Functionality of Table -- TFAVW
I need your one help. We have one table TFAVW. Its a standrad table and having worklist realted with customer payment. Actually i dont know whats the use of this table. whats functionality behind this table.
Hi
'Worklist' is like a group of values like cost element group / set.
This you can use it while selecting the reports.
Using the TCODE:OB55, you can create the work list for the COMPANY CODE, VENDOR , CUSTOMER & GL ACCOUNTS.
Create the worklist.
If you see in TCODE: FS10N, there you can see the 'Activate Worklist', if you click on that you will get an option of the worklist, give the work list and execute the report.
SKS
Similar Messages
-
What are the functions of tables in ods
Hi,
what are the functions of tables in ods.
new data table
change log table
active data table.
How 0recordmode work with these 3 tables.
and how sid will work with ods?
can anyone give detailed explanation.
please do not give sap help links.
Thanks,
madhu
ThanksHi,
new table holds the "new" loaded data in ODS. If you start a new request to load data in your ODS, it firstgoes to table new data. Then you normally activate data either manually or by process chain. Then the daa will be copied over from new to active table. The change log table holds the delta information, what will change during activation or which records will be overwritten with new data or which data is new at all.
With recordmode you can specify which update mode will be used or more excalty which delta mode will be used. SID is necessary for master data, because ODS will only hold the SID values of the used characteristivcs and not the characteristic values itselfs. It's part of normalization used in BI.
For more details I recommend to look here in SDN, go to a class or read help.sap.com pages.
Regards,
Juergen -
How to get value in function insert table test ?
Hi
I use function insert table test in order to get value in table for use in code page but i don't know how to get value in table.If somebody have any idea.Please give me some advice.
Thank you,
WarujaYou will need to grab the contents with VBA
Table test is user interface only.
This thread may help
http://qazone.empirix.com/thread.jspa?threadID=748&tstart=0 -
To know the functionality of table control in ABAP Objects
Hi,
Is there any technique to achieve the functionality of table conrol in ABAP Objects?
Thanks.Hello Raja
If you are using an editable ALV grid then you have the functionality of a table control and much much more.
ABAP-OO based ALV grids are much more powerful (and easier) than simple table controls.
Regards
Uwe -
"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16
While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple -
How to implement "SelectAll" function in table view?
hi, experts
i want to implement "SelectAll" function in table view, just like the SelectAll function in ALV,how to do?
and, can table view has it's tool bar ,may be on top of it.
pls help and thanks a lot!!Search this forum. You will find plenty of threads on the same...
Raja -
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 37000 code: 8180 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared.. [nQSError: 16001] ODBC error state: 37000 code: 1033 message: [Microsoft][ODBC SQL Server Driver][SQL Server]The ORDER BY clause is invalid in views, inline functions, derived tables, subqueries, and common table expressions, unless TOP or FOR XML is also specified.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
I have already tried to follow this thread below, but no change.
HI
In this specific report ran above the offending sql uses a CTE.
I am on 11.1.1.6.1, Windows Server 2008
Currently in testing phase in migration from 10g.
I know what the error means, just not how to resolve it or what setting may be causing this.In Physical layer, go to specific database(Physical layer's) properties, database features tab -> Un check the EXPRESSION_IN_ORDERBY_SUPPORTED.
For that failed report, go to Answers-> advance tab-> Look for 'Advanced SQL Clauses'
Check this box to issue an explicit Select Distinct
Let me know updates
If helps Pls mark correct or helpful -
How to migrate sql server 2000 user defined function returns table
Hi,
How do I capture the SQL Server 200 user defined function that returns table? Is this supported in the current version of Oracle Migration Workbench? I am using the latest version - Release 9.2.0.1.0 with SQL SERVER 2000 plug-in.
I was able to capture the SQL Server 2000 user defined function that returns string and smalldatetime but not the functions return table during the migrate data source stage.
Thanks in Advance,
SusanSusan,
This is not currently supported. The next release of the Oracle Migration Workbench (due very soon), will do a better job of catching this mad reporting an error. We are looking into a suitable mapping and have created bug # 2355073 - TABLE DEFINITIONS NOT ACCEPTED FOR TABLE FUNCTIONS to track this issue.
Once possible solution we are looking into is using the object type to emulate. Here is an example from the bug:
Original table
SQL> create table tabela (a number, b number, c number, d number);
SQL> insert some values...
SQL> select * from tabela;
A B C D
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
SQL Server 2000 code
CREATE FUNCTION FUNCRETORNATABELA()
RETURNS TABLE
AS
RETURN SELECT A,B,C,D FROM TABELA
SELECT A,B,C,D
FROM FUNCRETORNATABELA()
ORDER BY A
Oracle code (workaround)
SQL> create or replace type MyObjType as object (
2 a number, b number, c number, d number);
3 /
Type created.
SQL> create or replace type MyTabType as table of MyObjType;
2 /
Type created.
SQL> create or replace function teste return Mytabtype pipelined as
2 aa MyObjType := MyObjType(null, null, null, null);
3 cursor c1 is select a,b,c,d from tabela;
4 begin
5 open c1;
6 loop
7 fetch c1 into aa.a, aa.b, aa.c, aa.d;
8 exit when c1%NOTFOUND;
9 pipe row (aa);
10 end loop;
11 close c1;
12 return;
13 end;
14 /
Function created.
SQL> select * from table(teste);
A B C D
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
SQL> select a, c from table(teste) order by c desc;
A C
4 4
3 3
2 2
1 1
Donal -
Hello,
I am a novice with respect to spreadsheet functions and needed a a cashflow spreadsheet. I found this one (Download Cashflow Tracker for Numbers (iWork 09).) which is perfect but the author, I suspect, has not updated his website in years. I attempted contacting him and received no reply.
I receive an error with the following function:
=SUMIF(Table 1::$Month, COLUMN()−1, $Cost)
This occurs when I enter a date in the expense or income table. Entering the date is required to make the spreadsheet work but when I do I receive an error that a number is expected when a date is entered.
Can anyone give me some advice? I would really like to use this spreadsheet.
Thanks!
SteveWhat I have found the simplest approach has been:
1. Cut the Summary by Category table and paste it into the Transaction sheet, giving something like this (after rearranging renaming, etc, as desired):
2. Make sure the links between the two table are still working, make their appearance the way you like, then duplicate that sheet for the other months. Each sheet will then have its separate set of two interconnected tables.
3. Copy paste one of the Summary tables back to the Summary sheet, rename it as desired, and set it up with formulas referencing the tables in the monthly sheets you have set up, something like this:
If you want your summary by month you would set up 12 columns in the main 'Summary by Category' table, with each column referencing a different sheet. Your Budget could be a row above each Actual figure, if you like, with difference in a row below that.
This approach keeps the formulas simple and avoids having to set up fancy SUMIFS extracting data for each month from one big Transaction table.
SG -
Hi All,
i created one enchancement to ME21n screen,
i added one screen at header
When i running the the transaction ME41 it shows the following error.
This function not defined
Message no. 06006
Diagnosis
There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.
Procedure
Contact your system administrator.
Am i need to add this functionalty to any sap table.
plz guide me on this.Hi Krishna
Have you added any buttons in the custom screen if yes then you will have to maintain configuration data for Function code processing.
Please search on SCN for the same
Nabheet -
The retrieval function of Table
Hi,
The method is not understood though I want to apply
the retrieval function to Table.
Could you teach the method of putting the retrieval function on Table?
If the sample code etc. can be obtained if possible,
I am glad.
My best regards.Hello BESS,
// Iterate through the table node
int size = wdContext.node<nodeName>.size();
for (int i = 0 ; i < size ; i++ )
IPrivate<viewName>.I<nodeName>Element element =
wdContext.node<nodeName>().get<nodeName>ElementAt(i);
* Get the values from each row
element.get<attributeName1> ;
element.get<attributeName2> ;
Balakrishnan -
What is the main function of table S866
Hi all,
Does anybody know the function of table S866?
Regards,
LukeDear Julius,
These Evaluations/ Evaluation structure will be used only for LIS Reportings , like Report Painters/writers Of FI. Generaly we use these Evalucations for Flexible Analyses of S&D.
by using Where_userd list we cannt find out its usage.
Thanks and Regards
Prabhu -
MB01 is giving error:No entry for partner function '' in table TPAR
MB01 is giving below error when i am trying to trigger ALE idocs using output type 'ZWE2'
Error:'No entry for partner function '' in table TPAR'.
I am unable to find what could be the above error and how to rectify.
Any help in this regard would be appreciated.
Thanks!There is a partner function code for which there is no configuration data in TPAR. What is the partner function? Can you find that and verify that it is correct, or correct it to a value that is configured in TPAR?
-
Function Module TABLES parameters
Hi All,
I want to pass my internal table to a function module but when I try to access the componenbts of the table it is giving me syntax error. Is it required that I should create DDIC structure for this? Is there any other option?
I have declared the internal table using types. And in function module tables parameters just declared internal table.
Regards,
DilipHi
In the function
Say import parameter is TAB ( with no type definition )
From program you pass an internal table ITAB .
You don't need to define TAB in your function.
In the code you can diretcly use
LOOP AT TAB.
ENDLOOP.
( At runtime TAB will take the structure of ITAB from program )
Cheers -
Functional module table parameters values not getting displayed in Java sys
Hi,
We are calling the Table parameter through Java code from functional
module ZCRM_ICSS_PROJ_CUST_USR is not giving any rows value .If I execute
the same functional module with passing the import parameter value User
id: MLDL010 its giving value in CRM.
I am checking Function module( Remote enabled ) in Debugging mode,
before displaying values it is raising message like
SY-MSGNR - 005
SY-MSGTY - CRM_LINK
in T100 Table
SPRSL : EN
ARBGB : CRM_LINK
MSGNR : 005
TEXT :'No Links corresponding to the specified data could be determined'
Is that related to any communication problem CRM & JAVA ICSS System ?
Regards,
Pavan.The message in simple English just means that "You are doing something really bad" !!! It is absolutely not the communication problem, but understanding problem.
Though you may be executing the same function using SE37 or in the webshop application through JCo, the runtime context is different and without knowing what exactly your Z rfc is doing, it is very difficult to help. To start with, the userid - that is who is running the RFC is different in both situations. In SE37, it is the logon user and in the web, depending upon whether the connection is stateless or stateful, it could be the anonymous ICSS user or the logged in user. Here again, if you have used UME, it is the user id and if you have used ALIAS user, then it is the alias user id. This is just an example. Your runtime context can be different due to many other reasons too.
So, to make this simpler - what is that you are trying to do?
BTW, try not to create multiple threads for the same issue..
Maybe you are looking for
-
Sleep mode not working in Windows 8.1 on pavilion x2 11-h010ca
Hello, I've done 2 fresh installs from the HP recovery, then upgrading to 8.1 with all patches, but this hasn't helped. What I've discovered is this: - Using the standard Windows video driver: the machine will sleep and resume properly, but I cannot
-
Apex 4.0 how to add a button to each row of a report
Hi Everyone I have to a requirement where i need to add a button or link to each row of report dynamically and when a user clicks on it region has to display a region below. For example displaying report in region 1 and when a user clicks the link or
-
Hey all, I am unable to get a copy of the Tep12_04s course material. Can anyone provide a soft copy? Thanks. Regards, Preksha.
-
Pie chart value and percentage
is it possible to show both value and percentage when holding mouse cursor over the pie chart? I find there is no option for it. thank you very much!
-
One Macbook, two power cords?
The two-pronged power cord fits the "magnetic" part of the cable nicely. It sparks with wall connections, though. But my new Macbook also came with another cable; it has a three-way "male" connection on one end, with what looks like a small, tubular