Program execution date

Hi,
I'd like to know wether there is a utility that reports, for a given list of programs, the program name and it's last date of execution.
Thanks

Hi Anji,
I´ve searched the table TADIR using SM30 transaction. This transaction does not allow multiple entries, and I could not see the date I'm looking for in this table.
I don't know if there is any detail I'm not taking into account.
Claudio

Similar Messages

Program execution date record or log

Hi:
We've been requested by Development team, to discover if there is any report or program or log that trace the date and/or time that a program has been executed.
I guess that there is not exactly a report like these, but if anyone can give us an idea of how to get these information, we will apprecciate it.
Thanks a lot, abrahamdelgadov

Abraham,
Certain information pertaining to your requirement are available in Table REPOSRC.
Try REPOSRC in SE11.
Other way is
Check the system log. Use the transaction ST03 and click on Performance database (Push button). Hit the target system and select period (you want to analyse ...this is system log and you may not be able to read if the last execution date of the transaction is more than 90 days..not sure how it is configured in your system) and click on "Transaction Profile".
This holds the complete list of Programs / transaction codes executed during last three months. Only painful thing is, we need to browse the list to nail down to the requirement.
Vinodh Balakrishnan

Date format changes in the middle of a program execution

In my C code I have a series of select statements.
When I first get a session to the database I use the following command to set the date format
alter session set nls_date_format = 'MM/DD/YYYY HH24:MI:SS'
It works fine for a few queries. After a while during the program execution I see that the date format changes to 'DD-MON-YY' format. This results in a series of error in my code because I expect the date format to always be in the 'MM/DD/YYYY HH24:MI:SS' format.
Any idea why the date format should change all of a sudden in the middle of the program execution.

I second the idea that you should always use TO_DATE and TO_CHAR if you want to reliably convert between dates and strings.
Without seeing your code, it is hard to say why your date format is changing, but the most likely reason is that you are changing users somewhere in the code. For example:
SQL> show user
USER is "OPS$ORACLE"
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003
SQL> ALTER SESSION SET nls_date_format='dd-Mon-yyyy hh24:mi:ss';
Session altered.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-Jul-2003 10:15:12
SQL> connect jtest/test
Connected.
SQL> SELECT sysdate FROM dual;
SYSDATE
11-JUL-2003TTFN
John

Itunes error. the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention helps protect against damage from viruses and other threat.

I have a windows Xp computer. and i needed to download the newest itunes to support my ipod touch. but now my computer doesn't let me open itunes. The the data execution prevention pops up and says "to protect your computer, windows has closed this program. Data execution prevention (DEP) helps protect against damage from viruses and other threat." I tried excluding itunes from DEP on settings but it still doesn't work. I don't know what to do. please help me!!!
thanks

try to select the computer cd/dvd autorun off.
I had the same problem, then Kaspersky software found a conflict suggesting me this solution.
Itunes now works...even if it always asks to set the cd/dvd autorun on when lunched.

Program to collect user u2013 transaction execution data for past period

Hi Experts
We are developing a program to collect user u2013 transaction execution data for past period ( 3 months-1 year ). We are getting required User and Tcode output but unable to find exact count per tcode ( executed by respective user).
We have following count components available in SAPWL_WORKLOAD_GET_STATISTIC / SWNC_COLLECTOR_GET_AGGREGATES
COUNT , DCOUNT ( Dialog count for transaction ) , UCOUNT , BCOUNT , ECOUNT, SCOUNT ,LUW_COUNT .
Out of which LUW_COUNT -Logical Units of Work comes close to no ot time transaction was executed but itu2019s even not the exact count as one transaction code can have more than one LUW .
Does anyone have idea about how to get the right count .
Thanks
Vani

If audit log is enabled in SM19 for transaction criteria all, you can get the transaction history executed by the users. But may need more space on audit file system if this is enabled for all users. May be you can archive once in 3 months into ZIP files and can unzip whenever you need.

Payment Program Creation Date and User (is this in any table in SAP R/3)?

Dear Experts!
The treasury guy asked me whether there would be a way to recover the "Payment Program" Creation Date and Created by (User) from Payment Program Executions (F110 transaction).
I searched on the REGU* tables and I didn't find out this information.
Does anybody know whether there is any table where this is recorded?
NOTE: We cannot use the information from "Proposal Log" because the log is removed from the Productive System and only the last 3 (three) days are remaining.
Thanks and Kind Regards,
Daniel Carvalho.

Hello "The Wirtschaftsmann",
Thanks for the reply. However, I need the Creation Date and Creation by of the Proposal / Payment Run steps.
Not sure if this information is available nowadays at SAP. I opened an incident with SAP, let's see what they reply to us.
Regards,
Daniel

Best Practice for Storing Program Config Data on Vista?

Hi Everyone,
I'm looking for recommendations as to where (and how) to best store program configuration data for a LV executable running under Vista. I need to store a number of things like window location, values of controls, etc. Under XP I just stored it right in the VIs own execution path. But under Vista, certain directories (such as C:\Program Files) are now restricted without administrator rights, so if my program is running from there, I dont think it'll be able to write its config file.
Also right now I'm just using the Write to Spreadsheet File block to store my variables. Does this sound alright or are these better suggestions?
Thanks!
Solved!
Go to Solution.

I fopund some stuff on microsoft page. Here the link and a short past from taht document:
http://www.microsoft.com/downloads/details.aspx?FamilyID=BA73B169-A648-49AF-BC5E-A2EEBB74C16B&displa...
Application settings that need to be
changed at run time should be stored in one of the following
locations:
 CSIDL_APPDATA
 CSIDL_LOCAL_APPDATA
 CSIDL_COMMON_APPDATA
Documents saved by the user should be
stored in the CSIDL_MYDOCUMENTS folder.
Can't tell you more as I have no Vista around to look for the CSILD stuff.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Program execution during RIMODAC2..will it always reach to cif user exit

Hello ,
We are implementing cif user exit for Purchase Order at R3 side to capture additional date field. So logic to capture additional date field is put in user exit CIFPUR01. We have RIMODAC2 background job for Purchase order running on daily basis.
if there is no change in standard Purchase Order objects. When RIMODAC2 is executed for purchase order Integration models ..will program execution still always reach to R3 user exit part of the program irrespective of if any change in standard purchase order object has happened or not.
Will appreciate your answer.
Thank you
Best Regards
Nilesh Patil

Nilesh,
I am no longer sure I understand the question.
RIMODAC2 activates the model. Once a model is activated, if someone changes certain specific fields in an R/3 object, then these changes are sent to SCM, either immediately or via change pointers. All this happens irrespective of IM userexits.
If this same field in this same object is changed in R/3, and a userexit also has been implemented, the userexit will execute according to its design, performing whatever task it has been programmed to do.
If you create and implement a userexit, it begins working at that moment in time that it is installed. Data that flowed across 'yesterday' to SCM is not affected. Data that flows across 'tomorrow' will be affected. Data in R/3 will usually only flow across to SCM if there is some kind of triggering event, usually a database 'change' transaction (e.g., ME22N for POs) The mere act of installing a userexit will not generally affect existing data on either side. The userexit only affects data that flows across the IM. Unchanged records in the R/3 database will generally not be sent to SCM by the IM, and will not be subject to userexit processing.
It is not generally the responsibility of a functional consultant to explain the workings of a userexit to a technical consultant. It is enough that the functional identifies the userexit, and specifies the business requirement in as much detail as possible. The developer is then responsible for carrying out the coding. Technicals are generally expected to be competent enough to determine from the userexit docs, and from the surrounding code, how a userexit works. They can also raise a message to SAP. In the end, it is all just ABAP, although userexit implementations can be quite challenging. SAP seldom provides enough details in their documentation. Once the Technical has finalized the code, Functional and Technical together then perform unit testing, before passing the mods to users for integration testing.
If your client's coders are unable to manage the task, perhaps they should engage your company to provide technical expertise, as well as functional expertise.
Best Regards,
DB49

Error out the ABAP program execution

I have an ABAP program which transfers data from a file to a database table thru function module in packages of 50,000 records.
Upon the successful completion of this ABAP program, I start dependent processes.
Sometimes the function module does not transfer the data and returns the exception back to the ABAP program - which is an expected scenario. Currently when ever an exception is received in the function module, I stop the ABAP program with a STOP statement.
The ABAP program stops, which meets my first objective. But what happens is, if you look at the job log --> it is Completed in terms of program execution and the dependent processes automatically start - which is not meeting my second objective.
My second objective is to force the ABAP program to error out in such a way that .........
1) The program execution is stopped
2) If I look at the job log it should not be Completed (I am looking for something like Cancelled so that the dependent process do not get started automatically)
Is it possible to error out the ABAP program execution by raising an exception or something, so that when i look at the job log - it shows Cancelled and not Completed?
Let me know if you have any questions.
Thanks,
RK.

Adrian,
Thanks - This is exactly what I was looking for, it works.
For some reason Messages skipped my mind and I was looking at raising Exceptions
Solution:
if sy-subrc NE 0.
message id 'abc' type 'E' number 000.
endif.
Thanks,
RK.
Edited by: RK on Jan 17, 2010 7:47 PM
Edited by: RK on Jan 17, 2010 7:50 PM
Edited by: RK on Jan 17, 2010 7:52 PM

Last execution date

Hi SAP Minds,
How can we find out the last execution date of a report? Is there any F.M available to serve this, or any system tables are there?
Please help me out.
Thanks in advance.

Vamsi,
check the below t codes and tables...
Table TRDIR
tcode SM22
ST03N Transaction
try this program RSSTAT20
Definetly u will find the info

Concurrent program execution Error

i have genrated a simple report and copied to linux server,could any on help me how to resolve the error.Eventhough I was Getting the output.
ERROR:
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 4349601.
Review your concurrent request log and/or report output file for more detailed information.

I have copied the message from the logfile itself for complete reference,plz look in to the following error
ERROR
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
Report Builder: Release 10.1.2.0.2 - Production on Wed Jun 4 16:36:01 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 4349601.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 04-JUN-2008 16:36:02
---------------------------------------------------------------------------

Execution date in a query

Hello all,
Is there any way to use sy-datum or something like that to store execution date of a query?
Thanks in advance
Carmen

Hi Carmen,
could you please clarify what do you want to achieve?
- Do you want to store somewhere when a particular query has been executed?
- Do you want to execute a query with a filter on SY-DATUM?
As a first input, on the global properties on a query, you have the query keydate, which is by default SY-DATUM
hope that helps
Olivier.

Remote Program Execution

Dear Sir,
I have following problem and very desperately looking for the solution .
I have 9ias installed on window-2000 server and on this machine JSP/Servlet is also running .
There is another Unix server also having Oracle 7.3.4 and Pro*C installed .
My requirement is that on receiving a web client request , the invoked JSP must also execute a C program on the unix machine ( the execution of C program creates a text output file on the unix machine ) and after completion of C program execution the output text file must be available to JSP . As a final result of JSP execution this output text file must be returned to WEB Client .
Please guide me how to go about this .
Thanks and Regards
B V Mittal

Call your C program like this from your controller servlet
Process p = Runtime.getRuntime().exec("c.exe");
BufferedReader stdInput = new BufferedReader(new InputStreamReader(p.getInputStream()));
Then read from your generated file and populate whatever you need into a bean.

List of changes in the notification execution dates

Hi,
I want to generate a list of changes in the execution dates of the notification in t-code QM02. Table VIQMEL.
I want to know how many times the field 'required end date' has been changed in the 'execution' details of administration tab of the notification.
Please help....
Regards
Vrish

@ Priyanka & Sumit,
I have tried these standard options, but the changes in the date, viz how many times the notification was closed (after reopening) is not getting recorded here. It only shows the recent change date. I want a list of changes edited in that field.
For e.g.
Notification was closed on 01.08.2010,
but then again reopened on 03.09.2010, closed on 14.09.2010,
again reopened on 19.12.2010 & closed on 05.01.2011,
Then in this case I should get a list that the changes were done on 01.08.2010, 14.09.2010 & 05.01.2011.
Is it possible WITHOUT ABAP help?
Please reply,
Thanks in advance,
Regards
Vrish

How do I insert or delete a row in tree during program execution ?

Trying to understand how to edit/modify a tree control during program execution, specifically if I want to add a row or delete a row.
Thanks

Hi dwjef,
Go through this.I think by going through this you we will get an idea of how to achieve what you are trying.
https://decibel.ni.com/content/docs/DOC-20747
Thanks as kudos only

Program execution date

Similar Messages

Maybe you are looking for