Fuzzy Lookup cannot use existing index

Hi all,
we have upgraded to SQL Server 2008 R2 from SQL Server 2008 and since then our fuzzy matching process has failed when trying to re-use existing index with the error:
[Fuzzy Lookup] Progress: Warming caches - 0 percent complete
[Fuzzy Lookup [9824]] Warning: Catastrophic failure
[SSIS.Pipeline] Error: component "Fuzzy Lookup" (9824) failed the pre-execute phase and returned error code 0x8000FFFF.
Warming cache property is set to False though.
Has anyone experienced the same error?
When building a new index fuzzy matching runs without problems.
Thanks a lot.
Fran

Hi Fran,
The error may occur due to a memory issue such as the Fuzzy Lookup task consumes high memory buffers. Please try the following steps:
Run the package in 64-bit mode by setting the Run64BitRuntime property of the project to True.
Right click the Fuzzy Lookup task and click “Show Advanced Edior…”
Switch to the Component Properties tab, and set the following properties:
CopyReferenceTable: 0
DropExistingMatchIndex: 0
WarmCaches: False
Hope this helps.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Cannot use existing oracle 10g db as collab suite database

Hi all,
I am trying to simulate colocated IM architecture installation in my test machines. I tried to use my existing Oracle db 10g R2 as my collab suite database. The OUI prompted an error after checking prerequisites:
Oracle Home you have specified is an Oracle 10g 10.2.0.0.0 or higher version and cannot be configured into an Oracle Collaboration Suite Database.
Refering to OCS documentation,
"You need Oracle Database 10g (10.1.0.4.2) for the Oracle Collaboration Suite installation to be successful. If you have an earlier version of database, for example Oracle Database 10g (10.1.0.2) or Oracle Database 10g (10.1.0.3), then you must apply the Oracle Database 10g
Release 1 (10.1.0.4.2) Patchset to this existing Database."
Install Guide 10g R1 B15793-01 Chapter 5.2.1 "You can optionally convert an existing Oracle Database 10g into an Oracle Collaboration Suite Database. The database must be version 10.1.0.5 or higher.."
Deployment Guide 10g R1 B14479-01 Chapter 4These statements indicates that oracle DB 10.1.0.5 or higher can be converted into OCS DB. But the OUI hit me with the error. Have anyone encountered this before? or any idea why? Thanks

did you find out the solution for your issue. I ran into the same problem.

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

Real world use of Lookup, Fuzzy Lookup and Fuzzy Grouping?

Hello Experts,
Could someone please tell me the use of lookup, fuzzy lookup and fuzzy grouping tasks giving one example of each?
I know the work what these tasks do but I want to know in which scenario and for what functionality do we use these tasks?
Appreciate if you write down your own experiences.
Please no URL's of MSDN/TechNet and so on. I am tired reading it.
-Vaibhav Chaudhari

Hello Vaibhav,
A use of lookup: need to verify if a record or a corresponding entry exists in target before inserting it or not, it is also possible to use for merging / syncing data.
Fuzzy Lookup Transformation: is when you need to find similarities in text, in simple words it is the T-SQL SOUNDEX function, does it sound like what it does to you? So if you have say car brand names e.g. BMW and VW this function will confidentially match
these (depends on level chosen) even though they are not closely related. But it would not match BMW to GMC.
Fuzzy Grouping is when you need to just group related text. It is a close cousin to the lookup, but gets applied to text sets and forms them, too. Used for data de-duplication (by match score).
Arthur My Blog

Effect of Force use of non-existing index in program

Hi,
What is the Effect of Force use of non-existing index in program?
We have forced the use of a custom index in our program, i want to know the effect in the program if in the future this index will be deleted or removed from the database?
Thanks a lot!

Hi Freishz,
>
freishz wrote:
> What is the Effect of Force use of non-existing index in program?
> We have forced the use of a custom index in our program, i want to know the effect in the program if in the future this index will be deleted or removed from the database?
Hints note, it is a hint not a command, are ignored by the optimizer if they are not
syntactically and/or semantically correct. An index hint pointing to a non-exisitng index
is semantically not correct -> will be ignored. (A normal costing with the available indexes
is done).
Kind regards,
Hermann

Retrieving specific document using explicit index lookup

The best way to retrieve a specific document seems to be using XmlContainer::getDocument, thus using the default index.
However, I may not have the document name, but instead an ID I have defined a unique index for.
Of course, I can use the XQuery interface to retrieve the document, and it's fast.
It's faster, though, to directly use an index. I can use XmlContainer::lookupIndex in order to do this; it takes an optional parameter "value", and the documentation for 2.3.10 says: "Provides the value to which equality indices must be equal. This parameter is required when returning documents on equality indices, and it is ignored for all other types of indices."
However, the documentation also says that XmlContainer::lookupIndex is deprecated, "in favor of using XmlManager::createIndexLookup and XmlIndexLookup::execute". That recommended approach does not seem to provide a way to look up a specific value. It seems I have to iterate over the index, which is not what I want. Am I missing something?
Michael Ludwig

George,
thanks a lot - should have found this myself, I guess. Working example following:
use strict;
use warnings;
use Sleepycat::DbXml 'simple';
my $id = shift or die "usage: $0 <ID>\n";
my $contfile = $ENV{HOME} . '/dbenv/tv.dbxml';
my $iuri = ''; my $iname = 'ID';
my $istrat = 'unique-node-attribute-equality-decimal';
eval {
    my $mgr = XmlManager->new;
    my $cont = $mgr->openContainer($contfile, Db::DB_RDONLY);
    my $sval = XmlValue->new(XmlValue::DECIMAL, $id);
    my $idx = $mgr->createIndexLookup($cont, $iuri, $iname, $istrat, $sval);
    my $ctx = $mgr->createQueryContext(
        XmlQueryContext::LiveValues,
        XmlQueryContext::Lazy);
    my $res = $idx->execute($ctx);
    while ($res->hasNext) {
        $res->next(my $val);
        print $val;
my $ex;
if ($ex = catch XmlException) {
    die join "\n", ref $ex, $ex->what,
        'Exception Code: ' . $ex->getExceptionCode,
        'DbErrno: ' . $ex->getDbErrno;
elsif ($ex = catch std::exception) { die join "\n", ref $ex, $ex->what }
elsif ($@)                         { die $@ }For an alternative approach using setLowBound(), apply the following diff:
12c12,13
<     my $idx = $mgr->createIndexLookup($cont, $iuri, $iname, $istrat, $sval);
my $idx = $mgr->createIndexLookup($cont, $iuri, $iname, $istrat);
$idx->setLowBound( $sval, XmlIndexLookup::EQ );Thanks,
Michael

ERROR ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found

Hi,
SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -ctf I C:/temp/51030721/EXP2/DATA/SAPSSRC.STR C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.TSK ORA -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195133
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: ABTREE created #20071018195134
(IMP) INFO: import of ABTREE completed (39 rows) #20071018195134
(DB) INFO: ABTREE~0 created #20071018195134
(DB) INFO: AKB_CHKCONF created #20071018195134
(IMP) INFO: import of AKB_CHKCONF completed (0 rows) #20071018195134
(DB) INFO: AKB_CHKCONF~0 created #20071018195134
(DB) INFO: AKB_INDX created #20071018195134
(IMP) INFO: import of AKB_INDX completed (0 rows) #20071018195134
(DB) INFO: AKB_INDX~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO2 created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO2 completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO2~0 created #20071018195134
(DB) INFO: APTREE created #20071018195134
(IMP) INFO: import of APTREE completed (388 rows) #20071018195134
(DB) INFO: APTREE~0 created #20071018195134
(DB) INFO: APTREE~001 created #20071018195134
(DB) INFO: APTREET created #20071018195134
(IMP) INFO: import of APTREET completed (272 rows) #20071018195134
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195134
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195314
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP INDEX "APTREET~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195315
I'm getting this error "duplicate keys found". I'm finished installing the central instance and during the database instance, i got this error. I'm installing BW 3.5 on x64 windows server 2003 platform. I'm using NU kernel 6.40.
Thanks for your suggestions on how to resolve this error.
Reward points guaranteed.

Issue solved by deleting central and database instance and started a new build. it finished without an error.
Thank you.

Fuzzy Lookup Formula/Logic

Could someone from the dev team please share as much details as you're comfortable with regarding the
formula or logic used to calculate the similarity for a fuzzy lookup match?

Hi Andres,
Fuzzy Lookup matches input records that are "dirty" (because of misspellings, truncations, missing or inserted tokens, null fields, unexpected abbreviations, and other irregularities) with clean records in a reference table. Fuzzy Lookup can help
find data in large tables when your data has a corrupt or incomplete string key.
Fuzzy Lookup uses the Error-Tolerant Index (ETI) to find matching rows in the reference table. Each record in the reference table is broken up into words (also known as tokens), and the ETI keeps track of all the places in the reference table where a particular
token occurs.
For moe details about Fuzzy Lookup, please refer to the following documents:
Fuzzy Lookup and Fuzzy Grouping in SQL Server Integration Services 2005
Using Fuzzy Lookup Transformations in SQL Server Integration Services
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to use cfloop index value as part of another variable

Hello,
I have a RATE form that first asks "how many rates will you
be adding?" that answer generates a series of form elements based
on the answer. You then have a form grid to populate, 3 values for
each rate (price, code, name).
This part works fine. The issue is now I need to INSERT the
values into the table, so I need to use the INDEX value of the
cfloop to recreate the amount (and names) of the fields in the
INSERT statement. How do I escape, or re-create the evaluated form
elements ( in which their count is #i# as the loop goes) when I
need to evaluate for #i# AND evaluate for #form.sku_i_name# at the
same pass?
I am passing, for example, #form.sku_2_Name# where that might
equal "Half Page". The number 2 in that variable was assigned
during the form creation by the current index of a cfloop. Since my
action (insert) page does not know how many (out of 50 possible)
sku's are coming, how do I use the skuCount (another hidden value
passed as well) to create a proper INSERT SQL command when I need
to eval the form element and the index at the same time?
Obviously #sku_#i#_Name# does not work, and #sku_i_Name# does
not either... I know this can be done, and that I am just doing it
wrong.
Thanks for any help!

bigbrain28 wrote:
> Thank You, cfsearching! I don't quite understand 100%
how it works
As all three of us indicated you use array notation for this
type of
requirement. In ColdFusion you can use array notation or dot
notation
to access structure data. Almost all data in ColdFusion is
now some
type of structure.
I.E. #Form['myField']# is the same as #Form.myField#.
The advantage is that with array notation you can do things
you can not
do with dot notation. You can reference elements that have
keys that
are illegal variable names such as one with a space.
I.E. #url['my field'] is allowed, #url.my field# would fail
or course.
And you can concatenate the key string as we did with your
example.
I.E. #Form['aString' & aVariable]#
There are many powerful things one can do with this
knowledge. One can
access record sets with array notations. This can allow for
very
sophisticated parsing of a record set.
I.E. #myQuery['column'][row]#
You can dynamical call a variable. Thus creating dynamic code
that does
not even need to know what variables exist until run time.
I.E. #variables[anyName]#
This just scratches the surface.

Use of index based on an attribute when doing an order by

Hi,
I create a table and its indexes like this:
create table poc_wip2 of xmltype
xmlschema "http://www.derwent.co.uk/wpi.xsd" element "WPI"
alter table poc_wip2
add constraint poc_wip2_pk primary key
(XMLDATA."BibPt"."PDOC_COUNTRY",
XMLDATA."BibPt".pdoc_serial, XMLDATA."BibPt".pdoc_kind)
create index pan_index on poc_wip2 t
(extractvalue(value(t),'/WPI/BibPt/@pan'))
Now when I run the query:
select extractvalue(value(t),'/WPI/BibPt/@pan')
from poc_wip2 t
order by extractvalue(value(t),'/WPI/BibPt/@pan')
I can see that a full table scan occurs. I cannot get the query to use the index built on the pan attribute.
I tried adding a INDEX_FFS hint, but this does not work when I name the pan_index, it only works with
INDEX_FFS(t), in which case the query then uses the primary key index.
Is it possible to get the query to use the pan_index index?
Thanks
Pete

Hi
Create a restricted key figure with the ZSE_BPNV1 and mention the values of the attribute and display the values
Here you can mention your charecteristic and attrribute value both with the key figure
Assign points if useful
Regards
N Ganesh

Restrict the use of index while quering

Hi All
I have a simple emp table with columns empid, name, sal. Empid has a primary key imposed.
Now when i write a statement like this,
select * from emp where empid = <value>;
the optimizer will make use of index.
The question is........... is there anyway to make oracle bypass the use of index without change in above query.

Why do you worry of performance issues when the table size is small , when it is huge and the column you r trying use in the query is also indexed the oracle finds the Best execution method to do the execution whether index exists or not , Oracle has a very intelligent Optimizer and no need to use hints unless and until it is really mandatory or when u r using a very complex query where Oracle is not able to deduce the best Execution plan . But by all means you should look at the execution plan how a cerain query Oracle knows of doing it or when u have a diferering opinion then only at that point you force a Optomizer Hint . For other normal cases like the one you are asking it is best to get the results how Oracle executes it and no forcing is required .

UNUSED EXISTING INDEXES / Index usage

We are using CRM 2007, Netweaver 7.0 with DB2 UDB v9.1 fixpack4 on AIX.
Is there a way to find out UNUSED EXISTING INDEXES for tables ? We have close 12 indexes on the crmd_order_index table and want to find out if some of them can safely deleted. Is there any way to monitor index usage in SAP ? Is there any toold to aid this ?
Pls advise.
thank you
regards
Laxmi

Laxmi,
I am not aware of any such tools with DB2 9.1. However, "last_used" columns are being added to various catalog tables in DB2 9.7. Below is an excerpt from a slide presented in the TLU2008A "DB2 LUW V9.7 Cobra u2013 Storage is Charmed" session.
The last reference time of an object will now be maintained in the LASTUSED column of
the corresponding catalog table for the object
u2013 SYSCAT.INDEXES.LASTUSED (prior to V9.7 db2pd u2013tcbstats indexes)
u2013 SYSCAT.TABLES.LASTUSED
u2013 SYSCAT.DATAPARTITIONS.LASTUSED
u2013 SYSCAT.PACKAGE.LASTUSED
The LASTUSED column is of type DATE (default value is 1/1/0001)
Use Cases:
u2013 Detach table partitions that are no longer actively used (esp. when not partitioned by time)
u2013 Determine inactive or infrequently used indexes
u2013 Easily identify tables which are no longer in use
u2013 Get rid of unused packages
The presenter said the code will begin populating these columns in an upcoming fixpack.
Regards,
Rick

Design Problem When SSIS Get String From Web to Do Fuzzy Lookup

Hi!
In my previous post Search Data by Fuzzy Lookup in Real Time
Scenario, I've tested required functions to build a sample website and SSIS, now it's time to polish my design. Since user will query a name from Web, SSIS is supposed to get a string to do
Fuzzy Lookup. I wonder how I can design to let fuzzy lookup consume String as input instead of a structure (like OLE DB, EXCEL, Flat File, etc ) .
Now I use table as datasource to do a fake input. The SQL_CMD variable will dynamically be replaced from Web input. It seems Fuzzy Lookup component needs a structure to be an input.
Do you have any design idea for my scenario ? Thank you!

How are you executing the fuzzy lookup package ? Is it using command line or using asp.net code ?
In SSIS package we can create variables and assign any strings to these variables while running the ssis package in asp.net.
Refer
http://www.codeproject.com/Articles/28096/Excecute-SSIS-package-DTSX-from-ASP-Net
Also have you gone through SOUNDEX option of TSQL
http://www.tek-tips.com/faqs.cfm?fid=4110
Regards, RSingh

Cannot use duplicate table name error in AMDP

Hi Experts,
I'm developing an application which has the following architecture
SAP UI5->Gateway->ABAP Managed DB procedures(AMDP)->HANA SP(Stored Procedure)
We are having a very peculiar problem where the gateway service works inconsistently for the same input data.
i.e If I execute the same service n number of times, I get the results successfully for say n-3 times but the other 3 times I get a "RFC Error :Error while executing Database procedure"
There is no change in the input data or DB table data during all the executions.
Running the stored procedure stand alone in HANA studio works all the time.
We tried executing the AMDP from SE24 and the same behavior occurred.
When trouble shooting we found that the exception occurs inside the AMDP when the call db procedure statement is executed.
Could you please advise what could be the possible reason for this any tuning parameter/unavailability of db connections?
Or could you please suggest some other troubleshooting mechanism by which we can zero in on the cause?
When I go in the debug mode I can see the exact error as
cannot use duplicate table name: [288] SAPXXX.ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE#stub#20140905055908: line 15 col 3 (at pos 492): cannot use duplicate table name exception:
where ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE is the AMDP class and method. SAPXXXis the schema.

I reported this to Adobe customer support on 11/29, and here is their response:
Wednesday, December 5, 2007 12:51:27 PM PST
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop Elements® 6.0.
I understand that images are deleted if you accidentally try to move
them to a folder that already includes a file of the same name.
Thank you for bringing this to our attention. I was able to replicate
this behavior as well. The best method to report errors of this nature
is using the following form on our website:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
Kind regards,
Alan C.
Adobe Web Support

My icloud account was locked yesterday due to server error.26/11/2012 18:57-19:25 CET. I cannot use it because I cannot answer the security question wright. What can I do? Help please

My icloud account was locked yesterday due to server (iCloud) Faillure 26/11/12. PM
I cannot use the account because I canot answer my security question right. Also my second e-mail adress was no activated, so I cannot activate the icloud account via e-mal
What Can I do?
Thank You

It would worth your asking in the Final Cut Pro X forum - someone else may have experienced the same problem.
I assume you have already trashed Preferences/ByHost/com.apple.dotmac... (several files beginning with this) and (same path) com.apple.idisk - though I suspect the problem lies rather with the individual programs which are trying to access something on the non-existent iDisk.

Fuzzy Lookup cannot use existing index

Similar Messages

Maybe you are looking for