Fund accounting active: layout 1-701 is unsuitable

hi experts,
when iam  trying to do Detail cost planning in CJR2 its showing that "fund accounting active: layout 1-701 is unsuitable".
please help me out.
Thanks and regards
sravani

sravani,
You are receiving this error because planing layout 1-701 does not include FM objects. In fact, all of the standard layouts do not include the necessary FM objects.
You'll need to determine what FM objects are required for an account assignment. For example, a customer might require Grants, Funds, Functional Areas, and Funded Programs to be included in the account assignments. Then use transaction OPO1 to create a new layout with these FM objects.
Building a layout is just like building a Report Painter report.
Hope this helps,
Matt

Similar Messages

  • One computer, but two user-accounts active, at the same time, in 10.6?

    I'm contemplating this setup: A current generation MacPro (running SL), with two monitors. Can I have two separate user-accounts (the Admin account and one additional user-account) active and running simultaneously from the MacPro, but, of course, displayed separately to the monitor corresponding with that user-account?
    Thank you!

    you can have two accounts logged in at the same time via fast user switching but there is no way to display them at the same time on different monitors.

  • Was the amount of free accounts activated in this iPhone, as to proceed?

    Was the amount of free accounts activated in this iPhone, as to proceed?

    Each device can ony create a limited number of iCloud accounts.  Once the maximum number of accounts have been created, all you can do is use one of the accounts previously created, or create a new account to use on another iOS device or Mac (running OS X 10.7.2 or later), if you have one.

  • ITunes - Fraudulent account activity, Apple refusing to help

    Got 2 email receipts from iTunes last night, for 2 gift cards, one for £25 and one for £75.
    Logged into my iTunes account via iTunes and there they were in my purchase history, sent to some unknown hotmail address.
    Removed my card details and changed my password.
    Contacted iTunes through their email support to get Apple to cancel those gift cards and issue a refund.
    Got a reply in 90 minutes with an offer of 5 song credits and a clear "we cannot refund your card" along with a "contact your financial institution".
    After another 3 emails form me, and 3 back from Apple I'm still left with the same line "we cannot refund your card". Sent them one more email last night which has so far been ignored.
    Contacted the bank this morning only to be told they can't do anything as it's a checking account not a credit card(!) They informed me that it is Apple's responsibility to refund the money as it is down to them to ensure the transactions are authorised.
    I'm heading down to the bank to fill out a charge back claim form which they will send to Apple but that's all they can do...
    This is beyond ridiculous.
    1) There should be a phone number for the iTunes store at least for fraudulent account activity.
    2) Apple, like any other company CAN refund money to a card, saying they "cannot" is a downright lie.
    3) Apple must be in breach of every consumer trading law in the UK (I use the UK store) with this policy.
    4) I use a secure password, I use trusted networks and no-one has access to my Mac. How the **** did the hacker get in?
    5) What should I do when both Apple and the bank refuse to help? To be honest I'm not annoyed at the bank as it's not their fault. This is a security breach of Apple's system and they're liable in my opinion.
    I've bought 700 items through iTunes since it started and this is how they treat me. Well no more. That gravy train is over for them.
    And don't get me started on the thousands upon thousands of pounds I've spent on Apple hardware and software...

    Thanks for the info.
    Annoyingly the rep in question (someone called Judy) refuses to escalate the issue to somene who can look into this and perform the refund.
    This is absolutely ridiculous, you're basically left with no-one to talk to (she/they are now ignoring my follow-up emails) , I've never seen anything like it. I've heard bad things about the likes of Paypal and eBay but Apple seem keen to add themselves to the list of sites not to trust due to a complete lack of customer service and boilerplate responses. Heck, Im sure last year (or it may be this coming Jan 1st) UK law changed to require online retailers to post their telephone number on the site...
    This useless rep is quoting me US Federal Law when I'm using the UK iTunes store and the terms and conditions on there clearly state that the transaction is covered under UK law...
    And UK law says they have to refund me.
    I've dealt with Apple for years, I've used the AppleCare helpline and the Genius bar many times and every time service has been A1. I'm genuinely amazed that this type of customer service goes on on the iTunes store... And especially about such a serious issue.

  • G/L Account Activation

    Hi,
    How to do G/L account activation for the Company Code.Kindly give the path or Txt code.
    Regards
    Abdul

    Hello Abdul,
    FS00 - To create GL account Centrally.
    FSP0 - To create in Chart of Accounts.
    FSS0 - To create in Company Code.
    While creating a GL account itself, you can assign it to particular company code.
    or
    Assign Chart of accounts to company code. The GLs which are in Chart of accounts will be activated in Company Code.
    Hope this will help you..
    Regards,
    Praisty

  • Purchase Account activation in Company Code

    Hi,
    We have a situation where for the finished goods, we have a new Purchasing Condition to make accruals of Inbound freight costs. And for these finished goods, for the Company codes which have Purchase account activated, we do not want the posting to be done to FRE, Freight purchase account.
    For the rest of the material types, the posting should be normal and have no change.
    Even for the company codes which has Purchase account actiavted, we want the posting to be as ... during goods receipt.
    89     108400000      1500    USD   BSX
    96     132200000     1250- USD     WRX
    86      815030000        250   USD   PRD
    40     450100000          100        USD   ZFN (new)
    50     132390000     100-        USD   FR1
    Could you please provide your comments?
    Thank you,
    Vamshi

    Hi Vamshi,
    I donot think this can be done as if PAM is active FRE will be trigerred
    See the IMG documentation for:
    Materials Management
    -> Valuation and Account Assignment
       -> Account Determination
          -> Account Determination Without Wizard
             -> Configure Automatic Postings
    Here do not execute the transaction, but click on the icon to display
    the documentation instead. Then, scroll down the different posting keys.
    You will see the following:
    "Purchase account(EIN), purchase offsetting account (EKG),
    freight purchase account (FRE):
    These transactions are used only if Purchase Account Management is
    active in the company code."
    Therefore, 'FRE' is the freight purchase account and it is only used if
    Purchase Account Management is active in the company code.

  • Order of WBS's in Activity Layout

    Hello Folks,
    First of all, I am VERY new to Primavera P6 (v8.something). I have spent the past two days searching for the answer to this question, but to no avail. Hopefully you guys will be kind enough to share some of your knowledge.
    We have created a pretty simple metal building project with a few WBS's. We can set the order of the WBS's in the WBS window in the order we want, but this order doesn't carry over to the activity view layout. For instance, one of our WBS's is named "Fabrication" and the other is named "Erection". Obviously, Fabrication should appear before Erection (and it does in the WBS window) but it doesn't once we change to the Activity Layout. Strangely, Erection is placed above Fabrication. All the Start dates and Activity ID's in Fabrication come before those in Erection. Each WBS is Sorted by Activity ID.
    I hope at least some of that made sense. My question is this: how do I control the order of the WBS's in the activity layout?
    Thanks guys

    Hi Guys,
    We figured out the problem. The WBS's in the Activity view were being sorted alphabetically/numerically. We just added numbers to the front of each entry (WBS Name) so the WBS's would appear in the desired order. Here's an example. In my earlier post I mentioned "Fabrication" would need to appear before "Erection". Because these WBS names were being sorted alphabetically, Fabrication was appearing after Erection. We changed "Fabrication" to "5 Fabrication" and "Erection" to "6 Erection" (Fabrication and Erection are the fifth and sixth grouping set in our list/project, respectively) in the WBS Name entry. By doing this, Fabrication will now appear above Erection.
    We tried adding these same numbers in front of the WBS Code names and that seemed to have no effect on the appearance order in activity view.
    Is this the only way to control the ordered appearance of WBS's in the activity layout view?
    Thanks for everyone's patience.

  • Email wizard says "no accounts activated". How do I activate?

    I have just received my first Blackberry via amazon, and connected to my carrier O2 using the sim from my previous phone (PAYG), and my ISP BT Broadband on my home wi-fi.  When I try to send an email I get "No message services configured..."  when I click through to the set-up wizard it leads me to a screen that says "No accounts activated", and offers to set up an enterprise account, which doesn't work.  I have also tried KB00510 "options" - "device" - "advanced systems settings" - "host routing table" which gives "no entries".  I've tried a reboot by removing the battery when switched on, to no avail.  BT Broadband say it is nothing to do with them.  I am able to connect to websites.  Can you please help?
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    Given what you describe, you likely do not have the required data plan added to your old SIM. A generic data plan does not activate email nor any other BB-proprietary services. You must upgrade your plan to a level that includes the services you desire. You should talk to O2 about all of that.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can 'Available section' in Field layout for account page layout renamed ?

    I have created custom page layout for 'Account ' where in I have added some custom fields for capturing more specific data of account.
    I would like create 'Account installed data' simillar headers available as 'Key Account Information:','Account Sales Information' in account page layout.Is there any possibility of renaming 'Available section'?

    santoshpatil, click on Account Layout, then just to the right of Edit you see a down arrow click on it then choose "Edit Sections".

  • Fund Accounting concept using Org structure with Balancing Entities

    Does anyone have any experience in working with a college and using Fund accounting with a Organization Structure with Balancing Entities? If so, need some help with how multi-org will help them when we upgrade to 11.5.10.2 and use multi-org. My client is currently in 11.5.8 apps version and is not using multi-org. Any advice or suggestions will help.
    Thanks

    I believe the challenges you mention are related to the alignment of cost center to a controlling area and the fact that the customer has aligned configuration of controlling areas to = company codes.  There is also the option in controlling configuration to allow multiple company codes to be attached to the same controlling area (with restrictions - see notes regarding configuring controlling area).  I have not tried this configuration to know whether this should work.

  • ME31L: Pop up of Funds-Account Assignment during ME31L

    Hello,
    At the time of creation of Scheduling agreement, we are getting pop-up to maintain *Funds-Account Assignment *.
    With the same material, vendor, plant, purchasing organisation combination we do not get this pop-up at the time of ME21N.
    What might be the reason for pop-up during ME31L?
    We do not want this pop-up in ME31L.

    Thanks Priyanka.
    We are not entering the amount manually in ME21N and in ME31L.
    System is getting the price from info records.
    We are not getting this pop-up during ME21n.
    We are getting this pop-up only durinh ME31L and ME31K.
    One more thing, we want to share.
    We are currently upgrading from 4.7 to ECC 6.0.
    In 4.7 we do not get this kind of pop-up in Me31L but in Ecc 6.0 we get this pop-up for ME31L.

  • Chase account activity page won't load the "I'd Like To" links when using Mozilla Firefox but will with Internet Exployer

    Chase Banking is always doing upgrades to their website. In their latest update the useable links on the account activity page simply don't appear under the "I'd like to" heading. Even the "I'd like to" heading is not appearing. That side of the page is empty, but if you use Internet Explorer all the links at there. Does anyone else have this problem using Chase Banking?
    Found the issue to this problem, I had a software program running called Ad Blocker. When I disabled this program the links became visible. I will use the other suggestions posted to this message.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Read a file having name (TACACS+ Accounting active.csv)  in java

    how to read a file having name (TACACS+ Accounting active.csv) in java through buffer reader

    Did you take even a millisecond to try anything?
    Here's my hint.
    "The same way you read anything else with a BufferedReader."

  • Hello I have a problem with the iPhone 5 does not know the account activation lock

    Hello I have a problem with the iPhone 5 does not know the account activation lock 

    You will not be able to access the device without the account activate lock password. IF you have the receipt and other proof of purchase you may have sucess with contacting apple and asking them for assistance. Depending gretaly on how much proof of purchase you have.
    Good luck Friend.

  • "You have reached the maximum number of free accounts activated on this iPhone"

    I bought a used iphone 4s, and when i try to activate my icloud account, it shows mw thw followin message:
    "Unable to start session - You have reached the maximum number of free accounts activated on this iphone"
    Is there a solution?

    Each device can only create three free iCloud accounts.  Once these are created, you cannot create another account on that device.  You can only re-use one of the accounts previously created, or create a new account to use on another iOS device (running iOS 5 or higher) or Mac (running OS X Lion or higher), if you have one.

Maybe you are looking for

  • Error while trying to syncronize audio and midi

    i use a powermac with a motu 896 hd i also have a powerbook last week i tried to record with the the motu and the powermac but after a short time the message 'error......midi' acured to continue my word i switched to the powerbook with succes and fin

  • Problems with Adobe Photoshop Elements 11

    I recently purchased the above and I am having problems with colour. When trying to work with a photo the colours are not true to the original. I have checked the inks and have checked the printer. When copying somthing staight from the printer the c

  • How do i change the time line in Au from time since recording start to the actual time?

    how do i change the time line in Au from time since recording start to the actual time? I have a recording that was started at 10:00 but obviously in Au it starts at 0:0:00. Basically i want to time shift this to 10:00:00

  • Question slide not advancing on click to continue

    I have only one question slide out of 6 and it is a true/false question. When answered the user clicks submit and the correct success caption appears and it indicates click anywhere to continue. The slide doesn't continue when you click on the slide.

  • I need help i have a harddisk prob

    hey if anyone can help me its much appreciated i have a hard disk problem everytime i turn my "nomad 40gb zen xtra" on it says harddisk problem then goes onto a menu that wont do anything if anyone can help me please do either tell me what i need to