Functional User training for 11.0.3

We have an interesting problem that I am sure someone else has run up against as well.
Our client's corporate headquarters is on Applications 11.0.3. The regional site has been ordered to start using the 11.0.3 system to assist corporate in AP, AR, GL, PO, Order Entry, Shipping... They have no previous experience with Oracle Applications.
After a review of Oracle web site(s) I have these questions: 1) Is there still 11.0.3 training available? 2) Is the 11i training that is so plentiful in any way applicable to 11.0.3? They appear to be caught in the middle and don't want to spend a lot on 11.0.3 training that my become obsolete if corporate upgrades to 11i. But on the other hand, an 11i upgrade is undecided but for the immediate future so they must quickly learn how to use 11.0.3.
Any comments or suggestions on a training path for the folks?

Thanks for the reply Hussein ....i thought you are absent today :( huhuhuhu
By the way I was asking if there is diagnostic tool for 11.0.3.
You know we are going to copy the setup of Apps 11.0.3 on WinNT to 11.5.10.2 on Aix.
My boss ask me to look for the diagnostic tool becuase it will be easier to copy the setup.
So yo u mean It doesnt have one? :(
Is there any other way to copy the setup?

Similar Messages

User Training Material for Bonus Buys

Hi Guys
Has anyone got any useful user training material for working with Bonus Buy functionality.
Thanks
Brett

Hi Brett,
you can find some training material for Bonus Buy in the SAP for Retail course 'IRT320 Pricing, Promotions and Markdowns', in the chapter about retail promotions.
Regards
Rita

Role of SAP Functional & Basis Consultant for any new authoirzation/user ID in Support Phase

Dear Expert,
Please let us know what is standard /best practice for below activities in SAP Support phase?
Who will responsible for Authorization Matrix?
Who will be first point of contact (Functional / Basis Consultant) to SAP user for any new authorization request?
Who will do the testing & impact analysis of new authorization?
If we provide any new SAP transaction code to the end user & user is facing authorization object issue then who will be first point of contact for user Functional / Basis Consultant?
Also who will be fist point of contact (Functional / Basis Consultant) for new User ID creation request?
In our current practice Functional consultant is dealing with end user. He is taking requirement of new Report/Transaction access request & doing analysis. Then he is taking approval from BPO & based on BPO approval Functional consultant is providing training to end user. When end user is accepted requested report requirement in standard report or transaction data process then Functional consultant is sending request to Basis consultant along with authorization parameters like Role, Organization parameters, type of activity (create/change/display/delete) etc.
Our Basis consultant is not agreeing for this process & he want to directly deal with end user for all activities & he will take help of Functional consultant if required.
Sorry friends this is not technical discussion but it is create big dispute between our internal support team regarding who will be first point of contact for any authorization related issue?
Regards / Aviya.

Dear Aviya Paul,
1. Who will responsible for Authorization Matrix?
Authorization Matrix that define "what position may have access to which authorization/ role" shall be developed by User (Management), with support from BASIS. User is the one who have the authority to decide, while BASIS should help User in understanding the technical knowledge of access authorization.
2 to 5. BASIS.

User defined function in java for message mapping

I wrote the following user defined function in java for message mapping and mapped vendor with this. The aim of this function is to write a error file at defined path when i send empty Vendor value from File to RFC-Function module BAPI_PO_CREATE. The "err.txt" error file is not written when i execute in TEST but the value "ERROR" is returned to destination Vendor Field.
public String validation(String a, Container container) {
//write your code here
if (a.equals("")) {
try {
String source = "Vendor cannot be empty";
char buffer[] = new char[source.length()];
source.getChars(0, source.length(), buffer, 0);
for (int i = 0; i < buffer.length; i +=2)
f0.write(buffer<i>);
f0.close();
FileWriter f1 = new FileWriter("/10.10.0.55/sapmnt/trans/edixiin/err.txt");
f1.write(buffer);
f1.close();
catch (IOException e) {}
return "ERROR";

Hi Senthil,
Check these things :
1) Whether you have permission to create a file in that directory.
2) try giving this
10.10.0.55
sapmnt
trans
edixiin
err.txt
3) Also check for permissions.
Hope this will help you.
Regards
Suraj

User exit for ME21N (Not functional or customer exit)

Hi Guys,
I want to get a user exit for PO as my requirement is to call custom screen before the PO is getting saved.
I have the functional exits and badi's list which will not fulfill my requirement as because on my custom screen i have cancel button.
On clicking the control needs to come back to the me21n second screen with the data entered with out order getting created.
The screen number for the second screen in ME21N is 14.
if i call screen 14 it will work in a user exit where as in customer exit(functional exit) we have limitations with the exporting and importing as so the screen number will not be recognised.
I am able to do the same calling of cust screen in Sales order creation and is sucessfull, the same should happen with PO also.
Probably if the user exit triggers at the time of syntax check i can achive my requirement rather than at save as the call back to the screen will not harm and database commits will not take place.
I also tried with all most of the enahancement points but the call screen statement is not working at any point of time which worked with Sales order exits. So i tried with making the validation fail but still by that time the PO number is getting generated and so if i try to cancel the PO before save and trying to get PO in edit mode but the sequence number is getting missed by by 1.
Please help.
Regards,
Amar.
Edited by: amar srinivas on Feb 11, 2011 10:16 AM
Edited by: amar srinivas on Feb 14, 2011 4:56 PM

Hi,
You can try it this way.
Check badi ME_PROCESS_PO_CUST , method - CHECK.
This badi/method gets triggered when the "CHeck" button and "SAVE" button is pressed.
It consists of a changing parameter CH_FAILED . Pass X to it when cancel button is hit in your custom screen.
Donot use any commit in this method. Read the documentation before doing it.

End user training guide for FI/CO

Hi!
Can any one send me end user training guide for FI/CO in ppt presentation.
thanks & regards,
RAemsh B

Hi:
Refer to SAP Best Pratices.In this you will Business Process procedure. You can use that end user training guide for FI/CO
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
Refer to SAP Accounts Receivable documentation.
web.mit.edu/cao/www/AR/index.html
Additionally type the t.code in google.com.
Ex: SAP F-02 in google.com.You may find the user manuals.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

BR0252E Function fopen() failed for '/oracle/SID/sapbackup/.user.pas' at location BrToolCall-2

Hi all,
I am working on setting up the DB13/BRTOOLS integration.
I am trying to run a db check from sidadm user through brtools and getting the below error.
BR0280I BRTOOLS time stamp: 2014-04-24 09.35.56
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/PB1/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
I changed the permissions for br* to 755 as below
but still I am getting the same error.
ustrlxpb1db80:pb1adm 73> ls -l br*
-rwxr-xr-x 1 pb1adm sapsys 5736689 Sep 7 2011 brarchive
-rwxr-xr-x 1 pb1adm sapsys 5854578 Sep 7 2011 brbackup
-rwxr-xr-x 1 pb1adm sapsys 7577045 Sep 7 2011 brconnect
-rwxr-xr-x 1 pb1adm sapsys 6279708 Sep 7 2011 brrecover
-rwxr-xr-x 1 pb1adm sapsys 2227868 Sep 2 2011 brrestore
-rwxr-xr-x 1 pb1adm sapsys 8033945 Sep 7 2011 brspace
-rwxr-xr-x 1 pb1adm sapsys 3090793 Sep 2 2011 brtools
What might be the issue?
Thanks
vimal

Hi Gaurav,
Thanks for your information.
I changed the persmissions for sapbackup and sapcheck to 775 and I can able to start the dbcheck via brtools through sidadm user.
But it got stuck with a below sql error , with insufficient privileges
BR0280I BRTOOLS time stamp: 2014-04-24 10.36.06
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0801I BRCONNECT 7.20 (17)
BR0805I Start of BRCONNECT processing: censafis.chk 2014-04-24 10.36.06
BR0484I BRCONNECT log file: /oracle/PB1/sapcheck/censafis.chk
BR0477I Oracle pfile /oracle/PB1/112_64/dbs/initPB1.ora created from spfile /oracle/PB1/112_64/dbs/spfilePB1.ora
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.08
BR0813I Schema owners found in database PB1:
APPQOSSYS, DBSNMP, DIP, OPS$ORAPB1, OPS$PB1ADM, OPS$SAPSERVICEPB1, ORACLE_OCM, OUTLN, SAPSR3*, SYS,
SYSTEM
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.09
BR0814I Number of tables/partitions in schema of owner SAPSR3: 25128/247
BR0836I Number of tables treated as info cubes for owner SAPSR3: 1676
BR0814I Number of tables/partitions in schema of owner SYS: 890/298
BR0814I Number of tables/partitions in schema of owner SYSTEM: 151/39
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.12
BR0815I Number of indexes/partitions in schema of owner SAPSR3: 33103/502
BR0815I Number of indexes/partitions in schema of owner SYS: 965/242
BR0815I Number of indexes/partitions in schema of owner SYSTEM: 212/52
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0816I Number of segments in schema of owner DBSNMP: 8
BR0816I Number of segments in schema of owner OPS$PB1ADM: 1
BR0816I Number of segments in schema of owner OUTLN: 9
BR0816I Number of segments/LOBs in schema of owner SAPSR3: 21553/2395
BR0816I Number of segments/LOBs in schema of owner SYS: 2714/144
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 407/22
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0961I Number of conditions found in DBCHECKORA: 128
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDER BY OBJNAME'
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: censafis.chk 2014-04-24 10.36.13
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0804I BRCONNECT terminated with errors
BR0292I Execution of BRCONNECT finished with return code 3
Thanks
Vimal

User presets for copy/paste function.

User presets for copy/paste function?
During an edit session, I am constantly switching to, and from copying: crop (only), and copying everything except "local adjustments" and "basic tone". I use a few other combinations as well. Switching between these involve a lot of tedious (& error prone) checking and unchecking of boxes. A preset option of some sort would help here.
What I do is edit one photo (in a string of similar photos), then copy it. Then select similar photos and auto sync them with the paste command, In an action sequence, the crop often needs to be done separate. Also the lens profile & calibration needs to be pasted separate if I happened to be switching between two camera/lenses.

Hi Per,
The below article will be helpful
Copy And Paste Data Between Excel Sheets Does Not Work When Smart View Add-In Enabled (Doc ID 1313584.1)
Thank you,
Charles Babu J

USER Hook for Changer Manager function

Dear All,
I need to know that is there any user hook for Manager Self Service -- Change Manager function for employee.
If yes then please give me the module name/id for the user hook.
If no then how can I set custom validations on this page.
Regards.

You should look for the update assignment api.
select * from hr_api_modules
where module_name like '%UPDATE%ASG%'
Depending on the legislation, you will have different modules/packages/procedures.

User exit for Function Module

Hi,
I have a Exit function module EXIT_SAPLCVV1_003. i wrote my code in the include and i dont know how to activate it in CMOD. i dont have the user exit name. can anyone tell me how to find user exit for function module.
Regards

hi
you should find the enhancement name for your function module exit.
go to CMOD Utilities->SAP Enhancement->extended selection->
give the program name(SAPLCVV1) in Component name field and execute.
it will display the enhancement name.Afterwards u should create the enhancement project.
Steps to create enhancement Project:
1.Goto CMOD.
2.Give project name.->Create
3.Assign the enhancement using the option.
4.select Components and choose change.go to ur code and activate.
5.activate the exit
6.activate the enhancement.
Cheers,
Abdul Hakim
mark all useful answers..

Time management PPT for end user training

Hi Gurus
Can any one send me this end user training PPT
Regards

Hi
as per my knowledge thers is no standard template doc wrt time management User manual
its document with screen shots with pointers and their details How to maintain( create, Change, Dispaly, delete, Overview) of the infotypes in a easy way to understand the poress of time management in End user prospective.
with following Screen shots
Planned Working Time
Attaedance
Absences
Substitutions
Genration of absence quota
Time Recording Info
Holiday calender Manitenance
Adding/Deleting/Changing a holiday calender
generaion of WOrkschedule after change in Holiday calender
Fast Entry of time data PA71
Time Evaluation
Hope this will help you
reagrds,
SriC
Edited by: Srinivasa Chakravarthy on Oct 20, 2008 4:47 PM
Edited by: Srinivasa Chakravarthy on Oct 20, 2008 4:47 PM

User statuses for equipment,functional location,order,notification

Kindly suggest me which user statuses should be assigned to equipment,func. location,notification & order.
Regards,
Vivek

Vivek,
There is no rule or std instruction which user status to be assinged to equipment,FL, Notification or order. In std you may get some user status for equipment. notification etc. It doesnt mean that you should use it. User status are define /created base on the business requirement . a user status can be assigned to multiple object type such as equipment, notification ,order etc.
You can refer the std user status profile when you create your own. In order to know the detail of it object type. You can select the status profile >> click on the detail>> click on the object types.
Hope it is helpful to you.
if you want further detail please revert.
DP

Regarding Project Preparation , Requiremnts Gathering, User Training

Hai
Please send the documents for Project Preparation , Requirments Gathering, User Training Urgently to [email protected]
regards
andrea

Hi Andreas ,
The BW Project guidelines can be as follows ,
Stages in BW project
1 Project Preparation / Requirement Gathering
2 Business Blueprint
3 Realization
4 Final Preparation
5 GO Live & Support
Project Preparation / Requirement Gathering
Collect requirement thru interviews with Business teams /Core users / Information Leaders .
Study & analyze KPI 's (key figures) of Business process .
Identify the measurement criteria's (Characteristics).
Understand the Drill down requirements if any.
Understand the Business process data flow if any .
Identify the needs for data staging layers in BW (i.e need for ODS if any)
Understand the system landscape .
Prepare Final Requirements Documents in the form of Functional Specifications containing :
Report Owners,
Data flow ,
KPIs ,
measurement criterias,
Report format along with drilldown requirements .
2 Business Blueprint
Check Business content against the requirements
Check for appropriate
Info Objects - Key figures & Characters
Check for Info cubes / ODS
Check for data sources & identify fields in source system
Identify Master data
document all the information in a file follow standard templates
Prepare final solution
Identify differences (Gaps) between Business Content & Functional
specification. propose new solutions/Developments & changes if required at different levels such as Info Objects ,Info cube , Data source etc . Document the gaps & respective solutions proposed follow standard templates
Design & Documentation
Design the ERD & MDM diagrams for each cube & related objects
Design the primary keys/data fields for intermediate Storage in ODS
Design the Data flow charts right from data source up to Cube .
Consider the performance parameters while designing data models
Prepare High level / Low level design documents for each data model.--- follow standard templates
Identify the Roles & Authorizations required and Document it follow standard templates
final review of design with core BW users .
Sign off the BBP documents
3 Realization
Check & Apply Latest Patches/Packages ...in BW & R/3 systems.
Activate/Build & enhance the cubes/ODS as per data model designs...maintain the version documents .
Identify & activate Info objects / Master data info sources / attributes ,prepare update rules
Assign data sources .prepare transfer rules , prepare multi providers . prepare Info packages .
perform the unit testing for data loads.both for master data & transaction data .
develop & test the end user queries .
Design the process chains ,schedule & test
create authorizations / Roles assign to users ..and test
Apply necessary patches & Notes if any .
freeze & release the final objects to quality systems
perform quality tests .
Re design if required . (document changes, maintain versions)
4 Final Preparation
Prepare the final check list of objects to be released .identify the dependencies & sequence of release
perform Go Live checks as recommended by SAP in production system
keep up to date Patch Levels in Production system
Test for production scenarios in a pre-production system which is a replica of production system .
Do not Encourage the changes at this stage .
freeze the objects .
5 GO Live & Support
keep up to date Patch Levels
Release the objects to production system
Run the set ups in R/3 source system & Initialize Loads in BW
Schedule Batch jobs in R/3 system (Delta loads)
schedule the process chains in BW .
Performance tuning on going activity
Enhancements - if any
You can get some detailed information in the following link.
http://sap.ittoolbox.com/documents/document.asp?i=3581
Try to go to ASAP implementation roadmap.
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
Check the links below that gives you brief overview of the above steps .
https://websmp201.sap-ag.de/asap
http://www.geocities.com/santosh_karkhanis/ASAP/
ASAP
https://websmp201.sap-ag.de/asap
http://www.geocities.com/santosh_karkhanis/ASAP/
https://service.sap.com/roadmaps
https://websmp104.sap-ag.de/bi
***Please reward if useful.**
Hope these links helps you.
Regards
CSM Reddy

GL Account User Exit for all FI transactions

Hi Experts,
We have to create a Ztable and it stores GL bank account principal amount.
Ex: 130121 (SCB Bank) - Rs.10,00,000.00
In SAP , for the same GL account closing balances will available in FS10N of each month.
Ex: 130121 (SCB Bank) for Sep'09 - Rs.8,50,000.00
Now, the requirement is..
I want to put an User Exit for this Bank GL Account . It has to perform a check operation whenever this GL accounts comes for posting on any FI transactions, and
it'll check each time to the GL account principal balances(from Ztable) with the posting amounts and give a popup message regarding about the bank limits exceeded, remainaing amounts and then only they can able to post the transactions.
Ex: If they are posting in F-02 (general ledger posting) the amount showing in GL account which go for my user exit calculations everytime and the same will be for all other FI GL transactions.
Hope u understood else pls let me know by your replies.
Pls advise.
thanks & regards
sankar.

Hi..
In the tcode where u want to put the user exit, In the menu select System--> Status and double click on the program.
Then click on search and give the search term as "call-customer function".. and see if there are any available user exits..
Select one, and double click on the 3 number..if '003' ,double click on it,it will take u to the Fm..where u will find an include starting with Z.
Here u can write the code u want.
Regards,
Vishwa.

User Authentication for subfolder not working in Web Browser

We are using Oracle Application Server 10.1.2.3 and Database Server 10.2.0.5 for our application.
One of the functionalities of the Application is to send emails with attachments.
The logic is that the Application would generate the attachment file on the Application Server.
Then a database package uses Oracle's utl_http package/procedures(more specifically utl_http.request_pieces where the single argument is a URL) to pick up the file from the Application Server via URL, attach the file and send the email.
Exchange and Relay Server is also set in the Application.
The problem is that the folder containing the folder which stores the attachments is having user authentication set.
Example : The main folder is /apps/interface, this folder requires a valid user when it is accessed via URL on a web browser.
Alias created in httpd.conf
Alias /int-dir/ "/apps/interface/"
The folder /apps/interface/email/ is the folder where the attachment files are generated and stored.
Application Server : 10.12.213.21
Database Server : 10.12.213.22
Email Server : 10.12.213.44
Configuration as per httpd.conf
Alias /int-dir/ "/apps/interface/"
<Location /int-dir/>
AuthName "Interface folder"
AuthType Basic
AuthUserFile "/u01/app/oracle/as10g/oasmid/Apache/Apache/conf/.htpasswd"
require user scott
</Location>
<Location /int-dir/email>
Options Indexes Multiviews IncludesNoExec
     Order deny,allow
     Deny from all
     Allow from 10.12.213.21
     Allow from 10.12.213.22
     Allow from 10.12.213.44
</Location>
Using the above configuration the Application is able to attach the files and send the email, however, when we access the following URL :
http://10.12.213.21:7778/int-dir/ - it prompts for user authentication
However if we use the following URL :
http://10.12.213.21:7778/int-dir/email/ - it does not prompt for user authentication, and all the files in the folder are displayed in the browser.
I have tried so many things including AllowOverride, .htaccess, but i am not able to get user authentication for the email folder.
Please help me if you can.
Thanking you in advance,
GLad to give any more information that i can.
dxbrocky

Thanks for your response. I fixed the problem by selecting "full site" or "full website" at bottom of the web page. After making this selection the zoom function returned. Thanks again for your interest.

Functional User training for 11.0.3

Similar Messages

Maybe you are looking for