G4 power brick with Intel mac mini? is this possible just to test?

A friend gave me an Intel mac mini, 1.60GHz CPU model, but no power supply.
I tried using my G4 mac mini's 85W A1105 power supply on the intel mac mini but nothing happens. I have to unplug the power supply from the wall to get it to power on my G4 mac mini (it apparently doesn't like being plugged into the intel mac mini).
Is it possible to use the G4 2005 power supply with the Intel mac mini if only to just test to see if the intel computer works? I don't want to buy a MA407LL/A 110W intel mac mini power supply only to find that the computer he gave me is broken.
Just wondering if anyone had any tips/ideas how to tell if the Intel mac mini works at all or if I'm just going to have to find someone who has the 110W intel model supply to test it...

The G4 mini power supply is rated at a significantly lower current capacity than the Intel mini requires, thus while some have had marginal success in using an old supply with a newer system, almost any tolerance variation will mean the Intel box won't run with the G4 supply. Not only that, but since the Intel system will load the G4 supply at a level it was not designed to accommodate, you could damage your G4 supply by trying.
If you have an Apple store in your area, I would take the Intel mini to the genius bar there where it can be tested, thus avoiding you having to buy a new supply without knowing if it will work.

Similar Messages

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
I can't figure out how to get this to work. Is it possible?

WildBull wrote:
Will it work if I connect via usb instead of firewire?
No. There is no "USB Target Disk Mode".
Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

Normal + 3 chimes at startup with intel mac mini

I posted this in the mac mini forum, but didn't get a helpful response. So maybe someone can help me here.
I have a 300GB USB drive (formatted as Mac OS extended (journaled)) connected to my intel mac mini with the drive's power on all the time. When I start up the mini after the USB drive has spun down I get the regular startup chime plus 3 lower volume startup chimes. The activity light on the USB drive flashes during the 3 chimes. Then the system starts normally with the USB drive icon on the desktop. I can read and write to the USB hard drive with no problems.
If I shutdown the mini and start it up again but now the USB hard drive has not spun down, I get just the normal single chime. Also, if the USB drive is disconnected, I get the normal single chime. I've tried a different USB port, but still got the same behavior.
I've connected a USB flash drive, but it exhibits normal behavior, that is, just the single startup chime.
Are the subsequent 3 chimes at startup OK and just telling me that there is an external hard drive? Or is there a looming problem? Has anyone else experienced this?
Intel Mac Mini Core Duo Mac OS X (10.4.7) Apple BT Mouse & Keyboard

Thanks. But the article says you won't hear the normal startup chime but some number of beeps if there is a problem with 3 beeps meaning no good banks.
I hear the normal startup chime, then 3 of the same chimes but at lower volume. Must be something about the USB hard drive.
When I bought the drive, it was formatted for windows with NTFS. I used disk utility to format is as Mac OS Extended (journaled). I've copied about 100 GB of data to it.

Need help with Intel Mac mini... potential logic board failure...

Hey everyone! For the past couple years, I've been using an Intel Mac mini which I was able to afford before rough times hit for me. It has been a champ for a long time, until recently. In the past week, the clock would lose time ever so often, and last week, whenever I'd try to power it up in the morning (as I shut it down every night), it wouldn't start up most times (meaning, you hit the power, nothing... no LED, no fan, nothing on screen, nada). After a while, I would somehow manage to get it to start. I assumed at this point, the lithium battery (coin type CR2032, not the traditional 1/2 AA purple battery) was shot. Since I'm in the middle of a job transition, I was waiting until I had time to put in a new battery, which I was planning to do this weekend. Then Wednesday happened...
I go to start it, nothing... A week before this, I started losing time and sometimes it would not boot. I figured eventually I would be able to start it since I was able to sometimes get it to start after a half hour or more. That didn't happen. So I decided to go ahead and swap in the new battery. I do that, power it up, nothing. I reset the SMC (same as PMU on the PPC Macs), to no avail. I reseated the RAM, and did everything I could think of, but it's deader than Elvis. I also had took the power supply to a guy who had a voltimeter. He said voltage was getting to all pins.
I went back and read some of the archives on this board. Someone mentioned something about a repair exception. It mentioned that sometimes if you call AppleCare (even if you don't have it) and ask for a repair exception, sometimes they'll agree to have the logic board replaced due to it being a documented problem. How true is this and who should I contact?
Can anyone suggest anything here? If I can't revive the mini, I may have to drag my iMac back out and try to set it up to run OS X. I can't no where near afford another computer at this point. I'm praying the mini can be fixed. I would appreciate any and all suggestions!
Thanks in advance!
Tommy

It does sound like the logic board has gone bad. However, there are no current repair extension programs open on the Mac Minis.
This page lists the open extensions:
http://www.apple.com/support/exchange_repair/
So that's not an option. I assume that the Mini doesn't have AppleCare (whoops.), so I would not count on Apple covering it, but it's always worth a shot. You can call AppleCare (1-800-275-2273) or visit your local Apple Store

Experimented: iPS with latest update "conflicts" with Intel Mac mini

Hello everyone.
Please see my earlier post first as "background story":
http://discussions.apple.com/thread.jspa?threadID=602573
So I have 2 1Gb iPod Shuffles, one mine, one my sister's. My sister's, the 1st time I plugged into her new Intel Mac mini, it asked for an iPod Update, I clicked "Yes" and proceeded with the update.
After that, I set the iPS with Disk Mode, it appears on the Desktop, when I launched or inside iTunes, once I hit the "Autofill" button, the shuffle unmount and disappear from the desktop immediately, leaving behind a 'warning message' with red exclamation mark, the same when you pull out a thumb drive or turn off an external drive, without unmounting them first.
My own shuffle, I did not apply the latest iPod Updater
When I bring the 2 iPS to my own iMac G5, both with same settings (Disk Mode etc) mounts perfectly on the Desktop, inside iTunes, I can 'Autofill' BOTH shuffles.
When I plug my non-updated shuffle into my sis's Intel Mac mini, it mounts nicely, and when hit with Autofill, it does so nicely without "self-unmounting" at all.
So in the end? I swap my shuffle with my sis, and make sure she never ever update the shuffle, at least for the time being.
So what does this show?? That the iPod shuffle with the latest update may have a conflict of instability with Intel-based Macs??
Thanks and cheers

Hi Howwow,
To add a detail: my updated Shuffle works like a charm on my old iBook and not on my new Intel MacBook. So I am convinced it is in the Shuffle/Intel combination. I did try undoing the update on the shuffle (reverting back to 2005-11-17), but that made no difference on my Intel MacBook.
Regards

Harmon Kadon Soundsticks (1st gen USB) works with Intel Mac mini?

Hello all!
Sorry if I've asked this before, but not much response the last time, just like to ask if anyone has the 1st gen USB Soundsticks that works with the Intel Mac mini?
Thanks and cheers

Hi.
I have Soundstick (USB). It does not work with my G5 and Intel MacBook Pro, just let you know. I am trying to find resolution. If you know any, please let me know.
Yasunori

Using External Boot Drive with New Intel Mac Mini

I have a 1st Gen MacMini and use an external 7200 RPM Lacie drive as the system boot drive along with all the applications.
If I were to purchase a new Intel Mac Mini, is it possible to use the current external drive as the system drive or is there some conversion steps that would be necessary ?
Thank you.

You can use the hardware, but will have to repartition and reinstall the OS from the disk shipped with the new Mac Mini.
http://docs.info.apple.com/article.html?artnum=303220
If you create a disk image of the Lacie on your Mini, you can later use setup assistant to restore users and applications from that image.

Can't find Laserwriter 4/600 on network from Intel Mac mini

Problem: Cannot find/print to networked LaserWriter using Airport network.
Kit: Mac mini 1.66 GHz Intel Core Duo, 512 MB running Mac OS 10.4.5; Silver Apple Airport Base Station unExtreme; Netgear 814 combined switch/router/DSL modem; Asanté LocalTalk-to-Ethernet Adaptor; Apple LaserWriter 4/600PS.
Method: Airport bridges from wireless (Mac mini) side of network to wired (LaserWriter) side via hub/router.
This setup worked perfectly for many years but did not survive the encounter with Intel Mac mini.
Resolution attempted: Carried out detailed instructions involving switching devices off and on in strict order, using Printer Setup Utility etc.
These instructions are posted on Asanté website:
http://www.asante.com/forums/topic.asp?TOPIC_ID=3164
Getting this to work requires that the Ethernet connection be switched from AirPort to Built-in Ethernet and that the computer be physically connected to the hub by an ethernet cable. The unwanted effect of this is that it denies wireless access to network/internet services formerly enjoyed by Mac & PC computers.
Running the identical Asanté routine with AirPort rather than Built-in Ethernet as the connection method results in the loss of the LaserWriter to the network.
Any ideas?

You can rest assured that printing to a AppleTalk
printer through wireless network is way down on the
list of things that is ever going to be tested in the
labs.
Point taken. I'm just curious about what might be going on.
Since I can't test here - the only thing I can do is
think of possible differences between your two
networks (wired and wireless)
I'm not an expert but as I understand it the Intel Mac mini should "see" the network as a single contiguous entity. In other words the AirPort Base Station that bridges between the wireless and the wired parts of the network should be entirely transparent, so I think the answer to your next question is yes.
Is your network flat (sameIP address range and routes
wireless as wired)? I could see issues if there were
a firewall or you had separate networks set up (you
can have different networks that talk to each other
through gateways and routing - but things like
Bonjour/Rendezvous and if my rusty memory is to be
trusted - Appletalk too - depends on things being in
the same "network" for broadcast packets to get to
everyone.)
Again, I don't know if it proves anything but when I had another computer on network here, the IP address assigned to it by the router was within the specified range. This machine is getting on for three whole years old, has begun to self-destruct and so it's gone for repair under the last gasp of its AppleCare warranty extension.
The Intel Mac mini can also "see"/print to a Bonjour wireless printer. This may also answer your question about the possibility there being two networks here rather than one. On the other hand, I guess that the ability to print to the Bonjour device does not involve any bridging between the wireless and wired parts of the network, so this may not be relevant.
If the concept of different networks does not make
sense - open up the Network Utility application and
post the results of your "Display routing table
information" from the netstat section...
Finally, here's what Network Utility, Netstat comes up with:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.1 UGSc 20 55 en1
127 localhost UCS 0 0 lo0
localhost localhost UH 17 199665 lo0
169.254 link#5 UCS 0 0 en1
192.168.0 link#5 UCS 2 0 en1
192.168.0.1 0:9:5b:46:64:3 UHLW 19 17 en1 1177
192.168.0.3 localhost UHS 0 0 lo0
192.168.0.255 link#5 UHLWb 1 12 en1
Internet6:
Destination Gateway Flags Netif Expire
localhost link#1 UHL lo0
localhost Uc lo0
localhost link#1 UHL lo0
link#5 UC en1
ray-thomsons-compu 0:14:51:ef:99:b1 UHL lo0
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
I hope it makes more sense to you than it does to me!
Kind regards,
Ray
PowerBook G4•1GHz•512MB•15•AirPort unExtreme Mac OS 9.2.x

How to share an usb-connected Windows Vista Printer with a Mac Mini

Hi,
I own a laptop Sony with Windows Vista (64) which has a printer connected via USB. I recently purchased a MAC MINI (middle model) and wanted to use my laptops printer for printing from my Mac mini. is this possible? thanks. Mx

Hey there Max,
If you can’t find the printer in the network browser, it may be easier to add the printer manually using the URL field, as shown in the article below.
Mac OS X: How to manually add a Windows shared printer - Apple Support
Ciao,
-Jason

Intel Mac mini: Power LED Brightness

Hi,
I've discovered a quirky little 'feature' with my new Intel Mac mini. The brightness of the power LED varies with the time of day - late at night the LED is dimmer that first thing in the morning.
I've verified this by changing the clock time manually and sure enough as soon as I click save the brightness changes.
This didn't happen with my previous PowerPC mini. Anyone else noticed this with the new Intel minis?
Thanks,
Nina
Mac Mini Intel Core Duo 1.66GHz Mac OS X (10.4.5)

Thanks
I noticed it when the PowerPC and Intel minis were side by side one evening and my initial thought was that maybe it's just a duff LED. This morning it was back to full brightness and now tonight, it's dim again. So yeah, I just guessed that is was related to the time.
Nice article btw, highly amusing
Mac OS X (10.4.5)

Will a Saittek Eclipse usb keyboard work with an Intel Mac Mini?

The Saittek Eclipse is my favorite keyboard.
Anybody know if it will work with an Intel Mac Mini.
Box only says Windows, but I'm just wondering if everything except volume controls will work fine? (it is also illuminated, with a light level control, but I'm guessing this shouldn't matter with Windows vs OS X?)

I am a writer though and a photographer (strictly point and shoot) for a couple of orgs. I just don't want o run out of space. And I hate!! slow response time.
Is the i5 adequate as well?
Glad to have found an Apple guru so quickly. May very well buc you more in the future.

Intel Mac mini as a faxserver with more then one USB-Modems?

Hi there,
does anybody have a clue if this idea will work?
We plan to buy a Intel Mac mini and someone had the idea to use it additionally as a faxserver - BUT, we'll need more the one fax-line. So, I wonder if it is possible to buy 3 or even 4 external USB-Modem from Apple to use all of them.
Does anyone tried this before?
Any comments are welcome!
Thanks in advance, Chris.
Mac mini Core Duo, 2GB, 120GB Mac OS X (10.4.5)

Hello Chris,
incl. a four line fax-card. Why isn't it a good
choice?
From my experience the Mac's make a terrible fax machine.
I have tried receiving faxes with a 1.8 GHz iMac G5 (with built-in modem), a 2.0 GHz iMac G5 (with built-in modem), and my 1.25 GHz Mac Mini (with built-in modem).
In every single case, and experiment, they dropped the fax after the first page.
So, that means that I've gone round and round trying to get beyond the first page received without trouble.
I do have a real fax machine, and never have any trouble receiving faxes on the same line with it. So, I only use the computer as a fax when I want to only receive the first page (for example the many local doctors who send me their customers private details).
In the case of the doctors, my phone rings frequently with customer's private details. All I want is the first page so I can call the doctor and tell them to quit sending me faxes.
They will send, send, and re-send until a fax machine answers. It keeps the phone busy all day if I don't receive the fax.
But, it costs money to receive the 30-page faxes just to stop the phone ringing. So, I let the computer capture the first page, and then call them and demand that they quit calling me (which works for a couple of days).
You wouldn't believe the information they have sent me. And, with an older doner-film fax, a 30-page document is mighty expensive.
What really gets me, is when they had the nerve to request me to invest even more money and pay to mail the fax back to them. I tell them their free to drive here and get it, otherwise, it's going in the garbage.
I can tell you from experience, that your medical records are not safe with a doctor. They just assume they are dialing the right number, and will send your entire personal history (and even family history - I've received generations of information) to just about anyone with a fax machine.
Anyway, now that I explained how I use mine, I hope you can better understand why a real fax machine is going to serve you better.
The tolerance of a real fax machine will prevent you from constantly trying to receive the same fax over and over and over again.

What 32inch plus tv to buy in the UK to use with new intel Mac mini

As the title - What 32inch plus tv to buy in the UK to use with 1.83 intel Mac mini. It does not have to have freeview as I will be using tubestick. I do want to use the hdmi connection. Who's got a great setup, with no issues - model numbers appreciated £1200 ish budget

So everything is working normal except for screen saver? Hmm. That's odd. Perhaps your settings are such that shortly after the screen saver kicks in the mini is also set to go to sleep. That would cause the screen to lose sync and give the "no signal" message. Check your Energy Saver against the Screen Saver settings and adjust the sleep interval if need be.
FYI, running a screen saver on an LCD TV is not a good idea long term. An LCD uses a lamp as a backlight, and the lamp has a finite lifetime. Consuming it's limited hours of life by running a screen saver all the time (like overnight, everynight) will shorten considerably the service life of your TV.

Intel Mac Mini stuck in reboot loop

I just upgraded the hard drive in my 2007 intel mac mini core duo. Drive formatted successfully, contains GUID Partition Table.
OSX 10.5 installed successfully.
Machine rebooted, I ran software update to 10.5.7 successfully.
Upon installing Adobe Flash Player, Adobe Acrobat Reader, machine began to react slowly to commands.
Rebooted machine, went to Grey Apple Screen with spinning dash wheen icon.
Machine rebooted itself, once again going to the grey apply screen with the spinning wheel.
After about 15 minutes of letting the continual reboot cycle happen, I inserted the installation DVD for 10.5, held the power button in to power off the machine, and booted from the disk.
I ran disk utility. Disk Utility shows the hard drive, shows the partition (GUID Partition) correctly.
I Verified Disk, which verified as "OK"
Repaired permissions.
Restarted machine.
Once again, it loaded to the grey apple screen, stayed there with the spinning dash wheel for about 3 minutes then continued to reboot over and over (everytime it reboots it sticks on the grey apple screen for 3 minutes before rebooting.
I once again powered off the machine and reset the PRAM.
Machine stuck again on reboot cycle.
I powered off the machine and reset the mini's SMC.
Machine is still stuck in reboot cycle.
I have also taken the mini back apart and verified that all RAM and connections are seated properly.
Any advice on what to do at this point will be very helpful.

+And I promise I will not download and install a hundred different programs this time.+
Good idea.
Any time you install software in OSX, there is a small, but finite, chance that the installation process won't be able to access a needed file because it is in use. This can mess up pre-binding, or even prevent files from being updated.
So the best advice is not to run any other programs while doing software installs or updates. And when in doubt, run DiskUtility afterwards and fix permissions one more time.
I cringe whenever I think of a post I read a while back about a Mac user who boasted about what music he likes to run in iTunes while doing system software updates. Not a good idea. It's "Russian roulette" with maybe 99 blanks in the "gun", but one real bullet that can kill your Mac's installation.

Bluetooth Not Available on Intel Mac mini

I keep losing the Bluetooth wireless connection between my Apple wireless mouse and keyboard and my Intel Mac mini (which is running Mac OSX 10.5.5)
Tried re-booting but it doesn't always come back.
Looked in System Preferences, but if the connection is lost, Bluetooth has disappeared as if not installed. If the connection is present then all seems OK. You can check battery levels etc.
Left to itself Bluetooth can re-appear sometime later as mysteriously as it disappeared, maybe after half an hour or so. Very annoying as I have to result to using an Apple USB mouse and keyboard when the connection is lost.
Tried running Bluetooth Updater but it says I haven't got Bluetooth if the connection is lost! But it came pre-installed on purchase. Problem only seems to have started since upgrading to Leopard. Never had this problem with Tiger.
Any thoughts would be most welcome.
regards,
BJ

Ok, I've resolved this on my machine, at least for the time being.
Here is what I did. I am not advising anyone else to do this and I am in-no-way stating this will fix your problem. I'm just relaying what worked for me. If anyone chooses to try this then it's on their own head!
I opened my Mac Mini and located the Bluetooth circuit board just in front of the rear power button. I removed the small phillips screw holding the board in place and noticed that the connector that connects the board to the main motherboard was not seated well. I removed the connector and reattached it, making sure I felt the 'click' as the connector was pushed home.
I had also read on the net that the routing of the bluetooth ariel cable may cause problems due to interference from the USB ports. I took the opportunity to extract the ariel and run it over the disk and away from the USB ports. Before putting the lid back on I booted up to check Bluetooth was working again.
So, I now have my Mac Mini with Bluetooth working again. We shall see how long this lasts - perhaps the root cause was a loose connection, in which case it may be fixed permanently now. I shall report back in a few weeks.
Be aware that opening your Mac is going to invalidate any warranty. Mine was out of warranty anyway so I was not bothered. I've also got a degree in software and electronic engineering so know my way round the insides of computers. Please make your own assessment of your level of expertise before deciding to try what I did. It may not work for you anyway!

G4 power brick with Intel mac mini? is this possible just to test?

Similar Messages

Maybe you are looking for