Function Module to activate objcts

Hi,
Is there any function module which will do a syntax check and activate objects, and return errors and status whether object was activated or not.
Any help would be appreciated.
Thanks in advance.
Mick

Activation is a little more complex I think. Depending on the object, there would be different implementations of the actviation process. For example, there is a function RS_FUNCTION_ACTIVATE which appears to activate a function, in the underlying code you can see that it deals heavily with the INSERT REPORT statement, which writes the source code in an active state, this is basically the way that regular programs are activated as well.
What object are you referring to specifically?
Regards,
Rich Heilman

Similar Messages

ABAP Program or Function Module to activate infospoke/openhub table

Hi,
Post migration to production, when i am trying to load the data in open hub table, its showing OH table is not active. i had tried to all aspect but i am unable to load the data.
is there any ABAP Program or Function Module to activate infospoke/openhub table
Thanks & Regards,
Pankaj Bansal

Hello Pankaj,
Please check whether you have access to TCode SE14 . If Yes , You can use this TCode to activate the Tables.
There are lot of Posts talk about the procedure for activation through SE14. please refer the same
Thanks & regards,
Prasath

BTE Name in Called Function Module

Hello,
A function module say XYZ is called from a BTE. Can I know the name of the BTE which called the function module XYZ inside the function module XYZ ?
With Regards,
Avisesh.

I think this document may help you...
<b>Business Transaction Events</b>
This activity describes how you can connect additional components (such as in the form of function modules developed yourself or a product from an external software provider) to the standard R/3 System.
There are two types of interface available in the General Ledger
Accounting (FI-GL), Accounts Receivable and Accounts Payable
(FI-AR/FI-AP), and Sales and Distribution (SD) components for this:
1. Publish & Subscribe interfaces (also called "informing interfaces" in the following) These should inform you about particular events (such as a document being entered) in the SAP standard application and make the data generated as a result available to the external software. The external software does not return any data to the standard R/3 System.
(I'm confused. MIT is using two business transaction events for the SD to FI interface. Both of these events are Publish & Subscribe interfaces. They both return data to the SAP standard application! They both change the FI document before it is posted. What I've figured out is that if there is an export to memory and an import from memory before and after the function call, then we can't modify the data. We can check this in the calling function module - OUTBOUND_CALL_00503110_E or OPEN_FI_PERFORM_00001020_E, etc)
Examples of such events in the R/3 System are:
Master record was created, changed, or blocked
Document was entered, parked, changed, or reversed
Items were cleared or reset
Additional processing can be caused in the additional component on the basis of these events and data:
Starting a workflow
Generating or changing additional data
Requesting correspondence
FI Clearing (F-32) calls (gathered via SE30):
Function OPEN_FI_PERFORM_00001020_E (can't modify data)
00001020 POST DOCUMENT: Prior to final checks
EVENT
This Event is reached prior to completing the document. The checks that are carried out at this point include checking, prior to posting, that the document balances to zero, and calculations for tax offsetting. This Event is accessed once per standard posting process and is similar to validation at document level (Event 0003). A document number has not yet
been assigned when this Event is reached.
INTERFACE
All document line items created and the document header data are
transferred (both as tables).
Parameter
T_BSEG
T_BKPF
Function OPEN_FI_PERFORM_00001025_E (can't modify data)
00001025 POST DOCUMENT: Final checks completed
EVENT
This Event lies following all checks on the whole document, but prior to number assignment. Following this Event, no further error messages may be sent. The document is complete at this point, and no further changes can be made to it prior to posting.
INTERFACE
All current data, all document data relevant for the posting, and various control parameters are transferred to the additional component. At this point you can still implement your own checks on the current document data.
Parameter
I_BKDF
T_AUSZ1
T_AUSZ2
T_AUSZ3
T_BKP1
T_BKPF
T_BSEC
T_BSED
T_BSEG
T_BSET
T_BSEU
Function OPEN_FI_PERFORM_00001030_E (can't modify data)
Function OPEN_FI_PERFORM_00001140_E (can't modify data)
2. Process interfaces (also referred to as "process" in the following) Process interfaces are used to submit business processes to a different control which cannot be realized with the standard system, that is process interfaces replace standard processes. Here you can structure determination of individual field contents or of specific reactions to process flows individually. It is possible to connect different external developments to the standard R/3 System. The additional developments are generally carried out using the ABAP/4 Development Workbench. This way you can, for example, influence the control of payment transactions. Selection of payment method, house bank and partner bank can be made using the payment data (currency, amount, and payee) according to a selection logic which you have defined.
FI Clearing (F-32) calls:
Function OPEN_FI_PERFORM_00001120_P
Function OPEN_FI_PERFORM_00001130_P
Function OPEN_FI_PERFORM_00001150_P
Function OPEN_FI_PERFORM_00001170_P
Standard Settings
Sample modules are delivered in the standard R/3 System which you can
copy into your name range and fill them with statements there.
Activities
1. Enter a product using "Settings -> Customer's products". Actually, in 4.6C, from transaction FIBF (IMG -> Financial Accounting -> Financial Accounting Global
Settings -> Business Transaction Events):
Settings -> Products -> ...of a customer
There are generally a large number of function modules belonging to a product which can be called by different program events from within the standard R/3 System. A product can also be an external software component. If the product is in an external system, enter an RFC destination here. If the product is in the same system, you do not have to enter anything. Important: Do not forget to activate the product after making the following settings.
2. Establish the interfaces with which the R/3 System provides you. To do this, choose
Environment -> Info system (P/S)
or
Environment -> Info system (Processes).
Execute the program. You should enter "A" as the
attribute type. You see the respective interfaces with which the R/3 System provides you. Note the key of the interface which you require.
You can also select:
By particular SAP application components
By particular events by entering intervals
Which interfaces are used in activated products
Which interfaces are used within a particular country version or within a particular industry
Which interfaces are used within a particular customer product
3. Enter the function module which you have developed yourself. To do this, choose either Goto -> Edit modules within the info system or Settings -> P/S modules or Process modules -> Customer's in the "SAP Business Framework" menu. Make the following entries:
Key for the interface
The product that you want to use
Function module which belongs to this product.
You can also enter several function modules for a product. Caution:
The function module must be within your name range, that is must begin with the letter Z. You leave the Ctr and Appl. fields blank unless you want a particular country version or a particular SAP industry-specific component to be enhanced or replaced instead of the standard process flow.
4. Fill the source text of your function module
and activate it. To do this, go again via Environment -> Info system (P/S) or Environment -> Info system (Processes) into the information system and execute the program. Then proceed as follows:
Click twice on the interface you have chosen. If you want, you can look at the interface at this point by choosing Goto -> Interface. Then choose the Back function again afterwards.
Place the cursor on the relevant line and choose Goto -> Function library. You see the sample function module delivered by SAP.
Copy the sample module delivered by SAP and call it the same as the function module entered in step 3.
Fill the source text of the empty function module.
Activate the function module.
Activate the product as described in step 1.
5. Run the R/3 program affected and test whether calling your function module works.
Further Notes
The other menu paths are only used for information about additional components delivered by SAP or about software already installed by external software providers.

Do we have standard function module or program to activate transformation?

Hi Gurus,
Do we have any standard function module or program to activate transformation in BI system? If yes please let me know or let me know how to proceed with to create custom program to activate transformation.
Thanks,
Manoj

Hi Sven,
Thanks for your help.
Even I am facing the same problem, we didnt want to open the production system to activate the transformation also it take time to transport them every time from development
can you please explain how to use these methods, what parameters to pass
do you have a sample code, it will be of great help.
use this methods
cl_rstran_trfn=>factory
cl_rsds_rsds=>if_rso_tlogo_general~get_instance
l_rsds->if_rso_tlogo_maintain~is_active
l_rsds->if_rso_tlogo_maintain~activate

How to activate a function module programatically?

How to activate a function module programatically?

Hi,
You can try the following function module:
RS_FUNCTION_ACTIVATE
Thanks and regards,
S. Chandra Mouli.

Activate/implement function module

Hi,
How to activate/implement function module?
Thx.
Anirudh,

hi,
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Function Modules are Global ABAP programs created by SAP for reusable purpose. They have IMPORT, EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exceptions of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception is defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
regards,
rewards point.

Error in creation of function module in e.c.c 6.0

HI GURUS,
i encountered a problem while creating function module in e.c.c 6.0, the error is 'THE MAIN PROGRAM OF DOES NOT BEGIN WITH "FUNCTION-POOL". kindly help me in solving this issue.

Hi,
You need to activate the Function Group.
GO to Se80 --> Select function group from list box --> press enter --> Select you function group > Right click> Activate.
Thanks,
Sriram Ponna.

Help in Creation of a Function Module.

Hi Abapers,
                I am new to ABAP and hardly have knowledge abt it. I need to create a Function Module which is of the type RFC. Pls provide me information and steps to create the same.
Many thanks in Advance.

Hi Pooja,
Please follow the below steps to create a function module :
1. Goto Transaction code : SE37.
2. Create a Function Group first.
   a) From the Menu Bar Choose Goto -> Function groups -> Create group.
   b) Specify the function group name and a short text.
   c) Choose Save.
When you create a new function group, the system automatically creates a main program containing two includes. Like any other programs and includes, you can display them in the Repository Browser.
3. Now create a Function Module.
4. Enter the function's name in the field Function module.
5. Choose Create.
6. In the Enter function group dialog box, enter the function group to which you want to assign the function module.
7. In The Attributes Tab select Remote Enabled Module (since you want a RFC function module ).
8. Give the Import and Export parameters and exceptions(if any).
9. Write the functioning part of the fuction module in the Source code tab.
10. Save and Activate your function Module.
Now go ahead and use your function module where ever you want.
Hope it helps.
Reward if helpful.
Regards
Hemant Khemani

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

Function modules used in CG02

Hi,
Does anyone know the standard function modules or tables related to the transaction CG02.
I have a requirement to fetch the plating data of certain specifications.The plating data is being displayed on the transaction.but we don't know from where it is being fed or stored.
Your suggestions would immensely help.
Thanks and Regards
Hema.

As I don't have this Tcode configured in my system
OK.
In session 1.
Goto ST05 tcode and the click on Activate Trace
In session 2.
You execute your transaction CG02 and navigate to the place where the data you are looking for.
Back to session 1.
Click on deacticate Trace
Click on Display trace
This will display the database table triggered while you are executing in Session 2.
Hope am able to explain you....Have a try and let me know incase of any issues..

How do I read this "standard" table in my Function Module?

I have a remote-enable Function Module (RFC). I am receiving two tables as part of the parameters. Table "A" is header information, and Table "B" is detail information. So for every 1 "A" header record, I may have 1 to many "B" detail records. I have a field we'll call "vendor_number" that is the common link between the two tables.
Here's what I want to do: I want to loop through table "A", and for each record, I want to do a READ on table "B", using the "ref_doc_no" from "A" as my key, to get the position of the first matching record. I hold onto the value of the table index and then start looping table "B", adding 1 to the saved table index each time to process all of the detail records.
Here's the problem: This worked great as an ABAP program. I had my "B" table declared with "ref_doc_no" as a non-unique key. But when I ported my code over to the RFC, it told me that the RFC could only deal with standard tables. I had to remove the "ref_doc_no" key declaration. So now when I try to activate, I get an error similar to this:
The declaration for the key field "another_field" is incomplete; however, "another_field" is contained in the key of table "B" and must be filled.
I don't understand that. I've not declared any keys for table "B". I don't understand why it's thinking I need to populate "another_field" (I don't even know what the value would be). My code to read the table (i.e. the line getting the error) is this:
Priming read on table (sets the initial sy-tabix index value)
    READ TABLE it_incoming_invoice_line_item "table 'B'
      WITH TABLE KEY ref_doc_no =
                     wa_incoming_invoice_header-ref_doc_no
                INTO wa_incoming_invoice_line_item.
Is it possible for me to do some sort of direct read on a table in an RFC? The only alternative I can think of would be to have to loop through table "B" until I find the first occurrence of a match. Is that what I need to do?
Thanks everyone. Points, as always, awarded for helpful answers.

Dave,
1. You can fire SELECTS in an RFC as well, but in your case the data exists in SYSTEM A and the RFC is in System B, so you can't do that. You can fire SELECTS on tables in the same system.
2. Quick example of two table loops - EKKO (HEADER) EKPO (ITEM).
LOOP AT EKKO.
LOOP AT EKPO WHERE EBELN = EKKO-EBELN.
ENDLOOP.
ENDLOOP.
I hope this is clear now.
Regards,
Ravi

Unable to release function module

Working on t001 table , made a structure and use it in function module .
importing and export and define the structure in that , save check and activate it.
sucessfully activated.
then my problem started.
After successful activation, Go to the attributes tab. Go to Function module->Release->Release.
but the last release is hide there.
Pls enhance what are the problem or how can i release the function module.
regards
kamal.

Hi
A function module can be released once
Max

How can I debug a Function Module used by smartforms

Hello everyone,
i have a problem with the function module /1BCDWB/SF00000040.
It's a module executed from a smartforms form. I need to debug this
function module while printing an invoice. While printing it should jump
to the place of the function module.
Would be grateful if someone could help me.
Best regards
F. Hoppe

This is exactly what i have done last time.
The problem is that the breakpoint does not stay at the same place
when i activate it in the module itself.
Isn't there a transaction you can put breakpoints specific to a FM?

Error while creating a extractor based on Functional Module

Hi,
I am building an extactor based on afunction module.I created a DS and created a structure in Se11.When i am trying to put the extract structure in the Tables tab of the function module it gives me an error saying Tables parameters are obselete and doesnt allow me to activate or go back and front to other tabs.Can anyone please tell me what might be the reason?
Thanks,

Hi,
Just try to reactivate the structure once again. And when you open the function module, if the problem still persists just try to press Return key several times. The message you are getting is just a warning message.
PS: I am not sure whether this is the correct way, but i personally resolved this by pressing the ENTER key 4 or 5 times. So just give a try.
Regards
Sunil

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Function Module to activate objcts

Similar Messages

Maybe you are looking for