Function parameter "I_REFRESH_FOLDER_INFO" is unknown during transport

Hello,
We are currently running NW 7.01 SPS05.  When migrating a transport containing a Crystal Report, the transport fails with a RC=12.  The short dump indicates that it is failing when calling FM "/CRYSTAL/PUBLISH_REPORT" because of an invalid parameter "I_REFRESH_FOLDER_INFO".  It seems that EHP1 changes the logic in "RSCR_CE_PUBLISH_REPORT" to try to locally execute /CRYSTAL/PUBLISH_REPORT instead of defaulting to executing it via RFC Destination 'CRYSTAL_PUBLISHER' if the FM exists locally.  This check causes the FM to be executed locally, which fails, as the local version of the FM lacks this parameter.  We have searched on Service Marketplace for a newer version of the connectivity kit, however we cannot find one.  The FM was last changed in R21K900579.  Does anyone know of a newer one, or know of a way to force it to go via RFC as it used to?  We have a message in with SAP however they are taking much too long to respond (weeks).

Ingo,
Our first action was opening an OSS Message, however since the dialog has been going back and forth with them for weeks now, I thought I'd see what the resident gurus in this forum had to say.   
It appears the latest kit (SP 2.1 dated 10/23/09) we've now found contains the following transports which are different:
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900648.r21 and R900648.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900627.r21 and R900627.r21)
Cluster Definition transport (K900628.r21 and R900628.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900645.r21 and R900645.r21)
Personalization transport (K900646.r21 and R900646.r21)
MDX Query Connectivity transport (K900643.r21 and R900643.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)

Similar Messages

  • Error while calling FM : Function parameter "PE_LFA1" is unknown

    Dear Experts,
    I am trying to call a FM in my code, but somehow I am getting the following error .Please help !
    My code is :
    DATA :  VENDOR_NO TYPE WSRS_SHVDST_RES-VENDOR_NO,
            PE_LFA2 TYPE LFA1,
            PE_ADDR2 TYPE BAPIADDR1,
            PE_ADRPRT2 TYPE WISO_ADRPRT,
            PE_RETURN2 TYPE WSRS_RETURN,
            PE_LFM2 TYPE LFM1,
            PE_LFB2 TYPE LFB1.
      DATA:
        node_vendor                         TYPE REF TO if_wd_context_node,
        elem_vendor                         TYPE REF TO if_wd_context_element,
        stru_vendor                         TYPE if_vendor_view=>element_vendor ,
        item_vendorinp                      LIKE stru_vendor-vendorinp.
    navigate from <CONTEXT> to <VENDOR> via lead selection
      node_vendor = wd_context->get_child_node( name = if_vendor_view=>wdctx_vendor ).
    get element via lead selection
      elem_vendor = node_vendor->get_element(  ).
    get single attribute
      elem_vendor->get_attribute(
        EXPORTING
          name =  `VENDORINP`
        IMPORTING
          value = item_vendorinp ).
    VENDOR_NO = item_vendorinp.
    CALL FUNCTION 'WSRS_O_VENDOR_GET_DETAIL'
    EXPORTING
    PE_LFA1 = PE_LFA2
    PE_ADDR1 = PE_ADDR2
    PE_ADRPRT = PE_ADRPRT2
    PE_RETURN =PE_RETURN2
    PE_LFM1 = PE_LFM2
    PE_LFB1 = PE_LFB2
    IMPORTING
    PI_VENDOR_NO = VENDOR_NO.
    My Error is :
    Note
    The following error text was processed in the system HE6 : Function parameter "PE_LFA1" is unknown.
    The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 5 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: ONACTIONFETCH_VENDOR_DETAILS of program /1BCWDY/A8XPPCRFM5I0CTSGLFDT==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/A8XPPCRFM5I0CTSGLFDT==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
    Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
    Please help.

    Hi,
    I will ask this way, from where did you get list of parameters for this FM? Try using pattern to call this FM, than you will be proposed with correct interface.
    EDIT:
    After checking it in system you should switch IMPORTING and EXPORTING
    CALL FUNCTION 'WSRS_O_VENDOR_GET_DETAIL'
      EXPORTING
        PI_VENDOR_NO             = '99'
    *   PI_ACCEPT_NOTFOUND       =
    *   PI_PURCH_ORG             =
    *   PI_COMP_CODE             =
    IMPORTING
       PE_LFA1                  = lv
    *   PE_ADDR1                 =
    *   PE_ADRPRT                =
    *   PE_RETURN                =
    *   PE_LFM1                  =
    *   PE_LFB1                  =
    Best regards
    Marcin Cholewczuk
    Edited by: Marcin Cholewczuk on Apr 12, 2011 1:20 PM

  • ERM / composite role gener. / Function parameter "Authority_check" unknown

    Dear All GRC AC Women and Men,
    I have a problem to generate a composite role with sap grc ac erm. My GRC version is a 5.3 sp5
    For single roles, it s ok.
    For composite roles, I to a first generation in GRC AC ERM . The error  message is: "Function parameter "AUTHORITY_CHECK" is unknown."
    The role is generated in the back-end and the status in GRC AC ERM is "in progress" (Yellow colour).
    I do a second generation in GRC AC ERM, and the status is "done" (green colour); the role is generated one more time in the back-end.
    The message error in ERM logs is:
    "2010-03-18 15:48:48,393 [Thread-140] ERROR com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Function parameter "AUTHORITY_CHECK" is unknown.
    java.lang.Throwable: Function parameter "AUTHORITY_CHECK" is unknown.
         at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516)
         at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1514)
         at com.sap.mw.jco.JCO$Client.execute(JCO.java:3980)
         at com.sap.mw.jco.JCO$Client.execute(JCO.java:3417)
         at com.virsa.re.service.sap.dao.GenerateRoleDAO.generateRole(GenerateRoleDAO.java:564)
         at com.virsa.re.bo.impl.GenerateRoleBO.generateRoleAsBackGroundOnMultipleSystems(GenerateRoleBO.java:484)
         at com.virsa.re.backgroundjobs.RiskAnalysisAndRoleGeneration.execute(RiskAnalysisAndRoleGeneration.java:238)
         at com.virsa.service.backgroundjobs.BackgroundTask.run(BackgroundTask.java:53)
         at java.util.TimerThread.mainLoop(Timer.java:432)
         at java.util.TimerThread.run(Timer.java:382)"
    Do you know the origine of this problem? I am "quite" sure that it is not a back-end problem like authorisations missing for the user rfc (used in Jco).
    Best Regards,
    Ronan.

    Hi Ronan,
    This is an issue identified and resolved in SP07.
    Please refere to Note # 1290039 if you don't want to upgrade to SP07.
    Best Regards,
    Sirish Gullapalli.

  • Error during Transporting ID objects in PI 7.1

    Hello Experts,
    I am facing error during transportation of ID objects MY PI is 7.1 version In IR i have exported SWCV it generated .tpz file but in ID if am exporting it is throwing error
    Export failed:Internal error during pvc call:Parameter version Specifier or version has the invalid value null
    Please suggest me where would be the error any help is highly appreciated
    Regards
    Praveen

    HI,
    Problem is with all the folders in Integartion Directory while exporting objects from PI DEV it is throwing error like
    com.sap.aii.utilxi.misc.api.ResourceException: Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null
         at com.sap.aii.ib.server.transport.impl.utils.PvcUtils.throwRootCause(PvcUtils.java:86)
         at com.sap.aii.ib.server.transport.impl.utils.PvcUtils.createPropagationList(PvcUtils.java:58)
         at com.sap.aii.ibdir.server.transport.impl.service.DirTransportServiceSeImpl.createExportVersionset(DirTransportServiceSeImpl.java:98)
         at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.exportXiObjects(TransportServiceImpl.java:655)
         at com.sap.aii.ib.server.transport.TransportServiceBean.exportXiObjects(TransportServiceBean.java:317)
         at sun.reflect.GeneratedMethodAccessor2467.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:592)
    Regards
    Praveen
    Edited by: Maareddy Praveen Reddy on Nov 1, 2011 11:59 AM

  • Query on view cluster event trigger during transport

    Hi SAP Gurus,
    I would just like to ask if the subroutines set in events for view clusters would also get triggered upon transport.
    We had created a function module which is meant to regenerate a dynamic program when changes are made to a particular table.  We're planning to call this function module in a subroutine that is called during an event in the view cluster (set to "before saving the data to database").  However, we would also like for this dynamic program to be regenerated automatically once the table changes are transported to the test/prod systems.  Thus, I wondered if setting up the event is sufficient, and that it would also be triggered automatically prior to saving the changes to the database during transport, or if we still need to set up XPRA for this.
    Thanks!

    Some events are triggered when exportingthe changed data,
    - 10 After creating the change request header entries (E071)
    - 11 After changing a key entry in the change request (E071K)
    - 12 After changing the key entries in the change request (E071K)
    which are suitable to add a XPRA entry in the request
    But many events (AFAIK those without dialog) are triggered during import (and we can check if the program is called via transaction or import via flag VIM_IMPORT_MODE_ACTIVE, eg. do not execute a form which fill hidden fields like created by and created at.)
    Regards,
    Raymond

  • Shortdump during Transport (SE10)

    Hello together,
    I don't know, is this the right forum. I get a shortdump during transport my last work.
    The dump is for a CALL_FUNCTION_NOT_FOUND error.
    ST22 shows the following information:
    Function module "SSF_STATUS_INFO" not found.
    The function module "SSF_STATUS_INFO" was called, but cannot be     
    found in the Function Library.                                                                               
    The current ABAP/4 program "SAPLSTXBX " had to be terminated because
    one of the statements could not be executed.
    Has anyone an idea?

    please read note 556226.

  • Error printing Check - "Missing Parameter Values. Error During Printing"

    Dear friends,
    Our client is in SAP B1 8.81 Pl07 and is facing an error while printing checks designed in Crystal Reports. As soon as they click on "Print" button, we are getting an error "Missing Parameter Values. Error During Printing".
    We have checked the Crystal Reports and all the parameters are given.
    Can anyone help me regarding this?
    Thanks and regards,
    Bharath S

    hi,
    Quoted from Note 1555170
    1555170 - Error 'Missing parameter values' printing with CR layout
    Symptom
    When you print on add any stock transactions document, with Crystal report layout, you receive error message:'Missing parameter values' and then 'Error during the printing; ensure all parameters are defined'
    Step by Step scenario:
    1.Go to Administration / System Initialization / Print preferences and select the tab per document.
    2.Select the document stock transfer and tick the box print document when adding document and click on update.
    3.Go to stock management / stock transactions / stock transfer
    set the Crystal report template as default.
    Note:
    - The issue is reproduced also for Goods Receipt and Good Issue.
    - The issue is reporduced with any Crystal Report Template  for the     above documents.
    Cause
    Program error
    Solution
    This issue is candidate for a change in a future release of SAP Business One.
    Workarounds:
    1.Use PLD for printing the stock transactions.
    2.Convert the PLD layout to Crystal reports with Crystal converter.
    3.Print the document after adding it.
    Other terms
    sap business one, printing issues, good issue, good receipt, stock transfer, crystal report, print preferences, print when adding, dockey, missing parameter
    Header Data
    Released on     07.02.2011 13:27:30
    Release status     Released for Customer
    Component     SBO-REP-CR Crystal Reports 2008 for SAP Business One
    Other Components     
    SBO-GEN-PRT Printing Issues
    Priority     Correction with low priority
    Category     Program error
    Validity
    Software Component
    Version
    SAP BUSINESS ONE
    8.8
    8.81
    you can download the PLD to Crystal Converter [here|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/108305a7-1555-2d10-8289-9a178d441c71]
    regards,
    Fidel

  • Long DDIC Activation for Master Data Change During Transport

    Good Morning Folks,
    During transport of a change to a custom master data object to production, the data dictionary activation is taking a very long time and using a very large amount of space. 
    The change to the master data object was adding three additional navigational attributes. This master data is not time-dependant.  The master data contains about 1.2 million records and has 49 active navigational attributes u2013 including the three new ones.  The Data Dictionary activation is executing report SAPLRSDU for more than 8 hours and is using upwards of 52GB of temp filespace (of 92GB allocated) during this time.  To the best of our knowledge, it looks as if it is trying to recreate or repopulate the /BIC/Pxxxx table of the master data.   It looks like it's reading billions of records (probably the same 1.2 m records over and over.)
    There are no errors in any logs that we can see. 
    Previous changes to this master data object have been successful, and reasonably fast.  And the transport of this change from Dev to our QA environment was very fast.
    We still need to get this change in, as well as additional changes that are dependant.  Why would this take so long, and is there anything we can do to get this to run faster?
    BTW:  We are on 3.5 (but looking forward to NW7.)
    Thanks, Brian

    Brian,
    Usually adding nav attributes would mean that the X and y tables get regenerated...
    Also do you notice reads only on the P-Table or other tables which have this object as well..?
    If it is only the P Table - try refreshing the stats for the same...

  • Problem during transport

    Dear All,
    Now i meet a problem during transport my ABAP in dev to prod server. Not sure is BASIS or my problem.
    The error is "Request after end mark"
    One more question is for the transaction code STMS, the status for production server should be LOCK or IMPORT QUEUE IS OPEN? If it should be IMPORT QUEUE IS OPEN, how i going to do it cos now our status is LOCK?
    Thanks for ur help....
    regards;
    jee

    Hi,
    The "Request after end mark" will be displayed due to the following:
    Requests after the end mark are not imported during the next import. The end mark is automatically deleted only when the next import has completely ended. Afterwards, the requests can be imported. You can see the legend information in the following website:
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3847acc11d1899e0000e829fbbd/content.htm
    However, as per your questions I understand that the TMS configuration is not proper. Can you check the r3trans and the transport routes/layers again and see what is missing?

  • How to avoid hardcoding in RFC Lookup and JDBC Lookup during transport...

    Hi All,
      We have RFC and JDBC Lookups in some of our scenarios(JDBC to RFC synch)....Now problem is during transport of design objects, we have to change the business system and channel name manually in UDF in target environment....as it wont change although we define the target group in SLD.....we want to avoid this hardcoding.....one idea is we can use a business service inspite of business system and assign the comm channel to it.....this business service will be generic for all environment(dev,qua and prod)...and hence we dnt hav to hardcode....pls let me knw how to achieve or its possible or not....
    waiting for ur inputs....
    Regds,
    Pinangshuk.

    Hi,
    For RFC lookup you might be doing hardcoding for Business system and RFC channel name.
    Options are
    1) Create value mapping for Business system. So you can maintain it in Directory part.
    2) Keep the RFC channel name same for all system (Development, Quality, Production)
        The details of channel can be changed in the Directory part of the respective system

  • Can I pass a table function parameter like this?

    This works. Notice I am passing the required table function parameter using the declared variable.
    DECLARE @Date DATE = '2014-02-21'
    SELECT
    h.*, i.SomeColumn
    FROM SomeTable h
    LEFT OUTER JOIN SomeTableFunction(@Date) I ON i.ID = h.ID
    WHERE h.SomeDate = @Date
    But I guess you can't do this?... because I'm getting an error saying h.SomeDate cannot be bound. Notice in this one, I am attempting to pass in the table function parameter from the SomeTable it is joined to by ID.
    DECLARE @Date DATE = '2014-02-21'
    SELECT
    h.*, i.SomeColumn
    FROM SomeTable h
    LEFT OUTER JOIN SomeTableFunction(h.SomeDate) I ON i.ID = h.ID
    WHERE h.SomeDate = @Date

    Hi
    NO you cant pass a table function parameter like this?
    As When you declare @date assign value to it and pass as a parameter it will return table which you can use for join as you did it in first code 
    But when you pass date from some other table for generating table from your funtion it doesnt have date as it is not available there
    Ref :
    http://www.codeproject.com/Articles/167399/Using-Table-Valued-Functions-in-SQL-Server
    http://technet.microsoft.com/en-us/library/aa214485(v=sql.80).aspx
    http://msdn.microsoft.com/en-us/library/ms186755.aspx
    https://www.simple-talk.com/sql/t-sql-programming/sql-server-functions-the-basics/
    http://www.sqlteam.com/article/intro-to-user-defined-functions-updated
    Mark
    as answer if you find it useful
    Shridhar J Joshi Thanks a lot

  • How to invoice costs when damage occurs during transportation

    Hi,
    If there is damage during transportation such as loss, accident..., we have to create an invoice to the shipping company with a cost based on the weight of the damaged product for insurance purposes.
    Have you ideas to set up this process in SD 4.7 because we want a link between the delivery or the order and the invoice created for damage.
    Thanks
    Jean Luc

    Hi Jean,
    When the goods get back to the warehouse, we treat this process in Returns which u r quite aware.
    You can use the below scenario.
    Say, the customer did not return the goods back may b bcause of the cost of sending the goods back involves more money in such a case he informs the business abt the damage of goods. in such scenerios we create a credit memo request w.r.t invoice then we give credit note(invoice) here no returns delivery is required as we have nt received any goods physically from the customer.

  • How to pass "EnterpriseManagementObject" Type as Function parameter?

    Hello, dear Colleagues.
    I'm trying to  pass "EnterpriseManagementObject" as Function parameter.
    Here is the piece of code:
    $SCSM = 'SERVER_NAME'
    function Add-Comment {
    param (
    [parameter(Mandatory=$true,Position=0)][Alias('Id')][String]$pSRId,
    [parameter(Mandatory=$true,Position=1)][Alias('Comment')][String]$pComment,
    [parameter(Mandatory=$true,Position=2)][Alias('EnteredBy')][String]$pEnteredBy,
    [parameter(Mandatory=$true,Position=3)][Alias('IsAnalyst')][Bool]$AnalystComment,
    [parameter(Mandatory=$true,Position=4)][Alias('IRObject')][EnterpriseManagementObject]$IRObject
    if ($IRObject) {
    $NewGUID = ([guid]::NewGuid()).ToString()
    if ($AnalystComment)
    $Projection = @{__CLASS = "System.WorkItem.Incident";
    __SEED = $IRObject;
    AnalystComments = @{__CLASS = "System.WorkItem.TroubleTicket.AnalystCommentLog";
    __OBJECT = @{"Id" = $NewGUID;
    Comment = $pComment;
    DisplayName = $NewGUID;
    EnteredBy = $pEnteredBy;
    EnteredDate = (Get-Date).ToUniversalTime();
    IsPrivate = $false
    New-SCSMObjectProjection -Type System.WorkItem.IncidentPortalProjection -Projection $Projection -ComputerName $SCSM -ErrorAction stop
    } else {
    Write-Host $pSRId "could not be found"
    $IncidentClass = Get-SCSMClass -name System.WorkItem.Incident$ -ComputerName $SCSM
    $Incident = Get-SCSMObject -Class $IncidentClass -Filter "name -eq $c" -ComputerName $SCSM
    Add-Comment -Id $c -Comment $text -EnteredBy $name -IsAnalyst $False -IRObject $Incident -ErrorAction stop
    With GetType() I watched $Incident is "EnterpriseManagementObject":
    IsPublic IsSerial Name BaseType
    True True EnterpriseManagementObject Microsoft.EnterpriseManagement.Common.EnterpriseManagementObjectBaseWithProperties
    But PS script returns error TypeNotFound:
    Add-Comment : Unable to find type [EnterpriseManagementObject]. Make sure that the assembly that contains this type is loaded.
    At C:\script.ps1:146 char:13
    + Add-Comment -Id $c -Comment $text -EnteredBy $name -IsAnalyst $True ...
    + ~~~~~~~~~~~
    + CategoryInfo : InvalidOperation: (EnterpriseManagementObject:TypeName) [], RuntimeException
    + FullyQualifiedErrorId : TypeNotFound
    Is there a way to  pass "EnterpriseManagementObject" as Function parameter?
    Thanks.

    First of all the error indicates that you haven't loaded the assembly which contains the class you're trying to load.
    Try loading the assembly by running:
    [Reflection.Assembly]::LoadWithPartialName("Microsoft.EnterpriseManagement.Core") | Out-Null
    Secondly if you want to use type based parameters restrictions you should use full type name, which can be found with the command:
    $SomeObject.GetType().FullName
    You should end up with: Microsoft.EnterpriseManagement.Common.EnterpriseManagementObject

  • TABLE VALUED FUNCTION - PARAMETER NOT WORK

    This is the code i have written
    CREATE FUNCTION GETSQL_GL5203(@FORPERIOD AS CHAR)
    RETURNS TABLE
    AS
    RETURN 
    SELECT-- TOP 1000
     --[GLBranch]
         -- ,[accountno]
     glbranch+ '-'+ accountno AS EMBACC
          ,[PERIOD]
          ,[TOTALBAL]
      FROM [EmbraceData].[dbo].[GLbybranchPERIODBAL  ]
      WHERE LEFT(GLBRANCH,2) <> 'TC'
      AND SUBSTRING (GLBRANCH,3,2) <> '00'
      AND [PERIOD] <> @FORPERIOD --'2015-03' 
    --  ORDER BY GLBRANCH
     -- ,ACCOUNTNO--
      --,[PERIOD]
      GO
    when i call the function  as below it is giving me all the information and ignoring the period selection.   When i am running just the body of the query using '2015-03' as the value on the period it is working fine.
      SELECT * FROM GETSQL_GL5203 ('2015-03') AS LIVE

    You need to provide the size for your function parameter
    Try the below:
    CREATE FUNCTION GETSQL_GL5203(@FORPERIOD AS
    CHAR(20))
    RETURNS TABLE
    AS
    RETURN 
    SELECT-- TOP 1000
     --[GLBranch]
         -- ,[accountno]
     glbranch+ '-'+ accountno AS EMBACC
          ,[PERIOD]
          ,[TOTALBAL]
      FROM [EmbraceData].[dbo].[GLbybranchPERIODBAL  ]
      WHERE LEFT(GLBRANCH,2) <> 'TC'
      AND SUBSTRING (GLBRANCH,3,2) <> '00'
      AND [PERIOD] <> @FORPERIOD --'2015-03' 
    --  ORDER BY GLBRANCH
     -- ,ACCOUNTNO--
      --,[PERIOD]
      GO

  • Error during transport of info object

    Dear all,
    We are using BI7.0 During transport of the infoobject "0MAINTPOS" the following error is appearing.
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
       Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
       Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
    Can anyone tell what has to be done to get this error solved.
    Regards,
    M.Magesh

    MM,
    Please refer
    Re: inactive info objects in BI Content
    Re: Unit no allowed in compounding
    Hope it helps.

Maybe you are looking for