Function name in Logfile

Hi,
In the logfile, it always shows the name under which it is fetching data for example:
papini:BC Profile Option is SET.
-This concurrent request is not being rescheduled
Current system time is 03-JUL-2009 15:52:17
Reading AA Function ...
Reading Function Parameters ...
Reading Function Transactions ...
Reading Function Segment Rule Pairings ...
Reading AA Rules ...
Reading Lookup Set Names ...
Reading Rule Parameters ...
Entering paaacp()
Current system time is 03-JUL-2009 15:52:18
Leaving paaacp()
Current system time is 03-JUL-2009 15:52:18
Entering paaasp()
Current system time is 03-JUL-2009 15:52:18
Leaving paaasp()
Current system time is 03-JUL-2009 15:52:18
Entering paaamc()
Current system time is 03-JUL-2009 15:52:18
Leaving paaamc()
Current system time is 03-JUL-2009 15:52:18
the function --> paaacp, paaasp, paaamc..... so on. Could anyone please help me.. which it is notifying and way to find out the description of this function.
It will very helpful for me.
Thanks,
Lavanya

Hi Lavanya,
These functions are very internal and is written in Pro*C. We don't need to understand what it is doing. But on a high level, below are the definitions of them:
paaamc - Autoinvoice Allocate Main Cache structure
This function allocates the memory to return the result value of the auto accounting.
paaacp - Autoinvoice Assign Control Parameters
This function assigns value to each member of paafcp structure.
paaasp.lc - Autoinvoice Assign System Parameters
This function assigns user-tunable key flexfield editing system processing options.
Thanks,
Sathish Raju
www.projectsaccounting.com

Similar Messages

Custom Authentication in 4.2 will not save Authentication Function Name

Upgrade from 4.0 to 4.2.
When creating a new Custom Authentication the Authentication Function Name will not save in the Apex Create\Edit screen. After the Apply Changes button is clicked and the authentication scheme reopened - the Authentication Function Name will be cleared. If PL/SQL code was populated in the source field - it will still be present.
Looking in the WWV_FLOW_AUTHENTICATIONS table - a new record is created but attribute_03 (this seems be where the Function Name is stored) attribute_05 and attribute_15 are null. The PL/SQL entered in Apex is there in the PLSQL_CODE field.
All preexisting Custom Authentications that existed - there fields are populated and still work correctly. However, if you edit the Authentication Scheme in Apex it nulls out those fields in the WWV_FLOW_AUTHENTICATIONS table and the scheme no longer works.
I can manually set attribute_03 to my function name, and attribute_05 to 'N' in the WWV_FLOW_AUTHENTICATIONS table and the Authentication scheme will work as long as you never try to edit it and save inside APEX( these fields are nulled out if you do this).
Also - Authorizations schemes are behaving similarly.
Checking the WWV_FLOW_SECURITY_SCHEMES table - attribute_01 is always NULL.
No error is ever given inside the Apex designer.
Any ideas how I can debug this?
10.2.0.4.0 DB.
Edited by: Bill14 on Nov 27, 2012 7:32 AM

That's what happens when you don't pay attention to what you are typing (me that is). Edited original post.
DB version is 10.2.0.4.0 (11.5.10 is our ebiz version)
The PL_SQL column in WWV_FLOW_AUTHENTICATIONS is a CLOB. Looking at a a data view in Toad it abbreviates the field to say(HUGECLOB).
This does not occur on apex.oracle.com and all of our 4.0 installs still behave as expected. The DBA said that he checked the install logs and did not see anyting out of order. I've never done an APEX install, is there a specific log file (or naming convention for a logfile) that I can tell him to look in or look for?

User Function Name wrong resultset in Oracle Apps Query

Hi,
I am using the below query to extarct the user function names alonng with responsilibity .But doing so i am getting a User Function Name for eg 'Cross Validation Rules' under Order Management User.But thats wrong.Cross validation rules should exists in Receivables,GL and Payables.
select distinct frv.menu_id, frv.responsibility_id, frv.responsibility_name, fff.function_name, ffft.user_function_name
from
fnd_responsibility_vl frv,
fnd_responsibility frp,
fnd_form_functions fff,
fnd_form_functions_tl ffft,
fnd_resp_functions resp,
fnd_menu_entries mnu,
fnd_menus fmn
where
fff.function_id = ffft.function_id
and mnu.menu_id=frp.menu_id
and mnu.menu_id=fmn.menu_id
and frv.responsibility_id=resp.responsibility_id
and mnu.function_id=ffft.function_id
and resp.rule_type='M'
and frv.menu_id in (select me.menu_id
from fnd_menu_entries me
start with me.function_id = fff.function_id
connect by prior me.menu_id = me.sub_menu_id )
and (frv.responsibility_name like '%Order%')
order by 1
Kindly any help will be helpful for me

What is your application release?
I am using the below query to extarct the user function names alonng with responsilibity .But doing so i am getting a User Function Name for eg 'Cross Validation Rules' under Order Management User.But thats wrong.Cross validation rules should exists in Receivables,GL and Payables.Please try the queries in these docs.
Script To Extract Submenu And Function Information About A Menu [ID 458701.1]
HOW TO GENERATE MENU TREE FOR A MENU ATTACHED TO A RESPONSIBILITY IN ORACLE APPLICATIONS 11i ? [ID 312014.1]
Thanks,
Hussein

Print message in function name not present

I have to execute a function from a table . It is like
cursor c1 is select fun_name from config_Table loop
v_format_sql := 'select '||c1.fun_name|| ' from dual ';
execute immediate v_format_sql into format_count;
end loop;
But if the function in the config_Table is not there or the function name is wrong it exits from the program
Please help me to print the text "function name wrong" if the function name does not exists in the database.

Hi,
You can do it like this:
SELECT COUNT(*) INTO v_func_count FROM user_objects
WHERE OBJECT_TYPE='FUNCTION' AND STATUS='VALID'
AND object_name = TO_UPPER(c1.fun_name);
IF v_func_count = 0 THEN
-- Function does not exist or not in valid state.
END IF;
Regards

I'm getting a "The procedure entrypoint ssSr192x__ssSr192drvssSrReset could no be located in the dynamic link library ssSR192x.dll" because the ActiveX instrument driver DLL doesn't have the function names in the export table.

Is there a way for my CVI project to reference the functions in the ActiveX without including the instrument .fp in the project?
Thanks much.
I'm confused on how CVI uses ActiveX components and hope someone can help.
I'm using an ActiveX driver from an instrument manufacturer and I use the .TLB to generate a .fp, .c, and .h file. If I register the .dll and load the .fp in my project, all is well. Unfortunately in my application the functions to control this instrument are in another DLL whose .lib I include in my CVI projec
t. Running the CVI project this way gives me "The procedure entrypoint ssSr192x__ssSr192drvssSrReset could no be located in the dynamic link library ssSR192x.dll" because the instrument function names aren't in the export table in the instrument DLL. Non-ActiveX DLLs have the export tables so everything works for them.
Program structure with non-ActiveX DLLs:
CVI project (.exe with common.lib in project list)
|
V
Common DLL (MeasDMM() with hp1234.lib in project list)
|
V
Instrument DLL (hp1234_measure())
Since I get a .c and .h file from the .TLB, I've tried recompiling the DLL (.dll and .lib produced) and the functions seem to work, but I get "Class not registered" errors unless I play games with the registry so I'm obviously violating numerous Microsoft rules!
Is there a way for my CVI project to reference the functions in the ActiveX without including the instrument .fp in the project? Thanks much.
Jeff Fish
Advisory Test Engineer
StorageTek

Hello Jeff,
Where were your getting the .lib file for the ActiveX DLL? Did you use the "hp1234"
ActiveX driver generated by the "Create ActiveX Automation Controller" CVI Tool to build a static library? If you open an include file and choose Options >> Generate DLL..., it will generate source code or a static import library to load the specified DLL and load functions specified in the include file (this only works if the functions are exported from a DLL). However, in the case of our ActiveX Automation Controllers, ActiveX calls are used to access a DLL. This means that you do not need an import library. You should be able to open the "hp1234" source file and click Options >> Create Object File. Simply #include "hp1234.h" and add "hp1234.obj" to your Common DLL project;
the .fp file is not necessary. If this does not answer your questions or if you experience further difficulty, please post further details on what you are doing and the errors that are being encountered ("play games with the registry" and "recompiling 'the' DLL" are a bit vague in this case).
Jeremiah
Applications Engineer
National Instruments
http://www.ni.com/ask

What is the best method to parse a java file for function names

st="class";
while (StreamTokenizer.TT_EOF != tokenizer.nextToken ())
   if (StreamTokenizer.TT_WORD == tokenizer.ttype)
    if (tokenizer.sval.toLowerCase().equals(st.toLowerCase())){
    System.out.print (tokenizer.nextToken() + " "); //prints the class name on the console
    fileOut.print (tokenizer.sval + " "); //prints the class name to a file
}The above program searches a .java file for classes. I want to modify it so that it searches for function names as well. After several hours of figuring out various ways to do it with StreamTokenizer, I still havnt found a way. There seems to be no way to go back, i.e. no previousToken method, in StreamTokenizer.
Is it possible to do search for using StreamTokenizer, and are there easier ways of doing it?

Simple string tokenizing isn't an effective way to do this. You probably want something like ANTLR.

SSMS 2012: Import XML File to SQL Table - 'value' is not a recognized built-in function name!!??

Hi all,
I have the following xml file (books1.xml):
<bookstore>
<book>
<BookID>1</BookID>
<title>Everyday Italian</title>
<author>Giada De Laurentiis</author>
<year>2005</year>
<price>30.00</price>
</book>
<book>
<BookID>2<BookID>
<title>Harry Potter</title>
<author>J K. Rowling</author>
<year>2005</year>
<price>29.99</price>
</book>
<book>
<BookID>3<BookID>
<title>XQuery Kick Start</title>
<author>James McGovern</author>
<year>2003</year>
<price>49.99</price>
</book>
<book>
<BookID>4<BookID>
<title>Learning XML</title>
<author>Erik T. Ray</author>
<year>2003</year>
<price>39.95</price>
</book>
</bookstore>
In my Microsoft SQL Server 2012 Management Studio, I executed the following SQL Query code:
--XQuery w3schools example using books1.xml in C:\Temp folder
---SQL Query W3books Title
---9 March 2015
USE XML_XQUERY
GO
CREATE TABLE W3Books(
BookID INt Primary Key,
Title VARCHAR(30));
INSERT INTO W3Books (BookID, Title)
SELECT x.book.query('BookID'), value('.', 'INT'),
x.book.query('title'), value('.', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'C:\Temp\books1.xml',
SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('W3Books/book') AS x(book);
SELECT BookID, Title
FROM W3Books;
I got the following error messages:
Msg 195, Level 15, State 10, Line 7
'value' is not a recognized built-in function name.
Msg 156, Level 15, State 1, Line 16
Incorrect syntax near the keyword 'AS'.
I don't know why I got the error of 'value' is not a recognized built-in function name. Please kindly help and tell me what is wrong in my code and how to correct the error.
Thanks, Scott Chang
P. S.
(1) I mimicked the xml file and SQL Qeury code of Import XML File to SQL Table in
http://pratchev.blogspot.com/2008/11/import-xml-file-to-sql-table.html. The xml file and the code of this sample worked in my SSMS 2012 program.
(2) I am learning the "CAST" and "CROSS APPLY" in the Create Instances of XML Data of Microsoft MSDN - it is very abstract to me.

Hi Stan210, Thanks for your nice response.
I corrected my xml file as you pointed out.
I made some changes in some code statements of my SQLQueryW3BookTitle.sql as you instructed:
--XQuery w3schools example using books1.xml in C:\Temp folder
---SQL Query W3books Title
---10 March 2015
USE XML_XQUERY
GO
CREATE TABLE W3Books(
BookID INt Primary Key,
Title VARCHAR(30));
INSERT INTO W3Books (BookID, Title)
SELECT x.book.value('/BookID[1]', 'INT'),
x.book.value('/title[1]', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'C:\Temp\books1.xml',SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('bookstore/book') AS x(book);
SELECT BookID, Title
FROM W3Books;
I executed my revised sql and I got the following Message and Results:
Msg 515, Level 16, State 2, Line 6
Cannot insert the value NULL into column 'BookID', table 'XML_XQUERY.dbo.W3Books'; column does not allow nulls. INSERT fails.
The statement has been terminated.
(0 row(s) affected)
Results:
BookID Title
I don't know why I just got the names of columns in Results and the "Cannot insert the value NULL into column 'BookID', table 'XML_XQUERY.dbo.W3Books'; column does not allow nulls, insert fails." in Messages. Please kindly help, advise me
how to correct the errors and respond again.
Many Thanks again,
Scott Chang

How to get the current function name in java

How to get the current function name in java.
In c it is done as
printf("%s",__func__);
Thanx in advance.

j0o wrote:
System.out.println("Class Name: " + new Exception().getStackTrace()[0].getClassName() +
"/n Method Name : " + new Exception().getStackTrace()[0].getMethodName() +
"/n Line number : " + new Exception().getStackTrace()[0].getLineNumber());
I pointed the OP at this approach yesterday in one of his multi-posts. I still have not been given my Dukes!

[JS CS3] Variable Function Name

Hello everyone,
Does anyone know if you can put a variable into a function name?
Bellow is a function that I am working on to avoid using an if statement with 33 possiblilites. It does work but I get a "undefined is not an object error".
function myFunction(){
var myDoc = app.activeDocument;
var myRootXMLElement = myDoc.xmlElements.item(0);
var myData = myRootXMLElement.xmlElements.item("xyzTag");
for (b = 2; b <= 34; b++){
if(b = myData.contents){
myNewFunction = "my"+b+"VariableFunction()";
try{
eval(myNewFunction);
}catch(e){
alert(e);
Because this physically does what I intend it to do I believe this should work but I can't get past this error. Could someone please let me know if there is a way to make this error free?
Regards,
Brett

Change this line:
>if (b = myData.contents)
to this:
>if (b == myData.contents)
and it probably works. It is possible to use variables and eval() to call functions. This script works ok:
for (i = 0; i < 3; i++)
   f = 'my' + i + 'Func()'
   eval (f)
function my0Func ()
   $.writeln ('this')
function my1Func ()
   $.writeln ('that')
function my2Func ()
   $.writeln ('and the other')
Peter

How to get the function name/ID of the current page

HI,
I searched the forum and google, but it is not clear on how to get the function name of the current page.
I have 4 functions in my self service A ,B,C,D (seeded page links ) they all have to go to a page called hhhPG. Based on which function user is clicks I have to show the data in hhhPG.
so my question is how to get the function name ? I mean I need to know if user click on link A , B, C or D link and came to this page.
I found below in one forum and also there is getfunctionID in pageContext , but I do not know what to pass to getfunctionid("???") to get value.
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
Or is there a better way of know where user is coming from ? like geturl....
Please help, I need this ASAP.
Thank you.

Use below to find out how the user came into the page
FunctionSecurity funcSecurity = pageContext.getFunctionSecurity();
boolean isFunc1 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME1"));
boolean isFunc2 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME2"));
boolean isFunc3 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME3"));
boolean isFunc4 = funcSecurity.testFunction(funcSecurity.getFunction("YOUR_FUNCTION_SHORT_NAME4"));
So one of them will be true based on the function the user came in.
Write your logic based on these flags.
Regards,
Peddi.

Significance of function name property in the OAF Page

Hello, I am trying to find out how the seeded LookupPG works as i need to use the same logic in my application. In the LookupPG page, in the function name property, it's specified as 'FND_LOOKUPS_SSWA'. I tried to open the function to see what is defined in that function and it's nothing but the path of the same page is defined in the function. I tried removing the function name from the page property and it gives me error. Can anyone tell me what's the significance of this function name property in oaf page? Appreciate your advice. Thanks KK

HC,
You can add a Region of type Header and set the Text for that and add your table under the Header region.
Or you can Enter the Text attribute value for that table to get the header.
Thanks,
With regards,
Kali.
OSSI.

Variable Function Names

What I'm trying to do is add event listeners for each position up to the total of compPositions. This way, each one will have a dymanic function name. Right now, they all launch function "clicked1" but I can't figure out how to make it add numbers to the function name dynamically. Is there a different method I should be using to accomplish this goal?
Right now, compPosition = 5 so it should create 5 event listners, but I want them each to have their own function they exucute.
          var i;
          for (i = 1; i < compPositions +1; i++)
                    currentPos = "pos" + i;
                    this["pos" + i].addEventListener(MouseEvent.CLICK, clicked1)
Edit:
Actually, after thinking about it, I think this is a better approach, but I'm not sure how to pass over a variable using a click event.
            var i;
            for (i = 1; i < compPositions +1; i++)
                  var currentPos; //now it's private to this for loop
                  currentPos = "pos" + i;
                  this["pos" + i].addEventListener(MouseEvent.CLICK, posClicked)
In this version, I just need to pass over the currentPos variable to the function, but I'm not sure if that's possible.
Thanks,
Corey

Before solving, I would caution why you need them to have a unique function/unique function name. You should be able to have them all hit the same function and do different logic within depending on the target.
That aside, you could do something like this:
for (i = 1; i < compPositions +1; i++)
          currentPos = "pos" + i;
          this["pos" + i].addEventListener(MouseEvent.CLICK, this["clicked" + i])
However, you would have to manually define each function. Alternatively, you can use closures:
for (i = 1; i < compPositions +1; i++)
currentPos = "pos" + i;
this["pos" + i].addEventListener(MouseEvent.CLICK, getFunction(i))
function getFunction(i:int):Function
          return function(e:MouseEvent):void { trace("Clicked " + i); };
EDIT:
Using the closure method you could also pass the current pos if you needed to:
for (i = 1; i < compPositions +1; i++)
currentPos = "pos" + i;
this["pos" + i].addEventListener(MouseEvent.CLICK, getFunction(i, currentPos))
function getFunction(i:int, currentPos:String):Function
          return function(e:MouseEvent):void { trace("Clicked " + i + " currentPos = " + currentPos); };

Call a function with variable function name

Hey guys,
I have a func_table which maintains function names (each one makes reference to a dynamically generated stored function)
I need to make a procedure that calls the functions in that table one by one using its name retrieved from SELECT func_name FROM func_table;
Thanks

929955 wrote:
I have a func_table which maintains function names (each one makes reference to a dynamically generated stored function)
I need to make a procedure that calls the functions in that table one by one using its name retrieved from SELECT func_name FROM func_table;Okay, first the bit where I, foaming at mouth and vigorously waving a well used lead pipe around, tell you that this is HIGHLY SUSPECT and likely a FLAWED DESIGN. That dynamic code is 99% of the time wrong. That dynamic code opens securities hole for code injection. That dynamic code often results in severe performance penalties as the coder is clueless about what the Oracle Shared Pool is about. And so on...
As for a basic procedure template to do this - assuming all functions get the same parameter as input and that all functions returns the same data type:
create or replace procedure FooBarFunctions( paramVal number ) is
.. variables and types and cursor definitions..
begin
for c in (
    select function_name from my_fubar_functions order by function_order
) loop
      plsqlBlock := 'begin :result := '||c.function_name||'( param => :p ); end;';
      execute immediate plsqlBlock using out funcResult, in paramVal;
      .. do something with funcResult ..
end loop;
.. more code..
end;
{code}
Looks not like a sensible approach though - and begs for justification as to why this approach is needed. What justification do you have?

Module Function Name Resolution - Issues with DefaultCommandPrefix

Just getting started on module development, running PS4, and I've run into an... inconsistency... that I'm trying to understand. I've got two test functions, Get-Something and Set-Something in a script module. In my manifest file I specify a DefaultCommandPrefix
of 'Test'.
My issue is the function name resolution doesn't result in an executable result if you leave PowerShell up to it's own process.
To begin with I closed all sessions and deleted all files in the CommandAnalysis directory. After starting a session I waited for the CommandAnalysis cache to populate. Then I ran a series of test commands to illustrate how, most of the time, the function
name PowerShell registers with tab completion can't be executed because it lacks the 'Test' prefix. Even worse, much of the time tab completion won't recognize the correct (i.e., with prefix) name of the function and honor tab completion for it.
Having just learned of the CommandAnalysis cache I assumed I would see it change as PowerShell 'learned' more about the module because the name resolves differently over time. I've included three files at the end of this post, the module code (ModuleTest.psm1),
the manifest (ModuleTest.psd1) and the capture of output to the PowerShell session (ModuleTest.txt). I've tried to include the times I used <tab> and <ret> for tab completion and execution as well as (comments in parenthesis for things I did like
starting a new session and checking the CommandAnalysis cache for changes).
An example is, when first starting a session typing 'get-som<tab>' will resolve to 'Get-Something' (prefix 'Test' missing) and typing 'get-test<tab>' won't resolve to 'Get-TestSomething'. Try to execute the 'Get-Something' from tab completion
and you'll get the 'name not recognized, blah, blah'.
Now if you type 'get-som<tab>' PowerShell will resolve to 'ModuleTest\Get-Something' - looks promising... but no. Try to execute the 'ModuleTest\Get-Something' from tab completion and you'll still get the 'name not recognized, blah, blah'.
Even though the same key strokes resolved differently there were no changes made to the CommandAnalysis cache so I'm lost on why it produces two different (though equally useless) results.
Manually importing the module and sometimes running Get-Command -Module ModuleTest will make tab completion of the function names behave correctly. Is this a known issue with using DefaultCommandPrefix in script modules or is there something I need to include
in the manifest to enforce strict name recognition (including the prefix)?
<ModuleTest.psm1>
function Get-Something
Write-Host "Get-Something Executed"
function Set-Something
Write-Host "Set-Something Executed"
<ModuleTest.psd1>
# Script module or binary module file associated with this manifest
ModuleToProcess = 'ModuleTest.psm1'
# Version number of this module.
ModuleVersion = '1.0.0.0'
# ID used to uniquely identify this module
GUID = '241877ff-64be-40c8-a603-8d5acf7a48d8'
# Author of this module
Author = 'wb3'
# Company or vendor of this module
CompanyName = ''
# Copyright statement for this module
Copyright = '(c) 2015. All rights reserved.'
# Description of the functionality provided by this module
Description = 'Module description'
# Minimum version of the Windows PowerShell engine required by this module
PowerShellVersion = '2.0'
# Name of the Windows PowerShell host required by this module
PowerShellHostName = ''
# Minimum version of the Windows PowerShell host required by this module
PowerShellHostVersion = ''
# Minimum version of the .NET Framework required by this module
DotNetFrameworkVersion = '2.0'
# Minimum version of the common language runtime (CLR) required by this module
CLRVersion = '2.0.50727'
# Processor architecture (None, X86, Amd64, IA64) required by this module
ProcessorArchitecture = 'None'
# Modules that must be imported into the global environment prior to importing
# this module
RequiredModules = @()
# Assemblies that must be loaded prior to importing this module
RequiredAssemblies = @()
# Script files (.ps1) that are run in the caller's environment prior to
# importing this module
ScriptsToProcess = @()
# Type files (.ps1xml) to be loaded when importing this module
TypesToProcess = @()
# Format files (.ps1xml) to be loaded when importing this module
FormatsToProcess = @()
# Modules to import as nested modules of the module specified in
# ModuleToProcess
NestedModules = @()
# Default command prefix
DefaultCommandPrefix = 'Test'
# Functions to export from this module
FunctionsToExport = '*'
# Cmdlets to export from this module
CmdletsToExport = '*'
# Variables to export from this module
VariablesToExport = '*'
# Aliases to export from this module
AliasesToExport = '*'
# List of all modules packaged with this module
ModuleList = @()
# List of all files packaged with this module
FileList = @()
# Private data to pass to the module specified in ModuleToProcess
PrivateData = ''
<ModuleTest.output>
PS C:\Scripts\PowerShell> Get-ChildItem -Path 'C:\Program Files\WindowsPowerShell\Modules' -Recurse<ret>
    Directory: C:\Program Files\WindowsPowerShell\Modules
Mode                LastWriteTime     Length Name
d----          3/5/2015   9:06 AM            ModuleTest
    Directory: C:\Program Files\WindowsPowerShell\Modules\ModuleTest
Mode                LastWriteTime     Length Name
-a---          3/5/2015   8:50 AM       2907 ModuleTest.psd1
-a---          3/5/2015   9:01 AM        140 ModuleTest.psm1
PS C:\Scripts\PowerShell> Get-Module -ListAvailable<ret>
    Directory: C:\Program Files\WindowsPowerShell\Modules
ModuleType Version    Name                                ExportedCommands
Script     1.0.0.0    ModuleTest                          {Get-Something, Set-Something}
PS C:\Scripts\PowerShell> get-som<tab>
PS C:\Scripts\PowerShell> Get-Something<ret>
Get-Something : The term 'Get-Something' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Get-Something
+ ~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (Get-Something:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-som<tab>
PS C:\Scripts\PowerShell> ModuleTest\Get-Something<ret>
ModuleTest\Get-Something : The term 'ModuleTest\Get-Something' is not recognized as the name of a cmdlet, function,
script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is
correct and try again.
At line:1 char:1
+ ModuleTest\Get-Something
+ ~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (ModuleTest\Get-Something:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab>
PS C:\Scripts\PowerShell> Get-TestSomething<ret>
Get-Something Executed
(New Session)
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab><ret>
get-tes : The term 'get-tes' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ get-tes
+ ~~~~~~~
    + CategoryInfo          : ObjectNotFound: (get-tes:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
PS C:\Scripts\PowerShell> Import-Module ModuleTest<ret>
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab><ret>
PS C:\Scripts\PowerShell> Get-TestSomething
Get-Something Executed
(New Session)
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab><ret>
get-tes : The term 'get-tes' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ get-tes
+ ~~~~~~~
    + CategoryInfo          : ObjectNotFound: (get-tes:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
PS C:\Scripts\PowerShell> Get-Command -Module ModuleTest<ret>
CommandType     Name
ModuleName
Function        Get-TestSomething
ModuleTest
Function        Set-TestSomething
ModuleTest
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab>
PS C:\Scripts\PowerShell> Get-TestSomething<ret>
Get-Something Executed
PS C:\Scripts\PowerShell> moduletest\get<tab><ret>
PS C:\Scripts\PowerShell> Get-TestSomething<ret>
Get-Something Executed
William Busby, PMP

Hi William,
yes, that's something you'll either have to do the hard way or live with admin confusion.
If you're using Sapien's PowerShell Studio as an Editor (hint: Usually a great idea), you can very easily rename a function, even in a multi-file module project, by rightcklicking on the function-name and selecting "rename".
Alternatively you can do a bulk rename with Powershell:
Get all functions in your module (Load it and check exportedcommands)
loop over each function-name
calculate new name
search your entire project for all references and replace them.
Let me see ...
function Rename-ModulePrefix
[CmdletBinding()]
Param (
[Parameter(Position = 0, Mandatory = $true)]
[string]
$ModuleName,
[Parameter(Position = 1, Mandatory = $true)]
[string]
$OldPrefix,
[Parameter(Position = 2, Mandatory = $true)]
[string]
$NewPrefix,
[Parameter(Position = 3)]
[string]
$Path
# Catch all typos
Import-Module $ModuleName -ErrorAction 'Stop'
# Get root path if not manually passed
if (-not $PSBoundParameters["Path"])
$Path = (Get-Module $ModuleName).Path
# Get module files
$Files = Get-ChildItem -Path $path -Recurse -Include "*.ps1", "*.psm1", "*.psd1"
# Iterate over each file
foreach ($file in $Files)
# Null variable in case you get an empty file somewhere and run this from Win 7
$data = $null
# Get Content of file
$data = Get-Content $file
# Replace strings
foreach ($c in (Get-Module $ModuleName).ExportedCommands)
$newName = $c.Name -replace $OldPrefix, $NewPrefix
$data = $data | ForEach-Object { $_ -replace $c.Name, $newName }
# Write back to file
$data | Set-Content $file
While I didn't proof it, in theory this should do it (Make a backup before running it :) ).
Cheers,
Fred
There's no place like 127.0.0.1

What function name to use when calling an XI RFC Sender adapter?

Hello experts, I need some help please...
We are trying to setup an RFC Sender adapter in XI 3.0 for the first time. We followed Michal's <a href="/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step on how to setup the RFC destination in the sender system (ECC 5.0 in our case) and the corresponding communication channel in XI. We can make a connection from ECC to XI via the destination, but we are getting an error in the communication channel monitor stating that the JCO.Server could not find the server function '<i>message interface name</i>'. We have tried to use the message interface name, the message type name and the data type name, but all return the same error. What function name should we be using and how does this name get registered with the JCO server?
Message was edited by:
Matt Austin

hi
Have you registered the pragram id properly in sender system ?
Steps to that
1. first create RFC sender adapter in XI and give any name as program id Give Gateway host n gateway service of appilcation system
2. activate it properly
3. program get regiostered on app system
4. go to application system and create RFC destinationn there give the same program id name
now it should work
regards
Sheetal

Function name in Logfile

Similar Messages

Maybe you are looking for