Function module to do lb11 transaction

Dear Experts,
Please help me to find out function module to do the lb11 transaction.

Alas, there are not much BAPI on WM (only read BAPI naming BAPI_WHSE*) so either
Look for IDOC, e.g. WMTCID03 (or 01, 02 for old versions)
Use batch-input
Look for non-released FM as L_TO_CREATE_TR, but at your own risk, no documentation, so perform some where-used on the FM in standard program AND use scn search tool
Regards,
Raymond

Similar Messages

  • Need BAPI or function module to do FMZ1 transaction for funds commitment.

    Hi,
        I need a BAPI or function module to do FMZ1 transaction, please advise.
    Regards
    Fellow ABAPer.

    I think I found it.
    If anyone is searching for it too, we will use these one:
    CO_ZA_AVAIL_CHK_ORDER_MULTI

  • Need a BAPI or function module to do FMZ1 transaction for funds commitment.

    Hi,
        I need a BAPI or function module to do FMZ1 transaction, please advise.
    Regards
    Fellow ABAPer.

    I think I found it.
    If anyone is searching for it too, we will use these one:
    CO_ZA_AVAIL_CHK_ORDER_MULTI

  • Function modules to update ME01 transaction

    Hi,
    Can I get the list of Function modules to update ME01 transaction..
    Thnx in advance,
    Shivaa

    Hi shiva,
          Try this funtion module ,
    ME_UPDATE_SOURCES_OF_SUPPLY        Update source list
    ME_UPDATE_SOURCES_OF_SUPPLY_BA Update source list records in background during generation
    I hope,it will help you
    <=<< Sharing Knowledge is a way to Innovative >>=>
    By,
      Yoga

  • Function module for Article creation (transaction MM41)

    Hello,
    I have been trying to create an article which is normally done using transaction MM41.
    I am trying to use BAPI_MATERIAL_SAVEDATA to do this, but since article creation is different  from regular material creation, there are fields that are not available, for example article category (MARA-ATTYP).
    Another problem encountered with the BAPI is that the industry section is a required input.  For MM41 it is not a required field.
    Therefore, is there an available function module aside from the BAPI mentioned above that can perform article creation?
    If the BAPI above is sufficient, how can I properly populate the necessary fields?
    Additional information:  requirement is developed in 4.6c.
    provide the code I've been working on if asked.
    Thanks in advance!

    Hello Harsh
    To extend the article to another distribution channel you need to populate the salesdata/salesdatax structures of the BAPI.  For example:
      CLEAR wa_salesdata.
      wa_salesdata-material            = material.
      wa_salesdata-sales_org           = salesorg.
      wa_salesdata-distr_chan          = dstchan.
      wa_salesdata-item_cat            = itemcat.
      wa_salesdata-matl_stats          = '1'.
      APPEND wa_salesdata TO i_salesdata.
      CLEAR wa_salesdatax.
      wa_salesdata-material            = material.
      wa_salesdata-sales_org           = salesorg.
      wa_salesdata-distr_chan          = dstchan.
      wa_salesdatax-item_cat            = 'X'.
      wa_salesdatax-matl_stats          = 'X'.
      APPEND wa_salesdatax TO i_salesdatax.
    I believe the important data you need to have are material, sales org, and distribution channel.
    Hope this helps.

  • Function Module used in SE09 Transaction.

    Hi,
    In SE09 Transaction, When we click on the object included in the work bench Transport request, Object will be opened by the respective Transaction. For eg, If we click on a program included in the Transport request, Program wll be opened in SE38 Transaction. TR_JUMP_TOOL_TO_OBJECT function module is involved behind this functionality
    Similary when we click on the IMG activity included in the Customising Transport Request, Respective IMG activity will be opened. can you please let me know the Function module or Logic behind this functionality.
    Thanks,
    Madhuri.

    Please remember to award points for helpful answers and mark your post as solved when answered completely.  Thanks.
    Regards,
    Rich Heilman

  • Function module for f-64 transaction

    Hi,
            Is there any function module is there for f-64 transaction please let me know.
    regards,
    Naveen

    hi Naveen,
    you can park documents with POSTING_INTERFACE_DOCUMENT.
    ec

  • Function Modules called during a Transaction

    Hi Experts,
           Is there a way to find out the Function Modules/BAPI's called when I run a Transaction/Program (during runtime).
          Let's say I run a trasaction ME22N and Press Save button. The transaction saves the data. Now I would like to know what are all the FunctionModules the transaction invoked during Save action. I went through tracing ST01, could not find it as helpful.
    Thanks in advance.

    Read the SAP help for details, but briefly.
    Tx Se30.
    Create a new variant.  Check "Within and Below", "RFC, Update", "Particular Units" in tab "Program Parts".  Choose "none" aggregation in tab "Duration/type".
    Save the variant.  With that variant selected enter the tx you want to trace - e.g. ME22N, and click on Execute.
    Get to the point in the tx just before you press Save.  Choose menu system->utilities->runtime analysis->switch on.
    Press save.
    When the system comes back to you, choose menu system->utilities->runtime analysis->switch off, and leave the transaction.
    In the screen section "Performance Data File", click on "Evaluate".  Go to menu Goto->Hit List->Standard (or press F5)
    All the function modules hit (and lots of other information) will be displayed.
    matt

  • Is there any Function Module will give the Transactional data of a cube?

    Hi Experts,
    I have one Infocube Zco3_BILT , I need to write a routine (BADI Program)on top of this info cube  to fetch a characterstic value in the infocube.
    F table  & Etable wont give any characterstic values.
    Is There any SAP provided FM to give characterstic values of the Infocube.
    Thanks in advance.
    Regards
    Mohan

    Hi Mohan,
    this is correct since the values are stored in different tables (fact, dimension etc) due to star sheme modelling. As far as I know there is no standard function module for this issue.
    However ABAP report RSDD_SHOW_ICUBE might help. This is the report for transaction listcube, all relevant data is build up, there you should find all necessary steps and standard reports/modules to fetch the required characteristic value. Although I do not know the exact requirement you will probably have to work with SID values.
    Perhaps this will help resolving your issue.
    Best Regards,
    Marcel

  • Function Modules or BAPI for CK91N transaction Please

    Hi,
    To upate CK91N transaction , Is there any function module or BAPI exist?
    Thanks,
    Krishna

    Hi
        go to se80 ->package->type CKMLMV as package name.
    This package has multiple programs and function modules which update the transaction. You can choose from them according to your requirement.
    Hope this helps!
    Viquar Iqbal

  • I need to know thelist of bapi's and function modules used for transaction

    I need to know thelist of bapi's and function modules used for transaction in order to use these FM or BAPI in reading some fields of equipment master and functional loocation.Can any one suggest me some methods...or do i need to write  a report for the same.

    Steps to find the BAPI/function modules used in a transaction
    1) Find the package of the transaction thro' SE93.
    For example the package for the transaction VA03 is VA
    2) Go to Se80, key-in the package (say VA)
    3) You can see the function modules under the folder finction group and
    you can see the BAPI's under the folder Business Engineering-> Business Objects-> double click on the released methods of the Business Objects

  • Help in Creation of a Function Module.

    Hi Abapers,
                    I am new to ABAP and hardly have knowledge abt it. I need to create a Function Module which is of the type RFC. Pls provide me information and steps to create the same.
    Many thanks in Advance.

    Hi Pooja,
    Please follow the below steps to create a function module :
    1. Goto Transaction code : SE37.
    2. Create a Function Group first.
       a) From the Menu Bar Choose Goto -> Function groups ->  Create group.
       b) Specify the function group name and a short text.
       c) Choose Save.
    When you create a new function group, the system automatically creates a main program containing two includes. Like any other programs and includes, you can display them in the Repository Browser.
    3. Now create a Function Module.
    4. Enter the function's name in the field Function module.
    5. Choose Create.
    6. In the Enter function group dialog box, enter the function group to which you want to assign the function module.
    7. In The Attributes Tab select Remote Enabled Module (since you want a RFC function module ).
    8. Give the Import and Export parameters and exceptions(if any).
    9. Write the functioning part of the fuction module in the Source code tab.
    10. Save and Activate your function Module.
    Now go ahead and use your function module where ever you want.
    Hope it helps.
    Reward if helpful.
    Regards
    Hemant Khemani

  • How do I "see" a check function module in the debugger?

    I am correctly starting a custom workflow based on an event raised by standard SAP code in transaciton QE51N.
    I have to write a check function module to interrogate the event and start/not start
    the workflow because the same event is raised by SAP code in transaction QA02, and I have to be sure to start the workflow only if the event is raised in QE51N, not QA02.  (I also have to check some other properties of the QALS row for the inspection lot.)
    I know how to code the check function module, but if I need to debug it, how do I "set-up" for seeing the check function module in the debugger?
    I'm sure this is an obvious question and that I'm missing something simple.
    So thanks in advance for the answer.
    djh

    Dear DJH,
    Put a break-point in the function module and process the transaction. It will stop at runtime.
    Hope this will help.
    Regards,
    Naveen.

  • Help in enhancing CRM logon function module

    Hello all,
    We have a situation where in the past we have allowed the creation of multiple Business Partners sharing the same e-mail address. We are about to close this loophole but we have this as a master data issue for some existing Customers/Business PArtners.
    Currently, our CRM Webshop only uses e-mail address and password for login verification (not using Business Partner/Customer number).
    We would like to enhance the webshop logon to include customer number as well ie. We want to determine which customer number associated with the ambiguous e-mail address is used. I have attempted to identify which function module is involved by inserting an endless WHILE loop into the following , but none of them seems to be called :
    CRM_ICSS_USER_LOGIN
    CRM_ISA_IUSER_LOGINr
    CRM_ISAI_BP_LOGIN_BPARTNER_GET
    CRM_ISA_BP_LOGIN_CHECK
    CRM_ISA_LOGIN_R3USER_CHECK
    CRM_ISA_IUSER_LOGIN
    CRM_ISA_LOGIN_CHECK
    CRM_ISAI_BP_LOGIN_BPARTNER_GET
    In addition I notice the function SUSR_CHECK_LOGON_DATA can not be enhanced as it's a Basis FM.
    I have attempted to look up documentation in SAP Help and not much joy. Can anyone tell me whether I'm barking up the wrong tree and this needs to be addressed by a kernel level function or recommend another place in the standard code ?
    Regards,
    Gabriel

    Hi Pooja,
    Please follow the below steps to create a function module :
    1. Goto Transaction code : SE37.
    2. Create a Function Group first.
       a) From the Menu Bar Choose Goto -> Function groups ->  Create group.
       b) Specify the function group name and a short text.
       c) Choose Save.
    When you create a new function group, the system automatically creates a main program containing two includes. Like any other programs and includes, you can display them in the Repository Browser.
    3. Now create a Function Module.
    4. Enter the function's name in the field Function module.
    5. Choose Create.
    6. In the Enter function group dialog box, enter the function group to which you want to assign the function module.
    7. In The Attributes Tab select Remote Enabled Module (since you want a RFC function module ).
    8. Give the Import and Export parameters and exceptions(if any).
    9. Write the functioning part of the fuction module in the Source code tab.
    10. Save and Activate your function Module.
    Now go ahead and use your function module where ever you want.
    Hope it helps.
    Reward if helpful.
    Regards
    Hemant Khemani

  • Function Module For F-04

    Hi
    Is there any function module for F-04 transaction.
    Please help with answers.

    Hi,
    Check the following Exits
    SAPLF051                     Workflow for FI (pre-capture, release for payment)
    RFKORIEX                    Automatic correspondence
    RFEPOS00                   Line item display: Checking of selection conditions
    RFAVIS01                  Customer Exit for Changing Payment Advice Segment Text
    FEDI0001                    Function Exits for EDI in FI
    FARC0002                  Additional Checks for Archiving MM Vendor Master Data
    F180A001                  Balance Sheet Adjustment
    reward if useful
    regards,
    Anji

Maybe you are looking for