Funtion to write numeric amount in words for printing cheques

Need to create a report to print cheques. The numeric amount of the cheque needs to written in words also on the line below the payee's name.
eg. $100 = "One hundred"
I would like to know if there is a function to do this task.

Hi,
Kumar query is right but it will only work for the values between 1 and 5373484.
Navneet Jain
[email protected]

Similar Messages

How to display amount in words for subtotal value?

Hi All,
I am diplaying a amount in words for sub-total value after each document number.
Can any one suggest how to display text for sub-total value not for Grand total?
I want subtotal at each material for each document number and want to display that subtotal amount in words.
Thanks and Regards
Steve

Thanks Jorge ,
Is it possible in ALV printing Sut-total text by adding a new line .?
And where to insert At new or on-chane ?
Sub-total calculating automatically not programaticall..
Regards
Steve

Numeric value in words (for Cheque printing)

Hi All,
To convert numeric value in words (for Cheque printing), I created two functions in Forms and reports 6i.
1) FUNCTION Spell (val number) RETURN CHAR IS
sp varchar2(100);
BEGIN
if val > 0 then
     return(initcap(to_char(to_date(val, 'SSSSS'), 'SSSSSSP')));
else
     return('');
end if;
END;
2) function SPELLED_AMOUNTFormula return Char is
cents number;
c_str varchar2(80);
val number;
begin
val := :p_instr_amt;
cents := (val mod 1) * 100;
if cents > 0 then --creates string for cents
c_str := ' and ' || spell(TO_CHAR(cents)) || ' fils Only';
else
c_str := ' Only';
end if;
if val < 1000 and val > 1 then
return (initcap(spell(floor(val))) || c_str);
elsif val > 1000 then
return(initcap(spell(floor(val/1000))) || ' Thousand ' ||
spell(floor(val mod 1000)) || c_str);
else
return('Zero'||c_str);
end if;
end;
This convert value up to thousands. How to convert the value more than 1 lac. please configure this code.
Thanks in advance

Hi,
To spell integers as high as 5,373,484, use 'Jsp' instead of 'ssssssp'.
TO_CHAR ( TO_DATE ( n     -- n = integer to be spelled
              , 'J'
     , 'Jsp'          -- Case-sensitive
     )5373484 is the Julian date of December 31, 9999, the latest DATE value in Oracle. In Oracle 10.2, you can actually spell numbers a little bit higher using the expression above, but I'm not sure why, and I wouldn't count on being able to do so in future versions.
There's no need for INITCAP here. If the 2nd argument to TO_CHAR is initcapped (as above), then the output will be, too.
To spell even larger numbers, see this page by Tom Kyte, which also includes languages other than English, and lakh-crore-arab-kharab wording.
Edited by: Frank Kulash on Oct 13, 2012 7:21 AM

Do we have different Print Programs for printing Cheques in Different Lang

Hi Peers,
I have requirement of Cheque printing in SPANISH Language.
We have been using Program RFFOUS_C (International Payment Medium - Check (with check management)) for printing Cheques in French & English.
This same print program does not work with the Spanish Script ZF110_ES_CHEQUE which is copy of French script.
I am wondering if we have to use a different Print Program (RFFOES_T) or is it the issue with the data & configuration.
Could you please clarify.
Thanks in advance!
Regards,
Daniel

Hi,
Thanks for the suggestion!
The Print Program set in FBZP is RFFOUS_C for the country Mexico.
The Print program works well in Client DCO100 but the same printprogram when used in DCO101 doesn't work for the Mexico script.
The Mexico script is also a copy from client DCO 100 . In the this Mexico script I have changed the currency & Defined language as 'S' at some places .
The payments are processed but no Spool requests are generated.
Thanks,
Daniel

I am a writer. Am using Word for Mac 2011 for latest book. How can I learn quickly about sophisticated use of 'styles'?

Example: Is Outline level normally part of a Document's Style in Word for Mac.

How to create numbered headings or outline numbering in Ribbon Versions of Word by Shauna Kelly
Why use Microsoft Word’s built-in heading styles? by Shauna Kelly
Tips for Understanding Styles in Word by Shauna Kelly
Understanding Styles in Microsoft Word
How to create a table of contents in Microsoft Word by Shauna Kelly
In answer to your direct question: An outline level is normally part of a paragraph style in Word. It can be body text, or a heading level.
The articles listed are about different Windows versions of Word but AFAIK, they apply to Mac versions as well.
Charles Kenyon Madison, WI

Amount in words in SAP 8.8

Hello expert,
                    I want to convert the document amount in words in Indian standard and I am using the below Functions which I got from sdn and its working fine in SAP 2007 but it is giving error in SAP 8.8 and patch level is 5.........please give the feasible solution.....
1. Function to Convert one Digit Number to words.
CREATE    Function dbo.fConvertDigit(@decNumber decimal)
returns varchar(6)
as
Begin
declare
@strWords varchar(6)
Select @strWords = Case @decNumber
     When '1' then 'One'
     When '2' then 'Two'
     When '3' then 'Three'
     When '4' then 'Four'
     When '5' then 'Five'
     When '6' then 'Six'
     When '7' then 'Seven'
     When '8' then 'Eight'
     When '9' then 'Nine'
     Else ''
end
return @strWords
end
2. Function to convert 2 digit number to words.
CREATE    Function dbo.fConvertTens(@decNumber varchar(2))
returns varchar(30)
as
Begin
declare @strWords varchar(30)
--Is value between 10 and 19?
If Left(@decNumber, 1) = 1
begin
Select @strWords = Case @decNumber
     When '10' then 'Ten'
     When '11' then 'Eleven'
     When '12' then 'Twelve'
     When '13' then 'Thirteen'
     When '14' then 'Fourteen'
     When '15' then 'Fifteen'
     When '16' then 'Sixteen'
     When '17' then 'Seventeen'
     When '18' then 'Eighteen'
     When '19' then 'Nineteen'
end
end
else -- otherwise it's between 20 and 99.
begin
Select @strWords = Case Left(@decNumber, 1)
     When '0' then ''
     When '2' then 'Twenty '
     When '3' then 'Thirty '
     When '4' then 'Forty '
     When '5' then 'Fifty '
     When '6' then 'Sixty '
     When '7' then 'Seventy '
     When '8' then 'Eighty '
     When '9' then 'Ninety '
end
Select @strWords = @strWords + dbo.fConvertDigit(Right(@decNumber, 1))
end
--Convert ones place digit.
return @strWords
end
3. Function to convert amt in numbers to words. (Built with the help of above 2 functions)
CREATE function dbo.fNumToWords (@decNumber decimal(12, 2))
returns varchar(300)
As
Begin
Declare
@strNumber varchar(100),
@strRupees varchar(200),
@strPaise varchar(100),
@strWords varchar(300),
@intIndex integer,
@intAndFlag integer
Select @strNumber = Cast(@decNumber as varchar(100))
Select @intIndex = CharIndex('.', @strNumber)
if(@decNumber>99999999.99)
BEGIN
RETURN ''
END
If @intIndex > 0
begin
Select @strPaise = dbo.fConvertTens(Right(@strNumber, Len(@strNumber) - @intIndex))
Select @strNumber = SubString(@strNumber, 1, Len(@strNumber) - 3)
If Len(@strPaise) > 0 Select @strPaise = @strPaise + ' paise'
end
Select @strRupees = ''
Select @intIndex=len(@strNumber)
Select @intAndFlag=2
while(@intIndex>0)
begin
if(@intIndex=8)
begin
Select @[email protected](left(@decNumber,1))' Crore '
Select @strNumber=substring(@strNumber,2,len(@strNumber))
Select @intIndex=@intIndex-1
end
else if(@intIndex=7)
begin
if(substring(@strNumber,1,1)='0')
begin
   if substring(@strNumber,2,1)<>'0'
   begin
    if (@strRupees<>NULL and substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and substring(@strNumber,6,1)='0' and substring(@strNumber,7,1)='0' and @intAndFlag=2 and @strPaise=NULL)
    begin
     Select @strRupees=@strRupees+' and ' dbo.fConvertDigit(substring(@strNumber,2,1))' Lakh '
     Select @intAndFlag=1
    end
    else
    begin
     Select @[email protected](substring(@strNumber,2,1))' Lakh '
    end
    Select @strNumber=substring(@strNumber,3,len(@strNumber))
    Select @intIndex=@intIndex-2
   end
   else
   begin
    Select @strNumber=substring(@strNumber,3,len(@strNumber))
    Select @intIndex=@intIndex-2
   end
end
else
begin
   if(substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and substring(@strNumber,6,1)='0' and substring(@strNumber,7,1)='0' and @intAndFlag=2 and @strPaise='')
   begin
    Select @strRupees=@strRupees+' and ' + dbo.fConvertTens(substring(@strNumber,1,2))+' Lakhs '
    Select @intAndFlag=1
   end
   else
   begin
    Select @[email protected](substring(@strNumber,1,2))' Lakhs '
   end
   Select @strNumber=substring(@strNumber,3,len(@strNumber))
   Select @intIndex=@intIndex-2
end
end
else if(@intIndex=6)
begin
   if(substring(@strNumber,2,1)<>'0' or substring(@strNumber,3,1)<>'0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and substring(@strNumber,6,1)='0' and @intAndFlag=2 and @strPaise='')
   begin
    if len(@strRupees) <= 0
    begin
     if convert(int,substring(@strNumber,1,1)) = 1
     begin
      Select @strRupees=@strRupees+'' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakh '
      Select @intAndFlag=2
     end
     else
     begin
      Select @strRupees=@strRupees+'' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakhs '
      Select @intAndFlag=2
     end
    end
    else
    begin
     if convert(int,substring(@strNumber,1,1)) = 1
     begin
      Select @strRupees=@strRupees+' and' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakh '
      Select @intAndFlag=1
     end
     else
     begin
      Select @strRupees=@strRupees+' and' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Lakhs '
      Select @intAndFlag=1
     end
    end
   end
   else
   begin
    if convert(int,substring(@strNumber,1,1)) = 1
    begin
     Select @[email protected](substring(@strNumber,1,1))' Lakh '
    end
    else
    begin
     Select @[email protected](substring(@strNumber,1,1))' Lakhs '
    end
   end
   Select @strNumber=substring(@strNumber,2,len(@strNumber))
   Select @intIndex=@intIndex-1
end
else if(@intIndex=5)
begin
   if(substring(@strNumber,1,1)='0')
   begin
    if substring(@strNumber,2,1)<>'0'
    begin
     if(substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and @intAndFlag=2 and @strPaise='')
     begin
      Select @strRupees=@strRupees+' and ' dbo.fConvertDigit(substring(@strNumber,2,1))' Thousand '
      Select @intAndFlag=1
     end
     else
     begin
      Select @[email protected](substring(@strNumber,2,1))' Thousand '
     end
     Select @strNumber=substring(@strNumber,3,len(@strNumber))
     Select @intIndex=@intIndex-2
    end
    else
    begin
     Select @strNumber=substring(@strNumber,3,len(@strNumber))
     Select @intIndex=@intIndex-2
    end
   end
   else
   begin
    if(substring(@strNumber,3,1)='0' and substring(@strNumber,4,1)='0' and substring(@strNumber,5,1)='0' and @intAndFlag=2 and @strPaise='')
    begin
     Select @strRupees=@strRupees' and 'dbo.fConvertTens(substring(@strNumber,1,2))+' Thousand '
     Select @intAndFlag=1
    end
    else
    begin
     Select @[email protected](substring(@strNumber,1,2))' Thousand '
    end
    Select @strNumber=substring(@strNumber,3,len(@strNumber))
    Select @intIndex=@intIndex-2
   end
end
else if(@intIndex=4)
begin
   if ( (substring(@strNumber,3,1)<>'0' or substring(@strNumber,4,1)<>'0') and substring(@strNumber,2,1)='0' and @intAndFlag=2 and @strPaise='')
   begin
    Select @strRupees=@strRupees+' and' + dbo.fConvertDigit(substring(@strNumber,1,1))+' Thousand '
    Select @intAndFlag=1
   end
   else
   begin
   Select @[email protected](substring(@strNumber,1,1))' Thousand '
   end
   Select @strNumber=substring(@strNumber,2,len(@strNumber))
   Select @intIndex=@intIndex-1
end
else if(@intIndex=3)
begin
   if substring(@strNumber,1,1)<>'0'
   begin
    Select @[email protected](substring(@strNumber,1,1))' Hundred '
    Select @strNumber=substring(@strNumber,2,len(@strNumber))
    if( (substring(@strNumber,1,1)<>'0' or substring(@strNumber,2,1)<>'0') and @intAndFlag=2 )
    begin
     Select @strRupees=@strRupees+' and '
     Select @intAndFlag=1
    end
    Select @intIndex=@intIndex-1
   end
   else
   begin
    Select @strNumber=substring(@strNumber,2,len(@strNumber))
    Select @intIndex=@intIndex-1
   end
end
else if(@intIndex=2)
begin
   if substring(@strNumber,1,1)<>'0'
   begin
    Select @strRupees=@strRupees+dbo.fConvertTens(substring(@strNumber,1,2))
    Select @intIndex=@intIndex-2
   end
   else
   begin
    Select @intIndex=@intIndex-1
   end
end
else if(@intIndex=1)
begin
   if(@strNumber<>'0')
   begin
    Select @strRupees=@strRupees+dbo.fConvertDigit(@strNumber)
   end
   Select @intIndex=@intIndex-1
end
continue
end
if len(@strRupees)>0 Select @strRupees=@strRupees+ ' rupees '
IF(len(@strPaise)<>0)
BEGIN
if len(@strRupees)>0 Select @strRupees=@strRupees + ' and '
END
Select @strWords = IsNull(@strRupees, '') + IsNull(@strPaise, '')
select @strWords = @strWords + ' only'
Return @strWords
End
->> Create 1 UDF in Header on Requrie Documents (ex. Marketing Documents).
->> Create 3 Function in MSSQL Server Management.
->> Create 1 FMS in Query Generator and save as Query Manager then Assign to UDF for Amount in Words.
for example:
Create UDF in Header on Marketing Documents.
->> Choose Tools on Top menu.
->> User - Defined Fields. -> User Manage Fields.
->> Open the User Manage Fields Widnow.
->> Marketing Documents. -> Title.
->> Select Title and Click Add button in Bottom on User Manage Fields Window.
->> Create Amount in Words UDF(Code, Discription and Type - Character) and Add the UDF.
Create Function in MSSQL Server Management.
Check this Link, (have 3 Functions in Link).
http://techcreeze.blogspot.com/2008/11/convert-amount-into-words-according-to_15.html
1st Funciton - to Convert one Digit Number to words
2nd Funciton - to convert 2 digit number to words.
3rd Funciton - to convert amt in numbers to words.
->> Open the MSSQL Server Management Window.
->> Choose your Company database and Create NEW Query.
->> Create 3 Function Queries one by one.
->> Create 3 NEW Query Tab and 1st one put the 1st Function then Run the Function. and
2nd New Query tab put the 2nd Function then Run the Function.
3rd New Query tab put the 3rd Function then Run the Function.
Create FMS in Query Generator and Save as Query Manager.
->> Adminstration.
->> Reports. -> Query Generator.
->> Open the Query Generator and put the below FMS query.
for example : Purchase Order Doc. Toal(in wrods).
declare @Doc_total numeric (19,6)
set @Doc_total=$[OPOR.DocTotal]
select dbo.fNumToWords (@Doc_total)
->> Assign the FMS in UDF on Purchase Order.
->> Auto Refresh of Document Total.
Ex.
1. Goto the UDF and Clcik ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select Document Total.
6. Check the Display Saved Values.

Hi Neetu,
its not converting decimal values in paisa...
Regards
Deepak tyagi

How to display amount in words in the last page

Hi,
I am very new to Oracle Report, but v.good experience in Crystal report.
How can i display amount in words for an invoice amount total in the last page of the invoice and after total amount. I created a new non repeating frame and put the amount in words inside that, and set the frames diplay property Print on Last Page, but the problem is already there is a repeating frame to print all the invoices item, and the total in figure. But the amount in words frame is not always coming after the total amount,either it should be at the bottom of the last page in fixed position, otherwise it should move just below the total amount.
I am using Oracle 11g.
Thanks in advance...
Fsl

Hi ,
Use This function
create or replace FUNCTION xxg4_zen_conv_words (p_amount IN Number) RETURN Varchar2 IS
--Creation Date   : 11-DEC-2009
--Purpose         : This Function returns amount in words.
--Parameters      :
--1) p_amount : Only positive and negative values are allowed.
Precision can be entered upto 10 digits and only 2 scales
are allowed e.g 9999999999.99
-- Index by Tables to store word list
TYPE typ_word_list IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_list typ_word_list;
TYPE typ_word_gap IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_gap typ_word_gap;
-- Local Variables
v_amount Number := p_amount;
v_amount_length Number;
v_words Varchar2(10000);
v_point_found Varchar2(1) := 'N';
v_point_value Number;
BEGIN
/*Getting value after point if found */
v_point_value := SUBSTR(v_amount,(INSTR(v_amount,'.',1) + 1),2);
/*Checking whether amount has any scale value also */
v_point_found := CASE WHEN (INSTR(v_amount,'.',1)) = 0 THEN 'N'
WHEN (INSTR(v_amount,'.',1)) > 0 THEN 'Y'
END;
/*Converting amount into pure numeric format */
v_amount := FLOOR(ABS(v_amount));
v_amount_length := LENGTH(v_amount);
t_typ_word_gap(2) := 'and Paise';
t_typ_word_gap(3) := 'Hundred';
t_typ_word_gap(4) := 'Thousand';
t_typ_word_gap(6) := 'Lakh';
t_typ_word_gap(8) := 'Crore';
t_typ_word_gap(10) := 'Arab';
FOR i IN 1..99
LOOP
t_typ_word_list(i) := To_Char(To_Date(i,'J'),'Jsp');
END LOOP;
IF v_amount_length <= 2
THEN
/* Conversion 1 to 99 digits */
v_words := t_typ_word_list(v_amount);
ELSIF v_amount_length = 3
THEN
/* Conversion for 3 digits till 999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(3);
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2));
ELSIF v_amount_length = 4
THEN
/* Conversion for 4 digits till 9999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,2,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2));
END IF;
ELSIF v_amount_length = 5
THEN
/* Conversion for 5 digits till 99999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,3,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2));
END IF;
ELSIF v_amount_length = 6
THEN
/* Conversion for 6 digits till 999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,4,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2));
END IF;
ELSIF v_amount_length = 7
THEN
/* Conversion for 7 digits till 9999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,5,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2));
END IF;
ELSIF v_amount_length = 8
THEN
/* Conversion for 8 digits till 99999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,6,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,7,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,2));
END IF;
ELSIF v_amount_length = 9
THEN
/* Conversion for 9 digits till 999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,7,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,8,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,2));
END IF;
ELSIF v_amount_length = 10
THEN
/* Conversion for 10 digits till 9999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(10);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(8);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,8,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,9,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,9,2));
END IF;
END IF;
IF v_point_found = 'Y'
THEN
IF v_point_value != 0
THEN
v_words := v_words||' '||t_typ_word_gap(2)||' '||t_typ_word_list(CASE WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 1 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)||'0'
WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 2 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)
END);
END IF;
END IF;
IF p_amount < 0
THEN
v_words := 'Minus '||v_words;
ELSIF p_amount = 0
THEN
v_words := 'Zero';
END IF;
IF LENGTH(v_amount) > 10
THEN
v_words := 'Value larger than specified precision allowed to convert into words. Maximum 10 digits allowed for precision.';
END IF;
RETURN (v_words);
END xxg4_Zen_Conv_Words;
--Thanks
SAGAR SANKPAL

Amount in Words (Indian Rupees)

Dear All,
I am using SAP 2007B PL 18.I have found out the below mentioned function for converting the amount to words in SDN only. But when i try and create the function it gives error "Incorrect Syntax near 00' . I think there is an incomplete syntax near the SubString function. Can someone please help me on the same and give the correct function.
Create function [dbo].[AmountToWords] ( @InNumber Numeric(18,2) )
--Returns the number as words.
returns VARCHAR(2000)
as
BEGIN
SET NoCount ON
Declare @Num Varchar(20)
Declare @Dec Varchar(3)
Declare @Return Varchar(2000)
Set @Dec = SubString(Convert(Varchar(20),@Innumber),Len(Convert(Varchar(20),@Innumber))-2,3)
Set @Num = SubString(Convert(Varchar(20),@Innumber),1, Len(Convert(Varchar(20),@Innumber))-3)
Declare @Hundred Char(8) Declare @HundredAnd Char(12) Declare @Thousand Char(9)
Declare @Lakh Char(5)
Declare @Lakhs Char(6)
Declare @Crore Char(6)
Declare @Crores Char(7)
Set @Hundred = 'Hundred '
Set @Thousand = 'Thousand '
Set @Lakh = 'Lakh '
Set @Lakhs = 'Lakhs '
Set @Crore = 'Crore '
Set @Crores = 'Crores '
Set @HundredAnd = 'Hundred and '
if Len(@Num) = 1
-- One
Begin
Set @Return = dbo.GetTextValue(@Num)
End
Else if Len(@Num) = 2
-- Ten
Begin
Set @Return = dbo.GetTextValue(@Num)
End
Else if Len(@Num) = 3
-- Hundred
Begin
Set @Return = dbo.GetTextValue(SubString(@Num,1,1)) + @Hundred
IF SubString(@num,2,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,2,2))
End
Else if Len(@Num) = 4
-- thousand
Begin
Set @Return = dbo.GetTextValue(SubString(@Num,1,1)) + @Thousand
If SubString(@Num,2,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,2,1)) + @Hundred
IF SubString(@num,3,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,3,2))
End
Else if Len(@Num) = 5
-- Ten Thousand
Begin
Set @Return = dbo.GetTextValue(SubString(@Num,1,2)) + @Thousand
If SubString(@Num,3,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,3,1)) + @Hundred
IF SubString(@num,4,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,4,2))
End
Else if Len(@Num) = 6
-- Lakh
Begin
If SubString(@Num,1,1) = '1'
Set @Return = dbo.GetTextValue(SubString(@Num,1,1)) + @Lakh
Else
Set @Return = dbo.GetTextValue(SubString(@Num,1,1)) + @Lakhs
If SubString(@Num,2,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,2,2)) + @Thousand
If SubString(@Num,4,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,4,1)) + @Hundred
IF SubString(@num,5,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,5,2))
End
Else if Len(@Num) = 7
-- Ten Lakhs
Begin
Set @Return = dbo.GetTextValue(SubString(@Num,1,2)) + @Lakhs
If SubString(@Num,3,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,3,2)) + @Thousand
If SubString(@Num,6,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,5,1)) + @Hundred
IF SubString(@num,6,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,6,2))
End
Else if Len(@Num) = 8
-- Crore
Begin
Set @Return = dbo.GetTextValue(SubString(@Num,1,1)) + @Crore
If SubString(@Num,2,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,2,2)) + @Lakhs
If SubString(@Num,4,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,4,2)) + @Thousand
If SubString(@Num,6,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,6,1)) + @Hundred
IF SubString(@num,7,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,7,2))
End
Else if Len(@Num) = 9
-- Ten Crore
Begin
Set @Return = dbo.GetTextValue(SubString(@Num,1,2)) + @Crores
If SubString(@Num,3,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,3,2)) + @Lakhs
If SubString(@Num,5,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,5,2)) + @Thousand
If SubString(@Num,7,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,7,1)) + @Hundred
IF SubString(@num,8,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,8,2))
End
Else if Len(@Num) = 10
-- Hundred Crore
Begin
Set @Return = dbo.GetTextValue(Substring(@Num,1,1)) + @Hundred
IF Substring(@Num,2,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,2,2))
Set @Return = @Return + @Crores
If SubString(@Num,4,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,4,2)) + @Lakhs
If SubString(@Num,6,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,6,2)) + @Thousand
If SubString(@Num,8,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,8,1)) + @Hundred
IF SubString(@num,9,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,9,2))
End
Else if Len(@Num) = 11
-- Thousand Crore
Begin Set @Return = dbo.GetTextValue(Substring(@Num,1,1)) + @Thousand
IF SubString(@Num,2,1) '0'
Set @Return = @Return + dbo.GetTextValue(Substring(@Num,2,1)) + @Hundred
IF Substring(@Num,3,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,3,2))
Set @Return = @Return + @Crores If SubString(@Num,5,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,5,2)) + @Lakhs
If SubString(@Num,7,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,7,2)) + @Thousand
If SubString(@Num,9,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,9,1)) + @Hundred
IF SubString(@num,10,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,10,2))
End
Else if Len(@Num) = 12
-- Ten thousand Crore
Begin Set @Return = dbo.GetTextValue(Substring(@Num,1,2)) + @Thousand
IF SubString(@Num,3,1) '0'
Set @Return = @Return + dbo.GetTextValue(Substring(@Num,3,1)) + @Hundred
IF Substring(@Num,4,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,4,2))
Set @Return = @Return + @Crores If SubString(@Num,6,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,6,2)) + @Lakhs
If SubString(@Num,8,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,8,2)) + @Thousand
If SubString(@Num,10,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,10,1)) + @Hundred
IF SubString(@num,11,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,11,2))
End
Else if Len(@Num) = 13
-- Lakh Crore
Begin Set @Return = dbo.GetTextValue(Substring(@Num,1,1)) + @Lakh
If Substring(@Num,2,2) '00'
Set @Return = @Return + dbo.GetTextValue(Substring(@Num,2,2)) + @Thousand
IF SubString(@Num,4,1) '0'
Set @Return = @Return + dbo.GetTextValue(Substring(@Num,4,1)) + @Hundred
IF Substring(@Num,5,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,5,2))
Set @Return = @Return + @Crores
If SubString(@Num,7,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,7,2)) + @Lakhs
If SubString(@Num,9,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,9,2)) + @Thousand
If SubString(@Num,11,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,11,1)) + @Hundred
IF SubString(@num,12,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,12,2))
End
Else if Len(@Num) = 14
-- Ten Lakh Crore
Begin Set @Return = dbo.GetTextValue(Substring(@Num,1,2)) + @Lakhs
If Substring(@Num,3,2) '00'
Set @Return = @Return + dbo.GetTextValue(Substring(@Num,3,2)) + @Thousand
IF SubString(@Num,5,1) '0'
Set @Return = @Return + dbo.GetTextValue(Substring(@Num,5,1)) + @Hundred
IF Substring(@Num,6,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,6,2))
Set @Return = @Return + @Crores If SubString(@Num,8,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,8,2)) + @Lakhs
If SubString(@Num,10,2) '00'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,10,2)) + @Thousand
If SubString(@Num,12,1) '0'
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,12,1)) + @Hundred
IF SubString(@num,13,2) '00'
Set @Return = @Return + 'And '
Set @Return = @Return + dbo.GetTextValue(SubString(@Num,13,2))
End
If @Dec '.00'
Set @Return = @Return + 'Rupees And ' + dbo.GetTextValue(SubString(@Dec,2,2)) + 'Paise Only'
ELSE
Set @Return =@Return+'Zero Rupees Only'
Return @return
End
CREATE Function [dbo].[GetTextValue] ( @dblNumber Numeric )
Returns Varchar(1000)
As
Begin
Declare @StrWord Varchar(400)
SET @strWord = Case @dblNumber
When 1 Then 'One '
When 2 Then 'Two '
When 3 Then 'Three '
When 4 Then 'Four '
When 5 Then 'Five '
When 6 Then 'Six '
When 7 Then 'Seven '
When 8 Then 'Eight '
When 9 Then 'Nine '
When 10 Then 'Ten '
When 11 Then 'Eleven '
When 12 Then 'Twelve '
When 13 Then 'Thirteen '
When 14 Then 'Fourteen '
When 15 Then 'Fifteen '
When 16 Then 'Sixteen '
When 17 Then 'Seventeen '
When 18 Then 'Eighteen '
When 19 Then 'Nineteen '
When 20 Then 'Twenty '
When 21 Then 'Twenty One '
When 22 Then 'Twenty Two '
When 23 Then 'Twenty Three '
When 24 Then 'Twenty Four '
When 25 Then 'Twenty Five '
When 26 Then 'Twenty Six '
When 27 Then 'Twenty Seven '
When 28 Then 'Twenty Eight '
When 29 Then 'Twenty Nine '
When 30 Then 'Thirty '
When 31 Then 'Thirty One '
When 32 Then 'Thirty Two '
When 33 Then 'Thirty Three '
When 34 Then 'Thirty Four '
When 35 Then 'Thirty Five '
When 36 Then 'Thirty Six '
When 37 Then 'Thirty Seven '
When 38 Then 'Thirty Eight '
When 39 Then 'Thirty Nine '
When 40 Then 'Fourty '
When 41 Then 'Fourty One '
When 42 Then 'Fourty Two '
When 43 Then 'Fourty Three '
When 44 Then 'Fourty Four '
When 45 Then 'Fourty Five '
When 46 Then 'Fourty Six '
When 47 Then 'Fourty Seven '
When 48 Then 'Fourty Eight '
When 49 Then 'Fourty Nine '
When 50 Then 'Fifty '
When 51 Then 'Fifty One '
When 52 Then 'Fifty Two '
When 53 Then 'Fifty Three '
When 54 Then 'Fifty Four '
When 55 Then 'Fifty Five '
When 56 Then 'Fifty Six '
When 57 Then 'Fifty Seven '
When 58 Then 'Fifty Eight '
When 59 Then 'Fifty Nine '
When 60 Then 'Sixty '
When 61 Then 'Sixty One '
When 62 Then 'Sixty Two '
When 63 Then 'Sixty Three '
When 64 Then 'Sixty Four '
When 65 Then 'Sixty Five '
When 66 Then 'Sixty Six '
When 67 Then 'Sixty Seven '
When 68 Then 'Sixty Eight '
When 69 Then 'Sixty Nine '
When 70 Then 'Seventy '
When 71 Then 'Seventy One '
When 72 Then 'Seventy Two '
When 73 Then 'Seventy Three '
When 74 Then 'Seventy Four '
When 75 Then 'Seventy Five '
When 76 Then 'Seventy Six '
When 77 Then 'Seventy Seven '
When 78 Then 'Seventy Eight '
When 79 Then 'Seventy Nine '
When 80 Then 'Eighty '
When 81 Then 'Eighty One '
When 82 Then 'Eighty Two '
When 83 Then 'Eighty Three '
When 84 Then 'Eighty Four '
When 85 Then 'Eighty Five '
When 86 Then 'Eighty Six '
When 87 Then 'Eighty Seven '
When 88 Then 'Eighty Eight '
When 89 Then 'Eighty Nine '
When 90 Then 'Ninety '
When 91 Then 'Ninety One '
When 92 Then 'Ninety Two '
When 93 Then 'Ninety Three '
When 94 Then 'Ninety Four '
When 95 Then 'Ninety Five '
When 96 Then 'Ninety Six '
When 97 Then 'Ninety Seven '
When 98 Then 'Ninety Eight '
When 99 Then 'Ninety Nine '
When 100 Then 'One hundred '
else ' '
End
Return @strWord
End
Regards,
Rahul

Dear Rahul,
Try this,
->> Create 1 UDF in Header on Requrie Documents (ex. Marketing Documents).
->> Create 3 Function in MSSQL Server Management.
->> Create 1 FMS in Query Generator and save as Query Manager then Assign to UDF for Amount in Words.
for example:
Create UDF in Header on Marketing Documents.
->> Choose Tools on Top menu.
->> User - Defined Fields. -> User Manage Fields.
->> Open the User Manage Fields Widnow.
->> Marketing Documents. -> Title.
->> Select Title and Click Add button in Bottom on User Manage Fields Window.
->> Create Amount in Words UDF(Code, Discription and Type - Character) and Add the UDF.
Create Function in MSSQL Server Management.
Check this Link, (have 3 Functions in Link).
http://techcreeze.blogspot.com/2008/11/convert-amount-into-words-according-to_15.html
1st Funciton - to Convert one Digit Number to words
2nd Funciton - to convert 2 digit number to words.
3rd Funciton - to convert amt in numbers to words.
->> Open the MSSQL Server Management Window.
->> Choose your Company database and Create NEW Query.
->> Create 3 Function Queries one by one.
->> Create 3 NEW Query Tab and 1st one put the 1st Function then Run the Function. and
2nd New Query tab put the 2nd Function then Run the Function.
3rd New Query tab put the 3rd Function then Run the Function.
Create FMS in Query Generator and Save as Query Manager.
->> Adminstration.
->> Reports. -> Query Generator.
->> Open the Query Generator and put the below FMS query.
for example : Purchase Order Doc. Toal(in wrods).
declare @Doc_total numeric (19,6)
set @Doc_total=$[OPOR.DocTotal]
select dbo.fNumToWords (@Doc_total)
->> Assign the FMS in UDF on Purchase Order.
->> Auto Refresh of Document Total.
Ex.
1. Goto the UDF and Clcik ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select Document Total.
6. Check the Display Saved Values.

Amount in words difficulties

Good Day,
This is my first time to post here, Could you please help me about the printing on checks
Scenario, some of the checks has a value of 33,717.95 but when amount in words it printed "thrity - three thousand seven hundred and seventeen pesos and 95/100 only". Another one is 109,672.38 amount in words is "One hundred and nine thousand six hundred seventy - two pesos and 38/100 only"
Where can i also delete the pesos word on the amount in words?
Edited by: Carlito Go on Jun 23, 2011 9:57 AM

Hi
Try this,
->> Create 1 UDF in Header on Outgoing Payments.
->> Create 3 Function in MSSQL Server Management.
->> Create 1 FMS in Query Generator and save as Query Manager then Assign to UDF for Amount in Words.
Create UDF in Header on Outgoing Payments.
->> Choose Tools on Top menu.
->> User - Defined Fields. -> User Manage Fields.
->> Open the User Manage Fields Widnow.
->> Payments. -> Title.
->> Select Title and Click Add button in Bottom on User Manage Fields Window.
->> Create Amount in Words UDF(Code, Discription and Type - Character) and Add the UDF.
Create Function in MSSQL Server Management.
Check this Link, (have 3 Functions in Link).
http://techcreeze.blogspot.com/2008/11/convert-amount-into-words-according-to_15.html
1st Funciton - to Convert one Digit Number to words
2nd Funciton - to convert 2 digit number to words.
3rd Funciton - to convert amt in numbers to words.
->> Open the MSSQL Server Management Window.
->> Choose your Company database and Create NEW Query.
->> Create 3 Function Queries one by one.
->> Create 3 NEW Query Tab and 1st one put the 1st Function then Run the Function. and
2nd New Query tab put the 2nd Function then Run the Function.
3rd New Query tab put the 3rd Function then Run the Function.
Create FMS in Query Generator and Save as Query Manager.
->> Adminstration.
->> Reports. -> Query Generator.
->> Open the Query Generator and put the below FMS query.
SELECT dbo.fNumToWords($[OVPM.CheckSum])
->> Assign the FMS in UDF on Outgoing Payments.
->> Auto Refresh of REMARKS.
Ex.
1. Goto the UDF and Clcik ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select REMARKS.
6. Check the Display Saved Values.
Note: Check Payments should need the Remarks in Comments field because Remarks field is AutoRefresh field.
IF You will not put the Remarks in Comments field. Amount in Words will not Retrieve(Display) in UDF
Regards,
Jenny

Can I use Word for Mac 2004 to write basic solver/Macros programs?

I just bought the new macbook aluminum unibody. I am in college and am taking computer programming in fall, I need to be able to write basic programs that utilize macros and solver. I spoke with one mac person who told me I would need to buy parallels, the microsoft OS and then microsoft word for Microsoft OS.
However, that costs upwards of 200$ for a class I am only going to be taking for 2 months. Someone else has told me that the 2004 version of Word for Mac has macros abilities on it (those that are not on the current version, but that the 2011 version will have). Can I just use the 2004 version? Or does anyone have other suggestions?

Office 2004 and Other Applications Don't Work in Lion/Mountain Lion
If you have Office 2004 which is a PPC-only suite, it will not work in Lion/Mountain Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
As for other software, any PPC-based software will not run in Lion or Mountain Lion because Rosetta is no longer part of OS X. You will need to upgrade to Intel versions of the software.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

Function for amount into words

hi friends,
           can any one tell from which function module we can convert amount in figures into words.
input   -> 50,000
output -> fifty thousands
plz. help.
it's urgent

HI
use SPELL_AMOUNT
data: words type spell.
call function 'SPELL_AMOUNT'
exporting
    amount          = '100000'
*   CURRENCY        = ' '
*   FILLER          = ' '
*   LANGUAGE        = SY-LANGU
importing
    in_words        = words.
if words-word = 'ONE HUNDRED THOUSAND'.
words-word = '1 LAKH'.
endif.
write:/ words-word.
display amount in words (USD) including cents
convert amount in no's to words
/community [original link is broken]
<b>Reward if usefull</b>

HT5636 I was typing in a word for Mac document and I hit the apple key and the numeral 8 at the same time now all of my documents have these strange symbols please help

I was typing in a word for Mac document and I hit the apple key and the numeral 8 at the same time now all of my documents have these strange symbols please help

Simply type command 8 again. That toggles the "show paragraphs" function.

I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"- it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"… it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

Any help here...
http://support.microsoft.com/kb/288117
http://www.macworld.com/article/1154785/welcomebackvisualbasic.html

Help reqd for printing the word text into two lines(AMOUNT in Rupees)

Hi all,
Im working for cheque printing and in the Amount in words column....im getting the text in a single line...as i've made it as in my script.
(im moving the rate in to amount thru FM "HR_IN_CHG_INR_WRDS"....
and it displaying into a single line....)
But in every bank cheque...we have only a limit space for the first line and balance words should come in to the next line....How to achieve this in my form print.(when im giving the cheque(laser print) inside the printer for print)...
*******FYI..
now im getting it as
RUPEES Ninety Seven Thousand Thirty seven and four paise only.(its going out in my cheque as it's coming in a single line,going beyond the words column)
the above one...i want to print it as two lines as like in normal cheque...
what condition i've to give and how to split the text or make it to continue in the second line....
Pls do the needful with any examples or any coding.....
help needed
thanks & regards
sankar

hi Nehal,
the below one is my coding part........FYI
DATA AMT LIKE REGUD-WAERS.
data: words(120) type c,AMOUNT(120).
data: ant like PC207-betrg,t like reguh-vblnr,t1 type int4.
FORM WORDS TABLES intab
STRUCTURE itcsy outtab
STRUCTURE itcsy.
READ TABLE intab INDEX 1.
   t   = intab-value.
select single RWBTR from reguh into ant where vblnr eq t.
ant = ant * ( -1 ).
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
AMT_IN_NUM               = ant
IMPORTING
AMT_IN_WORDS             = words.
amount = words.
READ TABLE outtab INDEX 1.
MOVE WORDS TO outtab-value.
MODIFY outtab INDEX 1.
ENDFORM.                    "diff
with the above code,im getting the amount field in a single line and it goes out beyond the line specified.
How to split it as a length basis as u said....pls explain in detail...
thanks & regards
sankar

Impact of Sales Write off amounts on Tax liability

Hi Friends ,
Did any of you had tis situation at your client ? I want to know the impact of tax liabilitry on sales write off amounts , will it reduce the tax liability if sales write off amounts or in other words the bad debts are considered for tax calcualtion. Any inputs greatly accepted,
thank you ,

I am trying to post the tax portion to the tax liability account during write-off in IS-U FICA. Is there a way I can post the tax portion on the invoice to the tax liability account instead of posting the entire amount to the expense account? Any help is highly appreciated.

Funtion to write numeric amount in words for printing cheques

Similar Messages

Maybe you are looking for