Any standard function module to read data from a cube

Hi,
I want to read data from a cube say XYZ, into an internal table. Is there any standard function module to do this? If so can anyone plz tell me what change should i make in the function module for my requirement.
Regards
BW Fresher.

Hi R,
Try function module 'RSDRI_INFOPROV_READ'
ABAP Report RSDRI_INFOPROV_READ_DEMO contains an example of how the function module can be used.
Udo

Similar Messages

Function module to read data from a SPO

Hi guys,
Inside a transformation a have a rule, ABAP routine type, in wich I need to read data from a SPO (semantically partitioned object). Is there an ABAP function module or Class that allows to read data from a SPO?
The SPO from wich I need to read the data is DSO based.
Thanks in advance.
David.

Hi David,
The normal procedure is using Function Module RSDRI_INFOPROV_READ. However, according to the documentation it only works for DSOs, InfoCubes and MultiProviders.
Could you access as a work-around a MultiProvider? Or use any logic to first determine which PartProvider of the SPO-based DSO or InfoCube is required and then use the Function Module to read the data?
Best regards,
Sander

Function Module to Read data from ESLH & ESLL

Hi All,
Presently i am working on the Service Purchase Order
I have to get the data from the Service Master tax conditions which is storing in ESLH & ESLL database tables.
So is there any Function Module to get the data.
regards:
Sridhar J

Hi David,
The normal procedure is using Function Module RSDRI_INFOPROV_READ. However, according to the documentation it only works for DSOs, InfoCubes and MultiProviders.
Could you access as a work-around a MultiProvider? Or use any logic to first determine which PartProvider of the SPO-based DSO or InfoCube is required and then use the Function Module to read the data?
Best regards,
Sander

Function module to Read DATA from HRP1001

Hi All ,
    I am fetching sobid by writing the following Select Query,
<b>      SELECT sobid FROM hrp1001 INTO TABLE it_sobid
         WHERE otype = c_objtyp_o
         AND   objid = pr_ounit
         AND   plvar = c_plnvrsn
         AND   rsign = c_relshp_b
         AND   relat = c_relat_963
         AND   sclas = c_objtyp_s.</b>
is there any Function module to fetch the data from HRP1001 using all the above selection Criteria.
Thanx,
Girish.

RH_READ_INFTY_1001
Raja

Is there standard function module to read "open office" in SAP

Hi All,
Is there any standard function module to read open office document from SAP.
Please confirm.
Thanks and best regards
Rajeev Chhabra

Hi all!
I have a similar problem. I need create a formatted spread sheet managed open office. The work sheet must be formatted.
I do not find the function module for doing this.
Do yo have any idea? The only thing I have found is the functionallity included in program BCALV_TEST_GRID.
Also I will need a function to upload the file to fill a table control.
Thanks in advance.
Cristina.

BDC program or standard function module to change data in PFCG TCode.

Gurus,
I have programatically change the validity date of SAP security role (TCode PFCG). Are there any standard function module available for this ? If not then does PFCG supports update vida BDC programming ?
Regards,
Rajesh.

Cross-posting. Thread locked.
Please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
PS: Please clean up / follow up on all your hundreds of unresolved questions.

Is there any RFC function module to read domain fixed value

Hi,
Is there any RFC function module to read domain fixed value from remote system in basis layer?
As we cannot simply wrap DD_DOMVALUES_GET with a new RFC module,because remote system will not install our component, our wrap function module is not there.
We may need a RFC fm from basis layer.

HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

Function module to read data form customer tabels

hi,
can anyone suggest function module to read data form customer tabels?
Please give me reply.
TKS,
Dharani.P

Hi,
this thread is hvaing your answer.
Is there a Function module to get customer hierarchy data?
Regards,
Pravin

Lists of Standard Function Modules to Download data into Excellsheet format

Dear Guru,
i want to know what are the Lists of Standard Function Modules to Upload data in to Excellsheet format other than WS_DOWNLOAD or GUI_DOWNLOAD.
Thanks & regards
SAifur Rahaman

Hi,
Check this out,
Download & upload of an excel file

Any Function module to get data from ESS leave form

Hi Friends,
I have modified std workflow ws12300111.with 2 levels.
I want to send mail to HOD. In that mail i have to mention details like start date , end date,leave type which is entered into ESS form. I want to retrive that data.
Is there any Fm is available? which wil give ESS data as output.
Plz let m know.
Regards,
Shital

Have you thought about creating attachments in the WF so you can read the form and get data from it.
There's plenty of standard WF examples around of attaching objects to WF's.
Since the ESS action will initiate the relevant workflows you should easily be able to save this data.
BTW If your other question on this WF was answered please close that thread.
Cheers
Jimbo

BAPI / Function Modules to read data in BPS

Hi,
I need to read ODS/infocubes data in a BPS application. Does anyone knows of any BAPIs or Function Modules to do that?
Thanks,
CK

Hallo CK
if you want to get data form ODs, just make a select from the tablle /bic/a(tec_name)00.
From cube you can use the API_SEMBPS_GETDATA for getting data from Planning Area.
Mike

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

Function module to get data from VARI table

Hi All,
thank you for viewing this thread. can anyone help me out in finding a function module which can get data from the VARI table?
thank you

Hi,
FMs you will require are:
RS_VARIANT_CONTENTS - Values of a variant returned in a table
RS_VARIANT_EXISTS - Checks whether a variant exists for a report
RS_VARIANT_TEXT - Returns short description of variant
RS_VARIANT_VALUES_TECH_DATA - Reads variant parameters of a report
Do search on them for complete details.
Cheers.

Need standard Function Module for Get price from KONP

Hi All,
I need to code for the following logic
1) Select access sequence code from T685 (field KOZGF)
2) Using this code get an access sequence tables from table T682I(field KOTABNR). There is a number in this field which is a table name if to add letter 'A' before it. This table name is a table where you can find condition records. Every condition table has got field 'KNUMH' which is a reference to condition rate table.
3) Select condition rate from table KONP (field KBETR)
4) Select scale rates if you are using them from table KONM (field KBETR).
Just want to ensure, if there is any standard FM which can help in above logic.I got a FM 'SD_COND_ACCESS'. But not sure, how it can help me?
Thanks in advance.

Thanks Anji for your quick reply.
I do have Access Sequence with me, it is Z011. here i am writing more details, I do have material number.Here article means Materail number.
o     Determine the merchandise category for the article in the list from MARA-MATKL
o     Determine the department for the article from first 3 characters of MARA-PRDHA
o     Determine the vendor for the article from EINA-LIFNR where EINA-MATNR = article in list and EINA-RELIF = X
o     Now use the access sequence Z011 (table T682I) to determine the A tables and sequence in which in these table must be read for determining the condition records.
o     Use table T682Z to determine which fields must be used to read the A tables above (in T682I).
o     The A tables must be read using condition types Z006 (margin) and Z007 (discount) where the Order Book effective date is between the valid-from and valid-to dates in the A- table, and in the sequence according to table T682I. When a condition record is found, the program must stop reading the subsequent tables, and determine the discount or margin from table KONP-KBETR, where KONP-KNUMH = A table-KNUMH.
     If the condition type is Z006, KONP-KBETR is positive. For condition type Z007, KONP-KBETR is negative.
     Divide KONP-KBETR by 10 to give KBETRX. Retain sign in KBETRX.
     Calculate the discounted / price with margin as follows:
(1 + (KBETRX/100)) * wholesale price.
Is it possible to get above logic by standard FM.
Message was edited by:
        Vipin Nagpal

Any standard function module to read data from a cube

Similar Messages

Maybe you are looking for