FXTrans Script does not clear previously translated currencies

Good morning Experts!
On Page 4 of the Document named "How to Configure Limited Currency
Translation" that was provided to me by SAP Support, with regards to the FXTrans Script, it states "The
translation process first determines what rates and currencies need to
be processed. It then clears any previous data that was generated by
earlier FXTrans processes for the same category and time scope as the
current run."
This is broken. The MultiCurrencyTranslation process is not clearing
out previous data at all. It's simply appending additional data each
time the process is run. Has anyone else seen this issue? I've run the process numerous times and our European revenue has doubled and tripled and quadrupled.
Is there a way to resolve this?
Any ideas are greatly appreciated.
Thanks!
Sean

Sean,
There is simple solution.
You can use CLEAR DESTINATION statement in the logic script.
As you know, this will clear destination so you should be careful to use this but it will clear destination and will write data.
I think it will solve your issue.
Thank you.
James Lim

Similar Messages

Copy opening does not clear the destination data - Just appends

Hi All,
Copy opening does not clear the destination data. It just appends so if i run the copy opening package twice i can see the signed data get doubled.
We have SAP BPC NW 7.5 SP08 Patch 1001.
I working on the Periodic Application.
Copy opening Script logic:
*FOR %TIME% = %TIME_SET%
*RUN_PROGRAM COPYOPENING
CATEGORY = %CATEGORY_SET%
CURRENCY = %CURRENCY_SET%
TID_RA = %TIME%
OTHER = [B_ENTITY=%B_ENTITY_SET%]
*ENDRUN_PROGRAM
*NEXT
Carry-forward business rules
Source account : BALANCE SHEET ACCOUNTS
Source flow : F99
Dest account :
Dest flow : F00
Reverse sign : FALSE
Data source type : ALL
Same period      :FALSE
Apply to YTD : False
Category dimension:
ID               ACTUAL               BUDGET
EVDESCRIPTION          Actual               BUDGET
PARENTH1
YEAR               2008               2011
COMPARISON          BUDGET               NBUDGET
STARTMTH               1               1
CATEGORY_FOR_OPE                    ACTUAL
FX_SOURCE_CATEGORY
RATE_CATEGORY
RATE_YEAR
RATE_PERIOD
FX_DIFFERENCE_ONLY
OPENING_YEAR
OPENING_PERIOD
OWNER               [ADMIN]               [ADMIN]
STORED_CALC
REVIEWER_CAT
Appreciate any help.
Regards
Mehul

Snote 1620613 has fixed the issue
Regards
Mehul

Script does not pick up values as intended

Hi
I have written a CALC routine where in i want to do the following:
-If there is any input done for that rate in the month, the routine should do nothing
- If there is no input in that rate account in the month, it should pick up the previous period data.
But this IF condition does not work and I have not been able to understand why so.
Can someone pl tell me what goes wrong in the below script?
If i remove the IF command the script works (but if then overwrites any input made for the period)
SUB Exch_Rate_Cf
'carry forward of composite exchange rates for FA Opening Balances
IF HS.GETrate("A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE]") = "0" THEN
IF HS.PERIOD.MEMBER = "JULY" THEN
HS.EXP "A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE] = A#Exch_EquCap.Y#Prior.P#Last.I#[ICP None].C3#[NONE].C4#[NONE]"
ELSE
HS.EXP "A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE] = A#Exch_EquCap.P#Last.I#[ICP None].C3#[NONE].C4#[NONE]"
END IF
else
END IF
END SUB

Hi
I have tried both the approaches.
"JUL' does not work as we have given JULY as the dimension member name
The other approach also does not result in any result being calculated --- i think something is going wrong and the script does not go into the IF condition itself :(

Error: country se does not store a hard currency

Reg: country SE does not store a hard currency
Hi
The Above error messages is displayed when i am trying to do foreign currency revaluation setting under TCODE - FAGL_FC_VAL And my co code country is IN but the error message shows for country SE, can any one please give me a solution for the above
Thank you
Charan

Check the following notes:-
Note 81319 - SAPFGVTR: GI806 error in currency translation
Note 135956 - FI-SL: Error GI806 or GI807
thanks
G. Lakshmipathi

HELP NEEDED. Plugin container stopped working / Script does not respond

Hi!
I am aware that there are numerous articles about this problem, but unfortunately none of them solves my problem.
Very frequently, at least once a day (usually from 3 to even 7 times a day) my Mozilla Firefox freezes and I am forced to restart it. It typically occurs when I try to open a page with some interactive content in it (youtube, some fancy flash pages, even gmail document preview). When I try to close it, Windows pops up a message saying that "Firefox stopped working" and terminates the application itself, and then another window pops up, saying "Plugin Container for Firefox stopped working". It's usually either that, but sometimes Mozilla also shuts itself without any warning and the same message appears.
As for "script does not respond", it does happen as well, although way more seldom. Usually it happens on the pages with lots of images. The whole browser then freezes for couple of seconds, then it pops up a window saying that the script does not respond and asks whether I want to force it to continue or not. It doesn't make any difference which option I choose because usually the browser crashes anyway.
I am using version 34 and I made sure all my plugins and addons are up to date. I also disabled hardware acceleration and tried to reinstall whole flash thing. I wonder whether it's the fault of one of my addons, but I admit I am not too eager to try and disable them all and then test it one by one because it would take up way too much time.
Apart from that, none of the previous solutions seem to help, and the problem really gets on my nerves because numerous times I lost a huge block of text I was writing. Now I learned to copy everything I write couple of times :/
Maybe the crash reports will help. I'll link them from the newest to the oldest (for some weird reason they are 3 crash reports from today, yesterday and 3 days ago - weird, because the browser has shut itself today at least twice, not to mention previous days):
https://crash-stats.mozilla.com/report/index/ba7f5087-3d7d-4b2c-b9b1-04e6d2150105
https://crash-stats.mozilla.com/report/index/72eaf792-5f06-445b-806c-cd7922150104
https://crash-stats.mozilla.com/report/index/c3f81ff8-df10-45a6-8400-1c5912150103
I'll be glad for any help because, honestly, I can't stand it anymore. No reinstalling of Firefox or restoring settings to default have helped me yet.

Hmm, that's pretty bad. Often if Windows is stepping in with the crash report, then the issue is with a driver incompatibility, most commonly a display driver.
Here are a couple things to try:
(1) Disable Firefox from using hardware acceleration
This is the traditional workaround. You can use:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
That takes effect the next time you exit and start Firefox up again, which the way you describe it, might be quite soon.
(2) Disable the Flash player plugin from using hardware acceleration
This is a separate setting. See this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable the Flash plugin's protected mode feature
Protected mode has security benefits, but is not compatible with all systems for some reason. It can stall scripts on some systems, for example. You can disable the feature by creating or editing a settings file. The following pages/posts provide different approaches:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078 (alternate version of Carm's batch file with a few changes by me: [https://onedrive.live.com/?cid=f7d304d92388737d&id=F7D304D92388737D!336&ithint=file,.bat&authkey=!AP2FXW2Y_3BXZyo])
Any improvement?

FINSTA Bankstatement does not clear Open Items

Dear SAP guru,
I am experiencing an issue where FINSTA bankstatement generated in IHC module does not clear Open items in reciving company code. I would like to get the system to search for the document based on the original FI document number and clear it. The situation is
The bank statement successfully processed has an original document number and processed.
In IMG for EBS, I configure as algorism used is 20 - Document number search and Bank Posting type 4: Clear Debit GL account
Clearing account - and have the posting with relevant document number matched with the bankstatement.
It seems that the system does not find the matching at all.
Could any of you shed some light on what I am missing???
Kind regards
Taro

Creating or even using something like a data migration account is the best way.
Are you saying that you have a GL account with say 100 line items and you want them all cleared. If that is the case you wont need a LSMW, make sure you know the amount, and then create a journal posting to your new GL account, and select all items in the GL account you want to clear.
If there are various GL accounts, again no real problem, in F-03 which is what you would be using, you can enter more than GL account so that should not be an issue.

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.

Script does not get called

Hi there, I am trying to setup a quad view on my stage by
placing 4 sprites on the stage with the same 3D cast member. I then
apply a behaviour script that initalizes the 4 sprites in their
correct positions and sets up the 4 different camers as follows...
topView
perspView
sideView
frontView
... however, doing so, the script gets called only on the
first sprite and the other 3 sprites do not react with the
behaviour script. As a matter of fact, I also have a sendAllSprites
command inside the behaviour script and it does not send the
message to all of the sprites with that piticular behaviour script.
Is the reason why the behaviour script does not work on the other 3
sprites because I need a diferent 3d castmember for each
sprite?

Hello,
You don't need to place 4 sprites of the same W3D cast member
in the score.
1- Place a single occurence (sprite) of the W3D cast member
in the score
2- Create 4 cameras either in your 3D package or by code
using member.newCamera():
topView
perspView
sideView
frontView
3- Set the rect of the four cameras so they correspond to
each corner of the screen
4- Use sprite.addCamera() in order to add the four cameras to
the W3D sprite
That's all you need.
Best regards,
Karl Sigiscar.
http://www.chromelib.com

MQ Adapter does not clear the rejected message from the queue

Hi All,
I'm using a MQ Adapter to fetch the message from the queue without any Backout queue configured. However, whenever there is any bad structured message found in the queue, MQ adapter rejects the message and moves the message to the rejmsg folder but does not clear it off the queue, as a result of which it keeps retrying the same hence, filling the logs and the physical memory. Somehow we do not have any backout queue configured so I can move the message to blackout queue. I have tried configuring the jca retry properties and global jca retry as well but to no avail.
- Is it not the default behaviour of MQ Adapter to remove the rejected message from the queue irrespective of Backout queue is configured or not? The same behaviour working well with the JMS and File Adapter though.
- Is there any way I can make MQ Adapter delete the message from that queue once it is rejected?
Regards,
Neeraj Sehgal

Hi Jayson,
Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
Please check that the JDK compliance level is at 5.0
Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
Set the installed JRE to the one you have mentioned JDK 5.0 update 16
Window->Preferences->Java->Installed JRE's->
Click on the add button to select the path of your JDK.
once completed click on the check box next to it.
regards,
AKD

After hiighlighting a word and pasting it into another document, the clipboard does not clear ;when I hit enter it pastes again and again. How do I fix it?

When I highlight a word or phrase and copy to the clipboard, then paste it in another area the clipboard does not clear the phrase. Therefore, every time as I type and hit the enter key it continues to paste the phrase all over my document. I do have the latest download of Firefox installed (16.0, win 7 and that is when this started. How do I stop this obnoxious behavior so I can type a sentence with normalcy?
Louise

Thank you, Iusually do that first thing with any computer problems. Old school computer fix. Hard Boot regardless! lol Thanks again.

ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

Dear,
i 've got this error when i tried to upload my book using iTunes Producer and i don't know how to solve it
if any one know the solving please inform me
ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

Hello ModernGuide
For specific issues with uploading your book and dealing currency, you will want to contact Apple Directly and the article below will have contact information for phone support or support through email.
Authors & Book Publishers: Frequently Asked Questions
http://www.apple.com/itunes/content-providers/book-faq.html
Apple provides support to iBooks Store authors and publishers via email and phone:
Send an email to [email protected]
If you have an Apple ID enabled for iTunes Connect, you can contact the iBooks Publisher Support team by phone, Monday through Friday from 7 a.m. to 5 p.m. (PT). Local phone support is available in English in the countries listed below
Austria, Australia, Denmark, France, Germany, Italy, Netherlands, Norway, Spain, Sweden, U.K., U.S.
Regards,
-Norm G.

Phone reset does not clear status screen

we have a couple of applications that reset the phones. we have noticed that a reset on a 7941 does not clear the display (that is, the old message "Resetting, please wait ..." remains on the screen). The 7940s and 7960s are fine. does anyone know why this is?
Version in use is:
Load File TERM41.7-0-2SR1S
App Load ID Jar41.72-1-0-1.sbn
JVM Load ID cvm41.72-1-0-1.sbn
OS Load ID cnu41.72-1-0-1.sbn
Boot Load ID boot41.3-2-2-0.bin
I also have tried SCCP41.8-2-2S
And SCCP41.8-0-4SR3AS
(These are the latest available on CCO)

Marc,
The Factory reset or Restore to Factory defaults is geared towards the "Configuration" of the DMP. The contents within flash are not removed as you have seen. The FAQ that you reference is a good way to remove the files if so desired. So the DMP is working as designed.
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
. Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error .*
As suggested by Dean Q I used INCLUDE mm_messages_mac,
tried im_item->set_foreign_trade( ls_mepo_eipo) still when a valid Commodity code is entered after an invalid one it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method PROCESS_ITEM. Any help is welcome
Nivedita

Hi,
In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
Regards,
Poornima

Task does not run with transaction currency

Dear All,
When i am executing IU AR/AP elimination, I am getting error " Task does not run with transaction currency ("per TC" option reset) "
Message no. UCF5104
Diagnosis
The present task is configured so that no values are analyzed in transaction currency. However, the option "per transaction currency" is selected in the method definition. This only makes sense if you also want to analyze the values in transaction currency.
System response
The task is being executed without the option "per transaction currency".
Please advise me how to resolve the issue.
Regards,
Malani

Dear Dan,
I would like to know what will be the effect if we remove o-Per Currency option in Method.
I would like to know, in the document also in properties tab - in Key figures - Check box - Transaction Currency. If i select the warning message not coming. So kindly let me know what exactly check box -Transaction currency is used in Document type and whether it is interlinked with Method.
Thanks
Malani

Defered COGS does not clear

Hi Gurus,
I am seeing sporadically DCOGS account does not clear causing balance in GL . I am looking to see problamatic transactions from GL.
I have done sanity check from Cost Management with COGS Process , Revenue Recognition and Generate COGS Events. All looks good
Here is the case - I have the DCOGS GL account having the balance. I can drill down but how to identify which are the transactions thats causing this balance?
Drill down shows all the transactions but doesnt have capability to show stuck transactions. Are there any tables that helps in seeing this details?
Any one who has more inputs on this issue , I appreciate the help.
Thanks
Raghavendra

Hi Raghavendra,
You may benefit from the following oracle support document:
Identify the Sales Order Issue Transactions that have been finally accounted but have no Revenue Recognition Transactions i.e. COGS or DCOGS (Doc ID 1616456.1)
However, functionally, I usually like to track deferred COGS through "COGS Revenue Matching Report" as it gives me direct information on what orders have been earned (revenue recognition) and still have DCOGS
"This report in Cost Management responsibility"
Hope this helps you
Regards

FXTrans Script does not clear previously translated currencies

Similar Messages

Maybe you are looking for