Function of memory field in EKKO

what is the function of the memory field in table EKKO? Whether it is used to determine an incomplete purchase order or there is any other field from which we can determine incomplete PO orders.

hi,
Purchase order not yet complete
Use
You can use the Hold function to store faulty or incomplete purchase orders in the SAP System.
You can then continue processing or complete these POs that you have put "on hold" in this way at some later date.
A PO that is on hold is not transmitted to the vendor. It is, however, MRP-relevant.
The following functions are not not possible in the case of a PO that is on hold:
Message output (printing or transmission of documents in message form)
Posting a goods receipt
Posting an invoice
Note:If a PO has been saved, it cannot later be processed using the Hold function.

Similar Messages

  • Where is the Memory field in EKKO table located in ME21 transaction

    Hi,
    there is a field memory in the EKKO table . What is purpose of that field . Where can i find that field in ME21N transaction.

    Hi Josephine,
       The Dataelement documentation says as follows:
    <i><b>"You can use the Hold function to store faulty or incomplete purchase
    orders in the SAP System.
    You can then continue processing or complete these POs that you have put
    "on hold" in this way at some later date.
    A PO that is on hold is not transmitted to the vendor. It is, however,
    MRP-relevant.
    The following functions are not not possible in the case of a PO that is
    on hold:
    o   Message output (printing or transmission of documents in message
        form)
    o   Posting a goods receipt
    o   Posting an invoice
    Note:
    If a PO has been saved, it cannot later be processed using the Hold
    function."</b></i>
    Regards,
    Ravi

  • Moving data from custom fields to ekko table

    Hi Experts,
    I added new custom tab into me21n,me22n,me23n header thro me_gui_po_cust and me_process_po_cust.
    If i enter values in my custom fields, transport_from_model this method is not triggering.i have written below code in this method.
    METHOD if_ex_me_gui_po_cust~transport_from_model.
      DATA:     l_header  TYPE REF TO if_purchase_order_mm,
                ls_mepoheader  TYPE mepoheader,
                ls_customer TYPE ci_ekkodb.
      CASE im_name.
        WHEN subscreen.
          mmpur_dynamic_cast l_header im_model.
          CHECK NOT l_header IS INITIAL.
          ls_mepoheader = l_header->get_data( ).
          CALL FUNCTION 'ZMM_GET_DATA'
            EXPORTING
              im_ebeln       = ls_mepoheader-ebeln
    *            im_ebelp       = ls_mepoheader-ebelp
           IMPORTING
             ex_data        = ls_customer .
          MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
          MOVE ls_customer-ztender TO dynp_data_pbo-ztender.
          MOVE ls_customer-zemdapplicable TO dynp_data_pbo-zemdapplicable.
          MOVE ls_customer-zpbgapplicable TO dynp_data_pbo-zpbgapplicable.
          MOVE ls_customer-zemdamount TO dynp_data_pbo-zemdamount.
          MOVE ls_customer-zemdvalidity TO dynp_data_pbo-zemdvalidity.
        WHEN OTHERS.
      ENDCASE.
    ENDMETHOD.
    i cant move my values entered in custom fields to ekko table.
    please help if u know..
    regards,
    Kavitha
    Edited by: Matt on Mar 23, 2011 10:55 AM added  tags

    Hi,
    check this out.. !!
    Import data from Excel to Oracle Database and
    Added link From Ask Tom.. your requirement you would be satisfied.. I supppose.. !!
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:908428873069
    - Pavan Kumar N

  • Addition of a Field in EKKO/Data not getting populated for that field

    Hi All,
    I have added a Z Field in EKKO Table through the Append Structure "CI_EKPODB".
    There are around 2000 records in EKKO and for all the records that Z field is Blank.
    But, when I write a Select Query in Program to Fetch the Records where that Z Field is BLANK, I get only 50 Records.
    The same happens when I Execute SE16 for EKKO by giving condition Z Field = INITIAL. I get only 50 records in the output.
    Please help me understand why I dont get all the Records where that Z Field is INITIAL?
    Is any customization required or is this a Technical Issue?
    Please help.
    Thanks in Advance.

    hi rohan,
    if you are adding a field in a table  by append structure then make that field as ZZ instead of Z to differentiate it from normal fields.
    now when you have created the field in a append structure then if have not checked the initial flag.thats why u are getting this data inconsistency.
    this is because earlier 2000 entries are prestent in the table , now when you add another field in the table then that field will not have value for those 2000 records.
    now when you create the fiels select the init flag field,if you select this then new flag field will  NOT NULL,so initial values will be filled for that field for existing 2000 records.
    Note : NULL and INITIAL are different things, NULL means not defined and initial means which is having its initial value.
    check that init flag and u will get those 2000 records, you are getting inconsistent data now becuse value for that field is null ie not defined.
    hopr this will solve ur post and u wil get the concept of append structure.
    Thanks and regards,
    Tanmaya

  • Decode function involving 2 fields (urgent)

    Hi .. I am trying to use the decode function involving 2 fields.
    The query runs but does not produce the correct results. If
    anyone knows, please reply .. Usually decode function involves
    one column only but I have more
    than one. The situation is : If ins_code = 2 or special_code =
    MMI, put a 'Y', otherwise, it's a 'N'. Does anyone know how to
    put this in a decode statement? Thanks

    Thanks, Suresh ... but I have to put this condition using the
    decode statement because that's how the rest of the program is
    written. It's part of the script that I have to change. The
    current statement is this: decode(ins_code, '2', 'Y', 'N'). I
    have to change it to ins_code =2 or special_feature = MMI.
    Please reply ... thanks a lot....

  • Typeahead function in search field inside Facebook does not work in Firefox 13.0

    Until 3 or 4 days ago, cool typeahead function inside search field inside Facebook always worked in Firefox. Now since 4 days ago, it does not work. But the typeahead function works inside search field inside Facebook on Internet Explorer BUT I prefer to use Firefox and do NOT want to switch to IE!!!
    Is there anything I can do to regain that function?
    Aharon

    Shalom DJST,
    Thank you for reply.
    The behavior did not start with Firefox 13. I actually upgraded to Firefox 13 in hope it would solve the problem that happened in previous older versions. It failed to solve the problem.
    It had been working for 3 years on Firefox until last or 2 weeks ago.
    Regarding search, I mean by "type-ahead" which is that FB's search field offers a drop down list of possible search results as I type. For example, if I type S, it will show list of all people or groups with first letter S. If I type sk, it will show list of anything such as people or groups that starts with Sk, and so on. This is most valuable time saving technique to look for my pals to say hi or groups that I do not belong to but want to read their news or info.
    I think it is Facebook's programming problem but if I ask them, they will point to Firefox's fault by saying that it works for my Internet Explorer but not for Firefox and I do not want to get involved into tug war between Facebook and Mozilla.
    I am just bummed that the valuable time saving search method no longer exists on Firefox.
    Regards,
    Aharon

  • What field in EKKO determine the final release dateof PO

    hi,
    i need to have the final release date to be show in a purchase Order print out. but i cant find the final release date field in EKKO table. can you please advice how am i going to get the final release date?
    very thanks for the help.

    Hi,
            Final release date is not stored in EKKO it store in CDHDR table you can chaeck CDHDR-UDATE field for that.
    Regards
    Gagan

  • How to add F4 functionality to a field in the Custom Infotype

    Dear Friends,
    I have created a custom Infotype 9332 for tracking the career growth of the employee. now i want add F4 functionality to a field in this infotype. How to do it and where to implement the code. Please suggest your valuable options.
    regards.

    Hi,
      You have 2 options.
    1.Table Level
    create a search element and you can attch it in table.
    2.Screen Level.
    In the Flow logic, create a module like " FIELD P9332-fieldname MODULE f4_values" under PROCESS ON VALUE-REQUEST.you can do the coding in the module for populating.
    Reward points if helpful.
    Regards,
    Manoj.

  • F4 functionality for a field in structure

    dear all
    my problem is i need to provide f4 help functionality for the field 'name' in structure 'cdir' is it possible. if possible please suggest me how to proceed.
    thanx in advance

    Hi,
    If you want to provide F4 functionality on that field in your program then check this link
    F4
    But if u r thinking in standard structure then its of no use as structures dont hold any values.
    Regards,
    Amit
    Reward all helpful replies.

  • Assigning search help (F4 functionality ) for recipient field in IW32

    Hi,
    my requirement is to assign search help (F4 functionality) for recipient field in components tab of IW32. anybody help me to assign search help for it. same way i need to assign that in MIGO, MB21, MB1A goods recipient field.

    hi,
    refer to the following link:
    http://www.saptechies.com/how-to-add-f4-help-to-a-field-on-screen-module-pool/
    i hope it helps
    regards

  • Disabling tab functionality in a field

    Dear all,
    How do you disable tab functionality in a field in sap b1 2005? I would just like to have a formatted search on the field.
    Regards,
    Monil

    Hi Monil
    Is this at row level? If so, then set it as visible but not active in the Form settings. If it is a header field, then consider that the TAB is to validate a field and changing standard SAP logic is not advisable. Some more information on the exact field type will help me guide you better.
    Kind regards
    Peter Juby

  • Reg:function module to retrive the ekko table data

    Hi all,
    Is there any function module to retrive the ekko table data for the given select-options and parametrs.
    could you provide that.
    Thanks & regards,
    S.chaitanya.

    dear chaitanya,
    may be you can use this function module ME_READ_EKKO_MULTIPLE which can be used to pass the select options to retrieve the desired EKKO data.
    OR the best way would be to do a SELECT Query which would retrieve the data faster and in an effective manner.
    Hope this helps you.
    Help Children of U.N World Food Program by rewarding and enocourage others to answer your queries
    Thanks
    Venugopal

  • Standrad Functionality of the Field Recipient in the P.O.

    Hi,
    In the creation mode of the Purchase order it will trigger an output,before saving the PO we can click on messages and select the output type and click on communication method,another screen will open up in that Recipient field I have given input of others ID and saved the PO.
    when you process a output it will generate a spool that spool is still seen in my ID even though the recipient ID has been Changed before saving the PO.
    The spool should have been shown in another ID since we have changed the recipient ID.
    I want to know the standard functionality of the field Recipient. Can any one of you explain the standard functionality of the Recipient field.
    Thanks,
    Kiran Bodla

    Hi,
    Please note that since you have created/processed the PO using your id - the spool was generated in your id.
    The spool has nothing to do with the recipient id.
    When you process the output spool will be generated in your id.
    Hope it's clear.
    Thanks & Regards,

  • What STATU field of  EKKO indicate

    hi,
    I want to know what actually statu field of ekko indicate. In its description it shows
    RFQ with quotation
    Purchase order from automatic conversion of requisitions
    Purchase order from goods receipt
    Purchase order from data transfer
    Purchase order from allocation table
    5 more more of this type.
    Actullay I want the user to search Po on statu field . But the desciption that  i mention above  will not be good from the user point. Can anyone tell what actually this statu field different option mean
    regards
    Aashish garg

    Hi
    0PO_STATUS
    Status of purchasing document
    ESTAK
    <b>
    Technical name: 0PO_STATUS</b>
    Use
    Indicates the status of a purchasing document.
    If a purchase order has the status K it is a purchase order from Business-to-Business Procurement. In this case, only the goods receipt and the invoice receipt are updated in the Business Information Warehouse – not the purchase order.
    Technical Data
    Available from Release
    3.1I
    External hierarchy
    Not available
    I hope this`ll give you some guide line.
    Pl award the points.
    Thanks

  • To maintain 'Functional Location Description' field as mandatory field

    Hi All,
    I am unable to maintain the "Functional Location Description" field as mandatory field (Screen Filed: IFLO-PLTXT).
    In IMG settings, I am unable to find this field to change it to "required" field. Could you pls. tell me the way to make this field as mandatory.
    Thanks in advance.
    JK

    hi try t.code oiaj there is a filed of description

Maybe you are looking for