify POST, create and delete theme in forum. This functions have to be make like Remote Methods

Give me some examples for functions for read POST, write POST, modify POST, create and delete theme in forum. This functions have to be make like Remote Methods

FM for Uploading Delivery address for Components for PM Work Order (IW31)

Can any one please help me out in finding any Function module or any other method for uploading the Delivery address for Components to SAP system in transaction IW31 for PM Work Order.

Hi
I am using text items (T Text item).Therefore, there will be no checking for those items form a MM prespective.
There is no error appear. The only thing is that i have status MANC (Mat.availability not checked) on my WO
I'm just trying to figure out if status should be removed some how, or if this is the normal behaviour.
Many thanks
Joana

Like Ini related functions, is there any functions for reading other functions like .c, .h file

Hi,
For reading the *.ini file there are many Ini realted functions. Like that I need in built function in CVI to read the files like
*.c, *.h line by line. Actually string searching function is not helping me as I want to read it line by line and perform
the operations in which I am interested.
Can anyone help me on this?
Thanks and Regards
Nagraj B

It's not clear to me what you are aiming to, but reading a text file line by line can be accomplished by ReadLine () function.
Parsing the line read to intercept special keyword can be done via regular expression instrument driver, which is included in CVI distribution.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

SQL Function for calculating IP Address

Hi Experts ,
I have an IP Range i need to find out the First Host detail for the IP using a SQL scalar function .
Example : 11.30.10.40
Subnet Mask is 26
Output required
First host: 11.30.10.1
am confused how i can derive the first host values from a sql function kindly help .
Thanks
Priya

DECLARE @Mask TINYINT = 26;
DECLARE @AddressIP VARCHAR(15)= '11.30.10.40';
DECLARE @AddressValue BIGINT = PARSENAME(@AddressIP,4)*CAST(256*256*256 AS BIGINT)+PARSENAME(@AddressIP,3)*256*256+PARSENAME(@AddressIP,2)*256+PARSENAME(@AddressIP,1);
WITH
n0(n) AS (SELECT 0 UNION ALL SELECT 0)
,n1(n) AS (SELECT 0 FROM n0 a CROSS JOIN n0)
,n2(n) AS (SELECT 0 FROM n1 a CROSS JOIN n1)
,n3(n) AS (SELECT 0 FROM n2 a UNION ALL SELECT 0 g FROM n2)
,t (n) AS (SELECT ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM n3)
,bits(b,v) AS (SELECT n,POWER(CAST(2 AS BIGINT),32-n) FROM t)
SELECT @AddressIP [Address]
,CAST((SUM(v) / 256 / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST((SUM(v) / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST((SUM(v) / 256) % 256 AS VARCHAR(3)) + '.' + CAST(SUM(v) % 256 AS VARCHAR(3)) [Netmask]
,CAST(((SUM(v) ^ 0xFFFFFFFF) / 256 / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((SUM(v) ^ 0xFFFFFFFF) / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((SUM(v) ^ 0xFFFFFFFF) / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((SUM(v) ^ 0xFFFFFFFF)) % 256 AS VARCHAR(3)) [Wildcard]
,CAST(((@AddressValue & SUM(v)) / 256 / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((@AddressValue & SUM(v)) / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((@AddressValue & SUM(v)) / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((@AddressValue & SUM(v))) % 256 AS VARCHAR(3)) + '/' + CAST(MAX(b) AS VARCHAR(2)) [NetworkAddress]
,CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue) / 256 / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue) / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue) / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue)) % 256 AS VARCHAR(3)) [BroadcastAddress]
,CAST(((@AddressValue & SUM(v)) / 256 / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((@AddressValue & SUM(v)) / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((@AddressValue & SUM(v)) / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((@AddressValue & SUM(v))) % 256 + 1 AS VARCHAR(3)) [FirstHost]
,CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue) / 256 / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue) / 256 / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue) / 256) % 256 AS VARCHAR(3)) + '.' + CAST(((((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue)) % 256 - 1 AS VARCHAR(3)) [LastHost]
,(((SUM(v) ^ 0xFFFFFFFF)) | @AddressValue) - (@AddressValue & SUM(v)) - 1 [TotalHostCount]
FROM bits WHERE @Mask BETWEEN 1 AND 32 AND b <= @Mask
Jon

Update to Acrobat 9.5.1 breaks Flash functionality for reading archived emails

On installing update 9.5.1 to Acrobat Pro on WinXP, I can no longer read the index of previously archived email collections created using the Email to PDF macro in Outlook 2007.
The PDF data file indices were readable before, and are still readable in Acrobat X Reader. Hence the data file content seems to be correct.
I get the error message as below and then on Cancel (as the download page does not work) I can only see the first email in the collection as a two pgae PDF, which is limited to say the least.
Please advise how I should restore the functionality I had prior to this upgrade.

Yes, as I said in my original post.the link to the download page did not work. Also as Acrobat X Reader worked (on the same computer), then the required Flash software was already somewhere on my computer
However, this issue has now been resolved by applying the recent update from Acrobat Pro v.9.5.1 to v.9.5.2, reopening the PDF portfolio and following the link in the new dialog box that appeared, to go to the correct Adobe(R) webpage to download and install the Flash Software update. This latest webpage has a date of this month (August 2012).
As of v.9.5.2 this problem is solved.

Function for reading from serial port

Hi experts,
We are trying to read data from the serial port with the following function we got from internet.
The problem is when creating the object with the sentence CREATE OBJECT o_obj '"MSCOMMLib.MSComm.1"'.
This returns a sy-subrc = 2 and shows the exception NO_CREATE_OBJECT.
We already copied the file MSCOMM32.OCX in c:\windows\system32 and we successfuly registered it, with regsvr32.exe.
We tried it with Windows XP and Vista.
Anybody has any idea?
Thanks in advance
FUNCTION ZSERIALCOM.
""Interfase local
*" IMPORTING
*"     REFERENCE(MODE) TYPE I DEFAULT 0
*"     REFERENCE(COMMPORT) TYPE I DEFAULT 1
*"     REFERENCE(SETTINGS) TYPE C DEFAULT '2400,N,8,1'
*"     REFERENCE(OUTPUT) TYPE C OPTIONAL
*" EXPORTING
*"     REFERENCE(INPUT) TYPE C
*" EXCEPTIONS
*"      NO_CREATE_OBJECT
TYPE-POOLS: sabc.
INCLUDE ole2incl.
PERFORM init.
PERFORM open_port USING commport settings.
IF mode = 0.
    PERFORM read_port
    CHANGING input.
ENDIF.
IF mode = 1.
    PERFORM write_port
    USING output
    CHANGING input.
ENDIF.
PERFORM final.
ENDFUNCTION.
DATA: o_obj TYPE ole2_object.
*& Form Init
text
--> p1 text
<-- p2 text
FORM init.
DATA:
wa_repid LIKE sy-repid.
wa_repid = sy-repid.
CALL FUNCTION 'AUTHORITY_CHECK_OLE'
EXPORTING
program = wa_repid
activity = sabc_act_call
application = 'MSCOMMLib.MSComm.1'
EXCEPTIONS
no_authority = 1
activity_unknown = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CREATE OBJECT o_obj '"MSCOMMLib.MSComm.1"'.
IF sy-subrc <> 0.
RAISE no_create_object.
ENDIF.
ENDFORM. " Init
FORM open_port *
--> COMMPORT *
--> SETTINGS *
FORM open_port USING commport settings.
SET PROPERTY OF o_obj 'CommPort' = commport.
SET PROPERTY OF o_obj 'Settings' = settings.
SET PROPERTY OF o_obj 'InputLen' = 0.
SET PROPERTY OF o_obj 'PortOpen' = 1.
ENDFORM. "open_port
FORM read_port *
--> INPUT *
FORM read_port
CHANGING input.
DATA:
wa_buffer TYPE i.
DO 10 TIMES.
GET PROPERTY OF o_obj 'InBufferCount' = wa_buffer.
IF wa_buffer > 0.
GET PROPERTY OF o_obj 'Input' = input.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " read_port
FORM write_port *
--> OUTPUT *
FORM write_port
USING output
CHANGING input.
DATA:
wa_buffer TYPE i.
SET PROPERTY OF o_obj 'Output' = output.
DO 10 TIMES.
GET PROPERTY OF o_obj 'InBufferCount' = wa_buffer.
IF wa_buffer > 0.
GET PROPERTY OF o_obj 'Input' = input.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
*& Form final
text
--> p1 text
<-- p2 text
FORM final.
SET PROPERTY OF o_obj 'PortOpen' = 0.
FREE OBJECT o_obj.
ENDFORM. " finalbligw

Hi ,
I want to read value form weigh bridge through COMM port. I have developed the FM and done the setting as mentioned in the below link
Read COMM port using ABAP w/o third party software
but while executing the FM independently I am able to get the value from the COMM port,but when I call the FM from a program I am not able to get the output value from the FM.I am calling the FM from the report program.please find the code below.
report test.
data : lv_input TYPE c.
CALL FUNCTION 'ZFM_WEIGHINTERFACE'
EXPORTING
    MODE                         = 0
    COMMPORT               = 1
    SETTINGS                  = '1200,N,8,1'
    OUTPUT                     = ''
IMPORTING
    INPUT                        = lv_input
EXCEPTIONS
    NO_CREATE_OBJECT       = 1
    OTHERS                 = 2
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
if I execute the FM independently the output is getting perfectly.but while calling from a program i am facing the issue..
any suggestion is appreciated.
Thanks
Vivek

Delivery Address coming as a default in the home screen for creating a SHC

Dear Experts
I have done some changes in the delivery address and while saving it was asking to maintain as a default address otherwise it was not able to save the changes I made.So I maintained it as a default and saved the changes.
Now the issue is when we are in the home screen for creating a SHC this delivery address is coming as default.As we dont want this dekivery address to be default on the screen and the requirement is that user should be able to search the delivery address.
So we dont want that defaulted address.The other reasons were also checked and no where in the attributes we ahave maintained this default delivery adress.
Can you please help us how can we remove this defaulted delivery addres in the SHC creation screen.
Thanks and Regards
Vikas

HI Muthu
Thanks for the reply.
I again repeat I think you have not understood my question.These are very basic things you are mentioning about how to change the delivery address.i know all about this and in my query I have clearly asked that during the change option its asking to maintain the default delivery address and even if I dont select it my changes wont be saved.Second is even if I maintain another delivery address only then from the first delivery address the default screen will be unticked.
Because the issue here is that what ever the delivery address is maintained its defaulting in the shop screen for the creation of the SHC.
So my reequirement is how to set this.I have checked attributes and nowhere this delivery address has been maintained.
Brief about Issue:
We have done some changes in the delivery address (Transaction Edit
internal addresses in the URL screen)and during the save it was asking
us to maintain it as a default address without which it was not able to
save.So after saving on the creation of the shopping cart screen this
delivery address is coming as a default value.
We dont want this to be defaulted and the user should have the search
functionality for the delivery address.This problem is happening for
the org id for which I have done the changes.When i assign my user id
to the other org id the defaulted delivery address is not shown on the
shopping cart creation home screen.
We have checked in the attributes of the user and the org id and
nowhere this delivery address has been maintained.
I have checked the settings for the other org id for which it was not
showing as defaulted on the shopping cart creation screen and compared
these two and was not able to find any difference.Could you plase let
us know the problem in this case.
Regards
Vikas

Hide function in Login Items doesn't work for iChat and Address Book app.

There is a problem with the hide function for iChat and Address Book application in Login Items. If you go to System Preferences, click on Login Items, add the iChat and Address Book application to the Login Items, activate the hide function for iChat and Address Book application and restart your Mac iChat and Address Book application will start with opening a window. Normally this shouldn't happen if the hide function in Login Items is activated for iChat and Address Book application.
Message was edited by: Roman Patrice Gego

Hi,
Your link refers to changes to 10.6.3 prior release as tested by Developers.
The numbering system tells us that. (Build 10Dxxx).
Therefore it is an Update and not an Upgrade, therefore no-one is going to get charged.
If the article is the so called Release Notes then they mention nothing about correcting any issue with Login Items Hiding.
If you think an issue is being missed there is a place to report that, from this icon view list http://www.apple.com/feedback/ which includes Hardware and Software.
I personally have not tested Login Items Hiding as I tend to think there is no point in having an App open if it not on the Desktop.
As Kappy pointed out there was little progress on a similar issue with Leopard.
This could be interpreted that Apple feel that the issue does not effect enough people or that other issues are more important.
As anyone and everyone can report Issues and contribute their ideas to the OS and it's improvement via the Feedback links it would seem to be a question of enough people bringing it to Apple's Attention.
I would tend to work on Issues that stopped an App functioning first, linked with integration with the OS and any changes to the major parts of it such as a Quicktime.
Lesser issues that maybe more cosmetic in appearance would tend to fall down my list of things to do.
Presumably Apple have a grading system on such things that may not fit with either of our views.
As Apple don't reveal any details about the OS Updates or even Upgrades then anything any of us think we interpret as a pattern is just that - an interpretation.
Consequently anything we say on the subject is then likely to be seen as speculation under the Terms of Use of these Boards.
8:28 PM Sunday; May 9, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Fields and Table for Delivery address in a PO

Hi Gurus,
I want to find out the fields and the corresponding table for the delivery address in a PO (line item details). It is the address of the plant. I searched the tables ADRNR, ADRN2 and one customized field (/GLB/Ship_to) in the table EKPO, but of no help. I can find out from other tables the address of the plant, but I want to go to a table for PO, where I can have the delivery address/ship to address.
Please help.
Thanks,
Kumar

Hi
For Plant Address, check the table T001W
If you want complete address details, take the ADRNR field value from T001W and pass it to the field ADDRNUMBER of table ADRC, you will get the details.
Normally addresses are stored in the table ADRC. If you gave any other Delivery Address in the PO, instead of Plant, get the value of ADRN2 from EKPO and pass it to ADDRNUMBER of ADRC and you will get the address detials.
Edited by: Arun R on Dec 17, 2010 2:39 PM

Delivery Address (ADDR_SHIPT)

Hi All,
I have a couple of questions regarding delivery addresses (ADDR_SHIPT attribute in PPOSA_BBP) in SRM 5.0 (Server 5.5):
1. In config I have set up the Address Determination for Business Partner so that my Ship-To Address uses the standard address (thereby not requiring a customised program to create delivery addresses). I have read several threads regarding the creation of delivery addresses and the threads I have read seem to recommend a customised program - therefore I am curious as to whether there are any problems with the config I have made?
2. My understanding is that in order for a delivery address to default into a user's shopping cart and to appear in the search for delivery addresses, the org unit to which the delivery address belongs needs to be marked as a "Company". Does anyone know how I can change this so that the flag is not required?
Thanks in advance,
Paula.

Nimish,
In SRM, you can create addresses in the system (stored in table ADRC) and asssign them to a business partner.
This business partner should be your company code org ID defined in PPOMA_BBP.
The format of your flat file should contain the fields needed by the function I gave in this thread. It should at least contain the mandatory fields (ex: description, name, street, post code, city, country).
One issue: the addresses might be created with the BUPA/company name instead of the entered name/description (this can be overrided by a BUPA BADI).
Those addresses will get a new address number in SRM (ADRC & BUT020).
When transfering data to backend documents, delivery addresses can be passed to R/3, where a new address will be created (a new ADRC entry).
Look at a recent thread on transfer of delivery address to R/3 and related OSS notes.
Rgds
Christophe

Print delivery address in a Purchase Order

Hello,
Could you please tell me, what I should to do for print delivery address in a purchase order?
I need to configure or activate these fields: Name y Street/House number in the PO printed
Thanks!!
Best Regards,
Mariela

the delivery adress is storage location address, if storage location has an address and is entered in the PO.
the delivery adress is plant address, if no storage location is entered in the PO or the storage location does not have an address.
or the delivery address is taken directly from POs delivery adress at item detail if maintained manually there.
If it does not print, then you may use a customized form which is not prepared to print the address.
If that is the case, then contact the developer of the form.

Ship to party and Delivery address Different?

The requirement is that the Ship to party address be different than the delivery address.
Options i have thought about is
1) Maintain the ref address in TEXT.
2) Maintain a separate partner function.
Please give suggestions as to how can we maintain 2 different addresses for the same ship to party?
The user wants to have both addresses on the document.
The TEXT option is not acceptable by the user.
Please help.
Thanks in advance. Point will be awarded for any helpful answer!
Regards,
Shrads

This kind of requirement is very common in Consumer goods industries. I have worked on similar kind of requirement and we have mapped it in sap as below.
1.Create customer master record with a new account group for the delivery address with parnter funciton as SF(Ship For)
2.Assign this SF record in SH master record or SP record
2.In sales document parnter determination proceudre include the parnter function SF by fetching it either from ship to master recrod or sold to
Please let me know if you need any further details.
Thanks,
Srini

Function for reading delivery address

Similar Messages

Maybe you are looking for