FX-restatement package clears out our special translation

Hi,
We have created a special FX-Translation for an account and we do not want the regular FX-Translation to convert the Loc figures into Swedish currency (SEK is the group currency). First we tried to set the ratetype to notrans for that account, but then when we run run the FX-logic file: *RUN_STORED_PROCEDURE=SPRUNCONVERSION([%APP%],[%CATEGORY_SET%,[SEK],[GLOBAL],[%SCOPETABLE%],[%LOGTABLE%]
the FX-restatement package had cleared out special translation. We then tried to remove the ratetype setting from notrans to nothing, but then it just translates the same amount in LOC to sek e.g. 10 in local currency gives 10 in SEK.
Does anybody have an idea about how to leave out this account from the FX-translation without it being cleared out or the same as the Loc value?
Best regards
Robert

I'm not sure if there's a way to force the SPRUNCONVERT to not clear out your custom calc result, but maybe that's still OK. I think the SP does something behind the scenes that's similar to a
*Clear_Destination
*Destination RptCurrency = SEK
and there's no way to turn this off. I faced a similar issue with the SPRUNCONSO SP, and gave up trying to fight it.
Set the RateType=NoTrans, let it clear out the value, and then after that finishes (you probably need a *COMMIT between these blocks of code), calculate this one account using your custom logic. As long as you get the correct result, the extra overhead of the unnecessary clearing is minimal.

Similar Messages

  • I can not load in foxfire, I use Internet explorer use internet. Done the tools, option -change the proxy , didn't work. Cleared out our cookies and double checked that foxfire is allowed through our firewall. Help me, I need foxfire back. Cindy

    I don't know what you need here

    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls
    *http://kb.mozillazine.org/Error_loading_websites
    You can also try to reset (power off/on) the router.

  • How to clear out foreign divested entities at Parent Currency when have CFCTA?

    We have stopped loading some entities which we divested in the prior fiscal year (2013).  Now, in the current fiscal year (2014), the Retained Earning rollforward logic is carrying forward the prior year P12 ending balance.  We can manually adjust out the figures in Enitity Currency in P1 of current year (July 2014) and clear out the ending RE balance, but we still have RE remaining at Parent Currency due to roll forward logic.  Our journals in HFM always reverse in the next period, so it seems that we will need to forever more book an adjustment in Parent Curr Adjs to clear out the RE and the Cumulative Foreign Currency Translation amount.  Has anyone had a similar issue?  How did you remove all Retained Earnings at the Parent Currency levels when you got rid of a company? Thank you.

    Just about every application I've seen has always had some form of rule allowing for historical translation overrides for the equity section.  Some do it by allowing you to adjust the rate the equity is translated at, others do it by allowing you to enter the PC amount you want in EC in a seperate account (Dollar Overrides seems to be a common term) but either way, you'll need that functionality to accomplish this.
    Basically your rules are causing the problem(prior year USD copying across to current year USD), so your rules will need to be the solution.

  • I,have,a,Galaxy,S,and,want,to,clear,out,some,memory.,All,my,epics,are,in,the,cloud,(I,think),but,I,want,them,on,my,external,hard,drive,before,I,delete,them,from,my,phone.,,Do,I,have,to,upload,all,of,the

    I have a GalaxyS5 and want to clear out some memory.  All my pics are in the cloud but I don't want to keep all of them.  After I sort and cull how to I move the keepers to my external hard drive?  Can I do this directly from the cloud?

    rwethereyet,
    Keeping your pictures safe is definitely important! Once you have synced the saved pictures to your phone you can transfer them from the phone to your computer. Are you using the Verizon Cloud Desktop app?
    JohnB_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Programatic import can't clear out a property of data-type="set"

    Our catalog repository has a item-descriptor for a "sku" that has a property named "modelProfiles" which is a data-type="set". This allow our SKUs to have a one-to-many relationship with ModelProfile components.
    We programmatically import and update these SKUs through gsa-xml files. This usually works great, but the problem I am having is that there appears to be no way to "clear out" the set that a given SKU is connected to. I can add to the set, I can reduce the members of the set, but when I try to make an individual SKU's set empty, the BCC project shows the related SKU as unchanged (meaning that it still has all of its SKUs).
    How can I clear out a property of type "set" using gsa-xml like...
    <pre>
    <update-item item-descriptor="sku" id="sku160005">
    <set-property name="modelProfiles" value="__NULL__"></set-property>
    </update-item>
    </pre>
    Our custom calalog.xml entry for this mess looks like...
    <pre>
    <item-descriptor name="sku">
    <table
    name="the_sku_modelprofile"
    type="multi"
    id-column-name="sku_id" >
    <property
    name="modelProfiles"
    data-type="set"
    column-name="model_profile_id"
    component-item-type="ModelProfile"
    display-name="Model Profile"
    category-resource="theBasics"
    required="false" >
    <attribute
    name="resourceBundle"
    value="the.commerce.ProductCatalogTemplateResources"/>
    <attribute name="propertySortPriority" value="-55"/>
    </property>
    </table>
    </item-descriptor>
    </pre>
    As always, any help is greatly appreciated.

    You just need
    <update-item item-descriptor="sku" id="sku160005">
    <set-property name="modelProfiles" value=""></set-property>
    </update-item>

  • Clearing out previous password history

    Hi everyone! As part of our User maintenance is to clear out old user password histories. Just want to ask if there's a way that i could clear out the old/previous password history of a user?
    Thank you very much in advance!
    Regards,
    Braille

    Wow - to get a response from The John Burton, I feel so honored!
    No, John, I believe that you are talking about when you are on the Account Identification Screen. I am talking about when you have confirmed the customer and are on the Interaction Record Screen and you realize that you want to exit without adding a record. By clicking on END, it exits but creates a blank interaction record. When I click on Cancel, the screen exits to the Home Page but when the user goes into the interaction record for the next customer, the details on the botton of the screen (Last Interactions) is from the previous customer. It is as the Cancel does not clear out the previous information.
    Thanks for your time,
    Simon

  • "clearing out" iPod, handing down to wife

    Hello -
    I'm about to purchase a 60GB iPod for myself and want to hand down my 20GB to my wife. She in turn is handing down her 4GB mini to our niece.
    Anyway, how do I clear out the iPods so that the new users can start out fresh?
    Thanks a ton in advance.
    -Chris

    Hi,
    If you want to clean out your iPod, you must do the following:
    1. Open iPod updater 2005-09-06 with your iPod plugged in(or some other ones, the date doesn't really matter)
    2. Click the "Restore Button"
    3. Follow the instructions on the screen
    4. Then your iPod should be restored to factory conditions, which means that everything will be reset to when you bought your iPod.
    -its better to have the latest updater, just in case there is now updates available for your iPod.
    if any problems arise, please post the problems
    hope this helps

  • Clearing out vaults - something kendall said - clarification?

    kendall -
    in an earlier post you outlined instructions for removing projects from the library in a way that leaves thumbnails still accessible. (pasted, below) i just had one question about that method:
    you say to open the library with Show Package Contents, and then to open the project i want to remove in the same way. i'm with you so far in that regard. but THEN you say "create a smart album looking for all image types - and remove them. You are deleting all the master files" - are we still in finder here or back in aperture? can you create a smart album within the finder? you lost me on that step.
    now, when i look in package contents for an individual project i get what appears to be a few aperture info files, as well as folders for the import labeled something like "2005-12-06 @ 03/34/16 PM - 1.apimportgroup" - should i just remove those folders? however, INSIDE of that folder there seems to be a different folder for EACH SINGLE IMAGE/MASTER FILE.
    this does seem like a lot of work just to remove a project and clear off space.
    what files should i be looking for/clearing out and what files should i be leaving intact in the library for your method?
    thanks!
    msg
    Aha! Then for you there is indeed a more advanced option.
    First, you will still need to export the project and save it somewhere.
    But then the next step is this - make a top level folder in Aperture and call it "Archive". Move your project into there (to let you know not to touch it after the next step).
    Now, open up the Aperture library in Finder (Show Package Contents). Find your project inside that Archive folder. Open that project in Finder as well (same method), and create a smart album looking for all image types - and remove them. You are deleting all the master files.
    Now restart Aperture. Visiting that project you'll be able to see those images at up to 1024x680 (may differ slightly depending on the aspect ratio of your camera). All your keywords will still be there to search on. You simply can't print or export or adjust these "offline" images in any way (and the images will have an "offline" badge on them to let you know they are in that state).
    The Vault will have the full version of the project replaced by this offline version, which is why you needed to back up the project.
    Granted this is going a little off into the weeds to do this and is not officially supported by Aperture. But it's not hard to do and works pretty well for something it's not supposed to be able to do at all. More importantly the fact that so much of this works (offline badges and working projects with missing master files) means that there is a pretty clear plan from Aperture to support something like this in the future.

    <...>
    you say to open the library with Show Package
    Contents, and then to open the project i want to
    remove in the same way. i'm with you so far in that
    regard. but THEN you say "create a smart album
    looking for all image types - and remove them. You
    are deleting all the master files" - are we still in
    finder here or back in aperture? can you create a
    smart album within the finder? you lost me on that
    step.
    That was in Finder - the goal in that step is to find all of the master files in Finder and remove them. The reason to use the smart folder is that while you can go inside the project import folders where all of the images really live, each image is inside of its own directory so it makes doing it by hand rather slower than using a smart folder to find all of the RAW files that library contains.
    Because Aperture is not working with images but only editing instructions, you can be sure that any image you find under a project is probably a master file that can be removed.
    now, when i look in package contents for an
    individual project i get what appears to be a few
    aperture info files, as well as folders for the
    import labeled something like "2005-12-06 @ 03/34/16
    PM - 1.apimportgroup" - should i just remove those
    folders? however, INSIDE of that folder there seems
    to be a different folder for EACH SINGLE IMAGE/MASTER
    FILE.
    Yes, that's the case - you cannot remove those directories because the other files stored alongside the master files hold data about versions and keywords, and Aperture will not like it if they are gone! It will probably re-create them from the database (where all that data is also held) but I am not sure if the whole import folder is gone it would do so.
    this does seem like a lot of work just to remove a
    project and clear off space.
    what files should i be looking for/clearing out and
    what files should i be leaving intact in the library
    for your method?
    Indeed, a lot of work and the reason to use the smart folders to find only the master RAW (or TIFF or JPG or whatever you impotred) files and remove them quickly.
    Just to be clear about this after you have emptied out the project in this way you'll really only be able to search and view images at a fairly large size - around 1024x640 at most. You'll not be able to print or export or edit, but again keyword searches will find images in projects modified in this way. You may want to rename the prject as "ARCHIVED" or something along those lines so you know not to use it for anything "real".

  • Null Error when clearing out a search

    When I do a search, then clear out the search string, I get:
    Line: 112
    Error: 'examples.examples' is null or not an object

    Thanks for trying out Blueprint and giving us feedback!
    This bug is already on our radar. We will have it resolved for the next release!
    Mira Dontcheva
    Research Scientist
    Adobe Systems

  • How to clear out old WWV_FLOW_FILES

    I'm updating an application that does a file upload into wwv_flow_files and then puts the data into a collection which is maintained thru a series of forms.
    The application has DELETE_ALL_COLLECTIONS to handle the clearing out of the collection and our Purge Sessions is set at a day.
    The problem I see is the application doesn't have a delete for the on the WWV_Flow_Files table for the data loaded.
    How can I delete the old data, or do I have to now delete the data from WWV_FLOW_FILE_OBJECTS$ for the ID's I know should be deleted?
    Does the Admintrator tool have a purge on WWV_Flow_Files like the Purge Sessions?
    Thanks
    Edited by: spuchc on Jan 18, 2012 4:25 PM

    How do I securely delete data from the machine?

  • DNSMaint not clearing out empty records

    NW65 SP8 .DNSmaint.nlm version is 1.0 2004. We are trying to get this
    process to work. all of the parameters are set correctly and the utility
    runs. there are no errors but also none of the empty records are clearing
    out. here is the command we are using. The user created for this process has
    full rights. The partition in question has a read / write.
    load
    dnsmaint -User:dnscleaner.ccps -PASSWORD:xxxx -ZoneList:.tt_calvertnet_k12_md_us.TechTrailer.CCPS
    load
    dnsmaint -User:dnscleaner.ccps -PASSWORD:xxxx -ZoneList:.21_10_IN-ADDR_ARPA.TechTrailer.CCPS

    CCPS,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Trying to figure out appropriate SPECIAL!

    Hi All,
    Greetings! We are currently on EBS 11.5.10 and about to implement UPK.
    We are in the first step, trying to figure out which SPECIAL (1 .. 15) to use in CUSTOM.pll.
    "In-Application Support Guide.pdf" advises us to execute below commands to figure out the SPECIAL thats NOT being used.
    1 --> cd $AU_TOP/forms/US; grep -i APP_SPECIAL.ENABLE `find . -name "*.fmb" -print`| grep SPECIAL7| grep -i PROPERTY_ON
    2 --> cd $AU_TOP/resource; grep -i APP_SPECIAL.ENABLE `find . -name "*.fmb" -print`| grep SPECIAL7| grep -i PROPERTY_ON
    We changed *.fmb to *.pll in the second command. Modified comamnd is:
    3 --> cd $AU_TOP/resource; grep -i APP_SPECIAL.ENABLE `find . -name "*.pll" -print`| grep SPECIAL7| grep -i PROPERTY_ON
    After executing commands 1 and 3 (for SPECIALs 1 thru 15), we figured out all SPECIALs (from 1 thru 45) are being used.
    Please advise,
    1. if we are wrong in our above approach.
    2. if we can use MENU instead of SPECIAL in 11.5.10; if so, can we use above commands (1 and 3) with SPECIAL replaced with MENU to figure appropriate MENU to use
    All your help in this matter is much appreciated! Thanks in advance!!
    Regards,
    Vivek

    I had a similar problem when working on a long Pages doc (40,000 words).The glitch only occurred on this one Pages file and affected no other applications. I fixed it by duplicating the file, trashing the original and working on the new document. I have no idea of the cause of the problem.

  • Clear out Change Notification Registrations

    Hi,
    We are using change notification in a couple of places in our application. I forgot to add the registration removal to the deconstructors, and the database reached the maximum number of allowed registrations.
    I've fixed the code, but I want to clear out the old registrations in the database. I thought I found the correct procedure to call, but it isn't working.
    Anyone know how to clear out old registrations?
    sqlplus system/mypass@mydb
    SQL> select * from dba_change_notification_regs where username='DGRANT';
    USERNAME REGID   REGFLAGS CALLBACK                                                              OPERATIONS_FILTER  CHANGELAG TIMEOUT TABLE_NAME
    DGRANT     11220     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11220     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11221     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11221     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11222     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11222     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11223     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11223     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11224     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11224     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11225     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11225     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11226     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11226     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11227     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11227     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11228     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3556     DGRANT.RECIPE
    DGRANT     11228     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3556     DGRANT.USERS
    SQL> exec dbms_change_notification.deregister(11220);
    BEGIN dbms_change_notification.deregister(11220); END;
    ERROR at line 1:
    ORA-29970: Specified registration id does not exist
    ORA-06512: at "SYS.DBMS_CHANGE_NOTIFICATION", line 3
    ORA-06512: at "SYS.DBMS_CHANGE_NOTIFICATION", line 68
    ORA-06512: at line 1
    SQL> connect dgrant/passwd@mydb
    Connected.
    SQL> exec dbms_change_notification.deregister(11220);
    BEGIN dbms_change_notification.deregister(11220); END;
    ERROR at line 1:
    ORA-29970: Specified registration id does not exist
    ORA-06512: at "SYS.DBMS_CHANGE_NOTIFICATION", line 3
    ORA-06512: at "SYS.DBMS_CHANGE_NOTIFICATION", line 68
    ORA-06512: at line 1
    SQL> select * from user_change_notification_regs;
    USERNAME REGID   REGFLAGS CALLBACK                                                              OPERATIONS_FILTER  CHANGELAG TIMEOUT TABLE_NAME
    DGRANT     11220     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11220     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11221     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11221     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11222     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11222     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11223     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11223     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11224     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11224     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11225     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11225     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11226     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11226     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11227     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.RECIPE
    DGRANT     11227     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3558     DGRANT.USERS
    DGRANT     11228     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3556     DGRANT.RECIPE
    DGRANT     11228     2     net8://(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.30.9.74)(PORT=1005)))?PR=0     0     0     3556     DGRANT.USERS

    I had the same problem
    I revoke change notification from user than grant again and nothing has changed
    SQL> SELECT regid,
    2 table_name,
    3 callback
    4 FROM user_change_notification_regs;
    REGID TABLE_NAME CALLBACK
    42 TRADER.POSITION net8://(ADDRESS=(PROTOCOL=tcp)(HOST=127.
    0.0.1)(PORT=47633))?PR=0
    43 TRADER.POSITION net8://(ADDRESS=(PROTOCOL=tcp)(HOST=127.
    0.0.1)(PORT=47633))?PR=0
    I tried to use the code below but I got an error
    The code
    public void run () throws SQLException
    try
    OracleConnection conn = getConnection();
    conn.unregisterDatabaseChangeNotification(REGID);
    System.out.println("unregistered with id " + REGID);
    catch (SQLException sqle)
    System.out.println("Error trying to delete registration with id " + REGID);
    sqle.printStackTrace();
    The error
    Error trying to delete registration with id 42
    java.sql.SQLException: Fonction non prise en charge
         at oracle.jdbc.driver.PhysicalConnection.doUnregisterDatabaseChangeNotification(PhysicalConnection.java:10351)
         at oracle.jdbc.driver.PhysicalConnection.unregisterDatabaseChangeNotification(PhysicalConnection.java:10324)
         at oracle.jdbc.driver.PhysicalConnection.unregisterDatabaseChangeNotification(PhysicalConnection.java:10315)
         at com.oracle.coherence.swingdemo.dcn.DeregisterDCN.run(DeregisterDCN.java:29)
         at com.oracle.coherence.swingdemo.dcn.DeregisterDCN.main(DeregisterDCN.java:49)
    Does someone has a solution please ?
    Thank you for all...
    Christophe.

  • WLS 6.1 and WLS 6.1 Service Pack1 install clears out registry.xml

    Hi,
    Just thought I'd post this problem and solution in case others came across it.
    I installed WLS 6.1 and then the Service Pack 1 separately. The Service Pack
    1 install clears out registry.xml.
    I then tried to install WLI V2.1 and it would not let me install as it could not
    find WLS 6.1 SP1 the definition of which it gets from registry.xml. The error
    was WLS 6.1 SP1 not detected.
    To get around this I got sent a registry.xml and edited it to be my home machine.
    (Not the safest thing to do but it worked!).
    I think if you download WLS 6.1 and SP1 and install as one rather than separately
    this does not happen.
    Regards,
    Kathryn

    Oyvind,
    I believe using LDAPv2 with that release of Commerce Server is not supported.
    If you would like more information please contact BEA Support.
    Regards,
    Richard Wallace
    Senior Developer Relations Engineer
    BEA Support.
    "Oyvind" <[email protected]> wrote:
    >
    Hi,
    We have a problem with WLS 6.1 and LDAPRealm v2. Our application was
    working with
    WLS 6.0 and the LDAPRealm v2 patch. It is also working with 6.1 and LDAPRealm
    v1.
    When upgrading to WLS 6.1 we experience problems looking up user properties
    from
    LDAP. I put the same properties in the <CustomRealm> properties in config.xml
    as we had in the old ldaprealm.properties file.
    We are using WLCS 3.5 SP2, and we are looking up the user properties
    using the
    <um:getProperty> tag but it always returns null.
    Any idea what's wrong? This could be both a WLCS or a realm problem I
    guess?
    Below is the realm declaration in config.xml
    <CustomRealm
    ConfigurationData="user.dn=ou=People, o=my.com;server.principal=cn=Directory
    Manager;server.credential=adminadmin;user.filter=(&(cn=%u)(objectclass=person));group.dn=ou=Groups,
    o=my.com;group.filter=(&(cn=%g)(objectclass=groupofuniquenames));server.host=aaa.my.com;membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquenames))"
    Name="LDAPRealmV2" RealmClassName="weblogic.security.ldaprealmv2.LDAPRealm"/>
    Any input is appreciated,
    Oyvind

  • Unable to clear out the stock in SAP

    Hi Expert!
    Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old.  Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
    Thanks.

    hi
    do the physical inventory and adhust stock
    1) Create physical inventory doc using MI01
    2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
    3) Post the doc in Using MI07
    Note : Give the batch no if the material is activated the batch

Maybe you are looking for

  • How do I retrieve my security answers to put an iTunes card on a new touch I added to my account?

    I have had a 3rd gen touch for a couple years. I bought my son a new 4th gen and my daughter her own 4th gen touch. I added them to my account and added a $25 iTunes card to my son's. The store is asking my security answers and I have no clue anymore

  • Kapsel Logon Example - IOS 7 https issue

    Hello Experts, When i try to connect via HTTP from the cordova project "logondemo" everything works fine, when i switch to HTTPS, i have this issue on the cordova project... CFNetwork SSLHandshake failed (-9807) I tested the connection via the REST A

  • Pages not cropping or rotating in Acrobat Professional 8.3.1

    I am using Acrobat Professional 8.3.1 on Mac 10.5.6. When cropping or rotating pages in Press Quality PDFs I have created in Distiller, the operation is sometimes ignored or says can't find pages when all is selected, choosing the option a number of

  • Essbase Full Export generating erroneously large data files

    On 9.2.1. using BSO I have a 1 GB page file that routinely is exported for backups. generates 1 text file about 1.2 GB. using buffered i/o and rle compression. recently, the backup occurred as normal but generated 6 text files totaling 10GB. I did a

  • Web Calendar in Mac OS X Server 10.5

    The iCal server in Mac OS X 10.5 Server correctly records recurring events and they are visible in iCal. However, when viewed through a group's web calendar, only the first instance of the event is visible. Is there a non-default setting that has to