Function module to read data from a SPO

Hi guys,
Inside a transformation a have a rule, ABAP routine type, in wich I need to read data from a SPO (semantically partitioned object). Is there an ABAP function module or Class that allows to read data from a SPO?
The SPO from wich I need to read the data is DSO based.
Thanks in advance.
David.

Hi David,
The normal procedure is using Function Module RSDRI_INFOPROV_READ. However, according to the documentation it only works for DSOs, InfoCubes and MultiProviders.
Could you access as a work-around a MultiProvider? Or use any logic to first determine which PartProvider of the SPO-based DSO or InfoCube is required and then use the Function Module to read the data?
Best regards,
Sander

Similar Messages

Function Module to Read data from ESLH & ESLL

Hi All,
Presently i am working on the Service Purchase Order
I have to get the data from the Service Master tax conditions which is storing in ESLH & ESLL database tables.
So is there any Function Module to get the data.
regards:
Sridhar J

Hi David,
The normal procedure is using Function Module RSDRI_INFOPROV_READ. However, according to the documentation it only works for DSOs, InfoCubes and MultiProviders.
Could you access as a work-around a MultiProvider? Or use any logic to first determine which PartProvider of the SPO-based DSO or InfoCube is required and then use the Function Module to read the data?
Best regards,
Sander

Any standard function module to read data from a cube

Hi,
I want to read data from a cube say XYZ, into an internal table. Is there any standard function module to do this? If so can anyone plz tell me what change should i make in the function module for my requirement.
Regards
BW Fresher.

Hi R,
Try function module 'RSDRI_INFOPROV_READ'
ABAP Report RSDRI_INFOPROV_READ_DEMO contains an example of how the function module can be used.
Udo

Function module to Read DATA from HRP1001

Hi All ,
    I am fetching sobid by writing the following Select Query,
<b>      SELECT sobid FROM hrp1001 INTO TABLE it_sobid
         WHERE otype = c_objtyp_o
         AND   objid = pr_ounit
         AND   plvar = c_plnvrsn
         AND   rsign = c_relshp_b
         AND   relat = c_relat_963
         AND   sclas = c_objtyp_s.</b>
is there any Function module to fetch the data from HRP1001 using all the above selection Criteria.
Thanx,
Girish.

RH_READ_INFTY_1001
Raja

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

Function module to read data form customer tabels

hi,
can anyone suggest function module to read data form customer tabels?
Please give me reply.
TKS,
Dharani.P

Hi,
this thread is hvaing your answer.
Is there a Function module to get customer hierarchy data?
Regards,
Pravin

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

Function module to get data from VARI table

Hi All,
thank you for viewing this thread. can anyone help me out in finding a function module which can get data from the VARI table?
thank you

Hi,
FMs you will require are:
RS_VARIANT_CONTENTS - Values of a variant returned in a table
RS_VARIANT_EXISTS - Checks whether a variant exists for a report
RS_VARIANT_TEXT - Returns short description of variant
RS_VARIANT_VALUES_TECH_DATA - Reads variant parameters of a report
Do search on them for complete details.
Cheers.

BAPI / Function Modules to read data in BPS

Hi,
I need to read ODS/infocubes data in a BPS application. Does anyone knows of any BAPIs or Function Modules to do that?
Thanks,
CK

Hallo CK
if you want to get data form ODs, just make a select from the tablle /bic/a(tec_name)00.
From cube you can use the API_SEMBPS_GETDATA for getting data from Planning Area.
Mike

Function module to fetch data from table

Hi All,
I want to get the entries from the table 'arfcsstate' for a particular date. Is there a function module to get the same.
Thanks in advance.
Regards,
Anju

Hi,
You can use select query
Select * from arfcsstate into <Internal table name>
where date <give ur condition.>
if date is in selection screen than write
date in s_date.
Thanx
Ankur Sharma

Function module to change Date from YYYYMMDD to DD.MM.YYYY

Hi
PLease tell me the function module that will convert date from YYYYMMDD to DD.MM.YYYY
Thanks

Hi,
data lv_date1 type sy-datum.
data lv_date2(12).
lv_date1 = '20070123'.
concatenate lv_date16(2) lv_date14(2) lv_date1+0(4) into lv_date2
separated by '.' .
is what you require to do;
now lv_date2 = 23.01.2007.
Also look for conversion routine "CONVERSION_EXIT_PDATE_OUTPUT"
EG: call function CONVERSION_EXIT_PDATE_OUTPUT
exporting input = lv_date1
importing output = lv_date2.
Thanks,
Anitha

Function module to import data from memory

Hi,
I am using the function module 'LIST_FROM_MEMORY' to import data and the LISTOBJECT contains values in raw format.How to convert this to char format?I dont want to use 'DISPLAY_LIST' as I want the values of the parameter 'LISTOBJECT' to be passed to block alv in the calling program.
Please suggest me as to how to do the conversion?
Thanks in advance
Vasudha

Use Function Module: LIST_TO_ASCI
Converts the specified list (LIST_INDEX) or the provided list
(LISTOBJECT) to ASCI.
Here, the purely text part of the list is copied line by line to the
prepared internal table (LISTASCI) without any attributes (color, icon,
symbol, ...). There is no line break in this case, i.e. if the internal
table line is not long enough, the list line is truncated.
DATA LISTTAB LIKE ABAPLIST OCCURS 1.
DATA: BEGIN OF ASCITAB OCCURS 1,
       LINE(256),
       END OF ASCITAB.
CALL FUNCTION 'LIST_TO_ASCI'
      TABLES LISTOBJECT = LISTTAB
             LISTASCI   = ASCITAB.
The provided list (LISTOBJECT) is taken into account only if the
parameter LIST_INDEX = -1 (default). Otherwise, it is ignored.
Hope this helps.
Regards
Vinayak

Any Function module to get data from ESS leave form

Hi Friends,
I have modified std workflow ws12300111.with 2 levels.
I want to send mail to HOD. In that mail i have to mention details like start date , end date,leave type which is entered into ESS form. I want to retrive that data.
Is there any Fm is available? which wil give ESS data as output.
Plz let m know.
Regards,
Shital

Have you thought about creating attachments in the WF so you can read the form and get data from it.
There's plenty of standard WF examples around of attaching objects to WF's.
Since the ESS action will initiate the relevant workflows you should easily be able to save this data.
BTW If your other question on this WF was answered please close that thread.
Cheers
Jimbo

Function module to fetch data from table SETLEAVES

Hi All,
We have a requirement to fetch the data from table SETLEAVES based on the setclass,subclass and group. As the table holds hierarchical data, Please let me know a FM which fetches all the hierarchical data from the table SETLEAVES.
Regards
Shiva

Try:
    exporting
      e_class                     = '0102'
      e_setid                     = setid
      e_kokrs                     = my_kokrs
      e_mandt                     = sy-mandt
      e_master_data               = 'XXX'
      e_structure                 = 'X X0200'
      e_replace_class             = space
      e_replace_unit              = space
      e_suffix                    = space
      e_old_line_level            = 1 "l_ol_level
    tables
      t_nodes                     = it_ceg_nodes
      t_values                    = it_ceg_values
    changing
      c_info                      = c_info
      c_overwrite                 = c_overwrite
    exceptions
      no_controlling_area         = 1
      no_chart_of_account         = 2
      different_controlling_areas = 3
      different_chart_of_accounts = 4
      set_not_found               = 5
      illegal_field_replacement   = 6
      illegal_table_replacement   = 7
      fm_raise                    = 8
      convert_error               = 9
      no_overwrite_standard_hier = 10
      no_bukrs_for_kokrs          = 11
      others                      = 12.
Rob

How to read data from an internal table into a real table?

Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
    CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
       EXPORTING
         i_infoprovider           = s_cubename
         i_query                  = query_name
        i_t_parameter            = query_string_tab
       IMPORTING
         e_cell_data              = t_cell_data
         e_axis_data              = t_axis_data
         e_axis_info              = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.

Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O

Function module to read data from a SPO

Similar Messages

Maybe you are looking for