Funny problem with getting Priner code

Hello, I got the Deskjet 1510 as a gift, I want to add my printer to ePrinter account, but I don't know where to find the priner code. In support is written that I must press a "ePrint button" or go to the control panel and press Configuration, then Network Services, but this printer doesn't have a "ePrint button" and control panel. How can I print sheet of network services with printer code?

Hello szkielol07,
Welcome to the HP Support Forums!
Have some good news bad news for you regarding your Deskjet 1510 and ePrint. Good news, you can stop looking for a code. Bad news, this printer is not ePrint enabled, nor is it wireless.
For more specifications on the printer, click here: Printer Specifications for the HP Deskjet 1510 and Deskjet Ink Advantage 1510 All-in-One Printer Ser...
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Problem with getting resized image's bytes

I've got a problem with getting correct bytes of a newly resized image. The flow is that I retrive an image from the filesystem. Due to the fact that it is large I resize it to a 50x50px thumbnail. I can display this thumbnail in #benchmark1 (see code below). Unfortunately something's wrong with my imageToBytes funtion which returns reasonably small size of image but is totally useless - I can't make an image of it anymore so at #benchmark2 the application either crashes or keeps freezing. I saved this byte array on my disk and tried to preview under Windows how does it look but I got a message "Preview unavailabe". I did some digging in the Internet and I supposed that it's because I don't use any jpg or png encoders to save the file. Actually I think that it's not the case, as the bytes returned from method imageToBytes look weird - I cannot even make a new image of them and display it without any saving in memory.
                              byte[] bytes = FileHandler.readFile (
                                      FileHandler.PHOTOS_PATH, fileName);
                              Image img2 = Image.createImage (bytes, 0, bytes.length);
                              img2 = ImageHandler.getInstance ().resize (img2);
                                                //#benchmark1
                              bytes = ImageUtils.imageToBytes (img2);
                              img2 = Image.createImage (bytes, 0, bytes.length);
                                                //#benchmark2my imageToBytes function is as follows:
     public static byte[] imageToBytes (Image img)
          int[] imgRgbData = new int[img.getWidth () * img.getHeight ()];
          byte[] imageData = null;
          try
               img.getRGB (imgRgbData, 0, img.getWidth (), 0, 0, img.getWidth (),
                       img.getHeight ());
          catch (Exception e)
          ByteArrayOutputStream baos = new ByteArrayOutputStream ();
          DataOutputStream dos = new DataOutputStream (baos);
          try
               for (int i = 0; i < imgRgbData.length; i++)
                    dos.writeInt (imgRgbData);
               imageData = baos.toByteArray ();
               baos.close ();
               dos.close ();
          catch (Exception e)
          return imageData;
I've run totally out of any idea what's wrong, please help!
Edited by: crawlie on Jul 17, 2010 6:21 PM

Hey Crawlie,
Please note that simply writing int values into ByteArrayOutputStream will not suffice. Please have a look at the following conversion from int pixel value into byte[4]:
public static final byte[] intToByteArray(int value) {
        return new byte[] {
                (byte)(value >>> 24),
                (byte)(value >>> 16),
                (byte)(value >>> 8),
                (byte)value
}Good Luck!
Daniel

Funny problem with the mapping

Dear All,
I am facing with a funny problem with the mapping.
I am working on a scenario in which Invoice IDOC created in R/3 will be posted to XI and then in XI, mapping are done to create an XML file out of that IDOC.
In the Idoc, there is a segment E1EDKA1 which is getting created multiple times for different partners alongwith their details. The fields in E1EDKA1 segment are: PARVW,PARTN LIFNR etc.
In the output I just want LIFNR number where PARVW = RE or RS.
I have done the required mapping and when I am testing the mapping its giving me the required results correctly but when I make this scenario live then in real-time, the output XML file has no value for LIFNR.
Can anybody guide me out why is it happening tht during mapping testing its giving the correct result but at real time the mapping is returing no value.
Warm Regards,
N.Jain

Hi Nishant,
Are you sure the test data which you are using while testing the mapping in IR and the one which comes when you test real time is the same?
The data which comes real time. Copy the source payload and then test in mapping. See if you get the right data which you expect. If you do then theres some problem.
Now also go to the same message and in trace you can find out the GUID of the mapping program which is used.
Go to RWB - Last button..not sure what the name is .. something similar to Cache.. Find your mapping program and see if the GUID Matches. If the GUID matches then it is okay.
Also try to do the following..
Reactive the MM/IM.
Go to ID. Make some dummy change in Interface determination and then activate it.
Check the cache notification to make sure if the cache is updated.
If the above doesnt help you let us know.
Regards,
Sumit

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it acr

Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas Dijokas

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Just moved my email from entourage to Mail. Having real problems with getting my signatures to work properly. When adding in a small company logo, windows computers only receive signature as an attachment. Am sending email as Rich Text. Any ideas on a fix

Just moved my email from Entourage to Mail. Having real problems with getting my signatures to work properly despite sending email as Rich Text.
When adding in a small company logo to the signature, PC's / windows computers only receive signature and logo as attachments.
I've tried all possible fixes I can find including getting a PC user to format the logo but no joy. Has anyone experienced this and any ideas on a fix gratefully received.

Send it as html so the signature is an image source URL

Problems with getting my Ipod Touch to work on my Sony Bravia or any TV

I am having problems with getting videos or movies to play on my Sony Bravia HDTV or any TV. I have a first generation Ipod Touch and I have the Apple AV Composite Cables and all I get is sound for both TV's that I tried. I read one post where some guy had a faulty Ipod that wouldn't work. Does anyone know how of something hidden or special that needs to be done or how did they fix the problem if they had the same one? Thank, ejcarlson

Check connection, if you have a case on your Ipod the connection may not be good enough.

Problem with getting iPod to work.

I'm having a problem with getting an iPod to connect to my computers. Also I can't even really get it to run. My brother gave it to me one or two years ago and it had these problems I just didn't think of the idea of going directly to Apple to figure it out. It's a 30 GB black iPod if that helps. When I plugged it in it showed the battery symbol. When I leave it for a while it shows the Apple symbol. Then it comes up with this: http://spirrwell.webatu.com/ipod.jpg If you can help thanks in advance!
Message was edited by: Spirrwell

I figured out that it was a hard drive problem so I'll find a fix if not I guess I'm screwed.

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Problem with getting the little blackberry icon

Hi the blackberry I'm using is working and up to date. I was setting up my mates blackberry 9320 but having a problem with getting the little blackberry icon to appear in the top right corner of my phone where the GMS is and signal bar and stuff its something to do with blackberry.
I tried downloading bbm and it say associating bbm with blackberry id and constant loads with nothing happening bbm not working
I NEED THE TINY BB ICON AT TOP RIGHT???

Hi neal123
That BlackBerry icon will appear near signal bar when we activate BIS on a 3G device. Did he activated BIS on his account. ?
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Problem with my exe code

Hello,
I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
Ahmet
Attachments:
front panel1.jpg ‏47 KB
Oksijen_Atolyesi.vi ‏45 KB

Hi Ahmet,
when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Oksijen_Atolyesi.vi ‏35 KB

TS2755 I am having a problem with getting notified when I receive a call or a text. My phone will not ring or vibrate.

I am having a problem with getting notified when I receive a call or a text.

Hi BigBroMAC,
The first thing I would check is Do Not Disturb mode, as this will cause that behavior:
iOS 6: Using Do Not Disturb
http://support.apple.com/kb/HT5463
If that isn't the issue, this article has slightly different symptoms but the troubleshooting would be the same:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Before you do step 10, however, I recommend resetting all settings to see if that helps. To do that, choose Settings > General > Reset > Reset All Settings.
I hope this helps!
- Ari

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

Hello Els,
it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X (Use: Show additional download options)
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
Good luck!
Hans-Günter
P.S.
Since I use two screens, the whole thing became even more comfortable.

Office Home and Student 2010 Install problems with a Key Code Err..

I had to install a new hard drive, lost everything..So I upgraded to Windows 7 Professional ..
I own a the 2010 Home and Student CD bought at the Microsoft store...Doesn't come with Outlook...
So I ordered the Home and Business 2010 disc with Service Pack 1 Included, this has 2010 outlook ...It loaded and worked fine up to the point I had to replace my Drive with New Windows 7 Pro...
Everything loaded find, but every time I try and use it, its acts like it is caught in some kind of loop...It keep trying install and configure, then ask for my Key Code every time, sort of like a OLMAP132.Dll err...I did manage to make it work once, I even
got back the test email from Microsoft after setting up Outlook....Then when I rebooted the system, this same loop action started ...
I have uninstalled this at least 4 times, searched for anything with ties to Microsoft office, and uninstalled it..Then did a New Clean Install...Still getting this key Code question every time I open up a Office program....So, I am saying without a doubt,
2010 Office Home and Student and Business WILL NOT RUN on Windows 7 professional ......If you have any idea how to fix this..Please respond with facts on how to repair this please....

Greta,,,After down loading ( Off Cat ) tools...I saved that program...However, there is another major problem with Your Instructions I ran into...It seems I'm not the trusted source to change files such as the Mapi32.dll files..So I was unable to attempt
your repair ...However I have found instructions for the task, but it seems very complicated for sure.. Here are the instructions, and I would like for you and maybe a co-worker to check these.. before I make any changes in system..
How to Change the Trusted Installer name...
1. Right Click on the File Or directory.
2.Click On properties, on the Right Click menu.
3.Click On "" Security "" tab
4.Click On " Advanced" Button on the bottom.
5.In the advance Security Dialog Window, Click on "" Owner "" tab
6.Here you will able to see the Current Owner ( ie: Trusted Installed )
7. To take owner ship of the object, click on the Edit button, Give permission to UAC , the highlight the user name in the " Change Owner To" box that you want to assign as the owner for the object. Then Click " OK " to finish the process.
8.Back in the Advanced Security Settings Window , You will see the current owner has changed to the user you just selected.
9.Click the ""OK "" and exit this window.
10. Click "'OK"" again, to exit completely from the Properties window..
11. Repeat Step 1 to 4 to open the object's Properties Window again...
12.Back in Object's Properties window, click on the edit button , and confirm the UAC elevation request.
13. Highlight the Administrators in the " group of users names"" box. If the user ID or group that you want to manage the permissions for the object doesn't exist, Click on.."" Add"" button, and type in the user name or
group name desired into the "" Enter Object names to select ( can use Everyone as user Name)" box and finish off by clicking on the "" OK""
14. In the permissions for Administrators box below ( or any other user name or group name you choose). click on ""Full Control"" under the ""Allow"" column to assign full access rights control permission to Administrator's
group....
http//windows.microsoft.com/en-us/windows-vista/troubleshoot-access-denied-when opening-files-or-folders.

Problem with GET PARAMETER in "O4K_LICENSE" Transaction

Hi folks,
I am facing a problem with the usage of "GET PARAMETER ID" in the transaction O4K_LICENSE (IS-oil).
I have written a BDC which feeds in the License Type, External License type and a few other Mandatory fields to the Transaction, and on saving the transaction, SAP generates an "Internal License Number". This field has a Parameter ID "OIH", and I am using the command
GET PARAMETER ID 'OIH' FIELD lw_licin.
For the first pass of the loop, there is a value coming into lw_licin, but in the later loops this Value is not refreshing and the value which is coming into lw_licin is not changing. But the Database table OIHL is getting updated with the correct Internal License number values.
So, my question is, is there anyway by which i can refresh the SAP Global Memory after every loop pass?
Or, is there any way out to get the new generated values into lw_licin ?
Thanks in advance,
Vijay.

Hi
If you clear the parameter, you should transfer a blank value to it:
DATA: NO_VALUE.
SET PARAMETER ID <ID> FIELD NO_VALUE.
Now the problem is this statament should be into loop and i think the transaction only does the GET PARAMETER.
If transaction doesn't do the SET PARAMETER yuo can do anything.
In your standard program there should be something like:
LOOP...
IF SY-TABIX > 1.
SET PARAMETER ID <ID> FIELD NO_VALUE.
ENDIF.
ENDLOOP.
but I think it's very hard there is a piece of code like that, and you can do nothing, because you can only set the parameter before calling the transaction (in bdc mode) and after calling the transaction but not while the transaction is working.
You should change the standard program to do this.
Max
Message was edited by: max bianchi

Problems with getting internet explorer on my mac with virtual box 4.3.20, who can help?

This is what I did:
1) downloaded and installed virtual box 4.3.20
2) copied
curl -s https://raw.githubusercontent.com/xdissent/ievms/master/ievms.sh | IEVMS_VERSIONS="11" bash
in the Terminal (for IE 11 only). I got this from the link: Internet Explorer for Mac the Easy Way: Run IE 7, IE8, & IE9 Free in a Virtual Machine
3) that is where things went wrong, see attached image for the error I get (after a long time) in the Terminal
Tried it twice but every time the same problem.. I hope someone can help me!

The error means that your download session was interrupted. There could be a problem with your Internet connection or a problem with the remote server providing the download. If you otherwise have no trouble with Internet, I suspect the later.
But why would you want to bother downloading someone's virtual machine to run MS Internet Explorer? Not only is there a real security risk since you don't know what the VM or installation script is doing, but if the VM is running MS Windows, then the person providing the software is breaching software distribution and copyrights laws, and so will you, using the software.
Btw, have you read any of the comments? Do you really want to download 20GB? (nonsense)
If you need IE and VirtualBox, simply create a new VM and install MS Windows using a regular copy and enter your license code. There is also no need to install different versions of IE, since IE can be configured to run as a prior version.
However, there is no need to install and run MS Windows to run IE. There are products that provide free Windows API to let you run PC applications as they were Mac applications without installing Windows, e.g. Wineskin, Wine Bottler, or commercial solutions, such as Crossover.
See http://www.wikihow.com/Install-Internet-Explorer-on-Mac-Using-WineBottler

Funny problem with getting Priner code

Similar Messages

Maybe you are looking for