Cannot use existing oracle 10g db as collab suite database

Hi all,
I am trying to simulate colocated IM architecture installation in my test machines. I tried to use my existing Oracle db 10g R2 as my collab suite database. The OUI prompted an error after checking prerequisites:
Oracle Home you have specified is an Oracle 10g 10.2.0.0.0 or higher version and cannot be configured into an Oracle Collaboration Suite Database.
Refering to OCS documentation,
"You need Oracle Database 10g (10.1.0.4.2) for the Oracle Collaboration Suite installation to be successful. If you have an earlier version of database, for example Oracle Database 10g (10.1.0.2) or Oracle Database 10g (10.1.0.3), then you must apply the Oracle Database 10g
Release 1 (10.1.0.4.2) Patchset to this existing Database."
Install Guide 10g R1 B15793-01 Chapter 5.2.1 "You can optionally convert an existing Oracle Database 10g into an Oracle Collaboration Suite Database. The database must be version 10.1.0.5 or higher.."
Deployment Guide 10g R1 B14479-01 Chapter 4These statements indicates that oracle DB 10.1.0.5 or higher can be converted into OCS DB. But the OUI hit me with the error. Have anyone encountered this before? or any idea why? Thanks

did you find out the solution for your issue. I ran into the same problem.

Similar Messages

Install APEX to work on existing Oracle 10g R1 database

I want to use APEX on an existing Oracle 10g R1 database. If I install it normally with the program downloaded from your site, it installs its own database that you use.
How can I set / install it to use the existing database instead of its own database?
Elsie Pretorius

Hi guys,
Thanks for the info and input. Is there anybody have sucessfully done this. Most of the info that out there, the README in the patchset all pointing to upgrading the OCS, not installing the OCS on top of an existing 10g AS and DB. I'm thinking installing the OCS R2, and then patching and upgrade it to 9.0.4.2 or 4.3 and then point or move it to the existing 10AS and DB. This is where I'm quit blur at the moment.
Anyway thank for all the info.
Regards
Din

ERROR: Install cannot verify the oracle 10g Database

I just completed installation of the SES 10.1.8.2 version and am now trying to apply the 10.1.8.4 Service Pack. After the OUI screen asks for my sys password, I click on Next and receive a popup error message that reads,
Install cannot verify the oracle 10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct.
The installer log file (installActions2010-04-15_08-56-19PM.log) shows this:
*** Specify the SYS Password Page***
Calling Query EmQueries4.2.2 checkUserExists
schemaName = SYS
schemaPassword = Protected value, not to be logged
connectString = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=HostNodeName_1)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Ses01.HostNodeName_1)))
userName = EQSYS
Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: Got minus one from a read call
Error:*** Alert: Install cannot verify the Oracle10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct. ***
User Selected: Yes/OK
===
I've verified that I can login as EQSYS using sqlplus. Also tested that I can login as sys, too. I've also tested the login using the Admin console and that is fine, too.
Any ideas on what is causing this or how to fix it is most welcome as I've not encountered this error before when installing SES or a service pack. I've even tried the OUI for Service pack 10.1.8.3 but also get the same error.
I've checked the listener.ora and tnsnames and they are OK. I've checked and the listener is running and so is the DB.
Right now, I have the Oracle SES instance up and running at 10.1.8.2 but need to upgrade this to the same level as the other SES search nodes.
Edited by: user8655787 on Apr 15, 2010 2:18 PM
My listener.log file is showing this message each time, I run the OUI and enter the sys password and click "Next"
15-APR-2010 23:17:05 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client

A couple of other things that I have tried but have had no affect. I'm still getting the same error:
1. Tried recreating the orapwd file
orapwd file=orapwprdses01 password=prdses01
And make sure that the pfile or spfile has:
remote_login_passwordfile='EXCLUSIVE'
another OTN posting said to try this:
1. Go to directory $ORACLE_HOME/network/admin
2. Modify sqlnet.ora file with following parameter:
tcp.validnode_checking = no
3. If you don't want to disable this, you can put the machine names as follows:
tcp.invited_nodes=(machine1, machine2)
3. Bounce the listener.
.... but, I'm still getting the same error when trying to run the .runInstaller OUI for the service pack for 10.1.8.4.

Can we use replication usings oracle 10g steams for EBS r12 database?

HI,
We are using EBS 12.0.6 and database 10.2.0.3 on linux 32-bit/64-bit OS (Multi-Node env).
Actually We want to decrease the load of custom reports on actual production system, so thats why
we need reports server and as my past experience I had used oracle streams for replication with simple schema based replication and tablespace replication also.
So, please educate me, that can i used the oracle 10g streams for EBS schemas like APPS, GL ,INV, PO, ONT, ODM, AR, AP, CM etc?
Please provide us the above related env docs and road Map.
If you have any other way to create the Report Server?
Regard,
Fayaz Ahmed

Hi,
We are not in a position to upgrade the EBS from 12.0.6 to 12.1, because this is lengthy task, but we had already tested technically it in test env, but functional testing in pending.
Now we want to immediate solution if possible, because this is production?
So, please suggest another.
regards

How to use the Oracle 10g JDBC OCI driver in JBoss ?

Greetings,
I deployed ojdbc14.jar in JBoss and I created an Oracle datasource. I have the following questions:
1. In the datasource descriptor file I have:
<connection-url>jdbc:oracle:oci:@(description=(address=(host=localhost)(protocol=tcp)(port=1521))(connect_data=(SERVICE_NAME=xe)))</connection-url>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
Is it enough in order to use the Oracle 10g JDBC OCI driver ?
2. After having looked-up the datasource and created a connection, the classe of these objects are org.jboss.resource.adapter.jdbc.WrapperDataSource and, respectivelly, org.jboss.resource.adapter.jdbc.WrappedConnection. How can I have access to oracle.jdbc.oci and oracle.jdbc.pool packages ?
Many thanks in advance,
Nicolas

Hello
We were banging our heads on a similar thing, maybe this will help
We needed to convert the wrapped connection to an OracleConnection so that we could do a proxy switch, but maybe you could apply it to your situation anyway
1-you have to convert the Connection object to an OracleConnection in order to use the method that does the proxy switch
The method to do this is getInnermostDelegate()
Once you call this method, you get a new Connection object that can be cast to an OracleConnection object
See below for the snippet of code
// now switch the user and reselect
if (conn instanceof DelegatingConnection) {
properties.put("PROXY_USER_NAME","peter/peter");
oraConn =((DelegatingConnection)conn).getInnermostDelegate();
if (oraConn == null)
out.println("oraConn is null\n");
((OracleConnection)oraConn).openProxySession(OracleConnection.PROXYTYPE_USER_NAME,properties);
2-you have to put a setting in the xml file in conf/Catalina/localhost that allows you to call the getInnermostDelegate() method
By default, Tomcat does not allow you to call this method, it will always return null
You have to change the xml to allow it to return an object
It seems that WebSphere and Tomcat both frown on vendor-specific methods that do not comply with the JDBC standards, but do allow it
Here is the setting:
<parameter>

<name>accessToUnderlyingConnectionAllowed</name>
<value>true</value>
</parameter>
Note, this setting was also put in the conf/server.xml file
Thanks
Peter

Oracle 10g is an auto managed database. Why ?

Oracle 10g is an auto managed database. Why ?
I have read that with 10g version, Oracle database will need very less management, since it can be configured to automanage itself. Sounds not believable.
Apart from auto extending tablespaces, what others tasks can be automanaged in Oracle DB 10 G release ?
Please discuss.
Gony

Wow I feel like I'm back in college... are you in school?
How about ASSM?
All kinds of things on that from google.
http://www.google.com/search?hl=en&rlz=1C1GGLS_enUS291US303&q=oracle+assm&aq=f&oq=&aqi=g3
http://www.google.com/search?hl=en&rlz=1C1GGLS_enUS291US303&q=automating+oracle+databases&aq=f&oq=&aqi=
P.S. What is this all about? RMAN - Gony's reading task for 07/11/2009
Edited by: TimS on Jul 10, 2009 4:26 PM

I'm debutante in oracle 10g how to create a database with picture?

I'm debutante in oracle 10g how to create a database with picture? help please

d7401ec1-d4d6-4e54-9eb4-2181ac367d0c wrote:
I'm debutante in oracle 10g how to create a database with picture? help please
Oracle 10g is obsolete. Oracle 11g is already at terminal release.
Have you installed the Oracle rdbms software?
Installing Oracle and Building the Database
If you are going to be a professional DBA, you need to learn to
1) read the documentation
2) wean yourself from dependence on pictures and GUIs.
3) read the documentation
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to docs.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- *Read a chapter a day from the Concepts Manual*.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- *When you have finished reading the Concepts Manual, do it again*.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Does oracle 10g also has developer suite?

Hi,
I have a small doubt regarding release ....
does oracle 10g also has developer suite?

Yes 10g has a developer suite.
you can download it from
http://www.oracle.com/technology/software/products/ids/index.html

How to create new databse in existing oracle 10g

I installed the oracle 10g enterprise edition.. I would like to create a new database inside this oracle 10g so that i can create tables , views, stored proc and else.. in that new databse to support My .net application. I have a script which defines the databse schema. Please any one provide me the script that creates the new databse and users in that ?
Thank you!
Madhu..

hi..
Use DBCA utility to create a new database.Type dbca on the cmd/terminal. A GUI tool will come, with which you can create a database.Also, while installing oracle 10g , there is a option of creating the database in the select configuration option window.Did you do Install Database Software only.
To create manually [http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_5004.htm#SQLRF01204]
HTH
Anand
Edited by: Anand... on Oct 15, 2008 8:54 PM

How to the find the Delete records/Statement used in Oracle 10g database?

Hi all,
I am Using Oracle 10g Database release 2 on Windows 2003 Server Enterprise Edition... Last week One of my user has deleted important records from my database,i need to find who did this... is there any way to find out ...Please Advice me ....One More thing i have not enabled the Auditing features in My database .....
Thank You
Shan

Rajesh Lathwal wrote:
Use log miner ..
Regards
RajeshEven with that, if he wants to know WHO, he will have to have previously enabled extended logging ....

Fuzzy Lookup cannot use existing index

Hi all,
we have upgraded to SQL Server 2008 R2 from SQL Server 2008 and since then our fuzzy matching process has failed when trying to re-use existing index with the error:
[Fuzzy Lookup] Progress: Warming caches - 0 percent complete
[Fuzzy Lookup [9824]] Warning: Catastrophic failure
[SSIS.Pipeline] Error: component "Fuzzy Lookup" (9824) failed the pre-execute phase and returned error code 0x8000FFFF.
Warming cache property is set to False though.
Has anyone experienced the same error?
When building a new index fuzzy matching runs without problems.
Thanks a lot.
Fran

Hi Fran,
The error may occur due to a memory issue such as the Fuzzy Lookup task consumes high memory buffers. Please try the following steps:
Run the package in 64-bit mode by setting the Run64BitRuntime property of the project to True.
Right click the Fuzzy Lookup task and click “Show Advanced Edior…”
Switch to the Component Properties tab, and set the following properties:
CopyReferenceTable: 0
DropExistingMatchIndex: 0
WarmCaches: False
Hope this helps.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using complete oracle 10g features....

I do have the documentation but acccording to my personal experince this forum with gurus aroun here is better
i wud like to noe how to make the best use of forms 10g like
making good graphically appealing form,increased funcationality how to incude flash objects,
n whats the use of using import java classes, import OLE interface and how to select the specific class or the package according to the requirements...i.e how to use and when to use them..!!!
will it be easy to create webbased applications using Jdeveloper or will it b better to use forms....???

my 5 cent:
making good graphically appealing form,what does that mean?
increased funcationality how to incude flash objectsthere is a java-bean that can be used as a "Web-Browser inside forms" that supports Flahs animations ( http://forms.pjc.bean.over-blog.com/article-5029633.html )
n whats the use of using import java classes, Java-classes can be imported to enhance the functionality with logic written in java. The java-coe gets executed on the application-server. An example might be the logic to call a webservice.
import OLE interface OLE is a windows-technique to somehow "remote-control" windows-applications or functionality provided in Active-X-dlls. OLE-calls work on the client (and in 10G require WEBUTIL)
and how to select the specific class or the package according to the requirements...i.e how to use and when to use them..be more specific
will it be easy to create webbased applications using Jdeveloper "42", or in other words, "it depends".
It will be easy if you are capable of the nechnologies you need. JDeveloper is not a technology but a tool for java-development which supports the development of web-applications. But, there are a lot of web-technologies based on java which you can use. For more details you might read some stuff about JEE
or will it b better to use forms....???Also, it depends. There are certain areas where Forms will be better (or easier, or more productive) to use. As forms requires a somehow "fat" client with the installation of the Java-Runtime and certain permissions for the applet to work properly, it may not be the first choice if you implement some public web-application. For "inhouse"-applications run on a companies intranet which deal with "alphanumerical data", forms may be the better choice because of a more Windows-like behaviour and/or its great productivity. (Both are just examples, you'll have to decide which technology to use based on certain reuqirements for a certain application)

Cannot compile with Oracle 10g ProC compiler.

Every time I run the ProC compiler of Oracle 10g I get the following error:
PCC-F-NOERRFILE, unable to open error message file, facility PR2
What does this mean and how do I fix this.
Thanks you
Gilles Ferland

Hi Gilles,
try 'strace proc' and look for open statements.
Try to check the filenames.
HTH,
Toni

Which "Analytic Workspace Manager I have to use with Oracle 10g 10.1.0.4?

I have Oracle 10g 10.1.0.2 and I pallyied patchset OLAP to upgrade to 10.1.0.4, so which version of "Analytic Workspace Manager" I have to install?
Thanks

Hi,
You can find the latest patchset on Metalink. The latest version of workspace manager for your database is 10.1.0.6.0, which is patch 4870951.
Regards,
Ben

Cannot connect to oracle 10g xe

Hi All,
I have installed oracle 10g XE but not able to connect to the db with the password I have provided during installatioin the below err I am getting kindly help
Enter user-name: sys
Enter password:
ERROR:
ORA-03113: end-of-file on communication channel
Enter user-name: system@XE
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus

Thanks all I executed all the steps but still I am getting this error
my version is oracle 10g express edition
OS is windows xp
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-NOV-2007 14:52
:44
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=aak.com)(PORT=1521)))
The listener supports no services
The command completed successfully
Enter user-name: sys@xe as sysdba
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
Message was edited by:
460425

Cannot use existing oracle 10g db as collab suite database

Similar Messages

Maybe you are looking for